序号

标准号

标准英文名称

1

ISO 6412-1:2017

Technical product documentation — Simplified representation of pipelines — Part 1: General rules and orthogonal representation

2

ISO 6412-2:2017

Technical product documentation — Simplified representation of pipelines — Part 2: Isometric projection

3

ISO 6412-3:2017

Technical product documentation — Simplified representation of pipelines — Part 3: Terminal features of ventilation and drainage systems

4

ISO 6708:1995

Pipework components — Definition and selection of DN (nominal size)

5

ISO 7268:1983

Pipe components — Definition of nominal pressure

6

ISO 9311-1:2005

Adhesives for thermoplastic piping systems — Part 1: Determination of film properties

7

ISO 9311-2:2011

Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength

8

ISO 9311-3:2005

Adhesives for thermoplastic piping systems — Part 3: Test method for the determination of resistance to internal pressure

9

ISO/TR 10465-2:2007

Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) — Part 2: Comparison of static calculation methods

10

ISO/TR 10465-3:2007

Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) — Part 3: Installation parameters and application limits

11

ISO/TS 10465-1:2007

Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) — Part 1: Installation procedures

12

ISO 10802:1992

Ductile iron pipelines — Hydrostatic testing after installation

13

ISO 10804:2018

Restrained joint systems for ductile iron pipelines — Design rules and type testing

14

ISO 10931:2005

Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Specifications for components and the system

15

ISO 11295:2017

Classification and information on design and applications of plastics piping systems used for renovation and replacement

16

ISO 13056:2011

Plastics piping systems — Pressure systems for hot and cold water — Test method for leaktightness under vacuum

17

ISO 13845:2015

Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection

18

ISO 13951:2015

Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading

19

ISO 14617-3:2002

Graphical symbols for diagrams — Part 3: Connections and related devices

20

ISO 15493:2003

Plastics piping systems for industrial applications — Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) — Specifications for components and the system — Metric series

21

ISO 15494:2015

Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system

22

ISO 15853:1999

Thermoplastics materials — Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding

23

ISO/TS 15874-7:2018

Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 7: Guidance for the assessment of conformity

24

ISO 15875-1:2003

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General

25

ISO 15876-1:2017

Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General

26

ISO 18468:2017

Ductile iron fittings, accessories and their joints and valves — Epoxy coating

27

ISO 21003-1:2008

Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General

28

ISO 21003-5:2008

Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system

29

ISO 22391-1:2009

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 1: General

30

ISO 22391-5:2009

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 5: Fitness for purpose of the system

31

ISO/TS 22391-7:2018

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 7: Guidance for the assessment of conformity

32

ISO 1127:1992

Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length

33

ISO 3305:1985

Plain end welded precision steel tubes — Technical conditions for delivery

34

ISO 3306:1985

Plain end as-welded and sized precision steel tubes — Technical conditions for delivery

35

ISO 3545-1:1989

Steel tubes and fittings — Symbols for use in specifications — Part 1: Tubes and tubular accessories with circular cross-section

36

ISO 3545-2:1989

Steel tubes and fittings — Symbols for use in specifications — Part 2: Square and rectangular hollow sections

37

ISO 4179:2005

Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining

38

ISO 4200:1991

Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length

39

ISO 5252:1991

Steel tubes — Tolerance systems

40

ISO 8179-1:2017

Ductile iron pipes, fittings, accessories and their joints — External zinc-based coating — Part 1: Metallic zinc with finishing layer

41

ISO 8179-2:2017

Ductile iron pipes, fittings, accessories and their joints — External zinc-based coating — Part 2: Zinc-rich paint

42

ISO 8180:2006

Ductile iron pipelines — Polyethylene sleeving for site application

43

ISO 9329-1:1989

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties

44

ISO 9329-2:1997

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties

45

ISO 9329-3:1997

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 3: Unalloyed and alloyed steels with specified low temperature properties

46

ISO 9329-4:1997

Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 4: Austenitic stainless steels

47

ISO 9330-1:1990

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties

48

ISO 9330-2:1997

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties

49

ISO 9330-3:1997

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties

50

ISO 9330-4:2000

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties

51

ISO 9330-5:2000

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties

52

ISO 9330-6:1997

Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes

53

ISO 10332:2010

Non-destructive testing of steel tubes — Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness

54

ISO 10803:2011

Design method for ductile iron pipes

55

ISO 10893-10:2011

Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections

56

ISO 10893-11:2011

Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections

57

ISO 10893-12:2011

Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes

58

ISO 10893-1:2011

Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness

59

ISO 10893-2:2011

Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections

60

ISO 10893-3:2011

Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections

61

ISO 10893-4:2011

Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections

62

ISO 10893-5:2011

Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections

63

ISO 10893-6:2019

Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

64

ISO 10893-7:2019

Non-destructive testing of steel tubes — Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

65

ISO 10893-8:2011

Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections

66

ISO 10893-9:2011

Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes

67

ISO 13470:2012

Trenchless applications of ductile iron pipes systems — Product design and installation

68

ISO 16132:2016

Ductile iron pipes and fittings — Seal coats for cement mortar linings

69

ISO 16134:2006

Earthquake- and subsidence-resistant design of ductile iron pipelines

70

ISO 18468:2017

Ductile iron fittings, accessories and their joints and valves — Epoxy coating

71

ISO/DIS 21051

Construction and installation of ductile iron pipeline system