KS M ISO 2176-2003

石油产品.润滑脂.滴点的测定

Petroleum products－Lubricating grease－Determination of dropping point

KS M ISO 21870-2007

橡胶配合剂炭黑加热高温损失的测定热重法

Rubber compounding ingredients－Carbon black－Determination   of high－temperature loss on heating by   thermogravimetry

KS M ISO 2190-2004

粒状软木.含水量的测定

Granulated cork－Determination of moisture content

KS M ISO 2197-2017

工业用碳酸氢钠.试验方法一览表和试样的制备

Sodium hydrogen carbonate for industrial   use — List of methods of   test and preparation of the test sample

KS M ISO 2199-2017

工业用碳酸氢钠.碳酸氢钠含量的测定.滴定法

Sodium hydrogen carbonate for industrial   use — Determination of   sodium hydrogen carbonate content — Titrimetric   method

KS M ISO 2207-2003

石蜡.冰凝点的测定

Petroleum waxes－Determination of congealing point

KS M ISO 2209-2017

工业用液体卤代烃.取样

Liquid halogenated hydrocarbons for   industrial use —   Sampling

KS M ISO 2211-2003

液体化学品.哈森单位(铂-钴标度)色度测定

Liquid chemical products－Measurement of colour in Hazen   units(platinum-cobalt scale)

KS M ISO 2219-2014

热绝缘用的膨胀纯集成软木.特性、取样和包装

Thermal insulation products for buildings — Factory-made products of expanded   cork (ICB) — Specification

KS M ISO 22196-2014

塑料和其他无孔表面抗菌活性的测量

Measurement of antibacterial activity on   plastics and other non-porous surfaces

KS M ISO 2227-2017

工业用甲醛溶液.甲醛含量的测定

Formaldehyde solutions for industrial use — Determination of formaldehyde   content

KS M ISO 22288-2008

皮革物理力学试验用鞋面弯曲法测定抗弯曲性

Leather－Physical and mechanical tests－Determination   of flex resistance by the vamp flex method

KS M ISO 2230-2012

橡胶制品贮存指南

Rubber products－Guidelines for storage

KS M ISO 2231-2002

橡胶或塑料涂覆织物.状态调节和试验的标准环境

Rubber－or plastics－coated fabrics－Standard atmospheres for conditioning and testing

KS M ISO 22391-1-2010

冷热水塑料管道系统耐高温聚乙烯（PE-RT）第1部分：总则

Plastics piping systems for hot and cold   water installations－Polyethylene   of raised temperature resistance(PE-RT)－Part 1：General

KS M ISO 22391-2-2015

冷热水用塑料管道系统耐高温聚乙烯（PE-RT）第2部分：管道

Plastics piping systems for hot and cold   water installations —   Polyethylene of raised temperature resistance(PE-RT) — Part 2: Pipes

KS M ISO 22391-3-2010

冷热水用塑料管道系统耐高温聚乙烯（PE-RT）第3部分：管件

Plastics piping systems for hot and cold   water installationsㅡPolyethylene of raised temperature   resistance(PE-RT)－Part   3：Fittings

KS M ISO 22391-5-2010

冷热水塑料管道系统耐高温聚乙烯（PE-RT）第5部分：系统适用性

Plastics piping systems for hot and cold   water installations－Polyethylene   of raised temperature resistance(PE-RT)－Part 5：Fitness for purpose of the system

KS M ISO 22414-2016

纸.基本尺寸办公用纸.边质量的测量

Paper－Cut-size office paper－Measurement of edge   quality

KS M ISO 2251-2007

内衬抗静电橡胶鞋技术条件

Lined antistatic rubber footwear－Specification

KS M ISO 2252-2008

低温下使用的、有衬里橡胶鞋

Rubber footwear, lined industrial, for use   at low temperatures

KS M ISO 22649-2004

鞋靴.内垫和内底的试验方法.吸水率和减湿率

Footwear－Test methods for insoles and insocks－Water   absorption and desorption

KS M ISO 22650-2008

鞋类整鞋试验方法鞋跟附件

Footwear－Test methods for whole shoe－Heel   attachment

KS M ISO 22651-2008

鞋类.鞋内底试验方法.尺寸稳定性

Footwear－Test methods for insoles－Dimensional   stability

KS M ISO 22652-2008

鞋类内底、里衬和内垫试验方法耐汗性

Footwear－Test methods for insoles, lining and insocks－Perspiration resistance

KS M ISO 22653-2004

鞋靴.鞋衬和内垫的试验方法.静摩擦

Footwear－Test methods for lining and insocks－Static   friction

KS M ISO 22654-2008

鞋类.外底的试验方法.抗拉强度和伸长率

Footwear－Test methods for outsoles－Tensile strength   and elongation

KS M ISO 2267-2007

表面活性剂.洗涤某些效果的评定.未上油的棉对照布的制备和使用方法

Surface active agents - Evaluation of   certain effects of laundering - Methods of preparation and use of unsoiled   cotton control cloth

KS M ISO 2268-2007

表面活性剂（非离子）－聚乙二醇和非离子活性物（加合物）的测定－威布尔法

Surface active agents(non-ionic)－Determination of polyethylene glycols   and non-ionic active matter(adducts)－Weibull method

KS M ISO 2270-2008

非离子表面活性剂聚乙氧基化衍生物氧乙烯基的碘量法测定

Non-ionic surface active agents－Polyethoxylated derivatives－Iodometric determination of oxyethylene groups

KS M ISO 2271-2007

表面活性剂.洗涤剂.用人工或机械直接两相滴定法测定阴离子活性物

Surface active agents－Detergents－Determination   of anionic-active matter by manual or mechanical direct two-phase titration   procedure

KS M ISO 22715-2014

化妆品.包装和标签

Cosmetics — Packaging and labelling

KS M ISO 22716-2014

化妆品.良好生产规范（GMP）.良好生产规范指南

Cosmetics — Good Manufacturing Practices(GMP) — Guidelines on Good Manufacturing Practices

KS M ISO 22717-2017

化妆品微生物学铜绿假单胞菌检测

Cosmetics－Microbiology－Detection of   Pseudomonas aeruginosa

KS M ISO 22718-2017

化妆品微生物学金黄色葡萄球菌检测

Cosmetics－Microbiology－Detection of   Staphylococcus aureus

KS M ISO 2272-2007

表面活性剂肥皂游离甘油低含量的分子吸收光谱测定法

Surface active agents－Soaps－Determination   of low contents of free glycerol by molecular absorption spectrometry

KS M ISO 22754-2009

纸浆和纸有效残墨浓度（埃里克数）的红外反射测定法

Pulp and paper－Determination of the effective   residual ink concentration(ERIC number) by infrared reflectance measurement

KS M ISO 22762-1-2016

弹性抗震隔震器第1部分：试验方法

Elastomeric seismic ─ protection isolators ─ Part 1: Test method

KS M ISO 22762-2-2016

弹性抗震隔震器第2部分：桥梁应用规范

Elastomeric seismic ─ protection isolators ─ Part2: Applications for bridges - Specifications

KS M ISO 22762-3-2016

弹性抗震隔震器第3部分：建筑应用规范

Elastomeric seismic ─ protection isolators ─ Part 3：Applications for buildings ─ Specifications

KS M ISO 22768-2014

生橡胶.用差示扫描量热法（DSC）测定玻璃化转变温度

Rubber, raw — Determination of the glass transition temperature by   differential scanning calorimetry(DSC)

KS M ISO 22774-2005

鞋靴.鞋附件的试验方法:鞋带.耐磨性

Footwear－Test methods for accessories：shoe laces－Abrasion resistance

KS M ISO 22775-2005

鞋靴.鞋附件的试验方法:金属附件.耐腐蚀性

Footwear－Test methods for accessories：Metallic   accessories－Corrosion resistance

KS M ISO 22776-2005

鞋靴.鞋附件的试验方法:粘扣.反复闭合前后的剪切强度

Footwear－Test methods for accessories：Touch and   close fasteners－Shear strength before and after   repeated closing

KS M ISO 22777-2005

鞋靴.鞋附件的试验方法:粘扣.反复闭合前后的剥离强度

Footwear－Test methods for accessories：Touch and   close fasteners－Peel strength before and after   repeated closing

KS M ISO 2285-2014

硫化或热塑性橡胶.在定伸下张力变形的测定和在定张力负荷下张力变形及伸长的测定

Rubber, vulcanized or thermoplastic — Determination of tension set under   constant elongation, and of tension set, elongation and creep under constant   tensile load

KS M ISO 2286-1-2017

橡胶或塑料涂层织物.卷料特性的测定.第1部分：长度、宽度和净质量的测定方法

Rubber- or plastics-coated fabrics — Determination of roll   characteristics — Part 1: Methods for determination   of length, width and net mass

KS M ISO 2286-2-2017

橡胶或塑料涂层织物.卷料特性的测定.第2部分：单位面积总质量、单位面积涂层质量和单位面积基材质量的测定方法

Rubber- or plastics-coated fabrics — Determination of roll   characteristics — Part 2: Methods for determination   of total mass per unit area, mass per unit area of coating and mass per unit   area of substrate

KS M ISO 2286-3-2017

橡胶或塑料涂覆织物卷制性能的测定第3部分：厚度的测定方法

Rubber- or plastics-coated fabrics－Determination of roll characteristics－Part 3：Method for determination of   thickness

KS M ISO 22891-2014

纸.用漫反射测量法测定透射率

Paper — Determination of transmittance by diffuse reflectance mesurement

KS M ISO 2302-2009

异丁烯-异戊二烯橡胶（IIR）－评价方法

Isobutene-isoprene rubber(IIR)－Evaluation procedures

KS M ISO 2303-2012

异戊橡胶（IR）－非充油、溶液聚合型－评价程序

Isoprene rubber(IR)－Non-oil-extended,   solution-polymerized types－Evaluation procedure

KS M ISO 23202-2016

铝生产用氧化铝20微米孔径筛过颗粒的测定

Aluminium oxide used for the production of   aluminium－Determination of   particles passing a 20 micrometer aperture sieve

KS M ISO 2321-2009

KS M ISO 2321:2009标准

KS M ISO 2321:2009

KS M ISO 2322-2015

丁苯胶(SBR)乳液和溶液聚合型.评定方法

Styrene-butadiene rubber(SBR)－Emulsion-and solution-polymerized   types－Evaluation procedures

KS M ISO 23233-2017

硫化橡胶或热塑橡胶.用驱动垂直磨盘测定耐磨性

Rubber, vulcanized or thermoplastic — Determination of resistance to   abrasion using a driven, vertical abrasive disc

KS M ISO 23337-2017

硫化橡胶或热塑性橡胶.用改进的兰伯恩试验机测定耐磨性

Rubber, vulcanized or thermoplastic — Determination of abrasion resistance   using the improved Lambourn test machine

KS M ISO 23470-2008

土壤质量有效阳离子交换容量（CEC）和可交换阳离子的测定六氯化钾溶液法

Soil quality－Determination of effective cation exchange capacity   (CEC) and exchangeable cations using a hexamminecobalt trichloride solution

KS M ISO 23529-2017

橡胶.物理试验方法用试件的准备和调节用一般规程

Rubber — General procedures for preparing and conditioning test pieces for   physical test methods

KS M ISO 23559-2014

塑料.薄膜和薄板.热塑性薄膜试验指南

Plastics — Film and sheeting — Guidance   on the testing of thermoplastic films

KS M ISO 2366-2017

天然和人造冰晶石.钠含量的测定.火焰发射和原子吸收分光光度法

Cryolite, natural and   artificial-Determination of sodium contentFlame emission and atomic   absorption spectrophotometric methods

KS M ISO 23671-2010

轿车轮胎相对湿抓性能试验方法新装轮胎

Passenger car tyres－Method for measuring relative wet   grip performance－Loaded new tyres

KS M ISO 2367-2017

天然和人造冰晶石.铝含量的测定.8-羟基喹啉重量法

Cryolite(natural and artificial)－Determination of aluminium content－8－hydroxyquinoline gravimetric method

KS M ISO 23711-2007

弹性密封件排水用管接头密封件材料要求热塑性弹性体

Elastomeric seals－Requirements for materials for pipe   joint seals used in water and drainage applications－Thermoplastic   elastomers

KS M ISO 23713-2016

纸浆.用自动光学分析测定纤维粗度.偏振光法

Pulps－Determination of fibre coarseness by automated optical analysis－Polarized light method

KS M ISO 23714-2014

纸浆.保水阀（WRV）的测定

Pulps — Determination of water retention valve(WRV)

KS M ISO 23794-2017

硫化橡胶或热固性橡胶.磨损试验.指南

Rubber, vulcanized or thermoplastic－Abrasion testing－Guidance

KS M ISO 2385-2004

软木厚板、原软木、碎料、软木塞、软木废物和软木残渣.水分含量测定取样

Corkwood in planks, virgin cork, cleanings,   cork pieces, corkwood refuse and corkwaste－Sampling to determine moisture content

KS M ISO 2386-2004

软木厚板、软木料、软木栓皮、碎栓皮、软木废物和软木残渣.含水量的测定

Corkwood in planks, virgin cork, ramassage,   gleanings, corkwood refuse and corkwaste－Determination of moisture content

KS M ISO 2393-2017

橡胶混炼试验.制备、混炼和硫化.设备和方法

Rubber test mixes－Preparation, mixing and vulcanization－Equipment and procedures

KS M ISO 2398-2017

织物增强的压缩空气用橡胶软管.规范

Rubber hose, textile-reinforced, for   compressed air－Specification

KS M ISO 2409-2013

色漆和清漆.划格试验

Paints and varnishes — Cross­-cut test

KS M ISO 2411-2009

橡胶或塑料涂覆织物涂层粘合力的测定

Rubber- or plastics-coated fabrics－Determination of coating adhesion

KS M ISO 2417-2004

皮革.物理和机械试验.静态吸水性的测定

Leather－Physical and mechanical tests－Determination   of the static absorption of water

KS M ISO 2418-2004

皮革.化学、物理、机械和色牢度试验.抽样位置

Leather－Chemical , physical and mechanical and fastness tests－Sampling location

KS M ISO 2419-2013

皮革.物理和机械试验.试样制备和状态调节

Leather ㅡ   Physical and mechanical tests ㅡ   Sample preparation and conditioning

KS M ISO 2420-2004

皮革.物理和机械试验.表观密度的测定

Leather－Physical and mechanical tests－Determination   of apparent density

KS M ISO 24254-2010

润滑油、工业用油及有关产品（L类）－－E组（内燃机油）－－四冲程摩托车汽油发动机及有关传动系统用油规范（EMA和EMB类）

Lubricants, industrial oils and related   products(class L)－Family   E(internal combustion engine oils)－Specifications for   oils for use in four-stroke cycle motorcycle gasoline engines and associated   drivetrains(categories EMA and EMB)

KS M ISO 2431-2012

色漆和清漆用吸盘测定流动时间

Paints and varnishes－Determination of flow time by use of   flow cups

KS M ISO 2439-2012

软质泡沫聚合材料.硬度的测定(压痕法)

Flexible cellular polymeric materials－ Determination of   hardness(indentation technique)

KS M ISO 2440-2017

软质和硬质泡沫聚合材料.加速老化试验

Flexible and rigid cellular polymeric   materials－Accelerated ageing   tests

KS M ISO 24442-2014

化妆品.防晒试验方法.紫外线防护的体内测定

Cosmetics — Sun protection test methods —   In vivo determination of UVA protection

KS M ISO 24443-2014

化妆品.防晒试验方法.紫外线防护的体外测定

Cosmetics — Sun protection test methods —   In vitro determination of UVA protection

KS M ISO 24453-2015

橡胶－可比单点数据的采集和表示

Rubber－Acquisition and presentation of comparable single-point data

KS M ISO 24454-2015

橡胶－可比多点数据的采集和表示

Rubber－Acquisition and presentation of comparable multi-point data

KS M ISO 2453-2014

乳聚型丁苯生胶.结合苯乙烯含量测定.折光指数法

Rubber, raw styrene-butadiene,   emulsion-polymerized —   Determination of bound styrene content — Refractive   index method

KS M ISO 2454-2010

橡胶制品锌含量的测定EDTA滴定法

Rubber products－Determination of zinc content－EDTA titrimetric method

KS M ISO 2456-2003

表面活性剂.用作试验溶剂的水.规范和试验方法

Surface active agents－Water used as a solvent for tests－Specification and test methods

KS M ISO 2460-2017

工业用碳酸氢钠.铁含量的测定.1,10-菲罗啉光度法

Sodium hydrogen carbonate for industrial   use — Determination of iron   content — 1,10-phenanthroline photometric method

KS M ISO 2462-2015

工业氯酸钠水分的测定重量法

Sodium chlorate for industrial use－Determination of moisture content－Gravimetric method

KS M ISO 2463-2015

工业氯酸钠氯化物含量的测定汞量法

Sodium chlorate for industrial use－Determination of chloride content－Mercurimetric method

KS M ISO 2466-2017

工业用氢氧化钾.取样.试样.供某些测定用的主溶液的配制

Potassium hydroxide for industrial use — Sampling —   Test sample — Preparation of the main solution for   carrying out certain determinations

KS M ISO 2469-2016

纸、纸板和纸浆辐射因数的测定

Paper, board and pulps－Measurement of radiance factor

KS M ISO 24698-1-2010

生橡胶丙烯腈-丁二烯橡胶（NBR）中结合丙烯腈含量的测定第1部分：燃烧法

Rubber, raw－Determination of bound acrylonitrile content in   acrylonitrile-butadiene rubber(NBR)－Part 1：Combustion(Dumas) method

KS M ISO 24698-2-2010

生橡胶丙烯腈-丁二烯橡胶（NBR）中结合丙烯腈含量的测定第2部分：凯氏定氮法

Rubber, raw－Determination of bound acrylonitrile content in   acrylonitrile-butadiene rubber(NBR)－Part 2：Kjeldahl method

KS M ISO 2470-1-2016

纸、纸板和纸浆蓝光漫反射系数的测定第1部分：室内日光条件（ISO亮度）

Paper, board and pulps－Measurement of diffuse blue   reflectance factor－Part 1：Indoor   daylight conditions(ISO brightness)

KS M ISO 2470-2-2009

纸、纸板和纸浆蓝光漫反射系数的测定第2部分：室外日光条件（D65亮度）

Paper, board and pulps－Measurement of diffuse blue   reflectance factor－Part 2：Outdoor   daylight conditions(D65 brightness)

KS M ISO 2471-2009

纸和纸板不透明度（纸背）的测定漫反射法

Paper and board－Determination of opacity(paper   backing)－Diffuse reflectance method

KS M ISO 247-2007

橡胶灰份的测定

Rubber－Determination of ash

KS M ISO 2475-2015

氯丁橡胶(CR).通用型.评价规程

Chloroprene rubber(CR)－General-purpose types－Evaluation procedure

KS M ISO 2476-2015

顺丁橡胶(BR).溶液聚合型.评定方法

Butadiene rubber(BR)－Solution-polymerized types－Evaluation procedures

KS M ISO 2479-2017

工业用氯化钠.不溶于水或不溶于酸的物质含量的测定和供其他测定用的主溶液的配制

Sodium chloride for industrial use — Determination of matter insoluble in   water or in acid and preparation of principal solutions for other   determinations

KS M ISO 2480-2017

工业氯化钠硫酸盐含量的测定硫酸钡重量法

Sodium chloride for industrial use — Determination of sulphate content — Barium sulphate gravimetric method

KS M ISO 248-1

生橡胶.挥发物含量的测定.第1部分：热磨法和烘箱法

Rubber, raw — Determination of volatile-matter content — Part 1: Hot-mill method and oven method

KS M ISO 2481-2017

工业用氯化钠.以氯表示的卤素的测定.汞量法

Sodium chloride for industrial use — Determination of halogens, expressed   as chlorine — Mercurimetric method

KS M ISO 248-2

生橡胶.挥发性物质含量的测定.第2部分：用带红外线干燥装置的自动分析仪的热重分析法

Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser   with an infrared drying unit

KS M ISO 2482-2017

工业用氯化钠.钙和镁含量的测定.乙二胺四乙酸(EDTA)络合滴定法

Sodium chloride for industrial use — Determination of calcium and   magnesium contents — EDTA complexometric methods

KS M ISO 2483-2017

工业用氯化钠.在110℃时质量损失的测定

Sodium chloride for industrial use — Determination of the loss of mass at   110 degrees C

KS M ISO 249-2017

天然生胶污垢含量的测定

Rubber, raw natural－Determination of dirt content

KS M ISO 2493-1-2016

纸和纸板.抗弯性的测定.第1部分：恒定偏转率

Paper and board — Determination of bending resistance — Part 1: Constant rate of deflection

KS M ISO 2493-2-2017

纸和纸板.抗弯性的测定.第2部分：泰伯型试验机

Paper and board - Determination of bending   resistence-Part2:Taber-type tester

KS M ISO 2495-2013

铁蓝颜料.规范和试验方法

Iron blue pigments — Specifications and methods of test

KS M ISO 24999-2010

软质泡沫聚合材料恒应变疲劳试验方法

Flexible cellular polymeric materials－Determination of fatigue by a   constant-strain procedure

KS M ISO 2505-2014

热塑性塑料管.纵向回缩.试验方法和参数

Thermoplastics pipes — Longitudinal reversion — Test method and parameters

KS M ISO 2507-1-2005

热塑性塑料管材和管件维卡软化温度第1部分：通用试验方法

Thermoplastics pipes and fittings－Vicat softening temperature－ Part 1：General test method

KS M ISO 2507-2-2005

热塑性塑料管材和管件维卡软化温度第2部分：高抗冲击性聚氯乙烯（PVC－HI）管材用未增塑聚氯乙烯（PVC－U）或氯化聚氯乙烯（PVC－C）管材和管件的试验条件

Thermoplastics pipes and fittings－Vicat softening temperature - Part 2：Test conditions for unplasticized poly(vinyl chloride)(PVC－U) or chlorinated poly(vinyl chloride)(PVC－C) pipes and fittings for high impact resistance poly(vinyl   chloride)(PVC－HI) pipes

KS M ISO 2509-2004

砖瓦用吸音膨胀纯集成软木

Sound-absorbing expanded pure agglomerated   cork in tiles

KS M ISO 251-2007

带纺织物绕线架的输送带.宽度和长度

Conveyor belts with textile carcass－Widths and lengths

KS M ISO 25179-2014

粘合剂.水溶性或碱溶性压敏粘合剂溶解度的测定

Adhesives — Determination of the solubility of water-soluble or   alkali-soluble pressure-sensitive adhesives

KS M ISO 2528-2016

薄页材料.水蒸气透湿度的测定.重量法

Sheet materials－Determination of water vapour   transmission rate－Gravimetric(dish) method

KS M ISO 2535-2010

塑料.不饱和聚酯树脂室温时胶凝时间的测量

Plastics－Unsaturated-polyester resins－Measurement   of gel time at ambient temperature

KS M ISO 25477-2009

纸、纸板和纸浆图像分析测量的基本指南

Paper, board and pulps－Basic guidelines for image analysis   measurements

KS M ISO 25518-2012

通用一次性橡胶手套规范

Single-use rubber gloves for general   applications－Specification

KS M ISO 2554-2010

塑料.不饱和聚酯树脂.羟基值的测定

Plastics－Unsaturated polyester resins－Determination   of hydroxyl value

KS M ISO 2555-2002

塑料液态或乳状或分散状树脂表观粘度的测定Brookfield试验方法

Plastics－Resins in the liquid state or as emulsions or dispersions －Determination of apparent viscosity by the Brookfield test method

KS M ISO 2556-2006

塑料.在大气压力下薄膜和薄板的透气率的测定.测压法

Plastics－Determination of the gas transmission rate of films and thin   sheets under atmospheric pressure－Manometric method

KS M ISO 2561-2013

塑料.用气相色谱法测定聚苯乙烯(PS)和抗冲击聚苯乙烯(PS-I)中剩余的苯乙烯单体

Plastics — Determination of residual styrene monomer in   polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography

KS M ISO 257-2003

农药及其他农用化学品.通用名称选择原则

Pesticides and other agrochemicals－Principles for the selection of   common names

KS M ISO 2578-2007

塑料长期受热后时间和温度极限的测定

Plastics－Determination of time－temperature limits   after prolonged exposure to heat

KS M ISO 2580-2-2016

塑料丙烯腈/丁二烯/苯乙烯（ABS）模塑和挤塑材料第2部分：试样制备和性能测定

Plastics－Acrylonitirle/butadiene/styrene(ABS) moulding and extrusion   materials－Part 2：Preparation   of test specimens and determination of properties

KS M ISO 2588-2017

皮革.取样.总样品的项目数

Leather — Sampling — Number of items for a gross   sample

KS M ISO 2589-2004

皮革.物理和机械试验.厚度的测定

Leather－Physical and mechanical tests－Determination   of thickness

KS M ISO 2590-2004

测定砷的一般方法.二乙基二硫代氨基甲酸银光度法

General method for the determination of   arsenic－Silver   diethyldithiocarbamate photometric method

KS M ISO 2592-2007

闪点和燃点的测定.克利夫兰开口杯法

Determination of flash and fire points－Cleveland open cup method

KS M ISO 26082-1-2013

皮革_物理力学试验方法沾污_第1部分：摩擦（马丁代尔）法

Leather ㅡ   Physical and mechanical tests methods for the determination of soiling ㅡ Part 1: Rubbing(Martindale) method

KS M ISO 26082-2-2013

皮革_物理力学试验方法沾污_第2部分：滚筒法

Leather ㅡ   Physical and mechanical tests methods for the determination of soiling ㅡ Part 2: Tumbling method

KS M ISO 265-1

塑料管材和管件生活和工业污水管管件基本尺寸公制系列第1部分：未增塑聚氯乙烯（PVC-U）

Pipes and fittings of plastics materials－Fittings for domestic and industrial   waste pipes－Basic dimensions：Metric   series－ Part 1：Unplasticized   poly(vinyl chloride) (PVC-U)

KS M ISO 26842-1-2014

胶粘剂.室内木制品用胶粘剂的评定和选择的试验方法.第1部分：在非严酷环境中的抗分层性

Adhesives — Test methods for the evaluation and selection of   adhesives for indoor wood products — Part 1:   Resistance to delaminaion in non-severe environments

KS M ISO 26842-2-2014

胶粘剂.室内木制品用胶粘剂的评定和选择的试验方法.第2部分：在恶劣环境下的抗分层性

Adhesives — Test methods for the evaluation and selection of   adhesives for indoor wood products — Part 2:   Resistance to delamination in severe environments

KS M ISO 2718-2004

气相色谱化学分析法标准编制

Standard layout for a method of chemical   analysis by gas chromatography

KS M ISO 2719-2017

闪点的测定.宾斯克-马丁闭口杯法(Pensky-Martens)

Determination of flash point — Pensky-Martens closed cup method

KS M ISO 2758-2016

纸.耐破强度的测定

Paper－Determination of bursting strength

KS M ISO 27588-2015

硫化橡胶或热塑性橡胶恒载硬度的测定极低橡胶硬度标度法

Rubber, vulcanized or thermoplastic－Determination of dead-load hardness   using the very low rubber hardness(VLRH) scale

KS M ISO 2759-2016

板纸.耐破强度的测定

Board－Determination of bursting strength

KS M ISO 276-2012

色漆和清漆用粘合剂亚麻子油要求和试验方法

Binders for paints and varnishes－Linseed stand oil－Requirements and methods of test

KS M ISO 2762-2017

工业用盐酸.可溶性硫酸盐的测定.比浊法

Hydrochloric acid for industrial use — Determination of soluble sulphates — Turbidimetric method

KS M ISO 277-2012

色漆和清漆用粘合剂原桐油要求和试验方法

Binders for paints and varnishes－Raw tung oil－   Requirements and methods of test

KS M ISO 27727-2009

硫化橡胶疲劳裂纹扩展速率的测定

Rubber, vulcanized－Measurement of fatigue crack growth   rate

KS M ISO 2781-2015

硫化橡胶或热塑性橡胶小火焰密度的测定

Rubber, vulcanized or thermoplastic－Determination of density to a small   flame

KS M ISO 2782-1-2014

硫化橡胶或热塑性橡胶透气性的测定第1部分：压差法

Rubber, vulcanized or thermoplastic — Determination of permeability to   gases — Part 1: Differential-pressure methods

KS M ISO 2782-2-2014

硫化橡胶或热塑性橡胶透气性的测定第2部分：等压法

Rubber, vulcanized or thermoplastic — Determination of permeability to   gases — Part 2: Equal-pressure method

KS M ISO 2796-2010

硬质泡沫塑料.尺寸稳定性试验

Cellular plastics, rigid－Test for dimensional stability

KS M ISO 28017-2017

疏浚用钢丝或织物增强的橡胶软管和软管组件规范

Rubber hoses and hose assemblies, wire or   textile reinforced, for dredging applications — Specification

KS M ISO 2808-2017

色漆和清漆漆膜厚度的测定

Paints and varnishes－Determination of film thickness

KS M ISO 2810-2011

色漆和清漆涂层的自然风化暴露和评定

Paints and varnishes－Natural weathering of coatings－Exposure and assessment

KS M ISO 2811-1-2017

色漆和清漆密度的测定第1部分：比重瓶法

Paints and varnishes－Determination of density－ Part 1：Pyknometer method

KS M ISO 2811-2-2012

色漆和清漆密度的测定第2部分：潜体法

Paints and varnishes－Determination of density－ Part 2：Immersed body(plummet) method

KS M ISO 2811-3-2012

色漆和清漆密度的测定第3部分：振荡法

Paints and varnishes－Determination of density－ Part 3：Oscillation method

KS M ISO 2811-4-2012

色漆和清漆密度的测定第4部分：压力杯法

Paints and varnishes－Determination of density－ Part 4：Pressure cup method

KS M ISO 2812-1-2012

色漆和清漆耐液体性的测定第1部分：浸水以外的液体

Paints and varnishes－Determination of resistance to   liquids－ Part 1：Immersion in   liquids other than water

KS M ISO 2812-2-2017

色漆和清漆耐液体性的测定第2部分：浸水法

Paints and varnishes－Determination of resistance to   liquids－ Part 2：Water   immersion method

KS M ISO 2812-3-2013

色漆和清漆耐液体性的测定第3部分：吸收剂法

Paints and varnishes ㅡ Determination of resistance to liquids ㅡ Part 3: Method using an absorbent medium

KS M ISO 2812-4-2012

色漆和清漆耐液体性的测定第4部分：点滴法

Paints and varnishes－Determination of resistance to   liquids－Part 4：Spotting   methods

KS M ISO 2812-5-2012

色漆和清漆耐液体性的测定第5部分：温度梯度烘箱法

Paints and varnishes－Determination of resistance to   liquids－Part 5：Temperature-gradient   oven method

KS M ISO 2813-2015

色漆和清漆非金属漆膜20°、60°和85°镜面光泽度的测定

Paints and varnishes－Determination of specular gloss of   non-metallic paint films at 20°, 60° and 85°

KS M ISO 2814-2002

色漆和清漆.类型和颜色相同的色漆对比率(遮盖力)的比较

Paints and varnishes－Comparison of contrast ratio(hiding   power) of paints of the same type and colour

KS M ISO 2815-2011

色漆和清漆.布考耳兹(Buchholz)压痕试验

Paints and varnishes－Buchholz indentation test

KS M ISO 28199-1-2012

色漆和清漆应用过程中涂层系统性能的评定第1部分：相关词汇和试板的制备

Paints and varnishes－Evaluation of properties of coating   systems related to the application process－Part 1：Relevant vocabulary and preparation of test panels

KS M ISO 28199-2-2012

色漆和清漆与应用工艺有关的涂层体系性能的评定第2部分：颜色稳定性、工艺遮盖力、再溶解、过度喷涂吸收、润湿、表面结构和斑点

Paints and varnishes－Evaluation of properties of coating   systems related to the application process－Part 2：Colour stability, process hiding power, re-dissolving,overspray   absorption, wetting, surface texture and mottling

KS M ISO 28199-3-2012

色漆和清漆应用过程中涂层系统性能的评定第3部分：流挂、气泡形成、针孔和遮盖力的目视评定

Paints and varnishes－Evaluation of properties of coating   systems related to the application process－Part 3：Visual assessment of sagging, formation of bubbles, pinholing and   hiding power

KS M ISO 2820-2002

皮革.牛、马原料皮.修边方法

Leather－Raw hides of cattle and horses－Method of   trim

KS M ISO 2821-2002

皮革.牛、马原料皮.堆置盐腌防腐

Leather－Raw hides of cattle and horses－Preservation   by stack salting

KS M ISO 282-2002

输送带.取样

Conveyor belts－Sampling

KS M ISO 2822-1-2002

牛、小牛原料皮.第1部分:缺陷的描述

Raw cattle hides and calf skins－Part 1：Description   of defects

KS M ISO 2828-2003

铝生产用氧化铝氟含量的测定茜素配位酮氯化镧分光光度法

Aluminium oxide primarily used for the   production of aluminium－Determination   of fluorine content－Alizarin complexone and lanthanum   chloride spectrophotometric method

KS M ISO 2831-2017

工业用氟化钠.水不溶物含量的测定

Sodium fluoride for industrial use — Determination of water-insoluble   matter

KS M ISO 283-2009

织物输送带全厚度拉伸强度、断裂伸长和基准载荷伸长试验方法

Textile conveyor belts－Full thickness tensile strength,   elongation at break and elongation at the reference load－Test method

KS M ISO 2832-2017

工业用氟化钠.水含量的测定

Sodium fluoride for industrial use — Determination of moisture content

KS M ISO 2833-2017

工业用氟化钠.氟含量的测定.威拉德-温特尔改进法

Sodium fluoride for industrial use — Determination of fluorine

KS M ISO 28580-2016

轿车、卡车和公共汽车轮胎滚动阻力测量方法单点试验和测量结果的相关性

Passenger car, truck and bus tyres－Methods of measuring rolling   resistance－Single point test and correlation of   measurement results

KS M ISO 28641-2012

橡胶配合剂有机化学品通用试验方法

Rubber compounding ingredients－Organic chemicals－ General test methods

KS M ISO 2865-2003

主要用于铝生产的氧化铝.硼含量的测定.姜黄素分光光度法

Aluminium oxide primarily used for the   production of aluminium－Determination   of boron content－Curcumin spectrophotometric method

KS M ISO 2868-2007

表面活性剂.洗涤剂.对酸解稳定的阴离子活性物.痕量的测定

Surface active agents－Detergents－Anionic-active   matter stable to acid hydrolysis－Determination of   trace amounts

KS M ISO 2869-2007

表面活性剂－洗涤剂－碱性条件下可水解的阴离子活性物－可水解和不可水解阴离子活性物的测定

Surface active agents－Detergents－Anionic-active   matter hydrolyzable under alkaline conditions－Determination   of hydrolyzable and non-hydrolyzable anionic-active matter

KS M ISO 2870-2014

表面活性剂.洗涤剂.酸性条件下可水解的和不可水解的阴离子活性物的测定

Surface active agents — Detergents —   Determination of anionic-active matter hydrolysable and non-hydrolysable   under acid conditions

KS M ISO 28702-2009

橡胶和塑料软管及管材织物增强型次室温挤压试验

Rubber and plastics hoses and tubing－Textile-reinforced types－Sub-ambient temperature crush test

KS M ISO 2871-2-2007

表面活性剂洗涤剂阳离子活性物含量的测定低分子量阳离子活性物（200～500）

Surface active agents－Detergents－Determination   of cationic-active matter content－Cationic-active   matter of low molecular mass(between 200 and 500)

KS M ISO 2871-2007

表面活性剂洗涤剂阳离子活性物含量的测定高分子量阳离子活性物

Surface active agents－Detergents－Determination   of cationic-active matter content－High-molecular-mass   cationic-active matter

KS M ISO 287-2009

纸和纸板批量含水率的测定烘箱干燥法

Paper and board－Determination of moisture content of   a lot－Oven-drying method

KS M ISO 2878-2012

硫化橡胶或热塑性橡胶抗静电和导电制品电阻的测定

Rubber, vulcanized or thermoplastic－Antistatic and conductive products－Determination of electrical resistance

KS M ISO 2884-1-2007

色漆和清漆用旋转粘度计测定粘度第1部分：高速剪切锥板粘度计

Paints and varnishes－Determination of viscosity using   rotary viscometers－Part 1：Cone-and-plate   viscometer operated at a high rate of shear

KS M ISO 2884-2-2011

色漆和清漆用旋转粘度计测定粘度第2部分：以规定速度工作的圆盘或球粘度计

Paints and varnishes－Determination of viscosity using   rotary viscometers－Part 2：Disc   or ball viscometer operated at a specified speed

KS M ISO 289-1

非硫化橡胶剪切圆盘粘度计测定第1部分：门尼粘度的测定

Rubber unvulcanized－Determinations using a shearing-disc   viscometer－Part 1：Determination   of Mooney viscosity

KS M ISO 289-2

未硫化橡胶－用剪切圆盘粘度计测定－第2部分：预硫化特性的测定

Rubber, unvulcanized－Determinations using a shearing-disc   viscometer－Part 2：Determination   of pre-vulcanization characteristics

KS M ISO 289-3

未硫化橡胶－用剪切圆盘粘度计测定－第3部分：无色素、充油、乳液聚合丁苯橡胶的δ－门尼值的测定

Rubber, unvulcanized－Determinations using a shearing-disc   viscometer－Part 3：Determination   of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polymerized   SBR

KS M ISO 289-4

未硫化橡胶用剪切圆盘粘度计测定第4部分：门尼应力松弛率的测定

Rubber, unvulcanized－Determinations using a shearing-disc   viscometer－Part 4：Determination   of the Mooney stress-relaxation rate

KS M ISO 2896-2010

硬质泡沫塑料.吸水性的测定

Rigid cellular plastics－Determination of water absorption

KS M ISO 2897-2-2016

塑料耐冲击聚苯乙烯（PS-I）模塑和挤塑材料第2部分：试样制备和性能测定

Plastics－Impact-resistant polystyrene(PS-I)moulding and extrusion materials－Part 2：Preparation of test specimens and   determiniation of properties

KS M ISO 2898-1-2002

塑料增塑聚氯乙烯（PVC－P）模塑和挤塑材料第1部分：命名系统和基本规范

Plastics－Plasticized poly(vinyl chloride) (PVC－P)   moulding and extrusion materials－Part 1：Designation system and basis for specifications

KS M ISO 2898-2-2012

塑料增塑聚氯乙烯（PVC-P）模塑和挤塑材料第2部分：试样制备和性能测定

Plastics－Plasticized poly(vinyl chloride)(PVC-P) moulding and extrusion   materials－Part 2：Preparation   of test specimens and determination of properties

KS M ISO 2909-2016

石油产品.用运动粘度计算粘度指数

Petroleum products — Calculation of viscosity index from   kinematic viscosity

KS M ISO 291-2012

塑料.调节和试验用标准大气

Plastics－Standard atmospheres for conditioning and testing

KS M ISO 2921-2014

硫化橡胶.低温特性测定.温度-回缩法(TR试验)

Rubber, vulcanized — Determination of low-temperature   retraction (TR test)

KS M ISO 2926-2010

主要用于生产45μm至150μm范围内铝粒度分析的氧化铝.电铸筛法

Aluminium oxide primarily used for the   production of aluminium-Particle size analysis for the range 45μm to 150μm -   Method using electroformed sieves

KS M ISO 2928-2008

25巴（2.5兆帕）以下液化石油气（LPG）和天然气用橡胶软管及软管组合件规范

Rubber hoses and hose assemblies for liquefied   petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25   bar(2.5 MPa)－Specification

KS M ISO 2929-2008

油槽车排吸油用橡胶软管和软管组件.规范

Rubber hoses and hose assemblies for bulk   fuel delivery by truck－Specification

KS M ISO 2930-2012

天然生胶.塑性保持指数(PRI)的测定

Rubber, raw natural－Determination of plasticity retention   index(PRI)

KS M ISO 2951-2014

硫化橡胶.绝缘电阻率的测定

Rubber, vulcanized or thermoplastic — Determination of insulation   resistance

KS M ISO 295-2010

塑料.热固性材料试样的压模塑法

Plastics－Compression moulding of test specimens of thermosetting materials

KS M ISO 29601-2013

涂料和清漆.防护漆系统的腐蚀防护.干膜多孔性的评定

Paints and varnishes — Corrosion protection by protective   paint systems — Assessment of porosity in a dry film

KS M ISO 29802-2016

全地形（AT）轮胎和轮辋5度锥形轮辋上有符号标记的充气轮胎名称、尺寸、标记和额定载荷

All terrain(AT) tyres and rims－Symbol marked pneumatic tyres on 5   degrees tapered rims－Designation, dimension, marking   and load ratings

KS M ISO 29862-2014

自粘带剥离粘合性能的测定

Self adhesive tapes — Determination of peel adhesion   properties

KS M ISO 29863-2014

自粘带.静态剪切粘合力的测量

Self adhesive tapes — Measurement of static shear adhesion

KS M ISO 29864-2014

自粘带.断裂强度和断裂伸长的测量

Self adhesive tapes — Measurement of breaking strength and   elongation at break

KS M ISO 2992-2017

工业用硫酸铵.铁含量的测定.2,2'-联吡啶光度法

Ammonium sulphate for industrial use — Determination of iron content — 2,2'-bipyridyl photometric method

KS M ISO 2993-2017

工业用硫酸铵.游离酸度的测定.滴定法

Ammonium sulphate for industrial use — Determination of free acidity — Titrimetric method

KS M ISO 29945-2017

冷冻非石油基液化气体燃料.二甲醚（DME）.陆上终端人工取样方法

Refrigerated non-petroleum-based liquefied   gaseous fuels — Dimethylether(DME) -   Method of manual sampling onshore terminals

KS M ISO 2997-2017

工业用磷酸.硫酸盐含量测定.还原和滴定法

Phosphoric acid for industrial use－Determination of sulphate content－Method by reduction and titrimetry

KS M ISO 3001-2002

塑料.环氧化合物.环氧基当量的测定

Plastics－Epoxy compounds－Determination of epoxy

KS M ISO 30013-2014

橡胶和塑料软管.暴露于实验室光源的方法.颜色、外观和其他物理特性变化的测定

Rubber and plastics hoses — Methods of exposure to laboratory   light sources — Determination of changes in colour,   appearance and other physical properties

KS M ISO 3007-2012

石油产品和原油蒸气压测定法（雷德法）

Petroleum products and crude petroleum－Determination of vapour pressure－Reid method

KS M ISO 3011-2012

橡胶或塑料涂覆织物在静态条件下耐臭氧龟裂的测定

Rubber- or plastics-coated fabrics－Determination of resistance to ozone   cracking under static conditions

KS M ISO 3012-2003

石油产品.轻质和中间馏份燃料硫醇硫的测定.电位滴定法

Gasoline, kerosine and distillate fuels－Determination of mercaptan sulfur－Potentiometric method

KS M ISO 3013-2004

石油产品.航空燃料冰点的测定

Petroleum products－Determination of the freezing point   of aviation fuels

KS M ISO 3014-2012

石油产品煤油烟点测定法

Petroleum products－Determination of the smoke point of   kerosine

KS M ISO 3015-2008

石油产品.浊点的测定

Petroleum products－Determination of cloud point

KS M ISO 3016-2016

石油产品.倾点的测定

Petroleum products — Determination of pour point

KS M ISO 302-2014

纸浆.卡伯值的测定

Pulps — Determination of Kappa number

KS M ISO 3034-2017

瓦楞纤维板单板厚度的测定

Corrugated fibreboard — Determination of single sheet   thickness

KS M ISO 3035-2014

瓦楞纤维板平压强度的测定

Corrugated fiberboard — Determination of flat crush   resistance

KS M ISO 3036-2016

纸板.戳穿强度的测定

Board－Determination of puncture resistance

KS M ISO 3037-2016

瓦楞纸板边压强度的测定（无蜡边法）

Corrugated fiberboard－Determination of edgewise crush   resistance(unwaxed edge method)

KS M ISO 3038-2017

瓦楞纤维板浸水法测定胶接耐水性

Corrugated fiberboard－Determination of the water resistance   of the glue bond by Immersion

KS M ISO 3039-2017

瓦楞纤维板分离后成份纸克数的测定

Corrugated fibreboard — Determination of grammage of the   component papers after separation

KS M ISO 304-2003

表面活性剂.用拉起液膜法测定表面张力

Surface active agents－Determination of surface tension by   drawing up liquid films

KS M ISO 306-2015

塑料.热塑性材料.维卡特(VICAT)软化温度的测定

Plastics－Thermoplastic materials－Determination of   Vicat softening temperature(VST)

KS M ISO 308-2010

塑料.酚醛模塑材料.丙酮可溶性物质(在未模塑状态时表现树脂含量)的测定

Plastics－Phenolic moulding materials－Determination   of acetone-soluble matter(apparent resin content of material in the unmoulded   state)

KS M ISO 3104-2008

石油产品透明和不透明液体测定法

Petroleum products－Transparent and opaque liquids－Determination

KS M ISO 3105-2003

玻璃毛细管运动粘度计.规格和操作说明

Glass capillary kinematic viscometers－Specifications and operating   instructions

KS M ISO 3114-2003

硬聚氯乙烯(PVC)饮用水管.铅和锡的可萃取性.试验方法

Unplasticized polyvinyl chloride(PVC－U) pipes for potable water supply－Extractability of lead and tin－Test method

KS M ISO 3126-2016

塑料管道系统.塑料部件.尺寸测定

Plastics piping system－Plastics piping components－Measurement and determination of dimensions

KS M ISO 3127-2005

热塑性塑料管.耐外冲击性的测定.时针旋转法

Thermoplastics pipes－Determination of resistance to   external blows－Round-the-clock method

KS M ISO 3136-2009

橡胶胶乳.丁苯胶乳.结合苯乙烯含量的测定

Rubber latex－Styrene-butadiene－Determination   of bound styrene content

KS M ISO 3137-2002

工业用无水氟化氢.取样

Anhydrous hydrogen fluoride for industrial   use－Sampling

KS M ISO 3139-2016

工业用含水氢氟酸取样和试验方法

Aqueous hydrofluoric acid for industrial   use－Sampling and methods   of test

KS M ISO 3146-2012

塑料.用毛细管和偏振显微镜测定半晶状聚合物的熔化性能(熔化温度或熔化区域)

Plastics－Determination of melting behaviour(melting temperature or melting   range) of semi-crystalline polymers by capillary tube and   polarizing-microscope methods

KS M ISO 3165-2016

工业用化学品取样.取样的安全性

Sampling of chemical products for   industrial use－Safety in sampling

KS M ISO 3167-2012

塑料多用途试样

Plastics－Multipurpose test specimens

KS M ISO 3171-2003

石油液体.自动管线采样

Petroleum liquid－Automatic pipeline sampling

KS M ISO 3196-2017

工业用氢氧化钠.碳酸盐含量的测定.滴定法

Sodium hydroxide for industrial use — Determination of carbonates content — Titrimetric method

KS M ISO 3199-2015

工业氯酸钠氯酸盐含量的测定重铬酸盐滴定法

Sodium chlorate for industrial use－Determination of chlorate   content-Dichromate titrimetric method

KS M ISO 3219-2003

塑料.液态或乳态或分散状的聚合物/树脂.使用规定剪切率的旋转式粘度计测定粘度

Plastics－Polymers/resins in the liquid state or as emulsions or dispersions－Determination of viscosity using a rotational viscometer with   defined shear rate

KS M ISO 3233-1-2016

色漆和清漆不挥发物体积百分比的测定第1部分：用涂层试验板测定不挥发物和用阿基米德原理测定干膜密度的方法

Paints and varnishes ㅡ Determination of the percentage volume of non-volatile   matter ㅡ Part 1: Method using a coated test panel   to determine non-volatile matter and to determine dry film density by the Archimedes   principle

KS M ISO 3233-2-2016

色漆和清漆非挥发物体积百分比的测定第2部分：根据ISO 3251测定挥发物含量和用阿基米德原理测定涂层试板上干膜密度的方法

Paints and varnishes — Determination of the percentage   volume of non-volatile matter — Part 2: Method using   the determination onon-volatile-matter content in accordance with ISO 3251   andfdetermination of dry film density on coated test panels by the Archimedes   principle

KS M ISO 3233-3-2016

色漆和清漆不挥发物体积百分比的测定第3部分：根据ISO 3251测定的不挥发物含量、涂层材料密度和涂层材料中溶剂密度的计算测定

Paints and varnishes ━ Determination of the percentage   volume of non-volatile matter ━ Part 3: Determination   by calculation from the non-volatile-matter content determined in accordance   with ISO 3251, the density of the coating material and the density of the   solvent in the coating material

KS M ISO 3248-2017

色漆和清漆热效应的测定

Paints and varnishes－Determination of the effect of heat

KS M ISO 3251-2011

色漆、清漆和塑料不挥发物含量的测定

Paints, varnishes and plastics－Determination of non-volatile-matter   content

KS M ISO 3260-2017

纸浆.氯耗量(脱木素程度)的测定

Pulps－Determination of chlorine consumption(Degree of delignification)

KS M ISO 3262-1-2007

涂料用填充剂规范和试验方法第1部分：引言和一般试验方法

Extenders for paints－Specfications and methods of test－Part 1：Introduction and general test   methods

KS M ISO 3262-10-2002

涂料用填充剂规范和试验方法第10部分：片状天然滑石/亚氯酸盐

Extenders for paints－Specifications and methods of test－Part 10：Natural talc/chlorite in lamellar   form

KS M ISO 3262-11-2002

涂料用填充剂规范和试验方法第11部分：含碳酸盐的片状天然滑石

Extenders for paints－Specifications and methods of test－Part 11：Natural talc, in lamellar form,   containing carbonates

KS M ISO 3262-12-2002

涂料用填充剂规范和试验方法第12部分：白云母型云母

Extenders for paints－Specifications and methods of test－Part 12：Muscovite－type   mica

KS M ISO 3262-13-2002

涂料用填充剂规范和试验方法第13部分：天然石英（磨）

Extenders for paints－Specifications and methods of test－Part 13：Natural quartz(ground)

KS M ISO 3262-14-2007

涂料用填充剂规范和试验方法第14部分：方石英

Extenders for paints－Specifications and methods of test－Part 14：Cristobalite

KS M ISO 3262-15-2007

涂料用填充剂规范和试验方法第15部分：水曲柳硅

Extenders for paints－Specification and methods of test－Part 15：Vtreous silica

KS M ISO 3262-16-2002

涂料用填充剂规范和试验方法第16部分：氢氧化铝

Extenders for paints－Specifications and methods of test－Part 16 : Aluminium hydroxides

KS M ISO 3262-17-2007

涂料用填充剂规范和试验方法第17部分：沉淀硅酸钙

Extenders for paints－Specifications and methods of test－Part 17：Precipitated calcium silicate

KS M ISO 3262-18-2007

涂料用填充剂规范和试验方法第18部分：沉淀硅酸铝钠

Extenders for paints－Specifications and methods of test－Part 18：Precipitated sodium aluminium   silicate

KS M ISO 3262-19-2007

涂料用填充剂规范和试验方法第19部分：沉淀二氧化硅

Extenders for paints－Specifications and methods of test－Part 19：Precipitated silica

KS M ISO 3262-2-2007

涂料用填充剂规范和试验方法第2部分：重晶石（天然硫酸钡）

Extenders for paints－Specfications and methods of test－Part 2：Barytes(natural barium sulfate)

KS M ISO 3262-20-2007

涂料用填充剂规范和试验方法第20部分：气相二氧化硅

Extenders for paints－Specifications and methods of test－Part 20：Fumed silica

KS M ISO 3262-21-2007

涂料用填充剂规范和试验方法第21部分：石英砂（地下天然石英）

Extenders for paints－Specifications and methods of test－Part 21：Silica sand(unground natural   quartz)

KS M ISO 3262-22-2007

涂料用填充剂规范和试验方法第22部分：煅烧硅藻土

Extenders for paints－Specifications and methods of test－Part 22：Flux-calcined kieselguhr

KS M ISO 3262-3-2007

涂料用填充剂规范和试验方法第3部分：固色剂

Extenders for paints－Specifications and methods of test－Part 3：Blanc fixe

KS M ISO 3262-4-2007

涂料用填充剂规范和试验方法第4部分：白色

Extenders for paints－Specifications and methods of test－Part 4：Whiting

KS M ISO 3262-5-2007

涂料用填充剂规范和试验方法第5部分：天然结晶碳酸钙

Extenders for paints－Specifications and methods of test－Part 5：Natural crystalline calcium   carbonate

KS M ISO 3262-6-2007

涂料用填充剂规范和试验方法第6部分：沉淀碳酸钙

Extenders for paints－Specification and methods of test－Part 6：Precipitated calcium carbonate

KS M ISO 3262-7-2002

涂料用填充剂规范和试验方法第7部分：白云石

Extenders for paints－Specifications and methods of test－Part 7：Dolomite

KS M ISO 3262-8-2007

涂料用填充剂规范和试验方法第8部分：天然粘土

Extenders for paints－Specifications and methods of test－Part 8：Natural clay

KS M ISO 3262-9-2007

涂料用填充剂规范和试验方法第9部分：煅烧粘土

Extenders for paints－Specifications and methods of test－Part 9：Calcined clay

KS M ISO 3270-2017

色漆和清漆及其原料调节及试验的温度和湿度

Paints and varnishes and their raw   materials－Temperature and   humidities for conditioning and testing

KS M ISO 3298-2002

摄影冲洗用化学品水乙酸规范

Photography－Processing chemicals－Specifications   for glacial acetic acid

KS M ISO 3299-2002

摄影加工用化学品1-苯基-3-吡唑啉酮规范

Photography－Processing chemicals－Specifications   for 1－phenyl－3－pyrazolidinone

KS M ISO 3302-1-2008

橡胶产品公差第1部分：尺寸公差

Rubber－Tolerances for products－Part 1：Dimensional tolerances

KS M ISO 3302-2-2008

橡胶制品公差第2部分：几何公差

Rubber－Tolerances for products－Part 2：Geometrical tolerances

KS M ISO 3303-1-2014

橡胶或塑料涂层织物破裂强度的测定第1部分：钢球法

Rubber- or plastics- coated fabrics — Determination of bursting strength — Part 1: Steel-ball method

KS M ISO 3303-2-2014

橡胶或塑料涂层织物.爆裂强度的测定.第2部分：液压法

Rubber- or plastics-coated fabrics — Determination of bursting strength —   Part 2: Hydraulic method

KS M ISO 3332-2017

工业用硝酸铵氮总含量的测定.蒸馏后滴定法

Ammonium sulphate for industrial use — Determination of ammoniacal nitrogen   content — Titrimetric method after distillation

KS M ISO 3357-2017

工业用三聚磷酸钠和焦磷酸钠.氧化磷(v)总含量的测定.磷钼酸喹啉重量法

Sodium tripolyphosphate and sodium   pyrophosphate for industrial use — Determination of total phosphorus(V) oxide content — Quinoline phosphomolybdate gravimetric method

KS M ISO 3360-2017

工业(包括食品工业)用磷酸和磷酸钠.氟含量的测定.茜素配位酮和硝酸镧光度法

Phosphoric acid and sodium phosphates for   industrial use(including foodstuffs) — Determination of fluorine content —   Alizarin complexone and lanthanum nitrate photometric method

KS M ISO 3363-2017

工业用氟氯代烃.酸度的测定.滴定法

Fluorochlorinated hydrocarbons for   industrial use－Determination of   acidity－Titrimetric method

KS M ISO 3376-2014

皮革.物理和机械试验.抗张拉强度和伸长率的测定

Leather — Physical and mechanical tests —   Determination of tensile strength and percentage extension

KS M ISO 3377-1-2013

皮革_物理力学试验_撕裂负荷的测定_第1部分：单边撕裂

Leather ㅡ   Physical and mechanical tests ㅡ   Determination of tear load ㅡ Part 1: Single   edge tear

KS M ISO 3377-2-2008

皮革物理力学试验撕裂负荷的测定第2部分：双边撕裂

Leather－Physical and mechanical tests－Determination   of tear load－Part 2：Double   edge tear

KS M ISO 3378-2004

皮革.物理和机械试验.粒面抗裂强度和折裂指数的测定

Leather－Physical and mechanical tests－Determination   of resistance to grain cracking and grain crack index

KS M ISO 3379-2016

皮革.粒面崩破强度和崩裂高度的测定.崩裂试验

Leather－Determination of distension and strength of grain－Ball burst test

KS M ISO 3380-2004

皮革.物理和机械试验.100℃以下的收缩温度的测定

Leather－Physical and mechanical tests－Determination   of shrinkage temperature up to 100℃

KS M ISO 3384-1-2014

硫化橡胶或热塑性橡胶.压缩应力松弛的测定.第1部分：恒温试验

Rubber, vulcanized or thermoplastic — Determination of stress relaxation   in compression — Part 1: Testing at constant   temperature

KS M ISO 3384-2-2014

硫化橡胶或热塑性橡胶.压缩应力松弛的测定.第2部分：温度循环试验

Rubber, vulcanized or thermoplastic — Determination of stress relaxation   in compression — Part 2: Testing with temperature   cycling

KS M ISO 3385-2017

软质泡沫聚合材料恒载荷冲击疲劳试验方法

Flexible cellular polymeric materials－Determination of fatigue by   constant-load pounding