KS M ISO 11125-6-2002

涂装油漆和有关产品前钢材预处理喷射清理用金属磨料的试验方法第6部分：杂质的测定

Preparation of steel substrates before   application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 6：Determination of foreign matter

KS M ISO 11125-7-2002

涂装油漆和有关产品前钢材预处理喷射清理用金属磨料的试验方法第7部分：湿度的测定

Preparation of steel substrates before   application of paints and related products－Test methods for metallic blast - cleaning abrasives－Part 7：Determination of moisture

KS M ISO 11126-1-2002

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料规范第1部分：一般介绍和分类

Preparation of steel substrates before   application of paints and related products -Specifications for non-metallic   blast-cleaning abrasives - Part 1：General introduction and classification

KS M ISO 11126-10-2002

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料规范第10部分：铁铝榴石

Preparation of steel substrates before   application of paints and related products - Specifications for non-metallic   blast-cleaning abrasives - Part 10：Almandite garnet

KS M ISO 11126-3-2002

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料规范第3部分：炼铜渣

Preparation of steel substrates before   application of paints and related products - Specifications for non-metallic   blast-cleaning abrasives - Part 3：Copper refinery slag

KS M ISO 11126-4-2002

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的技术要求第4部分：煤炉熔渣

Preparation of steel substrates before   application of paints and related products - Specifications for non-metallic   blast-cleaning abrasives－Part 4：Coal furnace slag

KS M ISO 11126-5-2002

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料规范第5部分：镍精炼渣

Preparation of steel substrates before   application of paints and related products - Specifications for non-metallic   blast-cleaning abrasives - Part 5：Nickel refinery slag

KS M ISO 11126-6-2002

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料规范第6部分：铁炉熔渣

Preparation of steel substrates before   application of paints and related products - Specifications for non-metallic   blast-cleaning abrasives - Part 6：Iron furnace slag

KS M ISO 11126-7-2002

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料规范第7部分：熔融氧化铝

Preparation of steel substrates before   application of paints and related products - Specifications for non-metallic   blast-cleaning abrasives - Part 7：Fused aluminium oxide

KS M ISO 11126-8-2002

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料规范第8部分：橄榄石砂

Preparation of steel substrates before   application of paints and related products - Specifications for non-metallic   blast-cleaning abrasives - Part 8：Olivine sand

KS M ISO 11126-9-2002

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料规范第9部分：十字石

Preparation of steel substrates before   application of paints and related products - Specifications for non-metallic   blast-cleaning abrasives - Part 9：Staurolite

KS M ISO 11127-1-2012

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第1部分：取样

Preparation of steel substrates before   application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 1：Sampling

KS M ISO 11127-2-2012

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第2部分：粒度分布的测定

Preparation of steel substrates before   application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 2：Determination of particle size   distribution

KS M ISO 11127-3-2012

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第3部分：表观密度的测定

Preparation of steel substrates before   application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 3：Determination of apparent density

KS M ISO 11127-4-2012

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第4部分：用玻璃滑动试验评定硬度

Preparation of steel substrates before   application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 4：Assessment of hardness by a glass   slide test

KS M ISO 11127-5-2013

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第5部分：湿度的测定

Preparation of steel substrates before   application of paints and related products — Test methods for non-metallic blast-cleaning   abrasives-Part 5: Determination of moisture

KS M ISO 11127-6-2013

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第6部分：用电导率测量法测定水溶性污染物

Preparation of steel substrates before   application of paints and related products-Test methods for non-metallic   blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by   conductivity measurement

KS M ISO 11127-7-2013

涂装油漆和有关产品前钢材预处理喷射清理用非金属磨料的试验方法第7部分：水溶性氯化物的测定

Preparation of steel substrates before   application of paints and related products — Test methods for non-metallic blast-cleaning   abrasives — Part 7: Determination of water-soluble   chlorides

KS M ISO 11158-2011

润滑剂、工业润滑油和有关产品(L类).H组(液压系统)HH、HL、HM、HR、HV和HG各品种的规范

Lubricants, industrial oils and related   products(class L)－Family   H(hydraulic systems)－Specifications for categories   HH, HL, HM, HR, HV, and HG

KS M ISO 11193-1-2016

一次性医用检验手套第1部分：橡胶胶乳或橡胶溶液制手套规范

Single-use medical examination gloves－Part 1：Specification   for gloves made from rubber latex or rubber solution

KS M ISO 11193-2-2009

一次性医用检验手套第2部分：聚氯乙烯手套规范

Single-use medical examination gloves－Part 2：Specification   for gloves made from poly(vinyl chloride)

KS M ISO 11223-2014

石油和液态石油产品.直接静态测量.通过静压油罐计量测量立式贮罐容量

Petroleum and liquid petroleum products — Direct static measurements — Measurement of content of vertical storage tanks by hydrostatic   tank gauging

KS M ISO 11234-2007

橡胶配合剂.粒状炭黑.尘埃含量的测定

Rubber compounding ingredients－Carbon black(pelletized)－Determination of dust content

KS M ISO 11235-2017

橡胶配合剂.次磺酰胺促进剂试验方法

Rubber compounding ingredients－Sulfenamide accelerators－Test methods

KS M ISO 11236-2007

橡胶配合剂对苯二胺（PPD）抗降解剂试验方法

Rubber compounding ingredients－p-Phenylenediamine(PPD)   antidegradants－Test methods

KS M ISO 11237-2012

橡胶软管和软管组合件油基或水基流体用紧凑型钢丝编织增强液压型规范

Rubber hoses and hose assemblies－ Compact wire-braid-reinforced   hydraulic types for oil-based or water-based fluids－Specification

KS M ISO 1124-2002

橡胶配合剂.炭黑装运取样规程

Rubber compounding ingredients－Carbon black shipment sampling   procedures

KS M ISO 11248-2007

塑料热固性模塑料高温短期性能评价

Plastics－Thermosetting moulding materials－Evaluation   of shortterm performance at elevated temperatures

KS M ISO 1125-2017

橡胶配合剂.炭黑.灰分测定

Rubber compounding ingredients－Carbon black－Determination   of ash

KS M ISO 1133-1-2012

塑料热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定第1部分：标准方法

Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow   rate(MVR) of thermoplastics－Part 1：Standard method

KS M ISO 1133-2-2016

塑料热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定第2部分：对时间-温度历程和/或湿度敏感的材料的测定方法

Plastics － Determination of the melt mass-flow rate (MFR) and   melt volume-flow rate (MVR) of thermoplastics － Part   2: Method for materials sensitive to time-temperature history and/or moisture

KS M ISO 11339-2013

粘合剂.挠性粘合组件的T-剥离试验

Adhesives -- T-peel test for   flexible-to-flexible bonded assemblies

KS M ISO 11343-2010

粘合剂.在冲击条件下高强度胶粘剂耐动态劈裂的测定.楔形物冲击法

Adhesives－Determination of dynamic resistance to cleavage of   high-strength adhesive bonds under impact conditions－Wedge   impact method

KS M ISO 11344-2017

合成生橡胶.用凝胶渗胶透色谱法测定溶液聚合物的分子质量分布

Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation   chromatography

KS M ISO 11345-2007

橡胶炭黑和炭黑/二氧化硅分散度的评定快速比较法

Rubber－Assessment of carbon black and carbon black/silica dispersion－Rapid comparative methods

KS M ISO 11346-2017

硫化或热塑性橡胶.使用寿命和最高温度的估计

Rubber, vulcanized or thermoplastic－Estimation of life－time and maximum temperature of use

KS M ISO 11357-1-2016

塑料差示扫描量热法（DSC）第1部分：总则

Plastics－Differential scanning calorimetry(DSC)－Part   1：General principles

KS M ISO 11357-2-2015

塑料.差示扫描量热法（DSC）.第2部分：玻璃化转变温度的测定

Plastics — Differential scanning calorimetry(DSC) — Part 2：Determination of glass transition   temperature

KS M ISO 11357-3-2013

塑料.差示扫描量热法（DSC）.第3部分：熔化和结晶的温度和焓的测定

Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and   crystallization

KS M ISO 11357-4-2016

塑料差示扫描量热法（DSC）第4部分：比热容的测定

Plastics－Differential scanning calorimetry(DSC)－Part   4：Determination of specific heat capacity

KS M ISO 11357-5-2015

塑料差示扫描量热法（DSC）第5部分：反应曲线特征温度和时间、反应焓和转化度的测定

Plastics－Differential scanning calorimetry(DSC)－Part   5：Determination of characteristic reaction-curve   temperatures and times, enthalpy of reaction and degree of conversion

KS M ISO 11357-6-2013

塑料差示扫描量热法（DSC）第6部分：氧化诱导时间的测定

Plastics ㅡ   Differential scanning calorimetry (DSC) ㅡ   Part 6: Determination of oxidation induction time

KS M ISO 11357-7-2016

塑料.差示扫描量热法（DSC）.第7部分：结晶动力学的测定

Plastics — Differential scanning calorimetry(DSC) — Part 7：Determination of crystallization   kinetics

KS M ISO 11358-1-2017

塑料.聚合物的热重分析法（TG）.第1部分：一般原理

Plastics - Thermogravimetry(TG) of polymers   - Part1: General principles

KS M ISO 11358-2-2017

塑料.聚合物的热重分析法（TG）.第2部分：活化能的测定

Plastics - Thermogravimetry(TG) of polymers   - Part2: Determination of activation energy

KS M ISO 11358-3-2017

塑料.聚合物的热重分析法（TG）.第3部分：用小泽-弗里德曼曲线和反应动力学分析测定活化能

Plastics - Thermogravimetry(TG) of polymers   - Part3: Determination of the activation energy using the Ozawa-Friedman plot   and analysis of the reaction kinetics

KS M ISO 11359-1-2015

塑料热机械分析（TMA）第1部分：总则

Plastics－Thermomechanical analysis(TMA)－Part 1：General principles

KS M ISO 11359-2-2002

塑料热机械分析（TMA）第2部分：线性热膨胀系数和玻璃化转变温度的测定

Plastics－Thermomechanical analysis(TMA)－Part 2：Determination of coefficient of linear thermal expansion and glass   transition temperature

KS M ISO 11359-3-2008

塑料热机械分析（TMA）第3部分：渗透温度的测定

Plastics－Thermomechanical analysis(TMA)－Part 3：Determination of penetration temperature

KS M ISO 1138-2015

橡胶配合剂.炭黑.硫含量测定

Rubber compounding ingredients－Carbon black－Determination   of sulfur content

KS M ISO 11401-2010

塑料.酚醛树脂.用液相色谱法分离

Plastics－Phenolic resins－Separation by liquid   chromatography

KS M ISO 11402-2006

酚醛树脂、氨基树脂和缩合树脂.游离甲醛含量的测定

Phenolic amino and condensation resins－Determination of free－formaldehyde content

KS M ISO 11403-1-2016

塑料可比多点数据的采集和表示第1部分：机械性能

Plastics－Acquisition and presentation of comparable multipoint data－Part 1：Mechanical properties

KS M ISO 11403-2-2013

塑料.可比较多点数据的采集和表示.第2部分：热性能和加工性能

Plastics — Acquisition and presentation of comparable multipoint   data — Part 2: Thermal and processing properties

KS M ISO 11403-3-2017

塑料可比多点数据的采集和表示第3部分：环境对性能的影响

Plastics－Acquisition and presentation of comparable multipoint data－Part 3：Environmental influences on   properties

KS M ISO 11409-2006

塑料.酚醛树脂.用差示扫描量热法测定反应热及温度

Plastics－Phenolic resins－Determination of heats and   temperatures of reaction by differential scanning calorimetry

KS M ISO 11424-2008

内燃机的空气和真空系统用橡胶软管及其管件.规范

Rubber hoses and tubing for air and vacuum   systems for internal-combustion engines－Specification

KS M ISO 11425-2003

机动车液压转向装置用橡胶软管和软管组件.规范

Rubber hoses and hose assemblies for   automobile power－steering   systems－Specification

KS M ISO 11443-2017

塑料用毛细管和缝模流变仪测定塑料的流动性

Plastics－Determination of the fluidity of plastics using capillary and   slit-die rheometers

KS M ISO 11469-2008

塑料.塑料产品的一般鉴定和标志

Plastics－Generic identification and marking of plastics products

KS M ISO 11475-2014

纸和纸板.d65/10°CIE白度的测定（室外日光）

Paper and board — Determination of CIE whiteness,   D65/10°(outdoor daylight)

KS M ISO 11476-2017

纸和纸板.C/2°CIE白度的测定（室内照明条件）

Paper and board－Determination of CIE whiteness, C/2°(indoor illumination conditions)

KS M ISO 11480-2017

纸浆、纸和纸板总氯和有机氯的测定

Pulp, paper and board－Determination of total chlorine and   organically bound chlorine

KS M ISO 11501-2014

塑料.薄膜和薄板.加热时尺寸变化的测定

Plastics — Film and sheeting —   Determination of dimensional change on heating

KS M ISO 11502-2014

塑料.薄膜和薄板.耐阻塞性的测定

Plastics — Film and sheeting —   Determination of blocking resistance

KS M ISO 11503-2007

色漆和清漆耐湿性的测定（间歇冷凝法）

Paints and varnishes－Determination of resistance to   humidity(intermittent condensation)

KS M ISO 11542-1-2006

塑料超高分子量聚乙烯（PE-UHMW）模塑和挤塑材料第1部分：命名系统和基本规范

Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and   extrusion materials－Part 1：Designation   system and basis for specifications

KS M ISO 11542-2-2011

塑料超高分子量聚乙烯（PE-UHMW）模塑和挤塑材料第2部分：试样制备和性能测定

Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and   extrusion materials－Part 2：Preparation   of test specimens and determination of properties

KS M ISO 11556-2009

纸和纸板.利用单个垂直悬吊试验样片测定卷曲度

Paper and board－Determination of curl using a single   vertically suspended test piece

KS M ISO 11561-2009

绝热材料老化闭孔塑料热阻长期变化的测定（加速实验室试验方法）

Ageing of thermal insulation materials－Determination of the long-term change   in thermal resistance of closed-cell plastics(accelerated laboratory test   methods)

KS M ISO 1158-2002

塑料.氯乙烯均聚物和共聚物.氯含量的测定

Plastics－Vinyl chloride homopolymers and copolymers－Determination of chlorine content

KS M ISO 1163-1-2006

塑料.未增塑聚氯乙烯（PVC-U）模塑和挤塑材料.第1部分：命名系统和基本规范

Plastics - Unplasticized poly(vinyl   chloride)(PVC-U) moulding and extrusion materials - Part 1 : Designation   system and basis for specifications

KS M ISO 1163-2-2016

塑料.未增塑聚氯乙烯（PVC-U）模塑和挤塑材料.第2部分：试样制备和性能测定

Plastics - Unplasticized poly(vinyl chloride)(PVC-U)   moulding and extrusion materials - Part 2 : Preparation of test specimens and   determination of properties

KS M ISO 11640-2016

皮革.色牢度试验.耐周期性往复摩擦的色牢度

Leather－Tests for colour fastness－Colour fastness   to cycles of to-and-fro rubbing

KS M ISO 11641-2007

皮革.色牢度试验.耐汗渍的色牢度

Leather－Tests for color fastness－Color fastness to   perspiration

KS M ISO 11642-2007

皮革.色牢度试验.耐水洗的色牢度

Leather－Tests for color fastness－Color fastness to   water

KS M ISO 11643-2007

皮革.色牢度试验.小样品耐干洗溶液的色牢度

Leather－Tests for color fastness－Color fastness of   small samples to dry-cleaning solutions

KS M ISO 11644-2007

皮革.涂层粘着牢度测定方法

Leather－Test for adhesion of finish

KS M ISO 11646-2017

皮革.面积的测量

Leather－Measurement of area

KS M ISO 11667-2002

纤维增强塑料.模塑料和预浸料.树脂、增强纤维和矿物质填料含量的测定.溶解法

Fibre－reinforced plastics－Moulding compounds and   prepregs－Determination of resin, reinforced－fibre and mineral－filler content－Dissolution methods

KS M ISO 11668-2017

色漆和清漆用粘合剂氯化聚合树脂通用试验方法

Binders for paints and varnishes－Chlorinated polymerization resins－General methods of test

KS M ISO 1167-1-2014

流体输送用热塑性塑料管、配件和组件.耐内压的测定.第1部分：一般方法

Thermoplastics pipes, fittings and   assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method

KS M ISO 1167-2-2014

流体输送用热塑性塑料管、配件和组件.耐内压的测定.第2部分：管试样的制备

Thermoplastics pipes, fittings and assemblies   for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces

KS M ISO 1167-3-2014

流体输送用热塑性塑料管、配件和组件.耐内压的测定.第3部分：部件的制备

Thermoplastics pipes, fittings and   assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components

KS M ISO 11673-2005

未增塑聚氯乙烯(PVC-U)压力管.断裂韧性测定

Unplasticized polyvinylchloride(PVC－U) pressure pipes－Determination of the fracture toughness properties

KS M ISO 1167-4-2014

流体传输用热塑管、接头和组件.抗内压力的测定

Thermoplastics pipes, fittings and   assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies

KS M ISO 1172-2002

纺织玻璃纤维增强塑料、预浸料、模塑料和层压塑料.纺织玻璃纤维和矿物质填料含量的测定.煅烧法

Textile－glass－reinforced plastics－Prepregs, moulding compounds and laminates－Determination of the textile－glass and   mineral－filler content－Calcination   methods

KS M ISO 11759-2009

输送液化石油气用橡胶软管和软管组件(LPGs).规范

Rubber hoses and hose assemblies for dispensing   liquefied petroleum gases(LPGs)－Specification

KS M ISO 11795-2007

农业拖拉机驱动轮轮胎轮胎滚动周长测量方法

Agricultural tractor drive wheel tyres－Method of measuring tyre rolling   circumference

KS M ISO 1183-1-2014

塑料.非泡沫塑料密度的测定方法.第1部分：浸入法、液体比重瓶法和滴定法

Plastics — Methods for determining the density of non-cellular   plastics — Part 1: Immersion method, liquid   pyknometer method and titration method

KS M ISO 1183-2-2014

塑料.非泡沫塑料密度的测定方法.第2部分：密度梯度柱法

Plastics — Methods for determining the density of non-cellular   plastics — Part 2: Density gradient column method

KS M ISO 1183-3-2003

塑料非泡沫塑料密度的测定方法第3部分：气体比重瓶法

Plastics－Methods for determining the density of non-cellular plastics－Part 3：Gas pyknometer method

KS M ISO 11833-1-2013

塑料_未增塑聚氯乙烯片材_类型、尺寸和特性_第1部分：厚度不小于1 mm的片材

Plastics ㅡ   Unplasticized poly(vinyl chloride) sheets ㅡ   Types, dimensions and characteristics ㅡ   Part 1: Sheets of thickness not less than 1 mm

KS M ISO 11833-2-2012

塑料未增塑聚氯乙烯片材类型、尺寸和特性第2部分：厚度小于1 mm的片材

Plastics－Unplasticized poly(vinyl chloride) sheets－Types,   dimensions and characteristics－Part 2：Sheets of thickness less than 1 mm

KS M ISO 11890-1-2017

色漆和清漆挥发性有机化合物含量的测定第1部分：差分法

Paints and varnishes－Determination of volatile organic   compound(VOC) content－Part 1：Difference   method

KS M ISO 11890-2-2014

色漆和清漆挥发性有机化合物（VOC）含量的测定第2部分：气相色谱法

Paints and varnishes — Determination of volatile organic   compound(VOC) content — Part 2: Gas-chromatographic   method

KS M ISO 11907-1-2009

塑料烟雾产生燃烧废物腐蚀性的测定第1部分：指南

Plastics－Smoke generation－Determination of the   corrosivity of fire effluents－Part 1：Guidance

KS M ISO 11907-2-2004

塑料烟雾产生燃烧废物腐蚀性的测定第2部分：静态法

Plastics－Smoke generation－Determination of the   corrosivity of fire effluents－Part 2：Static method

KS M ISO 11907-3-2004

塑料烟雾产生燃烧废物腐蚀性的测定第3部分：移动式炉动态分解法

Plastics－Smoke generation－Determination of the   corrosivity of fire effluents－Part 3：Dynamic decomposition method using a travelling furnace

KS M ISO 11907-4-2004

塑料烟雾产生燃烧废物腐蚀性的测定第4部分：用锥形辐射加热器动态分解法

Plastics－Smoke generation－Determination of the   corrosivity of fire effluents－Part 4：Dynamic decomposition method using a conical radiant heater

KS M ISO 11908-2017

色漆和清漆用粘合剂氨基树脂通用试验方法

Binders for paints and varnishes－Amino resins－General   methods of test

KS M ISO 11909-2012

色漆和清漆用粘合剂多异氰酸酯树脂通用试验方法

Binders for paints and varnishes－Polyisocyanate resins－ General methods of test

KS M ISO 11922-1-2003

流体输送用热塑性塑料管材.尺寸和偏差.第1部分:公制系列

Thermoplastics pipes for the conveyance of   fluids－Dimensions and   tolerances－Part 1：Metric series

KS M ISO 11930-2014

化妆品.微生物学.化妆品抗菌保护的评价

Cosmetics — Microbiology — Evaluation of   the antimicrobial protection of a cosmetic product

KS M ISO 11963-2014

塑料.聚碳酸酯板.类型、尺寸和特性

Plastics — Polycarbonate sheets — Type,   dimensions and characteristics

KS M ISO 11997-1-2011

色漆和清漆耐周期性腐蚀的测定第1部分：湿（盐雾）/干/湿

Paints and varnishes－Determination of resistance to cyclic   corrosion conditions－Part 1：Wet(salt   fog)/dry/humidity

KS M ISO 11997-2-2014

色漆和清漆耐周期性腐蚀的测定第2部分：湿（盐雾）/干/湿/紫外线

Paints and varnishes — Determination of resistance to   cyclic corrosion conditions — Part 2: Wet(salt   fog)/dry/humidity/UV light

KS M ISO 11998-2008

色漆和清漆涂层耐湿擦洗性和可清洗性的测定

Paints and varnishes－Determination of wet-scrub resistance   and cleanability of coatings

KS M ISO 12017-2014

塑料.聚甲基丙烯酸甲酯双层和三层皮肤板.试验方法

Plastics — Poly(methyl methacrylate) double-and triple-skin   sheets — Test methods

KS M ISO 12058-1-2006

塑料.用落球粘度计测定粘度.第1部分：斜管法

Plastics - Determination of viscosity using   a falling-ball viscometer－Part 1：Inclined-tube method

KS M ISO 12086-1-2013

塑料.含氟聚合物分散体、模塑和挤塑材料.第1部分：命名系统和基本规范

PLASTICS — FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION   MATERIALS — PART 1: DESIGNATION SYSTEM AND BASIS FOR   SPECIFICATIONS

KS M ISO 12086-2-2016

塑料含氟聚合物分散体模塑和挤塑材料第2部分：试样制备和性能测定

Plastics－Fluoropolymer dispersions and moulding and extrusion materials－Part 2：Preparation of test specimens and   determination of properties

KS M ISO 1209-1-2012

硬质泡沫塑料弯曲性能的测定第1部分：基本弯曲试验

Rigid cellular plastics－Determination of flexural properties－Part 1：Basic bending test

KS M ISO 1209-2-2012

硬质泡沫塑料弯曲性能的测定第2部分：弯曲强度和表观弯曲弹性模量的测定

Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength   and apparent flexural modulus of elasticity

KS M ISO 12114-2002

纤维增强塑料.热固性模压塑料和预浸料.固化特性的测定

Fibre－reinforced plastics－Thermosetting moulding   compounds and prepregs－Determination of cure   characteristics

KS M ISO 12115-2002

纤维增强塑料.热固性模压塑料和预浸料.流动性、熟化期和适用期的测定

Fibre－reinforced plastics－Thermosetting moulding   compounds and prepregs－Determination of flowability,   maturation and shelf life

KS M ISO 12137-2012

色漆和清漆耐沾污性的测定

Paints and varnishes－Determination of mar resistance

KS M ISO 1215-2004

商品干燥原软木、软木栓皮碎料、软木废物和软木残渣.定义和包装

Commercially dry virgin cork, ramassage,   gleanings, corkwood refuse and corkwaste－Definitions and packaging

KS M ISO 1216-2004

软木板.分级.分类和包装

Corkwood in planks－Grading, classification and packing

KS M ISO 12162-2016

压力用热塑性塑料管材和管件分级和命名.总体使用(设计)系数

Thermoplastics materials for pipes and   fittings for pressure applications－ Classification and designation－Overall   service (design) coefficient

KS M ISO 12185-2003

原油和石油产品.密度的测定.振动的U形管法

Crude petroleum and petroleum products－Determination of density－Oscillating U－tube method

KS M ISO 12192-2014

纸和纸板.压缩强度.纸张的抗压性试验方法

Paper and board — Determination of compressive   strength — Ring crush method

KS M ISO 12243-2017

天然橡胶乳胶制医用手套.用改进的Lowry法测定水萃取蛋白

Medical gloves made from natural rubber   latex — Determination of   water-extractable protein using the modified Lowry method

KS M ISO 123-2007

橡胶胶乳.取样

Rubber latex－Sampling

KS M ISO 1232-2003

主要用于铝生产的氧化铝.二氧化硅含量的测定.钼蓝光度法

Aluminium oxide primarily used for the   production of aluminium－Determination   of silica content－Reduced molybdosilicate   spectrophotometric method

KS M ISO 124-2014

胶乳.橡胶.固态物质总含量的测定

Latex, rubber — Determination of total solids   content

KS M ISO 1248-2013

氧化铁颜料.规范和试验方法

Iron oxide pigments — Specifications and methods of test

KS M ISO 1249-2013

铬酸锌颜料碱性铬酸锌钾颜料和四羟基铬酸锌颜料

Zinc chromate pigments — Basic zinc potassium chromate   pigments and zinc tetrahydroxychromate pigments

KS M ISO 125-2015

浓缩天然胶乳.碱度测定

Natural rubber latex concentrate－Determination of alkalinity

KS M ISO 126-2009

浓缩天然胶乳干胶含量的测定

Natural rubber latex concentrate－Determination of dry rubber content

KS M ISO 12625-1-2014

薄纸和薄纸制品.第1部分：术语的一般指南

Tissue paper and tissue products — Part 1: General guidance on terms

KS M ISO 12625-11-2014

薄纸和薄纸制品.第11部分：湿球爆裂强度的测定

Tissue paper and tissue products — Part 11: Determination of wet ball   burst strength

KS M ISO 12625-3-2016

薄纸和薄纸制品第3部分：厚度、膨胀厚度和表观体积密度的测定

Tissue paper and tissue products－Part 3：Determination   of thickness, bulking thickness and apparent bulk density

KS M ISO 12625-4-2016

薄纸和薄纸制品第4部分：拉伸强度、断裂拉伸和拉伸能量吸收的测定

Tissue paper and tissue products－Part 4：Determination   of tensile strength, stretch at break and tensile energy absorption

KS M ISO 12625-5-2016

薄纸及其制品第5部分：湿拉伸强度的测定

Tissue paper and tissue products－Part 5：Determination   of wet tensile strength

KS M ISO 12625-6-2016

薄纸和薄纸制品第6部分：克数的测定

Tissue paper and tissue products－Part 6：Determination   of grammage

KS M ISO 12625-8-2014

薄纸和薄纸制品.第8部分：吸水时间和吸水能力.篮子浸水试验方法

Tissue paper and tissue products — Part 8 : Water-absorption time and   water-absorption capacity, basket-immersion test method

KS M ISO 12625-9-2016

薄纸和薄纸制品第9部分：破球强度的测定

Tissue paper and tissue products－Part 9：Determination   of ball burst strength

KS M ISO 1268-1-2002

纤维增强塑料试验板的生产方法第1部分：通用条件

Fibre－reinforced plastics－Methods of producing   test plates－Part 1：General   conditions

KS M ISO 1268-3-2002

纤维增强塑料试验板的生产方法第3部分：湿压成型

Fibre－reinforced plastics－Methods of producing   test plates－Part 3：Wet   compression moulding

KS M ISO 1268-6-2002

纤维增强塑料试验板生产方法第6部分：拉挤成型

Fibre－reinforced plastics－Methods of producing   test plates－Part 6：Pultrusion   moulding

KS M ISO 1268-8-2012

纤维增强塑料试验板的生产方法第8部分：SMC和BMC的压塑

Fibre-reinforced plastics－Methods of producing test plates－Part 8：Compression moulding of SMC and BMC

KS M ISO 1268-9-2012

纤维增强塑料试验板生产方法第9部分：GMT/STC的成型

Fibre-reinforced plastics－Methods of producing test plates－Part 9：Moulding of GMT/STC

KS M ISO 127-2008

浓缩天然橡胶胶乳.氢氧化钾值的测定

Rubber, natural latex concentrate－Determination of KOH number

KS M ISO 12787-2014

化妆品.分析方法.用色谱技术分析结果的验证标准

Cosmetics — Analytical methods —   Validation criteria for analytical results using chromatographic techniques

KS M ISO 12830-2013

纸、纸板和纸浆.酸溶性镁、钙、锰、铁、铜、钠和钾的测定

Paper, board and pulps — Determination of acid-soluble   magnesium, calcium, manganese, iron, copper, sodium and potassium

KS M ISO 12917-1-2003

石油和液体石油产品卧式圆筒形罐的标定第1部分：手工法

Petroleum and liquid petroleum products－Calibration of horizontal cylindrical   tanks－Part 1：Manual methods

KS M ISO 12917-2-2003

石油和液体石油产品卧式圆筒形罐的标定第2部分：内电光测距法

Petroleum and liquid petroleum products－Calibration of horizontal cylindrical   tanks－Part 2：Internal electro－optical distance－ranging method

KS M ISO 12922-2013

润滑剂、工业润滑油和有关产品(L类).H组(液压系统).HFAE、HFAS、HFB、HFC、HFDR

Lubricants, industrial oils and related   products(class L) —   Family H(Hydraulic systems) — Specifications for   categories HFAE, HFAS, HFB, HFC, HFDR and HFDU

KS M ISO 12924-2013

润滑剂、工业用油和有关产品（L类）.X系列（润滑脂）.规范

Lubricants, industrial oils and related   products (Class L) —   Family X (Greases) — Specification

KS M ISO 12925-1-2016

润滑剂、工业润滑油和有关产品(L类).C组(齿轮).第1部分:密式齿轮系统用润滑剂规格

Lubricants, industrial oils and related   products(calss L)－Family   C(Gears)－ Part 1：Specifications   for lubricants for enclosed gear systems

KS M ISO 12937-2003

石油产品.水分的测定.库仑卡尔·费休滴定法

Petroleum products－Determination of water－Coulometric Karl Fischer titration method

KS M ISO 12944-1-2008

色漆和清漆防护漆体系对钢结构的腐蚀防护第1部分：总则

Paints and varnishes－Corrosion protection of steel   structures by protective paint systems－Part 1：General introduction

KS M ISO 12944-2-2008

色漆和清漆防护漆体系对钢结构的腐蚀防护第2部分：环境分类

Paints and varnishes－Corrosion protection of steel   structures by protective paint systems－Part 2：Classification of environments

KS M ISO 12944-3-2008

色漆和清漆防护漆体系对钢结构的腐蚀防护第3部分：设计考虑

Paints and varnishes－Corrosion protection of steel   structures by protective paint systems－Part 3：Design considerations

KS M ISO 12944-4-2008

色漆和清漆防护漆体系对钢结构的腐蚀防护第4部分：表面类型和表面处理

Paints and varnishes－Corrosion protection of steel   structures by protective paint systems－Part 4：Types of surface and surface preparation

KS M ISO 12944-5-2013

涂料和清漆.防护漆系统对钢结构的腐蚀防护.第5部分：防护漆系统

Paints and varnishes — Corrosion protection of steel   structures by protective paint systems — Part 5:   Protective paint systems

KS M ISO 12944-6-2008

色漆和清漆防护漆体系对钢结构的腐蚀防护第6部分：实验室性能试验方法

Paints and varnishes－Corrosion protection of steel   structures by protective paint systems－Part 6：Laboratory performance test methods

KS M ISO 12944-7-2008

色漆和清漆防护漆体系对钢结构的腐蚀防护第7部分：油漆工程的实施和监督

Paints and varnishes－Corrosion protection of steel   structures by protective paint systems－Part 7：Execution and supervision of paint work

KS M ISO 12944-8-2008

色漆和清漆防护漆体系对钢结构的腐蚀防护第8部分：新工作和维修规范的制定

Paints and varnishes－Corrosion protection of steel structures   by protective paint systems－Part 8：Development of specifications for new work and maintenance

KS M ISO 12965-2007

丁二烯橡胶.红外光谱法测定微观结构

Butadiene rubber－Determination of microstructure by   infra－red spectrometry

KS M ISO 12977-2004

铝生产用碳素材料.电极用沥青.挥发分的测定

Carbonaceous materials used in the   production of aluminium－Pitch   for electrodes－Determination of volatile matter   content

KS M ISO 12979-2004

铝生产用碳素材料.电极用沥青.喹啉不溶物中C/H比的测定

Carbonaceous materials used in the   production of aluminium－Pitch   for electrodes－Determination of C/H ratio in the   quinoline-insoluble fraction

KS M ISO 12984-2004

铝生产用碳素材料.煅烧焦.粒度分布的测定

Carbonaceous materials used in the   production of aluminium－Calcined   coke－Determination of particle size distribution

KS M ISO 12985-1-2004

铝焙阳极和阴极块生产用含碳材料第1部分：用尺寸法测定表观密度

Carbonaceous materials used in the   production of aluminium－Baked   anodes and cathode blocks－Part 1：Determination of apparent density using a dimensions method

KS M ISO 12986-2-2016

铝生产用含碳材料预焙阳极和阴极块第2部分：用Foru点法测定弯曲强度

Carbonaceous materials used in the   production of aluminium－Prebaked   anodes and cathode blocks－Part 2：Determination of flexural strength by the foru-point method

KS M ISO 12987-2010

铝生产用含碳材料阳极、阴极块、侧壁块和烘烤捣实糊导热系数的测定比较法

Carbonaceous material for the production of   aluminium－Anodes,cathodes   blocks, sidewall blocks and baked ramming pastes－Determination   of the thermal conductivity using a comparative method

KS M ISO 12992-2006

塑料.塑料薄膜和薄板垂直燃烧蔓延程度的测定

Plastics－Vertical flame spread determination for film and sheet

KS M ISO 13000-1-2011

塑料聚四氟乙烯（PTFE）半成品第1部分：要求和名称与符号

Plastics－Polytetrafluoroethylene(PTFE) semi-finished products－Part 1：Requirements and designation

KS M ISO 13000-2-2013

塑料聚四氟乙烯（PTFE）半成品第2部分：试样制备和性能测定

Plastics ㅡ   Polytetrafluoroethylene (PTFE) semi-finished products ㅡ Part 2: Preparation of test specimens and   determination of properties

KS M ISO 13003-2012

纤维增强塑料.周期性荷载条件下疲劳特性的测定

Fibre-reinforced plastics－Determination of fatigue properties   under cyclic loading conditions

KS M ISO 1304-2017

橡胶配合剂炭黑碘吸附值的测定

Rubber compounding ingredients－Carbon black－Determination   of iodine adsorption number

KS M ISO 1306-2009

橡胶配合剂炭黑（造粒）－浇注密度的测定

Rubber compounding ingredients－Carbon black (pelletized)－Determination of pour density

KS M ISO 1307-2008

橡胶和塑料软管软管尺寸、最小和最大内径及定尺软管公差

Rubber and plastics hoses－Hose sizes, minimum and maximum   inside diameters, and tolerances on cut-to-length hoses

KS M ISO 132-2008

硫化橡胶或热塑性橡胶弯曲裂纹和裂纹扩展的测定（德马蒂亚）

Rubber, vulcanized or thermoplastic－Determination of flex cracking and   crack growth(De Mattia)

KS M ISO 13226-2007

橡胶.用液体对硫化橡胶性能的影响评定标准参比弹性体(SREs)

Rubber－Standard reference elastomers(SREs) for characterizing the effect   of liquids on vuicanized rubbers

KS M ISO 13287-2016

个人防护用品鞋防滑试验方法

Personal protective equipment－Footwear－Test   method for slip resistance

KS M ISO 13325-2010

轮胎－用测量轮胎对道路声发射的方法进行滑行

Tyres－Coast-by methods for measurement of tyre-to-road sound emission

KS M ISO 13326-2007

测量轮胎均匀性的试验方法

Test methods for measuring tyre uniformity

KS M ISO 13328-2010

摩托车轮胎.轮胎滚动圆周长的测量方法.负载下的新轮胎

Motorcycle tyres－Measurement of tyre rolling   circumference－Loaded new tyres

KS M ISO 13357-1-2003

石油产品.润滑油可过滤性的测定.第1部分：在有水的情况下油的过滤程序

Petroleum products－Determination of the filterability of   lubricating oils－Part 1：Procedure   for oils in the presence of water

KS M ISO 13357-2-2003

石油产品.润滑油可过滤性的测定.第2部分：干油程序

Petroleum products－Determination of the filterability   oflubricating oils－Part 2：Procedure   for dry oils

KS M ISO 13398-2003

冷冻轻烃液.液化天然气.船上输油监测方法

Refrigerated light hydrocarbon fluids－Liquefied natural gas－Procedure for custody transfer on board ship

KS M ISO 13442-2010

施工机械用轮胎和轮辋

Tyres and rims for construction machines

KS M ISO 13445-2012

胶粘剂.用块剪切法测定刚性基材间胶粘剂的剪切强度

Adhesives－Determination of shear strength of adhesive bonds   between rigid substrates by the block-shear method

KS M ISO 13468-1-2007

塑料透明材料光透射率总量的测定第1部分：单光束仪

Plastics－Determination of the total luminous transmittance of transparent   materials－Part 1：Single beam   instrument

KS M ISO 13468-2-2007

塑料透明材料透光率总量的测定第2部分：双光束仪

Plastics－Determination of the total luminous transmittance of transparent   materials－Part 2：Double-beam   instrument

KS M ISO 13477-2013

流体输送用热塑性塑料管材.耐快速裂纹扩展(RCP)的测定.小尺寸稳态试验(S4试验)

Thermoplastics pipes for the conveyance of   fluids — Determination of   resistance to rapid crack propagation (RCP) —   Small-scale steady-state test (S4 test)

KS M ISO 13478-2013

流体输送用热塑性塑料管材.耐快速裂纹扩展(RCP)的测定.全尺寸试验(FST)

Thermoplastics pipes for the conveyance of   fluids — Determination of   resistance to rapid crack propagation (RCP) —   Full-scale test (FST)

KS M ISO 13479-2013

流体输送用聚烯烃管材.抗裂纹扩展的测定.切口管材慢速裂纹增长的试验方法(切口试验)

Polyolefin pipes for the conveyance of   fluids — Determination of   resistance to crack propagation — Test method for   slow crack growth on notched pipes (notch test)

KS M ISO 13480-2012

聚乙烯管材耐慢速裂纹扩展锥形试验方法

Polyethylene pipes－Resistance to slow crack growth－Cone test method

KS M ISO 13542-2008

纸和纸板.卷筒纸芯内径的规格

Paper and board－Specification for internal diameters   of cores for reels

KS M ISO 13586-2012

塑料断裂韧性的测定线性弹性断裂力学法

Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach

KS M ISO 13636-2014

塑料.薄膜和片材.无取向聚对苯二甲酸乙二醇酯（PET）片材

Plastics — Film and sheeting —   Non-oriented poly(ethylene terephathalate)(PET) sheets

KS M ISO 13736-2014

石油产品和其他液体.闪点的测定.阿贝尔闭口杯法

Determination of flash point — Abel closed-cup method

KS M ISO 13737-2005

石油产品和润滑剂.润滑剂脂的低温针入度的测定

Petroleum products and lubricants－Determination of low-temperature cone   penetration of lubricating greases

KS M ISO 13738-2012

润滑油、工业用油及有关产品（L类）－－E组（内燃机油）－－二冲程汽油机油（EGB、EGC和EGD类）规范

Lubricants, industrial oils and related   products (class L)－Family   E(Internal combustion engine oils)－Specifications for   two-stroke-cycle gasoline engine oils(categories EGB, EGC and EGD)

KS M ISO 13740-2003

原油和石油产品.输入量的计算在远洋运输中储油罐载负状态下容器组合的经验参数和减载下的容器组合经验参

Crude petroleum and petroleum products－Transfer accountability－Assessment of vessel experience factor on loading(VEFL) and vessel   experience factor on discharging(VEFD) of ocean-going tanker vessels

KS M ISO 13741-1-2006

塑料/橡胶聚合物分散体和胶乳（天然和合成）－用毛细管柱气相色谱法测定残余单体和其他有机成分－第1部分：直接液体注射法

Plastics/rubber－Polymer dispersions and rubber   latices (natural and synthetic)－Determination of   residual monomers and other organic components by capillary-column gas   chromatography－Part 1：Direct liquid   injection method

KS M ISO 13741-2-2016

塑料/橡胶聚合物分散体和胶乳（天然和合成）－用毛细管柱气相色谱法测定残余单体和其他有机成分－第2部分：顶空法

Plastics/rubber－Polymer dispersions and rubber   latices (natural and synthetic)－Determination of   residual monomers and other organic components by capillary-column gas   chromatography－Part 2：Headspace   method

KS M ISO 13757-2003

液化石油气.油残余物的测定.高温法

Liquefied petroleum gases－Determinationof oily residues－High-temperature method

KS M ISO 13758-2008

液化石油气丙烷干燥度的评定阀门冻结法

Liquefied petroleum gases－Assessment of the dryness of propane－Valve freeze method

KS M ISO 13773-2007

橡胶－氯丁胶乳－碱度的测定

Rubber－Polychloroprene latex－Determination of   alkalinity

KS M ISO 13774-2009

内燃机燃料用橡胶和塑料软管.耐燃性试验方法

Rubber and plastics hoses for fuels for   internal-combustion engines－Method of test for flammability

KS M ISO 13787-2013

建筑设备和工业装置用隔热产品申报导热率的测定

Thermal insulation products for building   equipment and industrial installations — Determination of declared thermal conductivity

KS M ISO 13802-2016

塑料摆锤式冲击试验机的检验夏比、艾卓德和拉伸冲击试验

Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing

KS M ISO 13803-2016

色漆和清漆20°时漆膜反射雾度的测定

Paints and varnishes－Determination of reflection haze on   paint films at 20°

KS M ISO 13821-2004

波纹纸板.耐沿边挤压性的测定.上蜡边法

Corrugated fibreboard－Determination of edgewise crush   resistance－Waxed edge method

KS M ISO 13846-2012

塑料管道系统热塑性压力管道用端部承载和非端部承载组件及接头内水压长期密封性试验方法

Plastics piping systems－End-load-bearing and   non-end-load-bearing assemblies and joints for thermoplastics pressure piping－Test method for long-term leaktightness under internal water   pressure

KS M ISO 1388-1-2017

工业用乙醇试验方法第1部分：总则

Ethanol for industrial use－Methods of test－Part 1：General

KS M ISO 1388-10-2017

工业用乙醇.试验方法.第10部分：碳氢化合物含量的估计.蒸馏法

Ethanol for industrial use — Methods of test — Part 10: Estimation of hydrocarbons content — Distillation method

KS M ISO 1388-11-2017

工业用乙醇.试验方法.第11部分：糠醛检测试验

Ethanol for industrial use — Methods of test — Part 11: Test for detection of furfural

KS M ISO 1388-12-2017

工业用乙醇.试验方法.第12部分：高锰酸盐时间的测定

Ethanol for industrial use — Methods of test — Part 12: Determination of permanganate time

KS M ISO 1388-2-2017

工业用乙醇.试验方法.第2部分：用酚酞测定碱度或酸度

Ethanol for industrial use — Methods of test — Part 2: Detection of alkalinity or determination of acidity to   phenolphthalein

KS M ISO 1388-3-2017

工业用乙醇.试验方法.第3部分：少量存在的羰基化合物含量的估计.光度法

Ethanol for industrial use — Methods of test — Part 3: Estimation of content of carbonyl compounds present in   small amounts — Photometric method

KS M ISO 1388-4-2017

工业用乙醇.试验方法.第4部分：中等含量的羰基化合物含量的估计.滴定法

Ethanol for industrial use — Methods of test — Part 4: Estimation of content of carbonyl compounds present in   moderate amounts — Titrimetric method

KS M ISO 1388-5-2017

工业用乙醇.试验方法.第5部分：醛含量的测定.目视比色法

Ethanol for industrial use — Methods of test — Part 5: Determination of aldehydes content — Visual colorimetric method

KS M ISO 13885-1-2012

涂料和清漆用粘合剂.凝胶渗透色谱法（GPC）.第1部分：Tetrahydrofuran（THF）作为洗脱剂

Binders for paints and varnishes－ Gel permeation chromatography(GPC)－ Part 1：Tetrahydrofuran(THF) as eluent

KS M ISO 1388-6-2017

工业用乙醇.试验方法.第6部分：与水混溶性试验

Ethanol for industrial use — Methods of test — Part 6: Test for miscibility with water

KS M ISO 1388-7-2017

工业用乙醇.试验方法.第7部分：甲醇含量[甲醇含量在0.01%到0.20%（v/v）之间]的测定.光度法

Ethanol for industrial use — Methods of test — Part 7: Determination of methanol content[methanol contents   between 0.01 % and 0.20 %(V/V)] — Photometric method

KS M ISO 1388-8-2017

工业用乙醇.试验方法.第8部分：甲醇含量[甲醇含量在0.10%到1.50%（v/v）之间]的测定.目视法

Ethanol for industrial use — Methods of test — Part 8: Determination of methanol content[methanol contents   between 0.10 % and 1.50 %(V/V)] — Visual method

KS M ISO 1388-9-2017

工业用乙醇.试验方法.第9部分：酯含量的测定.皂化后滴定法

Ethanol for industrial use — Methods of test — Part 9: Determination of esters content —   Titrimetric method after saponification

KS M ISO 1392-2004

结晶点的测定.通用方法

Determination of crystallizing point－General method

KS M ISO 13927-2016

塑料.采用锥形辐射加热器和热管探测器的简单热释放试验

Plastics－Simple heat release test using a conicalradiant heater and a   thermopile detector

KS M ISO 13966-2003

热塑性塑料管材和管件.公称环刚度

Thermoplastics pipes and fittings－Nominal ring stiffnesses

KS M ISO 13968-2015

塑料管道及导管系统.热塑性塑料管材.环揉性的测定

Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility

KS M ISO 1401-2017

农业喷雾用橡胶软管

Rubber hoses for agricultural spraying

KS M ISO 1402-2012

橡胶和塑料软管和软管组件.液压试验

Rubber and plastics hoses and hose   assemblies－Hydrostatic testing

KS M ISO 1403-2017

一般用途的输水用织物增强橡胶软管.规范

Rubber hoses, textile-reinforced, for   general-purpose water applications－Specification

KS M ISO 1407-2012

橡胶溶剂抽出物的测定

Rubber－Determination of solvent extract

KS M ISO 1408-2012

橡胶炭黑含量的测定热解和化学降解法

Rubber－Determination of carbon black content－Pyrolytic   and chemical degradation methods

KS M ISO 1409-2009

塑料/橡胶聚合物分散体和胶乳（天然和合成）－用环法测定表面张力

Plastics/rubber－Polymer dispersions and rubber   latices (natural and synthetic)－Determination of   surface tension by the ring method

KS M ISO 14125-2012

纤维增强塑料复合材料.弯曲性能的测定

Fibre-reinforced plastic composites－Determination of flexural properties

KS M ISO 14126-2012

纤维增强塑料复合材料.平面方向压缩性的测定

Fibre-reinforced plastic composites－Determination of compressive   properties in the in-plane direction

KS M ISO 14127-2014

碳纤维增强复合材料.树脂、纤维和空隙含量的测定

Carbon-fibre-reinforced composites — Determination of the resin, fibre   and void contents

KS M ISO 14129-2016

纤维增强塑料复合材料.用±45°张力试验法测定平面剪应力/剪应变特性,包括平面切变模量和剪切强度

Fibre-reinforced plastic composites－Determination of the in-plane shear   stress/shear strain response, including the in-plane shear modulus and   strength, by the ±45° tension   test method

KS M ISO 14130-2012

纤维增强塑料复合材料.用短试片法测定表观层间粘合剪切强度

Fibre-reinforced plastic composites－Determination of apparent   interlaminar shear strength by short-beam method

KS M ISO 1419-2008

橡胶或塑料涂覆织物.加速老化试验

Rubber- or plastics-coated fabrics－Accelerated-ageing tests

KS M ISO 1420-2017

橡胶或塑料涂覆织物.抗渗水性测定

Rubber- or plastics-coated fabrics — Determination of resistance to   penetration by water

KS M ISO 1421-2017

橡胶或塑料涂覆织物.拉伸强度和断裂伸长的测定

Rubber- or plastics-coated fabrics — Determination of tensile strength   and elongation at break

KS M ISO 14268-2013

皮革物理力学试验水蒸气渗透性测定

Leather ㅡ   Physical and mechanical tests ㅡ   Determination of water vapour permeability

KS M ISO 1431-1-2014

硫化橡胶或热塑性橡胶.耐臭氧龟裂性.第1部分：静态和动态应变试验

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing

KS M ISO 1431-3-2009

硫化橡胶或热塑性橡胶耐臭氧龟裂性第3部分：实验室测定臭氧浓度的参考和替代方法

Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Part 3：Reference and alternative methods   for determining the ozone concentration in laboratory test chambers

KS M ISO 1432-2014

硫化或热塑性橡胶.低温硬化(GEHMAN试验)测定

Rubber, vulcanized or thermoplastic — Determination of low temperature   stiffening (Gehman test)

KS M ISO 1434-2010

成包天然橡胶.包装量测定

Natural rubber in bales－Amount of bale coating－Determination

KS M ISO 1435-2010

橡胶配合剂炭黑（造粒）－细粉含量的测定

Rubber compounding ingredients－Carbon black(pelletized)－Determination of fines content

KS M ISO 1436-2014

橡胶软管和软管组件.油基或水基流体用钢丝编织增强液压型.规范

Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic   types for oil-based or water-based fluids —   Specification

KS M ISO 1437-2017

橡胶配合剂.炭黑.筛余物的测定

Rubber compounding ingredients－Carbon black－Determination   of sieve residue

KS M ISO 14420-2016

铝焙阳极和成形碳制品用含碳制品线热膨胀系数的测定

Carbonaceous products for the production of   aluminium－Baked anodes and   shaped carbon products－Determination of the   coefficient of linear thermal expansion

KS M ISO 14422-2004

铝生产用碳素材料.冷压糊料.取样方法

Carbonaceous materials used in the   production of aluminium－Cold-ramming   paste－Methods of sampling

KS M ISO 14423-2004

铝生产用碳素材料.冷压糊.通过喹啉萃取和测定聚焦体尺寸分布来测定有效粘接剂含量和聚焦体含量

Carbonaceous materials used in the   production of aluminium－Cold-ramming   pastes－Determination of effective binder content and   aggregate content by extraction with quinoline, and determination of   aggregate size distribution

KS M ISO 14427-2010

铝生产用含碳材料冷、温捣糊料未烘烤试样的制备及压实后表观密度的测定

Carbonaceous materials used in the   production of aluminium－Cold   and tepid ramming pastes－Preparation of unbaked test   specimens and determination of apparent density after compaction

KS M ISO 14435-2016

铝生产用含碳材料石油焦电感耦合等离子体原子发射光谱法测定痕量金属

Carbonaceous materials for the production   of aluminium－Petroleum coke－Determination of trace metals by inductively coupled plasma atomic   emission spectrometry

KS M ISO 14446-2007

色漆和清漆用粘合剂工业硝酸纤维素溶液粘度的测定及其分类

Binders for paints and varnishes－Determination of the viscosity of   industrial cellulose nitrate solutions and classification of such solutions

KS M ISO 14453-2016

纸浆丙酮可溶物的测定

Pulps－Determination of acetone-soluble matter

KS M ISO 14487-2017

纸浆.物理试验用标准水

Pulps－Standard water for physical testing

KS M ISO 14526-1-2007

塑料－酚醛粉末模塑化合物（PF-PMCs）－第1部分：命名系统和基本规范

Plastics－Phenolic powder moulding compounds(PF-PMCs)－Part 1：Designation system and basis for   specifications

KS M ISO 14526-2-2007

塑料－酚醛粉末模塑料（PF－PMCS）－第2部分：试样的制备和性能的测定

Plastics－Phenolic powder moulding compounds(PF－PMCs)－Part 2：Preparation of test specimens and   determination of properties

KS M ISO 14526-3-2006

塑料－酚醛粉末模塑料（PF－PMCS）－第3部分：对所选模塑料的要求

Plastics－Phenolic powder moulding compounds(PF－PMCs)－Part 3：Requirements for selected moulding   compounds

KS M ISO 14527-1-2008

塑料－脲醛和脲/蜜胺甲醛粉末模塑化合物（UF-和UF/MF-PMCS）－第1部分：命名系统和基本规范

Plastics－Urea-formaldehyde and urea/melamine-formaldehyde powder moulding   compounds(UF- and UF/MF-PMCs)－Part 1：Designation system and basis for specifications

KS M ISO 14527-2-2008

塑料脲醛和脲/蜜胺甲醛粉末模塑化合物（UF-和UF/MF-PMCS）第2部分：试样制备和性能测定

Plastics－Urea-formaldehyde and urea/melamine-formaldehyde powder moulding   compounds(UF- and UF/MF-PMCs)－Part 2：Preparation of test specimens and determination of properties

KS M ISO 14527-3-2008

塑料－脲醛和脲/蜜胺甲醛粉末模塑化合物（UF-和UF/MF-PMCS）－第3部分：对所选模塑化合物的要求

Plastics－Urea-formaldehyde and urea/melamine-formaldehyde powder moulding   compounds(UF- and UF/MF-PMCs)－Part 3：Requirements for selected moulding compounds

KS M ISO 14528-1-2008

塑料－三聚氰胺－甲醛粉末模塑料（MF-PMCs）－第1部分：命名体系和基本规范

Plastics－Melamine-formaldehyde powder moulding compounds(MF-PMCs)－Part 1：Designation system and basis for   specifications

KS M ISO 14528-2-2008

塑料－三聚氰胺－甲醛粉末模塑料（MF-PMCs）－第2部分：试样的制备和性能的测定

Plastics－Melamine-formaldehyde powder moulding compounds(MF-PMCs)－Part 2：Preparation of test specimens and   determination of properties

KS M ISO 14528-3-2003

塑料－三聚氰胺－甲醛粉末模塑料（MF-PMCs）－第3部分：对所选模塑料的要求

Plastics－Melamine-formaldehyde powder moulding compounds(MF-PMCs)－Part 3：Requirements for selected moulding   compounds

KS M ISO 14529-1-2006

塑料－三聚氰胺/酚醛粉末模塑化合物（MP－PMCS）－第1部分：命名系统和基本规范

Plastics－Melamine/phenolic powder moulding compounds(MP－PMCs)－Part 1：Designation   system and basis for specifications

KS M ISO 14529-2-2006

塑料－三聚氰胺/酚醛粉末模塑化合物（MP－PMCs）－第2部分：试样制备和性能测定

Plastics－Melamine/phenolic powder moulding compounds(MP－PMCs)－Part 2：Preparation   of test specimens and determination of properties

KS M ISO 14529-3-2006

塑料－三聚氰胺/酚醛粉末模塑料（MP－PMCS）－第3部分：对所选模塑料的要求

Plastics－Melamine/phenolic powder moulding compounds(MP－PMCs)－Part 3：Requirements   for selected moulding compounds

KS M ISO 14530-1-2006

塑料－不饱和－聚酯粉末模塑料（UP－PMCS）－第1部分：命名体系和基本规范

Plastics－Unsaturated－polyester powder moulding   compounds(UP－PMCs)－Part 1：Designation system and basis for specifications

KS M ISO 14530-2-2006

塑料不饱和聚酯粉末模塑料（UP－PMCS）第2部分：试样制备和性能测定

Plastics－Unsaturated－polyester powder moulding   compounds(UP－PMCs)－Part 2：Preparation of test specimens and determination of properties

KS M ISO 14530-3-2006

塑料－不饱和－聚酯粉末模塑料（UP－PMCS）－第3部分：对所选模塑料的要求

Plastics－Unsaturated－polyester powder moulding   compounds(UP－PMCs)－Part 3：Requirements for selected moulding compounds

KS M ISO 14557-2014

消防软管.橡胶和塑料吸入软管和软管组件

Fire-fighting hoses — Rubber and plastics suction hoses   and hose assemblies

KS M ISO 14558-2017

橡胶.用红外光谱法测定氢化丁腈橡胶的残留不饱和物

Rubber — Determination of residual unsaturation of hydrogenated nitrile   butadiene rubber(HNBR) by infrared spectroscopy

KS M ISO 14596-2009

石油产品硫含量测定波长色散X射线荧光光谱法

Petroleum products－Determination of sulfur content－ Wavelength-dispersive X-ray fluorescence spectrometry

KS M ISO 14597-2003

石油产品.钒和镍含量的测定.波长色散X-射线荧光光谱法

Petroleum products－Determination of vanadium and nickel   content－Wavelength-dispersive X-ray fluorescence   spectrometry

KS M ISO 14615-2007

胶粘剂－结构胶接耐久性－载荷下的湿热暴露

Adhesives－Durability of structural adhesive joints－Exposure to humidity and temperature under load

KS M ISO 14616-2002

塑料.聚乙烯、乙烯共聚物及其混合物的热可缩薄膜.收缩应力的测定

Plastics－Heatshrinkable film of polyethylene, ethylene copolymers and their   mixtures－Determination of shrinkage stress and   contraction stress

KS M ISO 14631-2007

冲击改性聚苯乙烯（PS－I）挤出片材要求和试验方法

Extruded sheets of impact－modified polystyrene(PS－I)－Requirements and test methods

KS M ISO 14663-1-2002

塑料乙烯/乙烯醇共聚物模塑和挤塑材料第1部分：命名系统和基本规范

Plastics－Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion   materials－Part 1：Designation   system and basis for specifications

KS M ISO 14663-2-2002

塑料乙烯/乙烯醇共聚物模塑和挤塑材料第2部分：试样制备和性能测定

Plastics－Ethylene/vinyl alcohol(EVOH) copolymer moulding and extrusion   materials－Part 2：Preparation   of test specimens and determination of properties

KS M ISO 14676-2004

粘合剂.铝表面处理工艺有效性的评估.用导向托辊法作湿剥离试验

Adhesives????Evaluation of the   effectiveness of surface treatment techniques for aluminium????Wet-peel   test by floating-roller method

KS M ISO 14678-2014

粘合剂.流动阻力的测定（下垂）

Adhesives — Determination of resistance to flow(sagging)

KS M ISO 14679-2007

胶粘剂粘合性能的三点弯曲法测定

Adhesives－Measurement of adhesion characteristics by a three－point bending method

KS M ISO 14680-1-2017

色漆和清漆颜料含量的测定第1部分：离心法

Paints and varnishes－Determination of pigment content－Part 1：Centrifuge methov

KS M ISO 14680-2-2007

色漆和清漆颜料含量的测定第2部分：灰化法

Paints and varnishes－Determination of pigment content－Part 2：Ashing method

KS M ISO 14680-3-2007

色漆和清漆颜料含量的测定第3部分：过滤法

Paints and varnishes－Determination of pigment content－Part 3：Filtration method

KS M ISO 14782-2008

塑料.透明材料模糊性的测定

Plastics－Determination of haze for transparent materials

KS M ISO 14828-2016

玻璃纤维增强热固塑料（GRP）管湿条件下长期特定环形松弛刚度的测定和湿松弛系数的计算

Glass-reinforced thermosetting plastics   (GRP) pipes－ Determination of the   long-term specific ring relaxation stiffness under wet conditions and   calculation of the wet relaxation factor

KS M ISO 14848-2006

塑料.不饱和聚酯树脂.130℃时反应特性测定

Plastics－Unsaturated－polyester resins－Determination of reactivity at 130 ℃

KS M ISO 14851-2012

水介质中塑料材料最终需氧生物降解性的测定密闭式呼吸计需氧量测定法

Determination of the ultimate aerobic   biodegradability of plastic materials in an aqueous medium－Method by measuring the oxygen demand   in a closed respirometer

KS M ISO 14852-2009

水介质中塑料材料最终需氧生物降解性的测定二氧化碳析出分析法

Determination of the ultimate aerobic   biodegradability of plastic materials in an aqueous medium－Method by analysis of evolved carbon   dioxide

KS M ISO 14855-1-2013

受控堆肥条件下塑料材料最终需氧生物降解能力的测定二氧化碳释放分析法第1部分：通用方法

Determination of the ultimate aerobic   biodegradability of plastic materials under controlled composting condition ― Method by analysis of evolved carbon   dioxide ― Part 1: General method

KS M ISO 14931-2005

皮革.服装(毛皮类除外)用皮革的选择指南

Leather－Guide to the selection of leather for apparel(excluding furs)

KS M ISO 14960-1-2016

无内胎轮胎气门嘴及零部件第1部分：试验方法

Tubeless tyres ─ Valves and components ─ Part 1: Test methods

KS M ISO 14960-2-2016

无内胎轮胎气门嘴及部件第2部分：卡入式无内胎轮胎气门嘴试验方法

Tubeless tyres ─ Valves and components ─ Part 2: Clamp-in tubeless tyre valve-test methods

KS M ISO 14968-2008

纸和纸板.办公室用纸的切割尺寸.每个包装中纸页卷曲的测量

Paper and board－Cut-size office paper－Measurement of curl in a pack of sheets

KS M ISO 15013-2014

塑料.聚丙烯（PP）挤压片材.要求和试验方法

Plastics — Extruded sheets of polypropylene(PP) — Requirements and test methods

KS M ISO 150-2011

色漆和清漆用生的、精制的和熟的亚麻仁油.规范和试验方法

Raw, refined and boiled linseed oil for   paints and varnishes－Specifications   and methods of test

KS M ISO 15023-1-2006

塑料－聚乙烯醇（PVAL）材料－第1部分：命名系统和基本规范

Plastics－Poly(vinyl alcohol)(PVAL) materials－Part 1：Designation system and basis for specifications

KS M ISO 15023-2-2006

塑料聚乙烯醇材料第2部分：性能测定

Plastics－Poly(vinyl alcohol)(PVAL) materials－Part 2：Determination of properties

KS M ISO 15029-1-2003

石油和相关产品.难燃液体喷射燃烧特性的测定.第1部分:喷流燃烧持久度.空锥喷嘴法

Petroleum and related products－Determination of spray ignition   characteristics of fire－resistant fluids－Part 1: Spray flame persistence－Hollow－cone nozzle method

KS M ISO 15033-2016

塑料己内酰胺及其环低聚物和线性低聚物的高效液相色谱测定方法

Plastics－Determination of caprolactam and its cyclic and linear oligomers   by HPLC

KS M ISO 15103-2-2012

塑料聚苯醚（PPE）模塑和挤塑材料第2部分：试样制备和性能测定

Plastics－Poly(phenylene ether)(PPE) moulding and extrusion materials－Part 2：Preparation of test specimens and   determination of properties

KS M ISO 15105-1-2013

塑料.薄膜和薄板.气体传输率的测定.第1部分：压差法

Plastics — Film and sheeting —   Determination of gas-transmission rate — Part 1:   Differential-pressure method

KS M ISO 15106-1-2008

塑料薄膜和薄片水蒸气透过率的测定第1部分：湿度检测传感器法

Plastics－Film and sheeting－Determination of water   vapour transmission rate－Part 1：Humidity detection sensor method

KS M ISO 15106-2-2008

塑料薄膜和薄片水蒸气透过率的测定第2部分：红外探测传感器法

Plastics－Film and sheeting－Determination of water   vapour transmission rate－Part 2：Infrared detection sensor method

KS M ISO 15106-3-2008

塑料薄膜和薄片水蒸气透过率的测定第3部分：电解检测传感器法

Plastics－Film and sheeting－Determination of water   vapour transmission rate－Part 3：Electrolytic detection sensor method

KS M ISO 15107-2007

胶粘剂粘结接头劈裂强度的测定

Adhesives－Determination of cleavage strength of bonded joints

KS M ISO 15108-2009

胶粘剂弯曲剪切法测定粘结接头强度

Adhesives－Determination of strength of bonded joints using a   bending-shear method