KS M ISO 3386-1-2013

高聚物多孔弹性材料压缩应力应变特性的测定第1部分：低密度材料

Polymeric materials, cellular flexible－Determination of stress-strain   characteristics in compression－Part 1：Low-density materials

KS M ISO 3386-2-2013

软质泡沫聚合材料压缩应力应变特性的测定第2部分：高密度材料

Flexible cellular polymeric materials－Determination of stress-strain   characteristics in compression－Part 2：High-density materials

KS M ISO 3387-2014

橡胶.用硬度测量法测定结晶效应

Rubber — Determination of crystallization effects by hardness measurements

KS M ISO 3390-2017

主要用于铝生产的氧化铝.锰含量的测定.火焰原子吸收法

Aluminium oxide primarily used for the   production of aluminiumDetermination of manganese content-Flame atomic   absorption method

KS M ISO 3391-2017

天然和人造冰晶石.钙含量的测定.火焰原子吸收法

Cryolite, natural and   artificial-Determination of calcium contentFlame atomic absorption method

KS M ISO 3393-2017

工业用天然及人造冰晶石和氟化铝.含水量的测定.重量法

Cryolite, natural and artificial, and   aluminium fluoride for industrial use-Determination of moisture content-Gravimetric   method

KS M ISO 340-2008

输送带实验室级可燃性要求和试验方法

Conveyor belts－Laboratory scale flammability   characteristics－Requirements and test method

KS M ISO 3405-2016

石油产品.馏份特性的测定方法

Petroleum products — Determination of distillation   characteristics at atmospheric pressure

KS M ISO 34-1-2014

硫化或热塑性橡胶.撕裂强度的测定.第1部分:裤形、直角形和新月形试片

Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces

KS M ISO 3417-2012

橡胶.用摆振式圆盘硫化计测定硫化特性

Rubber－Measurement of vulcanization characteristics with the oscillating   disc curemeter

KS M ISO 34-2-2014

硫化橡胶或热塑性橡胶撕裂强度的测定第2部分：小试样

Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small(Delft) test pieces

KS M ISO 3423-2015

工业硫酸和发烟硫酸二氧化硫含量的测定碘量法

Sulphuric acid and oleums for industrial   use－Determination of   sulphur dioxide content－Iodometric method

KS M ISO 3425-2017

工业用硫磺.在850～900℃时灰分的测定和在200℃时残渣的测定

Sulphur for industrial use — Determination of ash at 850-900

KS M ISO 3426-2017

工业用硫磺.在80℃时质量损失的测定

Sulphur for industrial use — Determination of loss in mass at 80℃

KS M ISO 3429-2017

主要用于铝生产的氟化钠.铁含量的测定.1,10-菲罗啉光度法

Sodium fluoride primarily used for the   production of aluminiumDetermination of iron content-1,10-Phenanthroline photometric   method

KS M ISO 3431-2003

主要用于铝生产的氟化钠.可溶性硫酸盐含量的测定.浊度测定法

Sodium fluoride primarily used for the   production of aluminium－Determination   of soluble sulphates content－Turbidimetric method

KS M ISO 3448-2014

工业液体润滑剂.ISO粘度分级

ISO viscosity classification for industrial   liquid lubricants

KS M ISO 3451-1-2012

塑料灰分的测定第1部分：通用方法

Plastics－Determination of ash－Part 1：General methods

KS M ISO 3451-2-2007

塑料灰分的测定第2部分：聚对苯二甲酸亚烷基酯材料

Plastics－Determination of ash－Part 2：Poly(alkylene terephthalate) materials

KS M ISO 3451-3-2008

塑料灰分的测定第3部分：未增塑醋酸纤维素

Plastics－Determination of ash－Part 3：Unplasticized cellulose acetate

KS M ISO 3451-4-2008

塑料灰分的测定第4部分：聚酰胺

Plastics－Determination of ash－Part 4：Polyamides

KS M ISO 3451-5-2013

塑料.灰份的测定.第5部分：聚氯乙烯

Plastics — Determination of ash-Part 5: Poly(vinyl chloride)

KS M ISO 3458-2004

聚乙烯(PE)压力管材和管件间的装配接头.内压密封试验

Assembled joints between fittings and   polyethylene(PE) pressure pipes－Test of leakproofness under internal pressure

KS M ISO 3501-2004

聚乙烯(PE)压力管材和管件间的装配接头.抗拉拔试验

Assembled joints between fittings and   polyethylene(PE) pressure pipes－Test of resistance to pull out

KS M ISO 35-2007

天然橡胶胶乳浓缩物.机械稳定性测定

Natural rubber latex concentrate－Determination of mechanical stability

KS M ISO 3521-2010

塑料.不饱和聚酯和环氧树脂.总体积收缩率的测定

Plastics－Unsaturated polyester and epoxy resins－Determination   of overall volume shrinkage

KS M ISO 3549-2007

色漆用锌粉颜料

Zinc dust pigments for paints－Specifications and test methods

KS M ISO 3566-2003

主要用于铝生产的氟化钠.氯化物含量的测定.浊度测定法

Sodium fluoride primarily used for the   production of aluminium－Determination   of chlorides content－Turbidimetric method

KS M ISO 3582-2010

软质泡沫聚合材料小试样在小火焰下水平燃烧特性的实验室评定

Flexible cellular polymeric materials－Laboratory assessment of horizontal   burning characteristics of small specimens subjected to a small flame

KS M ISO 3597-1-2012

纺织玻璃纤维增强塑料无捻粗纱增强树脂棒力学性能的测定第1部分：棒的一般考虑和制备

Textile-glass-reinforced plastics－Determination of mechanical   properties on rods made of roving-reinforced resin－Part   1：General considerations and preparation of rods

KS M ISO 3597-2-2012

纺织玻璃钢无捻粗纱增强树脂棒力学性能的测定第2部分：弯曲强度的测定

Textile-glass-reinforced plastics－Determination of mechanical properties   on rods made of roving-reinforced resin－Part 2：Determination of flexural strength

KS M ISO 3597-3-2012

纺织玻璃钢无捻粗纱增强树脂棒力学性能的测定第3部分：抗压强度的测定

Textile-glass-reinforced plastics－Determination of mechanical   properties on rods made of roving-reinforced resin－Part   3：Determination of compressive strength

KS M ISO 3597-4-2012

纺织玻璃纤维增强塑料无捻粗纱增强树脂棒力学性能的测定第4部分：表观层间剪切强度的测定

Textile-glass-reinforced plastics－Determination of mechanical   properties on rods made of roving-reinforced resin－Part   4：Determination of apparent interlaminar shear   strength

KS M ISO 3617-2002

摄影.冲洗用化学品.氢氧化钠规范

Photography－Processing chemicals－Specification   for sodium hydroxide

KS M ISO 3618-2002

摄影.冲洗用化学品.苯并三唑规范

Photography－Processing chemicals－Specification   for benzotriazole

KS M ISO 3619-2002

摄影.冲洗用化学品.硫代硫酸铵溶液规范

Photography－Processing chemicals－Specifications   for ammonium thiosulfate solution

KS M ISO 36-2014

硫化橡胶或热塑性橡胶与织物粘合强度的测定

Rubber, vulcanized or thermoplastic — Determination of adhesion to textile   fabric

KS M ISO 3621-2002

摄影.冲洗用化学品.十水合四硼酸钠规范

Photography－Processing chemicals－Specification   for sodium tetraborate decahydrate

KS M ISO 3622-2002

摄影.冲洗用化学品.硫氰酸铵规范

Photography－Processing chemicals－Specification   for ammonium thiocyanate

KS M ISO 3623-2002

摄影.冲洗用化学品.无水碳酸钾规范

Photography－Processing chemicals－Specification   for anhydrous potassium carbonate

KS M ISO 3624-2002

摄影.冲洗用化学品.铁氰化钾规范

Photography－Processing chemicals－Specification   for potassium ferricyanide

KS M ISO 3625-2002

摄影.冲洗用化学品.氢氧化钾规范

Photography－Processing chemicals－Specification   for potassium hydroxide

KS M ISO 3626-2002

摄影.冲洗用化学品.硫氰酸钾规范

Photography－Processing chemicals－Specification   for potassium thiocyanate

KS M ISO 3627-2002

摄影.冲洗用化学品.无水焦亚硫酸钠规范

Photography－Processing chemicals－Specifications   for anhydrous sodium metabisulfite

KS M ISO 3628-2004

摄影.冲洗用化学品.粒状硼酸规范

Photography－Processing chemicals－Specifications   for boric acid, granular

KS M ISO 3629-2002

摄影.冲洗用化学品.焦亚硫酸钾规范

Photography－Processing chemicals－Specifications   for potassium metabisulfite

KS M ISO 3633-2012

建筑内污、废水排放（低温、高温）塑料管道系统未增塑聚氯乙烯（PVC-U）

Plastics piping systems for soil and waste   discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride)   (PVC-U)

KS M ISO 3648-2011

航空燃料净比能测定法

Aviation fuels－Estimation of net specific energy

KS M ISO 3668-2007

色漆和清漆.色漆颜色的目视比色

Paints and varnishes－Visual comparison of the colour of   paints

KS M ISO 3672-1-2007

塑料不饱和聚酯树脂（UP－R）－第1部分：命名体系

Plastics－Unsaturated－polyester resins(UP－R)－Part 1：Designation   system

KS M ISO 3672-2-2007

塑料不饱和聚酯树脂（UP－R）－第2部分：试样制备和性能测定

Plastics－Unsaturated-polyester resins(UP－R)－Part 2：Preparation of test specimens and   determination of properties

KS M ISO 3673-1-2007

塑料环氧树脂第1部分：命名

Plastics－Epoxy resins－Part 1：Designation

KS M ISO 3673-2-2013

塑料.环氧树脂.第2部分：样品制备和性能测定

Plastics — Epoxy resins-Part 2: Preparation of specimens and   determination of properties

KS M ISO 3675-2017

原油和液体石油产品密度的实验室测定液体比重计法

Crude and liquid petroleum products － Laboratory determination of density － Hydrometer method

KS M ISO 3679-2003

色漆、清漆、石油及有关产品.闪点的测定.快速平衡法

Paints, varnishes, petroleum and related   products－Determination of   flashpoint－Rapid equilibrium method

KS M ISO 3680-2008

色漆、清漆、石油及有关产品.闪点/非闪点的测定.快速平衡闭杯法

Paints, varnishes, petroleum and related   products－Flash/no flash test－Rapid equilibrium method

KS M ISO 3681-2017

色漆和清漆用粘合剂.皂化值的测定.滴定法

Binders for paints and varnishes－Determination of saponification value－Titrimetric method

KS M ISO 3688-2017

纸浆.蓝光漫反射因数(ISO亮度)实验室测量用纸页的制备

Pulps — Preparation of laboratory sheets for the measurement of diffuse   blue reflectance factor (ISO brightness)

KS M ISO 3689-2017

纸和纸板.浸水后耐破强度的测定

Paper and board — Determination of bursting strength   after immersion in water

KS M ISO 3696-2010

分析实验室用水规范和试验方法

Water for analytical laboratory use－Specification and test methods

KS M ISO 3699-2003

工业用无水氟化氢.水含量的测定.卡尔-费休(KarlFischer)法

Anhydrous hydrogen fluoride for industrial   use－Determination of water   content－Karl Fischer method

KS M ISO 3705-2017

工业用硫磺.砷含量的测定.二乙基二硫代氨基甲酸银光度法

Sulphur for industrial use — Determination of arsenic content — Silver diethyldithiocarbamate photometric method

KS M ISO 3706-2017

工业(包括食品工业)用磷酸.氧化磷(V)总含量的测定.磷钼酸喹啉重量法

Phosphoric acid for industrial   use(including foodstuffs) — Determination of total phosphorus(V) oxide content — Quinoline phosphomolybdate gravimetric method

KS M ISO 3711-2013

铬酸铅颜料和铬酸盐钼酸盐颜料规范和试验方法

Lead chromate pigments and chromate — molybdate pigments — Specifications and methods of test

KS M ISO 37-2007

硫化橡胶或热塑橡胶.撕裂强度的测定

Rubber, vulcanized or thermoplastic－Determination of tensile stress－strain properties

KS M ISO 3733-2008

石油产品和沥青材料.水分的测定.蒸馏法

Petroleum products and bituminous materials－Determination of water－Distillation method

KS M ISO 3734-2011

石油产品残油中水和沉积物的测定离心法

Petroleum products－Determination of water and sediment   in residual fuel oils－Centrifuge method

KS M ISO 3735-2008

原油和燃料油.沉积物的测定.抽取法

Crude petroleum and fuel oils－Determination of sediment－Extraction method

KS M ISO 3739-1-2009

工业用轮胎和轮辋.第1部分：5°锥形或平底轮辋的充气轮胎（米制系列）.名称、尺寸和标记

Industrial tyres and rims－Part 1：Pneumatic   tyres(metric series) on 5° tapered or flat base rims－Designation, dimensions and marking

KS M ISO 3739-2-2007

工业用轮胎和轮辋.第2部分：5°锥形或平底轮辋的充气轮胎（米制系列）.额定载荷

Industrial tyres and rims－Part 2：Pneumatic   tyres(metric series) on 5° tapered or flat base rims－Load ratings

KS M ISO 3739-3-2012

工业轮胎和轮辋第3部分：轮辋

Industrial tyres and rims－Part 3：Rims

KS M ISO 3771-2012

石油产品碱值测定高氯酸电位滴定法

Petroleum products－Determination of base number－Perchloric acid potentiometric titration method

KS M ISO 3781-2017

纸和纸板.浸水后抗张强度的测定

Paper and board－Determination of tensile strength   after immersion in water

KS M ISO 3783-2008

纸和纸板耐剥性的测定IGT型试验机加速法（电模型）

Paper and board－Determination of resistance to   picking－Accelerated speed method using the IGT-type   tester(electric model)

KS M ISO 3810-2004

集成软木地砖.试验方法

Floor tiles of agglomerated cork－Test methods

KS M ISO 3813-2004

弹性地板覆盖物.软木地板砖.规范

Resilient floor coverings－Cork floor tiles－Specification

KS M ISO 3837-2003

液体石油产品烃类测定荧光指示剂吸附法

Liquid petroleum products－Determination of hydrocarbon types－Fluorescent indicator adsorption method

KS M ISO 3838-2011

原油和液体或固体石油产品密度或相对密度的测定毛细管停止式比重瓶和带刻度双毛细管比重瓶法

Crude petroleum and liquid or solid   petroleum products－Determination   of density or relative density－Capillary-stopped   pyknometer and graduated bicapillary pyknometer methods

KS M ISO 3856-1-2017

色漆和清漆“可溶性”金属含量的测定第1部分：铅含量的测定火焰原子吸收光谱法和双硫腙分光光度法

Paints and varnishes－Determination of “soluble” metal content－Part 1：Determination of lead content－Flame atomic absorption spectrometric method and dithizone   spectrophotometric method

KS M ISO 3856-2-2017

色漆和清漆“可溶性”金属含量的测定第2部分：锑含量的测定火焰原子吸收光谱法和罗丹明B分光光度法

Paints and varnishes－Determination of “soluble” metal content－Part 2：Determination of antimony content－Flame atomic absorption spectrometric method and Rhodamine B   spectrophotometric method

KS M ISO 3856-3-2007

色漆和清漆“可溶性”金属含量的测定第3部分：钡含量的测定火焰原子发射光谱法

Paints and varnishes－Determination of “soluble” metal content－Part 3：Determination of barium content－Flame atomic emission spectrometric method

KS M ISO 3856-4-2007

色漆和清漆“可溶性”金属含量的测定第4部分：镉含量的测定火焰原子吸收光谱法和极谱法

Paints and varnishes－Determination of “soluble” metal content－Part 4：Determination of cadmium content－Flame atomic absorption spectrometric method and polarographic   method

KS M ISO 3856-5-2017

色漆和清漆“可溶性”金属含量的测定第5部分：液体色漆或粉末状色漆中颜料部分六价铬含量的测定二苯卡巴肼分光光度法

Paints and varnishes－Determination of “soluble” metal content－Part 5：Determination of hexavalent   chromium content of the pigment portion of the liquid paint or the paint in   powder form－Diphenylcarbazide spectrophotometric   method

KS M ISO 3856-6-2007

色漆和清漆“可溶性”金属含量的测定第6部分：色漆液体部分总铬含量的测定火焰原子吸收光谱法

Paints and varnishes－Determination of “soluble” metal content－Part 6：Determination of total chromium   content of the liquid portion of the paint－Flame   atomic absorption spectrometric method

KS M ISO 3856-7-2007

色漆和清漆“可溶性”金属含量的测定第7部分：色漆颜料部分和水溶性色漆液体中汞含量的测定无焰原子吸收光谱法

Paints and varnishes－Determination of “soluble” metal content－Part 7：Determination of mercury content of   the pigment portion of the paint and of the liquid of water-dilutable paints－Flameless atomic absorption spectrometric method

KS M ISO 3858-2014

橡胶配方配合剂.炭黑.甲苯萃取物透光率的测定

Rubber compounding ingredients — Carbon black — Determination of light transmittance of toluene extract

KS M ISO 3861-2012

喷砂用橡胶软管规范

Rubber hoses for sand and grit blasting－Specification

KS M ISO 3862-2012

橡胶软管和软管组合件油基或水基流体用橡胶包覆螺旋钢丝增强液压型规范

Rubber hoses and hose assemblies－Rubber-covered spiral-wire-reinforced   hydraulic types for oil-based or water-based fluids－Specification

KS M ISO 3863-2004

圆柱形软木塞.尺寸、取样、包装和标记

Cylindrical cork stoppers－Dimensional characteristics,   sampling, packaging and marking

KS M ISO 3865-2010

硫化或热塑性橡胶.接触有机材料污染的试验方法

Rubber, vulcanized or thermoplastic－Methods of test for staining in   contact with organic material

KS M ISO 3867-2004

复合软木.膨胀连接填料.试验方法

Composition cork－Expansion joint fillers－Test methods

KS M ISO 3869-2004

复合软木.膨胀连接填充料.规范、包装和标记

Composition cork－Expansion joint fillers－Specifications, packaging and marking

KS M ISO 3877-1-2007

轮胎、气门嘴和内胎等义术语表第1部分：轮胎

Tyres, valves and tubes－List of equivalent terms－Part 1：Tyres

KS M ISO 3877-2-2007

轮胎、气门嘴及内胎等义术语表第2部分：轮胎气门嘴

Tyres, valves and tubes－List of equivalent terms－Part 2：Tyre valves

KS M ISO 3877-3-2002

轮胎、气门嘴和内胎.等义术语表.第3部分：内胎

Tyres, valves and tubes — List of equivalent terms — Part 3: Tubes

KS M ISO 3877-4-2007

轮胎、气门嘴和内胎等义术语表第4部分：实心轮胎

Tyres, valves and tubes－List of equivalent terms－Part 4：Solid tyres

KS M ISO 3899-2009

橡胶.丁腈胶乳.残余丙烯腈含量的测定

Rubber－Nitrile latex－Determination of residual   acrylonitrile content

KS M ISO 3900-2009

橡胶.丁腈胶乳.结合丙烯腈含量的测定

Rubber－Nitrile latex－Determination of bound   acrylonitrile content

KS M ISO 3915-2002

塑料.导电塑料电阻率的测量

Plastics－Measurement of resistivity of conductive plastics

KS M ISO 3924-2017

石油产品.馏程的测定.气相色谱法

Petroleum products — Determination of boiling range   distribution— Gas chromatography method

KS M ISO 3934-2008

建筑用硫化和热塑性预成型橡胶垫片分类、规范和试验方法

Rubber, vulcanized and thermoplastic－Preformed gaskets used in buildings－Classification, specifications and test methods

KS M ISO 3943-2002

摄影冲洗用化学品.无水乙酸钠规范

Photography－Processing chemicals－Specification   for anhydrous sodium acetate

KS M ISO 3987-2012

石油产品润滑油和添加剂中硫酸化灰分的测定

Petroleum products－Determination of sulfated ash in   lubricating oils and additives

KS M ISO 3993-2003

液化石油气和轻质烃类.密度或相对密度的测定.压力比重计法

Liquefied petroleum products gas and light   hydrocarbons－Determination of   density or relative density－Pressure hydrometer   method

KS M ISO 3996-2007

道路车辆.使用非石油基制动液的液压制动系统软管组件

Road vehicles－Brake hose assemblies for hydraulic braking systems   used with non-petroleum-base brake fluid

KS M ISO 4000-1-2017

轿车轮胎和轮辋第1部分：轮胎（米制系列）

Passenger car tyres and rims－Part 1：Tyres(metric   series)

KS M ISO 4000-2-2017

轿车轮胎和轮辋第2部分：轮辋

Passenger car tyres and rims－Part 2：Rims

KS M ISO 4023-2003

蒸汽胶管.试验方法

Rubber hoses for steam－Test methods

KS M ISO 4044-2017

皮革.化学试验样品的制备

Leather — Chemical tests — Preparation of chemical   test samples

KS M ISO 4045-2013

皮革.pH值的测定

Leather ㅡ   Chemical tests ㅡ Determination of pH

KS M ISO 4046-1-2009

纸、纸板、纸浆及其术语词汇第1部分：字母索引

Paper, board, pulps and related terms－Vocabulary－Part   1：Alphabetical index

KS M ISO 4046-2-2004

纸、纸板、纸浆及其术语词汇第2部分：制浆术语

Paper, board, pulps and related terms－Vocabulary－Part   2：Pulping terminology

KS M ISO 4046-3-2004

纸、纸板、纸浆及其术语词汇第3部分：造纸术语

Paper, board, pulps and related terms－Vocabulary－Part   3：Paper-making terminology

KS M ISO 4046-4-2004

纸、纸板、纸浆及其术语词汇第4部分：纸和纸板的等级及加工产品

Paper, board, pulps and terms－Vocabulary－Part   4：Paper and board grades and converted products

KS M ISO 4046-5-2004

纸、纸板、纸浆及其术语词汇第5部分：纸浆、纸和纸板的性能

Paper, board, pulps and related terms－Vocabulary－Part   5：Properties of pulp, paper and board

KS M ISO 4047-2007

皮革.硫酸盐总灰分和硫酸盐水不溶物灰分的测定

Leather－Determination of sulphated total ash and sulphated water-insoluble   ash

KS M ISO 4048-2007

皮革.二氯甲烷萃取物的测定

Leather－Determination of matter soluble in dichloromethane

KS M ISO 4065-2008

热塑性塑料管材.通用壁厚表

Thermoplastics pipes－Universal wall thickness table

KS M ISO 4074-2013

天然胶乳橡胶避孕套.技术要求和试验方法

Natural latex rubber condoms ― Requirements and test methods

KS M ISO 4079-2017

橡胶软管和软管组件.油基或水基流体用织物增强液压型.规范

Rubber hoses and hose assemblies — Textile-reinforced hydraulic types   for oil-based or water-based fluids — Specification

KS M ISO 4080-2008

橡胶和塑料软管和软管组件.漏气率的测定

Rubber and plastics hoses and hose   assemblies－Determination of   permeability to gas

KS M ISO 4081-2008

内燃机冷却系统用橡胶软管和管规范

Rubber hoses and tubing for cooling systems   for internal-combustion engines－Specification

KS M ISO 4094-2016

纸、纸板和纸浆.试验装置的国际校准.标准化和授权实验室的指定和验收

Paper, board and pulps - International   calibration of testing apparatus－Nomination and acceptance of standardizing and authorized   laboratories

KS M ISO 4097-2009

乙烯－丙烯－二烯烃橡胶（EPDM）评价方法

Rubber, ethylene-propylene-diene(EPDM)－Evaluation procedure

KS M ISO 4098-2007

皮革化学试验水溶物、水溶性无机物和水溶性有机物的测定

Leather－Chemical tests－Determination of   water-soluble matter, water-soluble inorganic matter and water-soluble   organic matter

KS M ISO 4119-2016

纸浆.浆料浓度的测定

Pulps－Determination of stock concentration

KS M ISO 4132-2005

承压管用硬聚氯乙烯(PVC)和金属的接头管件安装长度和螺纹尺寸.公制系列

Unplasticized polyvinyl chloride(PVC－U) and metal adapter fittings for   pipes under pressure－Laying lengths and size of   threads－Metric series

KS M ISO 418-2002

摄影冲洗用亚硫酸钠

Photography－Processing chemicals－Specifications   for anhydrous sodium sulfite

KS M ISO 4184-2002

带传动.标准的和窄V带.标准长度系列

Belt drives－Classical and narrow V－belts－Lengths in datum system

KS M ISO 4198-2014

表面活性剂.手洗餐具用洗涤剂.性能比较试验指南

Surface active agents — Detergents for hand dishwashing — Guide for comparative testing of performance

KS M ISO 420-2002

摄影用溴化钾

Photography－Processing chemicals－Specifications   for potassium bromide

KS M ISO 4209-1-2007

载重汽车轮胎和轮辋（米制系列）－第1部分：轮胎

Truck and bus tyres and rims(metric series)－Part 1：Tyres

KS M ISO 4209-2-2002

载重汽车轮胎和轮辋（米制系列）－第2部分：轮辋

Truck and bus tyres and rims(metric series)－Part 2：Rims

KS M ISO 422-2002

摄影用甲基对氨基苯酚硫酸盐

Photography－Processing chemicals－Specifications   for p -methylaminophenol sulfate

KS M ISO 4223-1-2009

轮胎工业中某些术语的定义第1部分：充气轮胎

Definitions of some terms used in the tyre   industry－Part 1：Pneumatic tyres

KS M ISO 4223-2-2007

轮胎工业某些术语的定义第2部分：实心轮胎

Definitions of some terms used in the tyre   industry－Part 2：Solid tyres

KS M ISO 424-2002

摄影用无水碳酸钠和一水合碳酸钠

Photography－Processing chemicals－Specifications   for anhydrous sodium carbonate and sodium carbonate monohydrate

KS M ISO 4249-1-2010

摩托车轮胎和轮辋（代号系列）－第1部分：轮胎

Motorcycle tyres and rims(Code designated   series)－Part 1：Tyres

KS M ISO 4249-2-2005

摩托车轮胎和轮辋（代号系列）－第2部分：轮胎额定载荷

Motorcycle tyres and rims(Code-designated   series)－Part 2：Tyre load ratings

KS M ISO 4249-3-2015

摩托车轮胎和轮辋（代号系列）－第3部分：轮辋

Motorcycle tyres and rims(Code-designated   series)－Part 3：Rims

KS M ISO 4250-1-2015

工程机械轮胎和轮辋第1部分：轮胎的名称与尺寸

Earth-mover tyres and rims－Part 1：Tyre   designation and dimensions

KS M ISO 4250-2-2015

工程机械轮胎和轮辋第2部分：载荷和充气压力

Earth-mover tyres and rims－Part 2：Loads   and inflation pressures

KS M ISO 4250-3-2012

工程机械轮胎和轮辋第3部分：轮辋

Earth-mover tyres and rims－Part 3：Rims

KS M ISO 4251-1-2016

农业拖拉机和机械用轮胎（帘布层数和标记系列）和轮辋.第1部分：轮胎的名称、尺寸和认可的轮辋轮廓

Tyres(ply rating marked series) and rims   for agricultural tractors and machines－Part 1：Tyre designation and dimensions,   and approved rim contours

KS M ISO 4251-2-2016

农业拖拉机和机械用轮胎（帘布层数和标记系列）和轮辋第2部分：轮胎额定载荷

Tyres(ply rating marked series) and rims   for agricultural tractors and machines－Part 2：Tyre load ratings

KS M ISO 4251-3-2016

农业拖拉机和机械用轮胎（帘布层数和标记系列）和轮辋第3部分：轮辋

Tyres(ply rating marked series) and rims   for agricultural tractors and machines－Part 3：Rims

KS M ISO 4251-4-2016

农业拖拉机和机械用轮胎（帘布层数和标记系列）和轮辋第4部分：轮胎分类和命名

Tyres(ply rating marked series) and rims   for agricultural tractors and machines－Part 4：Tyre classification and   nomenclature

KS M ISO 4251-5-2016

农业拖拉机和机械用轮胎（帘布层数和标记系列）和轮辋第5部分：集材机轮胎

Tyres(ply rating marked series) and rims   for agricultural tractors and machines－Part 5：Log skidder tyres

KS M ISO 4256-2008

液化石油气.蒸气压的测定.LPG法

Liquefied petroleum gases－Determination of gauge vapour   pressure－LPG method

KS M ISO 4257-2011

液化石油气取样方法

Liquefied petroleum gases－Method of sampling

KS M ISO 4259-2009

石油产品试验方法精密度数据的测定和应用

Petroleum products－Determination and application of   precision data in relation to methods of test

KS M ISO 4260-2003

石油产品和烃类.硫含量的测定.威克波耳德(Wickbold)燃烧法

Petroleum products and hydrocarbons－Determination of sulfur content－Wickbold combustion method

KS M ISO 4262-2008

石油产品.残碳的测定.兰姆斯波特姆(Ramsbottom)法

Petroleum products－Determination of carbon residue－Ramsbottom method

KS M ISO 4263-1-2004

石油及相关产品防腐蚀油和液体老化性能的测定TOST试验第1部分：矿物油程序

Petroleum and related products－Determination of the ageing behaviour   of inhibited oils and fluids－TOST test－Part 1：Procedure for mineral oils

KS M ISO 4263-2-2004

石油及相关产品防腐蚀油和液体老化性能的测定TOST试验第2部分：HFC类液压液的程序

Petroleum and related products－Determination of the ageing behaviour   of inhibited oils and fluids－TOST test－Part 2：Procedure for category HFC   hydraulic fluids

KS M ISO 4263-3-2017

石油及相关产品.用TOST试验测定防腐蚀油和液体的老化性能.第3部分：合成液压液的无水程序

Petroleum and related products－Determination of the ageing behavior   of inhibited oils and fluids using TOST test－Part 3：Anhydrous procedure for synthetic hydraulic fluids

KS M ISO 4263-4-2007

石油及相关产品防腐蚀油和液体老化性能的测定TOST试验第4部分：工业齿轮油规程

Petroleum and related products－Determination of the ageing behaviour   of inhibited oils and fluids－TOST test－Part 4：Procedure for industrial gear oils

KS M ISO 4264-2014

石油产品中间馏分燃料十六烷指数的四变量计算法

Petroleum products－Calculation of cetane index of   middle-distillate fuels by the four-variable equation

KS M ISO 4266-1-2003

石油和液态石油产品储罐内液位和温度的自动测量第1部分：常压罐内液位的测量

Petroleum and liquid petroleum products－Measurement of level and temperature   in storage tanks by automatic methods－Part 1：Measurement of level in atmospheric tanks

KS M ISO 4266-2-2003

石油和液态石油产品储罐内液位和温度自动测量第2部分：船用容器液位测量

Petroleum and liquid petroleum products－Measurement of level and temperature   in storage tanks by automatic methods－Part 2：Measurement of level in marine vessels

KS M ISO 4266-3-2003

石油和液态石油产品储罐内液位和温度的自动测量第3部分：加压储罐（非制冷）液位的测量

Petroleum and liquid petroleum products－Measurement of level and temperature   in storage tanks by automatic methods－Part 3：Measurement of level in pressurized storage tanks(non－refrigerated)

KS M ISO 4266-4-2003

石油和液态石油产品储罐液位和温度自动测量第4部分：常压储罐温度测量

Petroleum and liquid petroleum products－Measurement of level and temperature   in storage tanks by automatic methods－Part 4：Measurement of temperature in atmospheric tanks

KS M ISO 4266-5-2003

石油和液态石油产品储罐液位和温度自动测量第5部分：船用容器温度测量

Petroleum and liquid petroleum products－Measurement of level and temperature   in storage tanks by automatic methods－Part 5：Measurement of temperature in marine vessels

KS M ISO 4266-6-2003

石油和液态石油产品储罐内液位和温度的自动测量第6部分：加压储罐（非制冷）温度的测量

Petroleum and liquid petroleum products－Measurement of level and temperature   in storage tanks by automatic methods－Part 6：Measurement of temperature in pressurized storage   tanks(non-refrigerated)

KS M ISO 4267-2-2003

石油和液体石油产品.油量的计算.第2部分：动态测量

Petroleum and liquid petroleum products－Calculation of oil quantities－Part 2：Dynamic measurement

KS M ISO 4269-2014

石油和液态石油产品.用液体测量法进行油罐校准.使用容积式流量计的增量法

Petroleum and liquid petroleum products — Tank calibration by liquid   measurement — Incremental method using volumetric   meters

KS M ISO 4280-2003

工业用天然及人造冰晶石和氟化铝.硫酸盐含量的测定.硫酸钡重量法

Cryolite, natural and artificial, and   aluminium fluoride for industrial use－Determination of sulphate content－Barium   sulphate gravimetric method

KS M ISO 4281-2015

工业用六氟硅酸钠游离酸度和六氟硅酸总量的测定滴定法

Sodium hexafluorosilicate for industrial   use－Determination of free   acidity and total hexafluorosilicate content－Titrimetric   method

KS M ISO 4311-2003

阴离子和非离子表面活性剂.临界胶束浓度的测定.用平板、镫形环或圆环测定表面张力的方法

Anionic and non-ionic surface active agents－Determination of the critical   micellization concentration－Method by measuring   surface tension with a plate, stirrup or ring

KS M ISO 4312-2003

表面活性剂某些洗涤效果的评价未上油的棉对照布的分析和试验方法

Surface active agents－Evaluation of certain effects of   laundering－Methods of analysis and test for unsoiled   cotton control cloth

KS M ISO 4313-2003

洗衣粉.总氧化磷(V)含量的测定.磷钼酸喹啉重量法

Washing powders－Determination of total phosphorus(V)   oxide content－Quinoline phosphomolybdate gravimetric method

KS M ISO 4314-2003

表面活性剂.游离碱度或游离酸度的测定.滴定法

Surface active agents－Determination of free alkalinity or   free acidity－Titrimetric method

KS M ISO 4315-2003

表面活性剂.碱度的测定.滴定法

Surface active agents－Determination of alkalinity－Titrimetric method

KS M ISO 4316-2004

表面活性剂.水溶液pH值的测定.电位差法

Surface active agents－Determination of pH of aqueous   solutions－Potentiometric method

KS M ISO 4317-2004

表面活性剂和洗涤剂.含水量的测定.卡尔·费休(KarlFischer)法

Surface-active agents and detergents－Determination of water content－Karl Fischer method

KS M ISO 4318-2007

表面活性剂和肥皂.含水量的测定.共沸蒸馏法

Surface active agents and soaps－Determination of water content－Azeotropic distillation method

KS M ISO 4319-2007

表面活性剂.洗织物用洗涤剂.性能比较试验指南

Surface active agents－Detergents for washing fabrics－Guide for comparative testing of performance

KS M ISO 4320-2003

非离子表面活性剂.浊点指数的测定.容量法

Non-ionic surface active agents－Determination of cloud point index－Volumetric method

KS M ISO 4321-2003

洗衣粉活性氧含量的测定滴定法

Washing powders－Determination of active oxygen   content－Titrimetric method

KS M ISO 4322-2003

非离子表面活性剂.硫酸化灰分的测定.重量法

Non-ionic surface active agents－Determination of sulphated ash－Gravimetric method

KS M ISO 4323-2003

肥皂.氯化物含量的测定.电位差法

Soaps－Determination of chloride content－Potentiometric   method

KS M ISO 4325-2003

肥皂和洗涤剂.螯合剂含量的测定.滴定法

Soaps and detergents－Determination of chelating agent   content－Titrimetric method

KS M ISO 4326-2008

非离子表面活性剂.聚乙氧基化衍生物羟值的测定.乙酐法

Non-ionic surface active agents－Polyethoxylated derivatives－Determination of hydroxyl value－Acetic   anhydride method

KS M ISO 4327-2003

非离子表面活性剂聚烷氧基化衍生物羟值的测定邻苯二甲酸酐法

Non-ionic surface active   agents-Polyalkoxylated derivatives －Determination of hydroxyl value-Phthalic anhydride method

KS M ISO 4404-1-2013

石油和相关产品.耐火液压液耐腐蚀性的测定.第1部分：含水液体

Petroleum and related products — Determination of the corrosion   resistance of fire-resistant hydraulic fluids — Part   1: Water-containing fluids

KS M ISO 4404-2-2012

石油及相关产品耐火液压液耐腐蚀性测定第2部分：非水流体

Petroleum and related products－Determination of the corrosion   resistance of fire-resistant hydraulic fluids－Part 2：Non-aqueous fluids

KS M ISO 4435-2008

埋地排水系统用未增塑聚氯乙烯（PVC-U）管及配件规范

Unplasticized poly(vinyl chloride)(PVC-U)   pipes and fittings for buried drainage and sewerage systems－Specifications

KS M ISO 4512-2003

石油和液态石油产品.储油罐中液位的测量设备.人工法

Petroleum and liquid petroleum products－Equipment for measurement of liquid   levels in storage tanks－Manual methods

KS M ISO 456-2007

表面活性剂.肥皂的分析.游离苛性碱的测定

Surface active agents－Analysis of soaps－Determination of free caustic alkali

KS M ISO 457-2003

肥皂.氯化物含量的测定.滴定法

Soaps－Determination of chloride content－Titrimetric   method

KS M ISO 4578-2009

粘合剂.高强度粘合体抗剥离性的测定.摆动辊法

Adhesives－Determination of peel resistance of high-strength   adhesive bonds－Floating-roller method

KS M ISO 458-1

塑料柔性材料扭转刚度的测定第1部分：通用方法

Plastics－Determination of stiffness in torsion of flexible materials－Part 1：General method

KS M ISO 4581-2016

塑料苯乙烯/丙烯腈共聚物残留丙烯腈单体含量的测定气相色谱法

Plastics - Styrene/acrylonitrile copolymers－Determination of residual   acrylonitrile monomer content－Gas chromatography   method

KS M ISO 458-2

塑料柔性材料扭转刚度的测定第2部分：氯乙烯均聚物和共聚物增塑化合物的应用

Plastics－Determination of stiffness in torsion of flexible materials－Part 2：Application to plasticized   compounds of homopolymers and copolymers of vinyl chloride

KS M ISO 4582-2012

塑料在玻璃、自然风化或实验室光源下曝晒后颜色变化和性能变化的测定

Plastics－Determination of changes in colour and variations in properties   after exposure to daylight under glass, natural weathering or laboratory   light sources

KS M ISO 4586-1-2012

高压装饰层压板热固性树脂板第1部分：分类和规范

High-pressure decorative laminates－Sheets made from thermosetting resins－Part 1：Classification and specifications

KS M ISO 4586-2-2013

高压装饰层压板热固树脂制薄板第2部分：性能测定

High-pressure decorative laminates — Sheets made from thermosetting   resins — Part 2: Determination of properties

KS M ISO 4587-2016

胶粘剂刚性与刚性连接件拉伸搭接剪切强度的测定

Adhesives－Determination of tensile lap-shear strength of   rigid-to-rigid bonded assemblies

KS M ISO 4589-1-2002

塑料氧指数燃烧性能的测定第1部分：指南

Plastics－Determination of burning behaviour by oxygen index－Part 1：Guidance

KS M ISO 4589-2-2016

塑料氧指数燃烧性能的测定第2部分：室温试验

Plastics－Determination of burning behaviour by oxygen index－Part 2：Ambient-temperature test

KS M ISO 4589-3-2002

塑料氧指数燃烧性能的测定第3部分：高温试验

Plastics－Determination of burning behaviour by oxygen index－Part 3：Elevated－temperature   test

KS M ISO 4590-2010

硬质泡沫塑料开孔和闭孔体积百分比的测定

Rigid cellular plastics－Determination of the volume   percentage of open cells and of closed cells

KS M ISO 4591-2007

塑料.薄膜和薄片.用重量法（重量厚度）测定样品的平均厚度和成卷的平均厚度与面积系数

Plastics－Film and sheeting－Determiantion of average   thickness of a sample, and average thickness and yield of a roll,by   gravimetric techniques(gravimetric thickness)

KS M ISO 4592-2007

塑料.薄膜和薄片.长度和宽度的测定

Plastics－Film and sheeting－Determination of length   and width

KS M ISO 4593-2002

塑料.薄膜和薄片.机械扫描测定厚度

Plastics－Film and sheeting－Determination of   thickness by mechanical scanning

KS M ISO 4597-1-2014

塑料.环氧树脂用硬质合金和催速剂.第1部分：名称与符号

Plastics — Hardners and accelerators for epoxy resins — Part 1: Designation

KS M ISO 4611-2012

塑料湿热、水溅和盐雾效应的测定

Plastics－Determination of the effects of exposure to damp heat, water spray   and salt mist

KS M ISO 4613-1-2016

塑料.醋酸乙烯/乙烯酯（E/VAC）模塑和挤塑材料.第1部分：名称与符号和规范

Plastics - Ethylene/vinyl acetate(E/VAC)   moulding and extrusion materials - Part 1 : Designation and specification

KS M ISO 4613-2-2016

塑料乙酸乙烯/乙烯酯（E/VAC）模塑和挤塑材料第2部分：试样制备和性能测定

Plastics－Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials－Part 2：Preparation of test specimens and   determination of properties

KS M ISO 4614-2010

塑料.三聚氰胺-甲醛模塑件.可萃取的甲醛的测定

Plastics－Melamine-formaldehyde mouldings－Determination   of extractable formaldehyde

KS M ISO 4615-2010

塑料不饱和聚酯和环氧树脂总氯含量的测定

Plastics－Unsaturated polyesters and epoxide resins－Determination   of total chlorine content

KS M ISO 4618-2016

色漆和清漆术语和定义

Paints and varnishes－Terms and definitions

KS M ISO 4619-2013

色漆和清漆用干燥剂

Driers for paints and varnishes

KS M ISO 4620-2007

镉颜料

Cadmium pigments－Specifications and methods of test

KS M ISO 4621-2007

氧化铬绿颜料.规格和试验方法

Chrome oxide green pigments－Specifications and methods of test

KS M ISO 4623-1-2017

色漆和清漆丝状腐蚀抗性的测定第1部分：钢基体

Paints and varnishes－Determination of resistance to   filiform corrosion－Part 1：Steel   substrates

KS M ISO 4623-2-2006

色漆和清漆耐丝状腐蚀性的测定第2部分：铝基体

Paints and varnishes－Determination of resistance to   filiform corrosion－Part 2：Aluminium   substrates

KS M ISO 4624-2017

色漆和清漆粘附力的拉拔试验

Paints and varnishes－Pull-off test for adhesion

KS M ISO 4625-1-2016

色漆和清漆用粘合剂软化点的测定第1部分：环球法

Binders for paints and varnishes－Determination of softening point－Part 1：Ring-and-ball method

KS M ISO 4625-2-2011

色漆和清漆用粘合剂软化点的测定第2部分：杯球法

Binders for paints and varnishes－Determination of softening point－Part 2：Cup-and-ball method

KS M ISO 4626-2002

挥发性有机液体.用作原料的有机溶剂沸程的测定

Volatile organic liquid－Determination of boiling range of   organic solvents used as raw material

KS M ISO 4628-1-2017

色漆和清漆涂层降解性的评定缺陷量值、大小和外观均匀变化强度的规定第1部分：一般介绍和命名体系

Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of   uniform changes in appearance－Part 1：General introduction and designation system

KS M ISO 4628-10-2016

色漆和清漆涂层降解性的评定缺陷量值、大小和外观均匀变化强度的规定第10部分：丝状腐蚀等级的评定

Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of   uniform changes in appearance－Part 10：Assessment of degree of filiform corrosion

KS M ISO 4628-2-2016

色漆和清漆涂层降解性的评定缺陷量值、大小和外观均匀变化强度的规定第2部分：起泡度的评定

Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of   uniform changes in appearance－Part 2：Assessment of degree of blistering

KS M ISO 4628-3-2013

色漆和清漆.色漆涂层降解的评定.一般类型缺陷的强度、数量和大小的规定.第3部分：生锈程度的规定

Paints and varnishes — Evaluation of degradation of paint   coatings — Designation of intensity, quantity and   size of common types of defect — Part 3: Designation   of degree of rusting

KS M ISO 4628-4-2013

色漆和清漆.色漆涂层降解的评定.一般类型缺陷的强度、数量和大小的规定.第4部分：裂纹等级的规定

Paints and varnishes — Evaluation of degradation of paint   coatings — Designation of intensity, quantity and   size of common types of defect — Part 4: Designation   of degree of cracking

KS M ISO 4628-5-2017

色漆和清漆涂层降解性的评定缺陷量值、大小和外观均匀变化强度的规定第5部分：剥落度的评定

Paints and varnishes－Evaluation of degradation of coatings－ Designation of quantity and size of defects, and of intensity of   uniform changes in appearance－Part 5：Assessment of degree of flaking

KS M ISO 4628-6-2012

色漆和清漆涂层降解性的评定缺陷量值、大小和外观均匀变化强度的规定第6部分：用胶带法评定粉化程度

Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of   uniform changes in appearance－Part 6：Assessment of degree of chalking by tape method

KS M ISO 4628-7-2016

色漆和清漆涂层降解性的评定缺陷量值、大小和外观均匀变化强度的规定第7部分：用丝绒法评定粉化程度

Paints and varnishes－Evaluation of degradation of coatings－Designation of quantity and size of defects, and of intensity of   uniform changes in appearance－Part 7：Assessment of degree of chalking by velvet method

KS M ISO 4628-8-2013

涂层降解的评定缺陷数量和尺寸的规定和外观均匀变化强度的规定第8部分：划痕周围分层和腐蚀程度的评定

Evaluation of degradation of coatings ㅡ Designation of quantity and size of defects, and of   intensity of uniform changes in appearance ㅡ   Part 8: Assessment of degree of delamination and corrosion around a scribe

KS M ISO 4629-1-2018

色漆和清漆用粘合剂羟值的测定第1部分：不使用催化剂的滴定法

Binders for paints and varnishes ㅡ Determination of hydroxyl value ㅡ Part1: Titrimetric method without using a catalyst

KS M ISO 4629-2-2018

色漆和清漆用粘合剂羟值的测定第2部分：用催化剂滴定法

Binders for paints and varnishes ㅡ Determination of hydroxyl value ㅡ Part 2: Titrimetric method using a catalyst

KS M ISO 4630-1-2010

透明液体用加德纳色标评定颜色第1部分：目视法

Clear liquids－Estimation of colour by the Gardner colour scale－Part 1：Visual method

KS M ISO 4630-2-2010

透明液体加德纳色标法测定颜色第2部分：分光光度法

Clear liquids－Estimation of colour by the Gardner colour scale－Part 2：Spectrophotometric method

KS M ISO 4633-2013

橡胶密封.供水、排水和污水管道用密封圈.材料规范

Rubber seals－Joint rings for water supply, drainage and sewerage   pipelines－Specification for materials

KS M ISO 4635-2008

高速公路混凝土路面段之间用硫化预成型压缩密封橡胶材料规范

Rubber, vulcanized－Preformed compression seals for use   between concrete motorway paving sections－Specification   for material

KS M ISO 4637-2009

橡胶涂覆织物.橡胶与织物粘合强度的测定.直接拉伸法

Rubber-coated fabrics－Determination of rubber-to-fabric   adhesion－Direct tension method

KS M ISO 4638-2008

软质泡沫聚合材料.气流透过率的测定

Polymeric materials, cellular flexible－Determination of air flow   permeability

KS M ISO 4641-2014

吸水和排水用橡胶软管和软管组件.规范

Rubber hoses and hose assemblies for water   suction and discharge —   Specification

KS M ISO 4642-1-2017

消防用不可折叠橡胶和塑料软管.第1部分：固定系统用半刚性软管

Rubber and plastics hoses, non-collapsible,   for fire-fighting service — Part 1: Semi-rigid hoses for fixed systems

KS M ISO 4642-2-2017

消防用不可折叠橡胶和塑料软管.第2部分：泵和车辆用半刚性软管和软管组件

Rubber and plastics hoses, non-collapsible,   for fire-fighting service — Part 2: Semi-rigid hoses and hose assemblies for pumps and   vehicles

KS M ISO 4645-2015

橡胶和橡胶制品.抗降解剂鉴别指南.薄层色谱法

Rubber and rubber products－Guide to the identification of   antidegradants－Thin layer chromatographic methods

KS M ISO 4646-2009

橡胶或塑料涂覆织物低温冲击试验

Rubber- or plastics-coated fabrics－Low-temperature impact test

KS M ISO 4647-2014

硫化橡胶与织物帘线静态粘合强度的测定H拉力试验

Rubber, vulcanized — Determination of static adhesion to   textile cord — H-pull test

KS M ISO 4649-2012

橡胶.用旋转辊筒装置来测定耐磨性

Rubber, vulcanized or thermoplastic－Determination of abrasion resistance   using a rotating cylindrical drum device

KS M ISO 4650-2014

橡胶.识别.红外分光光谱法

Rubber — Identification — Infrared spectrometric   method

KS M ISO 4651-2008

泡沫橡胶和塑料.动态缓冲性能测定

Cellular rubbers and plastics－Determination of dynamic cushioning   performance

KS M ISO 4652-2014

橡胶配方配合剂.炭黑.用氮吸附法测定比表面积.单点法

Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption   methods — Single-point procedures

KS M ISO 4655-2009

橡胶.增强丁胶乳结合的苯乙烯总含量的测定

Rubber－Reinforced styrene-butadiene latex－Determination   of total bound styrene content

KS M ISO 4656-2017

橡胶配方配合剂.炭黑.压缩样品的吸油值（OAN）和吸油值（COAN）的测定

Rubber compounding ingredients — Carbon black — Determination of oil absorption number(OAN) and oil absorption   number of compressed sample(COAN)

KS M ISO 4658-2016

丙烯腈-丁二烯橡胶(NBR).评定规程

Acrylonitrile-butadiene rubber(NBR)－Evaluation procedure

KS M ISO 4659-2015

橡胶.丁苯橡胶(碳或碳黑和油母料).评定规程

Styrene-butadiene rubber(carbon black or   carbon black and oil masterbatches)－Evaluation procedure

KS M ISO 4660-2015

橡胶，自然的颜色指数测试

Rubber, raw natural－Colour index test

KS M ISO 4661-2-2009

硫化橡胶，硫化氢的制备和测试电池-第2部分：化学测试

Rubber, vulcanized－Preparation of samples and test   pieces-Part 2：Chemical tests

KS M ISO 4662-2014

橡胶、硫化或热塑性的测定复方抗性

Rubber, vulcanized or thermoplastic — Determination of rebound resilience

KS M ISO 4664-1-2017

橡胶、硫化或热塑性测定动力性能的测定（第1部分：一般准则）

Rubber, vulcanized or thermoplastic－Determination of dynamic properties－Part 1：General guidance

KS M ISO 4664-2-2012

橡胶、硫化或热塑性测定动力性能的测定（第2部分：扭转低频率的弯曲方法）

Rubber, vulcanized or thermoplastic－Determination of dynamic properties－Part 2：Torsion pendulum methods at low   frequencies

KS M ISO 4665-2009

橡胶、硫化或热塑性阻力

Rubber, vulcanized or thermoplastic－Resistance to weathering

KS M ISO 4666-1-2015

碱性橡胶，硫化硅的测定温度风险和阻力在黄体饲料中的疲劳：基本原理

Rubber, vulcanized－Determination of temperature rise and   resistance to fatigue in flexometer testing－Part 1：Basic principle

KS M ISO 4666-2-2015

纤维，硫化测定温度风险的测定和阻力在黄体动物饲料中的疲劳

Rubber, vulcanized－Determination of temperature rise and   resistance to fatigue in flexometer testing－Part 2：Rotary flexometer

KS M ISO 4666-3-2015

硫化橡胶屈挠试验温升和抗疲劳性能的测定第3部分：压缩屈挠仪

Rubber, vulcanized－Determination of temperature rise and   resistance to fatigue in flexometer testing－Part 3：Compression flexometer

KS M ISO 4666-4-2009

硫化，硫化测定温度风险和阻力在黄昏中的疲劳，第4部分：恒定的应力射箭器

Rubber, vulcanized－Determination of temperature rise and   resistance to fatigue in flexometer testing－ Part 4：Constant-stress flexometer

KS M ISO 4671-2013

橡胶及塑性合成器的测量方法和合体尺寸的测量方法

Rubber and plastics hoses and hose   assemblies－Methods of measurement   of the dimensions of hoses and the lengths of hose assemblies

KS M ISO 4674-1-2017

橡胶或塑性化工制造法测定茶阻力的测定第1部分：恒定率

Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods

KS M ISO 4674-2-2009

橡胶或塑料共化生产四氯化碳的测定（第2部分：阳极斜坡法）

Rubber- or plastics-coated fabrics－Determination of tear resistance－Part 2：Ballistic pendulum method

KS M ISO 4675-2012

橡胶或塑料加工生产低温低温测试

Rubber- or plastics-coated fabrics－Low-temperature bend test

KS M ISO 4683-1-2007

生羊皮第1部分：缺陷描述

Raw sheep skins－Part 1：Descriptions   of defects

KS M ISO 4683-2-2007

生羊皮第2部分：命名与表示

Raw sheep skins－Part 2：Designation   and presentation

KS M ISO 4684-2014

皮革.化学试验.挥发性物质的测定

Leather — Chemical tests — Determination of   volatile matter

KS M ISO 4707-2004

软木.塞子.尺寸特征的检验取样

Cork－Stoppers－Sampling for inspection of   dimensional characteristics

KS M ISO 4708-2004

复合软木.衬垫材料试验方法

Composition cork－Gasket material－Test methods

KS M ISO 4709-2004

复合软木.衬垫材料.分级体系要求、取样、包装和标记

Composition cork－Gasket material－Classification system, requirements, sampling, packaging and   marking

KS M ISO 4710-2004

软木.汽酒圆柱塞特性

Cork－Cylindrical stoppers for sparkling wines and gasified wines－Characteristics

KS M ISO 4711-2004

胶集成软木盘.规格

Agglomerated cork discs－Specifications

KS M ISO 4714-2004

复合软木.规范、取样、包装和标记

Composition cork－Specifications, sampling, packaging   and marking

KS M ISO 472-2016

塑料.词汇

Plastics-Vocabulary

KS M ISO 473-2011

色漆用锌钡白颜料.规范和试验方法

Lithopone pigments for paints－Specifications and methods of test

KS M ISO 48-2008

硫化橡胶或热塑性橡胶硬度的测定（硬度在10～100 IRHD之间）

Rubber, vulcanized or thermoplastic－Determination of hardness(hardness   between 10 IRHD and 100 IRHD)

KS M ISO 489-2007

塑料.反射指数的测定

Plastics－Determination of refractive index

KS M ISO 4892-1-2017

塑料实验室光源曝露试验方法第1部分：通用指南

Plastics－Methods of exposure to laboratory light sources－Part 1：General guidance

KS M ISO 4892-2-2017

塑料实验室光源曝露试验方法第2部分：氙弧灯

Plastics－Methods of exposure to laboratory light sources－Part 2：Xenon-arc lamps

KS M ISO 4892-3-2017

塑料实验室光源曝露试验方法第3部分：荧光紫外灯

Plastics－Methods of exposure to laboratory light sources－Part 3：Fluorescent UV lamps

KS M ISO 4892-4-2015

塑料实验室光源曝露试验方法第4部分：明火碳弧灯

Plastics－Methods of exposure to laboratory light sources－Part 4：Open-flame carbon-arc lamps

KS M ISO 4894-2-2016

塑料苯乙烯/丙烯腈（SAN）模塑和挤塑材料第2部分：试样制备和性能测定

Plastics－Styrene/Acrylonitirile(SAN) moulding and extrusion materials－Part 2：Preparation of test specimens and   determination of properties

KS M ISO 4895-2010

塑料.液态环氧树脂.结晶性的测定

Plastics－Liquid epoxy resins－Determination of   tendency to crystallize

KS M ISO 4897-2002

泡沫塑料.低温下的硬质材料线性热膨胀系数的测定

Cellular plastics－Determination of the coefficient of   linear thermal expansion of rigid materials at sub-ambient temperatures

KS M ISO 4898-2013

硬质泡沫塑料.建筑物用隔热产品.规范

Rigid cellular plastics — Thermal insulation products for   buildings — Specifications

KS M ISO 4899-2002

玻璃纤维增强热固性塑料.性能和测试方法

Tixtile－glass－reinforced thermosetting plastics－Properties and test methods

KS M ISO 4901-2013

以不饱和聚酯树脂为基体的强化塑料.剩余苯乙烯单体含量的测定

Reinforced plastics based on unsaturated   polyester resins ―   Determination of residual styrene monomer content

KS M ISO 498-2002

浓缩天然胶乳.干胶制备

Natural rubber latex concentrate－Preparation of dry films

KS M ISO 5024-2003

石油液体和液化石油气体.测量.标准参照条件

Petroleum liquids and liquefied petroleum   gases－Measurement－Standard reference conditions

KS M ISO 506-2010

浓缩天然胶乳挥发性脂肪酸值的测定

Rubber latex, natural, concentrate－Determination of volatile fatty acid   number

KS M ISO 510-2013

油漆用红丹

Red lead for paints

KS M ISO 5163-2015

石油产品发动机和航空燃料爆震特性测定发动机法

Petroleum products－Determination of knock   characteristics of motor and aviation fuels－Motor   method

KS M ISO 5164-2015

石油产品发动机燃料爆震特性测定方法研究方法

Petroleum products－Determination of knock   characteristics of motor fuels－Research method

KS M ISO 5165-2003

石油产品.柴油燃料点火质量的测定.十六烷法

Petroleum products－Determination of the ignition quality   of diesel fuels－Cetane engine method

KS M ISO 5263-1-2009

纸浆实验室湿粉碎第1部分：化学纸浆的粉碎

Pulps－Laboratory wet disintegration－Part 1：Disintegration of chemical pulps

KS M ISO 5263-2-2009

纸浆实验室湿粉碎第2部分：20℃机械浆粉碎

Pulps－Laboratory wet disintegration－Part 2：Disintegration of mechanical pulps at 20 ℃

KS M ISO 5263-3-2009

纸浆实验室湿粉碎第3部分：85℃及以上机械浆粉碎

Pulps－Laboratory wet disintegration－Part 3：Disintegration of mechanical pulps at ≥85 ℃

KS M ISO 5264-1-2016

纸浆实验室打浆第1部分：谷打浆法

Pulps－Laboratory beating－Part 1：Valley beater method