KS P ISO 11953-2012

牙科－植入物－手扭距仪的临床性能

Dentistry－Implants－Clinical performance   of hand torque instruments

KS P ISO 11140-1-2012

眼科植入物.眼内透镜.第1部分：词汇

Ophthalmic implants — Intraocular lenses — Part 1: Vocabulary

KS P ISO 11140-2-2002

眼科植入物.眼内透镜.第3部分：机械性能和试验方法

Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods

KS P ISO 11140-3-2009

眼科植入物.眼内透镜.第4部分：标签和信息

Ophthalmic implants — Intraocular lenses — Part 4: Labelling and information

KS P ISO 11140-4-2009

眼科植入物人工晶状体第5部分：生物相容性

Ophthalmic implants－Intraocular lenses－Part 5：Biocompatibility

KS P ISO 11140-5-2009

眼科植入物人工晶状体第6部分：保存期和运输稳定性

Ophthalmic implants－Intraocular lenses－Part 6：Shelf-life and transport stability

KS P ISO 11199-1-2014

眼科植入物人工晶状体第7部分：临床研究

Ophthalmic implants－Intraocular lenses－Part 7：Clinical investigations

KS P ISO 11199-2-2014

眼科植入物.眼内透镜.第8部分：基本要求

Ophthalmic implants — Intraocular lenses — Part 8: Fundamental requirements

KS P ISO 11980-2006

眼科光学.接触镜和接触镜保护产品.临床检测指南

Ophthalmic optics－Contact lenses and contact lens care   products－Guidance for clinical investigations

KS P ISO 12189-2009

外科植入物可植入脊柱装置的机械试验使用前支架的脊柱植入装置疲劳试验方法

Implants for surgery－Mechanical testing of implantable   spinal devices－Fatigue test method for spinal implant   assemblies using an anterior support

KS P ISO 11199-3-2014

造口辅助设备用皮肤屏障.试验方法.第1部分：尺寸、表面pH值和吸水性

Skin barrier for ostomy aids — Test methods — Part 1: Size, surface pH and water-absorbency

KS P ISO 12865-2002

眼科仪器.检眼镜

Ophthalmic instruments－Retinoscopes

KS P ISO 12866-2002

眼科仪器.视野计

Ophthalmic instruments－Perimeters

KS P ISO 11334-1-2010

外科植入物的修复和分析.第1部分：修复和处理

Retrieval and analysis of surgical implants   — Part 1: Retrieval and   handling

KS P ISO 11334-4-2007

外科植入物的回收和分析第2部分：回收的金属外科植入物的分析

Retrieval and analysis of surgical implants－Part 2：Analysis   of retrieved metallic surgical implants

KS P ISO 11418-1-2009

外科植入物的回收和分析第3部分：回收的聚合外科植入物的分析

Retrieval and analysis of surgical implants－Part 3：Analysis   of retrieved polymeric surgical implants

KS P ISO 11418-2-2009

外科植入物的回收和分析第4部分：回收的陶瓷外科植入物的分析

Retrieval and analysis of surgical implants－Part 4：Analysis   of retrieved ceramic surgical implants

KS P ISO 13017-2018

牙科学.磁性附件

Dentistry — Magnetic attachments

KS P ISO 13116-2017

牙科材料放射性不透明度测定方法

Dentistry ─ Test Method for Determining Radio-Opacity of   Materials

KS P ISO 13295-2008

牙科旋转器械心轴

Dentistry－Mandrels for rotary instruments

KS P ISO 13356-2009

外科植入物基于钇稳定四方氧化锆（Y-TZP）的陶瓷材料

Implants for surgery－Ceramic materials based on   yttria-stabilized tetragonal zirconia(Y-TZP)

KS P ISO 11418-3-2009

牙周刮匙、牙科刮除器和牙钻孔器.第1部分：一般要求

Periodontal curettes, dental scalers and   excavators — Part 1:General   requirements

KS P ISO 11418-4-2009

牙科学.牙周刮匙、牙刮除器和牙钻孔器.第2部分：Gr型牙周刮匙

Dentistry — Periodontal curettes, dental scalers and excavators — Part 2: Periodontal curettes of Gr-type

KS P ISO 11418-5-2009

牙周刮匙、牙刮除器和牙钻孔器.第4部分：牙钻孔器.盘状

Periodontal curettes, dental scalers and   excavators — Part 4: Dental   excavators — Discoid type

KS P ISO 13402-2008

外科和牙科手用器械耐高压灭菌、耐腐蚀和耐热性的测定

Surgical and dental hand instruments－Determination of resistance against   autoclaving, corrosion and thermal exposure

KS P ISO 13404-2012

假肢和矫形学外部矫形和矫形部件的分类和描述

Prosthetics and orthotics－Categorization and description of   external orthoses and orthotic components

KS P ISO 11418-7-2009

修复和矫形学修复部件的分类和描述第1部分：修复部件的分类

Prosthetics and orthotics－Classification and description of   prosthetic components－Part 1：Classification   of prosthetic components

KS P ISO 11607-1-2007

假肢和矫形学假肢部件的分类和描述第2部分：下肢假肢部件的描述

Prosthetics and orthotics－Classification and description of   prosthetic components－Part 2：Description   of lower-limb prosthetic components

KS P ISO 11607-2-2007

假肢和矫形学假肢部件的分类和描述第3部分：上肢假肢部件的描述

Prosthetics and orthostics－Classification and description of   prosthetic components－Part 3：Description   of upper-limb prosthetic components

KS P ISO 11737-1-2012

保健产品无菌加工第1部分：一般要求

Aseptic processing of health care products－Part 1：General   requirements

KS P ISO 11737-2-2012

保健产品无菌加工第2部分：过滤

Aseptic processing of health care products－Part 2：Filtration

KS P ISO 11979-1-2017

保健品无菌加工第3部分：冻干

Aseptic processing of health care products－Parts 3：Lyophilization

KS P ISO 11979-3-2017

保健产品无菌加工第4部分：就地清洁技术

Aseptic processing of health care products－Part 4：Clean-in-place   technologies

KS P ISO 11979-4-2017

保健品无菌加工第5部分：就地灭菌

Aseptic processing of healthcare products－Part 5：Sterilization   in place

KS P ISO 11979-5-2006

保健产品无菌加工第6部分：隔离系统

Aseptic processing of health care products－Part 6：Isolator   systems

KS P ISO 13485-2007

医疗器械质量管理体系监管要求

Medical devices－Quality management systems－Requirements for regulatory purposes

KS P ISO 11979-6-2006

轮椅.第1部分：ISO 7176系列轮椅应用指南

Wheelchairs－Part 1：Guidelines for the   application of the ISO 7176 series on wheelchairs

KS P ISO 13716-2014

可逆和不可逆水解胶体印模材料系统

Dentistry — Reversible-irreversible hydrocolloid impression   material systems

KS P ISO 11979-7-2006

乳酸羟基磷灰石植入物：脑羟基磷灰石

Implants for surgery — Hydroxyapatite — Part 1: Ceramic hydroxyapatite

KS P ISO 11979-8-2017

增殖羟基磷灰石植入物：羟基磷灰石涂层

Implants for surgery — Hydroxyapatite — Part 2: Coatings of hydroxyapatite

KS P ISO 12505-1-2016

促肾上腺皮质植入物的植入物第三部分：晶体化学分析与表征

Implants for surgery－Hydroxyapatite－Part 3：Chemical analysis and   characterization of crystallinity and phase purity

KS P ISO 12891-1-2014

促肾上腺皮质植入物第4部分：凝固粘附强度的测定

Implants for surgery－Hydroxyapatite－Part 4：Determination of coating adhesion   strength

KS P ISO 13781-2008

外科植入物.用聚L-交酯树脂及制品体外降解试验

Poly(L-lactide) resins and fabricated forms   for surgical implants－In   vitro degradation testing

KS P ISO 13782-2009

外科植入物.金属材料.外科植入用纯钽材料

Implants for surgery－Metallic materials－Unalloyed tantalum for surgical implant applications

KS P ISO 13897-2018

牙科学.汞齐合金胶囊

Dentistry－Amalgam capsules

KS P ISO 12891-2-2008

注射笔系统.第1部分:医用针头注射器用玻璃套筒

Pen systems－Part 1：Glass cylinders for   pen-injectors for medical use

KS P ISO 12891-3-2008

注射笔系统.第2部分:医用笔式注射器的柱塞和盘

Pen systems－Part 2：Plungers and discs for   pen-injectors for medical use

KS P ISO 13958-2009

血液透析和相关治疗的浓缩物

Concentrates for haemodialysis and related   therapies

KS P ISO 13959-2009

血液透析用水和有关疗法

Water for haemodialysis and related   therapies

KS P ISO 13960-2017

心血管植入物与人造器官.血浆过滤器

Cardiovascular implants and extracorporeal   systems — Plasmafilters

KS P ISO 12891-4-2008

人体医疗器械临床调查第1部分：一般要求

Clinical investigation of medical devices   for human subjects－Part   1：General requirements

KS P ISO 13397-1-2018

人体医疗器械临床调查第2部分：临床调查方案

Clinical investigation of medical devices   for human subjects－Part   2：Clinical investigation plans

KS P ISO 14161-2012

医疗保健产品灭菌生物指标选择、使用和结果解释指南

Sterilization of health care products－Biological indicators－Guidance for the selection, use and interpretation of results

KS P ISO 14233-2004

牙科学.聚合基模具材料

Dentistry－Polymer-based die materials

KS P ISO 13397-2-2018

外科植入物全髋关节假体的磨损第1部分：磨损试验机的载荷和位移参数及试验的相应环境条件

Implants for surgery－Wear of total hip-joint prostheses－ Part 1：Loading and displacement   parameters for wear-testing machines and corresponding environmental   conditions for test

KS P ISO 13397-4-2018

外科植入物全髋关节假体的磨损第2部分：测量方法

Implants for surgery－Wear of total hip-joint prostheses－Part 2：Methods of measurement

KS P ISO 13405-1-2016

外科植入物.全膝关节假体的磨损.第1部分：磨损试验机的负荷控制和相应的试验环境条件的负荷和位移参数

Implants for surgery－Wear of total knee-joint prostheses－ Part 1：Loading and displacement   parameters for wear-testing machines with load control and corresponding   environmental conditions for test

KS P ISO 13405-2-2016

外科植入物.全膝关节假肢的磨损.第2部分：测量方法

Implants for surgery — Wear of total knee-joint prostheses — Part 2: Methods of measurement

KS P ISO 13405-3-2016

外科植入物.全膝关节假体的磨损.第3部分：带位移控制的磨损试验机的负荷和位移参数及试验的相应环境条件

Implants for surgery－Wear of total knee-joint prostheses－Part 3：Loading and displacement parameters   for wear-testing machines with displacement control and corresponding   environmental conditions for test

KS P ISO 14356-2014

牙科学.复制材料

Dentistry — Duplicating material

KS P ISO 14408-2009

激光手术用气管掐管.标识及附带信息要求

Tracheal tubes designed for laser surgery－Requirements for marking and   accompanying information

KS P ISO 14457-2017

牙科-机头和电机

Dentistry ─ Handpieces and motors

KS P ISO 14602-2017

固定外科植入物.骨接合术用植入物.特殊要求

Non-active surgical implants－Implants for osteosynthesis－Particular requirements

KS P ISO 14607-2009

外科植入物.乳房植入物的特殊要求

Implants for surgery－Specific requirements for mammary   implants

KS P ISO 14630-2009

非活动外科植入物的一般要求

Non-active surgical implants－General requirements

KS P ISO 13408-1-2017

外科植入物有源可植入医疗器械第1部分：安全、标记和制造商提供信息的一般要求

Implants for surgery－Active implantable medical devices－Part 1：General requirements for safety,   marking and for information to be provided by the manufacturer

KS P ISO 13408-2-2010

外科植入物有源可植入医疗器械第2部分：心脏起搏器

Implants for surgery－Active implantable medical devices－Part 2：Cardiac pacemakers

KS P ISO 13408-3-2010

外科植入物主动植入式医疗器械第3部分：植入式神经刺激器

Implants for surgery－Active implantable medical devices－Part 3：Implantable neurostimulators

KS P ISO 13408-4-2010

外科植入物有源可植入医疗器械第4部分：可植入输液泵

Implants for surgery－Active implantable medical devices－Part 4：Implantable infusion pumps

KS P ISO 13408-5-2010

外科植入物有源可植入医疗器械第5部分：循环支持设备

Implants for surgery－Active implantable medical devices－Part 5：Circulatory support devices

KS P ISO 14801-2013

牙科植入物骨内植入物动态疲劳试验方法

Dentistry－Implants－Dynamic fatigue test   for endosseous dental implants

KS P ISO 13408-6-2017

外科植入物.全膝关节假体.第1部分:胫骨部件疲劳性能的测定

Implants for surgery－Total knee-joint prostheses－Part 1：Determination of endurance   properties of knee tibial trays

KS P ISO 14937-2012

医疗保健产品灭菌灭菌剂特性及医疗器械灭菌过程的开发、验证和常规控制的一般要求

Sterilization of health care products－General requirements for   characterization of a sterilizing agent and the development, validation and   routine control of a sterilization process for medical devices

KS P ISO 14949-2009

外科植入物.两部分辅助治疗聚硅酮弹性材料

Implants for surgery－Two-part addition-cure silicone   elastomers

KS P ISO 15010-2018

输血和输液瓶用用弃式悬挂装置.要求和试验方法

Disposable hanging devices for transfusion   and infusion bottles —   Requirements and test methods

KS P ISO 15032-2005

修复术.髋关节结构试验

Prostheses－Structural testing of hip units

KS P ISO 13779-1-2014

牙科起子.第1部分：一般要求

Dental elevators — Part 1: General requirements

KS P ISO 13779-2-2014

牙科起子.第2部分：沃里克·詹姆斯起子

Dental elevators — Part 2: Warwick James elevators

KS P ISO 13779-3-2009

牙科起子.第3部分：Cryer起子

Dental elevators — Part 3: Cryer elevators

KS P ISO 13779-4-2009

牙科起子.第4部分：Coupland起子

Dental elevators — Part 4: Coupland elevators

KS P ISO 13926-1-2010

牙科起子.第5部分：BEIN起子

Dental elevators — Part 5: Bein elevators

KS P ISO 13926-2-2017

牙科起子.第6部分：Flohr起子

Dental elevators — Part 6: Flohr elevators

KS P ISO 14155-1-2007

牙科镊子.第1部分：一般要求

Dental tweezers — Part 1: General requirements

KS P ISO 14155-2-2007

牙科镊子.第2部分：Meriam型

Dental tweezers — Part 2: Meriam types

KS P ISO 14242-1-2009

牙科镊子第3部分：学院型

Dental tweezers－Part 3：College   types

KS P ISO 14242-2-2007

外科植入物金属髓内钉系统第1部分：髓内钉

Implants for surgery－Metal intramedullary nailing systems－Part 1：Intramedullary nails

KS P ISO 14243-1-2009

外科植入物金属髓内钉系统第2部分：锁定部件

Implants for surgery－Metal intramedullary nailing systems－Part 2：Locking components

KS P ISO 14243-2-2014

外科植入物金属髓内钉系统第3部分：连接装置和扩孔器直径测量

Implants for surgery－Metal intramedullary nailing systems－Part 3：Connection devices and reamer   diameter measurements

KS P ISO 15189-2013

医学实验室.质量和能力的特殊要求

Medical laboratories ─ Requirements for quality and   competence

KS P ISO 15190-2010

医学实验室.安全要求

Medical laboratories－Requirements for safety

KS P ISO 15193-2014

实验室条件下医用诊断装置.生物原始试样中数量值的测量.参考测量法的说明

In vitro diagnostic medical devices — Measurement of quantities in samples   of biological origin — Requirements for content and   presentation of reference measurement procedures

KS P ISO 15194-2014

实验室条件下医用诊断装置.生物原始试样中数量值的测量.标准物质的描述

In virto diagnostic medical devices — Measurement of quantities in samples   of biological origin — Requirements for certified   reference materials and the content of supporting documentation

KS P ISO 15195-2014

实验室医学.参考测量实验室的要求

Laboratory medicine — Requirements for reference   measurement laboratories

KS P ISO 15197-2017

体外诊断试验系统.糖尿病症管理中自测用血糖监测系统的要求

In vitro diagnostic test systems — Requirements for blood-glucose   monitoring systems for self-testing in managing diabetes mellitus

KS P ISO 15198-2017

临床实验室药物.体外诊断医疗设备.由制造商证实的用户质量控制程序

Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer

KS P ISO 15223-2007

医疗器械.用于医疗器械标签、作标记和提供信息的符号

Medical devices－Symbols to be used with medical   device labels, labelling and information to be supplied

KS P ISO 15225-2014

医疗器械.质量管理.医疗器械命名数据结构

Medical devices — Quality management — Medical device nomenclature data structure

KS P ISO 15374-2009

外科植入物.锻件生产要求

Implants for surgery－Requirements for production of   forgings

KS P ISO 15606-2012

牙科手机.气动刮器和刮器梢尖

Dental handpieces－Air-powered scalers and scaler tips

KS P ISO 15621-2007

吸尿器材评定的一般指南

Urine-absorbing aids－General guidance on evaluation

KS P ISO 1563-2009

牙科用藻酸盐牙印模

Dental alginate impression material

KS P ISO 1564-2012

牙科琼脂基水胶仿印模材料

Dental aqueous impression materials based   on agar

KS P ISO 15674-2009

心血管植入物和人工器官－硬壳式心脏切除术/静脉储备系统（有/无过滤器）和软静脉储备袋

Cardiovascular implants and artificial   organs－Hard-shell   cardiotomy/venous reservoir systems(with/without filter) and soft venous   reservoir bags

KS P ISO 15675-2009

心血管植入物和人工器官－心肺转流系统－动脉血液过滤器

Cardiovascular implants and artificial   organs－Cardiopulmonary bypass   systems－Arterial blood line filters

KS P ISO 15676-2007

心血管植入物和人工器官体外循环（CBP）和体外膜氧合（ECMO）一次性导管包装要求

Cardiovascular implants and artificial   organs－Requirements for   single-use tubing packs for cardiopulmonary bypass(CBP) and extracorporeal   membrane oxygenation(ECMO)

KS P ISO 15747-2008

静脉注射用塑料容器

Plastics containers for intravenous   injection

KS P ISO 15752-2006

眼科仪器.内发光器.光辐射安全的基本要求和试验方法

Ophthalmic instruments－Endoilluminators－Fundamentalrequirements and test methods for optical radiation   safety

KS P ISO 15798-2006

眼科植入物.眼科手术粘接器件

Ophthalmic implants－Ophthalmic viscosurgical devices

KS P ISO 15814-2008

外科植入物.聚合交脂基共聚物及混料.体外降解试验

Implants for surgery－Copolymers and blends based on   polylactide－In vitro degradation testing

KS P ISO 15841-2017

牙科学.正畸用金属丝

Dentistry — Wires for use in orthodontics

KS P ISO 15854-2013

牙科铸造和基板蜡

Dentistry－Casting and baseplate waxes

KS P ISO 14243-3-2009

洗涤器消毒剂第1部分：一般要求、术语、定义和试验

Washer-disinfectors－Part 1：General   requirements,terms and definitions and tests

KS P ISO 14708-1-2007

洗涤器消毒剂－第2部分：外科器械、麻醉设备、碗、碟、杯、器皿、玻璃器皿等采用热消毒的洗涤器消毒剂的要求和试验。

Washer-disinfectors－Part 2：Requirements   and tests for washer-disinfectors employing thermal disinfection for surgical   instruments, anaesthetic equipment, bowls, dishes, receivers,utensils,   glassware, etc.

KS P ISO 14708-2-2014

洗涤消毒剂第3部分：用热消毒的洗涤消毒剂的要求和试验

Washer-disinfectors－Part 3：Requirements   and tests for washer-disinfectors employing thermal disinfection for

KS P ISO 14708-3-2010

洗涤器消毒剂第4部分：不耐热内窥镜用化学消毒洗涤器消毒剂的要求和试验

Washer-disinfectors－Part 4：Requirements   and tests for washer-disinfectors employing chemical disinfection for   thermolabile endoscopes

KS P ISO 15912-2009

牙科铸造包埋材料和难熔模材料

Dentistry－Casting investments and refractory die materials

KS P ISO 16021-2011

吸尿辅助器具一次性使用成人失禁吸尿辅助器具使用者和护理者评价的基本原则

Urine-absorbing aids－Basic principles for evaluation of   single-use adult-incontinence-absorbing aids from the perspective of users   and caregivers

KS P ISO 16054-2009

外科植入物.外科植入物的最小数据集

Implants for surgery－Minimum data sets for surgical   implants

KS P ISO 16059-2009

牙科学数据交换用编码所需的要素

Dentistry－Required elements for codification used in data   exchange

KS P ISO 16061-2014

与非有源外科植入物相关的仪器.一般要求

Instrumentation for use in association with   non-active surgical implants — General requirements

KS P ISO 16256-2017

临床实验室试验和体外诊断试验系统感染性疾病酵母菌抗菌剂体外活性检测的参考方法

Clinical laboratory testing and in vitro   diagnostic test systems ─ Reference method for testing the in vitro activity of   antimicrobial agents against yeast fungi involved in infectious diseases

KS P ISO 16391-2011

造口和尿失禁辅助器具灌洗器具要求和试验方法

Aids for ostomy and incontinence－Irrigation sets－Requirements and test methods

KS P ISO 16402-2009

外科植入物－丙烯酸树脂水泥－骨科用丙烯酸树脂水泥的弯曲疲劳试验

Implants for surgery－Acrylic resin cement－Flexural fatigue testing of acrylic resin cements used in   orthopaedics

KS P ISO 16408-2014

牙科学.口腔卫生产品.口腔冲洗

Dentistry — Oral hygiene products — Oral   rinses

KS P ISO 16409-2017

牙科－口腔卫生用品－手动齿间刷

Dentistry－Oral hygiene products－Manual   interdental brushes

KS P ISO 16428-2007

外科植入物可植入材料和医疗器械静态和动态腐蚀试验的试验溶液和环境条件

Implants for surgery－Test solutions and environmental   conditions for static and dynamic corrosion tests on implantable materials   and medical devices

KS P ISO 16429-2010

外科植入物.金属可植入材料和过期医疗设备的开放电路潜在腐蚀性能测量

Implants for surgery－Measurements of open-circuit   potential to assess corrosion behaviour of etallic implantable materials and   medical devices over extended time periods

KS P ISO 16443-2017

牙科植入系统及相关程序词汇

Dentistry ─ Vocabulary for dental implants systems and related   procedure

KS P ISO 14708-4-2010

牙科学.牙科橡胶坝器械.第2部分：钳子

Dentistry ─ Dental rubber dam instruments ─ Part 2: Clamp forceps

KS P ISO 16671-2006

眼科植入物.眼外科用冲洗法

Ophthalmic implants－Irrigating solutions for ophthalmic   surgery

KS P ISO 16672-2006

外科植入物.眼内填塞

Ophthalmic implants－Ocular endotamponades

KS P ISO 14708-5-2012

轮椅座椅第1部分：词汇、基准轴惯例和人体节段、姿势和姿势支撑面的测量方法

Wheelchair seating－Part 1：Vocabulary,   reference axis convention and measures for body segments, posture and   postural support surfaces

KS P ISO 16840-10-2017

轮椅非整体式座椅和靠背支撑垫的耐燃性第10部分：要求和试验方法

Wheelchairs ─ Resistance to ignition of non-integrated seat and   back support cushions ─ Part 10: Requirements and   test methods

KS P ISO 14879-1-2008

轮椅座椅第2部分：管理组织完整性的装置的物理和机械特性的测定坐垫

Wheelchair seating－Part 2：Determination   of physical and mechanical characteristics of devices intended to manage   tissue integrity－Seat cushions

KS P ISO 14971-1-2002

轮椅座椅.第3部分：姿势支撑装置的静态、冲击和重复荷载强度的测定

Wheelchair seating — Part 3: Determination of static,   impact and repetitive load strengths for postural support devices

KS P ISO 15087-1-2018

轮椅座椅第4部分：机动车辆用座椅系统

Wheelchair seating－Part 4：Seating   systems for use in motor vehicles

KS P ISO 15087-2-2018

轮椅座椅第6部分：座垫性能变化的模拟使用和测定

Wheelchair seating ─ Part 6: Simulated use and   determination of the changes in properties of seat cushions

KS P ISO 16954-2017

牙科学牙科单位水线生物膜处理试验方法

Dentistry ─ Test methods for dental unit waterline biofilm   treatment

KS P ISO 15087-3-2018

尿失禁者用吸尿器材聚合物吸收材料特性的试验方法

Urine-absorbing aids for incontinence－Test methods for characterizing   polymer-based absorbent materials－

KS P ISO 17190-10-2011

尿失禁者用吸尿器材聚合物吸收材料特性的试验方法第10部分：电位滴定法测定可提取聚合物含量

Urine-absorbing aids for incontinence－Test methods for characterizing   polymer-based absorbent materials－Part 10：Determination of extractable polymer content by potentiometric   titration

KS P ISO 17190-11-2011

尿失禁者用吸尿器材聚合物吸收材料特性的试验方法第11部分：可吸入颗粒物含量的测定

Urine-absorbing aids for incontinence－Test methods for characterizing   polymer-based absorbent materials－Part 11：Determination of content of respirable particles

KS P ISO 15087-4-2018

尿失禁者用吸尿器材聚合物吸收材料特性的试验方法第2部分：残留单体的测定

Urine-absorbing aids for incontinence－Test methods for characterizing   polymer-based absorbent materials－Part 2：Determination of amount of residual monomers

KS P ISO 15087-5-2018

尿失禁者用吸尿器材聚合物基吸水材料特性的试验方法第3部分：用筛析法测定粒径分布

Urine-absorbing aids for incontinence－Test methods for characterizing   polymer-based absorbent materials－Part 3：Determination of particle size distribution by sieve fractionation

KS P ISO 15087-6-2018

尿失禁者用吸尿器材聚合物吸收材料特性的试验方法第4部分：加热失重法测定含水量

Urine-absorbing aids for incontinence－Test methods for characterizing   polymer-based absorbent materials－Part 4：Determination of moisture content by mass loss upon heating

KS P ISO 15098-1-2018

尿失禁者用吸尿器材聚合物吸收材料特性的试验方法第5部分：盐溶液中自由膨胀容量的重量法测定

Urine-absorbing aids for incontinence－Test methods for characterizing   polymer-based absorbent materials－Part 5：Gravimetric determination of free swell capacity in saline   solution

KS P ISO 15098-2-2018

尿失禁者用吸尿器材聚合物基吸水材料特性的试验方法第6部分：离心后盐水溶液中液体滞留量的重量法测定

Urine-absorbing aids for incontinence－Test methods for characterizing   polymer-based absorbent materials－Part 6：Gravimetric determination of fluid retention capacity in saline   solution after centrifugation

KS P ISO 15098-3-2008

尿失禁者用吸尿器材聚合物吸收材料特性的试验方法第7部分：压力下吸收的重量法测定

Urine-absorbing aids for incontinence－Test methods for characterizing   polymer-based absorbent materials－Part 7：Gravimetric determination of absorption under pressure

KS P ISO 15142-1-2010

尿失禁者用吸尿器材聚合物吸收材料特性的试验方法第8部分：流量的重量法测定

Urine-absorbing aids for incontinence－Test methods for characterizing   polymer-based absorbent materials－Part 8：Gravimetric determination of flowrate

KS P ISO 15142-2-2010

尿失禁者用吸尿器材聚合物吸水材料特性的试验方法第9部分：密度的重量法测定

Urine-absorbing aids for incontinence－Test methods for characterizing   polymer-based absorbent materials－Part 9：Gravimetric determination of density

KS P ISO 17191-2011

尿失禁者用吸尿器材空气中可呼吸聚丙烯酸酯高吸水材料的测定钠原子吸收光谱法测定收集盒中灰尘

Urine-absorbing aids for incontinence－Measurement of airborne respirable   polyacrylate superabsorbent materials－Determination   of dust in collection cassettes by sodium atomic absorption spectrometry

KS P ISO 17218-2016

一次性使用无菌丝状针

Sterile filiform acupuncture needles for   single use

KS P ISO 17304-2017

牙科学聚合收缩：聚合物基修复材料聚合收缩的测定方法

Dentistry ─ Polymerization shrinkage: Method for determination of   polymerization shrinkage of polymer-based restorative materials

KS P ISO 15142-3-2010

睡眠窒息呼吸治疗.第2部分：面罩和应用附件

Sleep apnoea breathing therapy－Part 1：Sleep   apnoea breathing therapy equipment

KS P ISO 15883-1-2012

睡眠窒息呼吸治疗.第2部分：面罩和应用附件

Sleep apnoea breathing therapy－Part 2：Masks   and application accessories

KS P ISO 17511-2010

体外诊断医疗装置.生物试样的定量测量.校准仪和控制材料赋值的计量溯源性

In vitro diagnostic medical devices－Measurement of quantities in   biological samples－Metrological traceability of   values assigned to calibrators and control materials

KS P ISO 17593-2009

临床实验室试验和体外医疗器械口服抗凝治疗自检测体外监测系统要求

Clinical laboratory testing and in vitro   medical devices－Requirements   for in vitro monitoring systems for self-testing of oral anticoagulant   therapy

KS P ISO 15883-2-2012

医疗保健产品灭菌湿热第1部分：医疗器械灭菌过程的制定、验证和常规控制要求

Sterilization of health care products－Moist heat－Part   1：Requirements for the development, validation and   routine control of a sterilization process for medical devices

KS P ISO 17730-2017

牙科氟化物清漆

Dentistry ─ Fluoride varnishes

KS P ISO 17853-2009

植入材料的磨损.聚酯和金属磨损粒子.离析、表征和量化

Wear of implant materials－Polymer and metal wear particles－Isolation, characterization and quantification

KS P ISO 17937-2018

牙科-骨凿

Dentistry ─ Osteotome

KS P ISO 1797-1-2004

牙科旋转器械柄第1部分：金属柄

Dental rotary instruments－Shanks－Part 1：Shanks made of metal

KS P ISO 1797-2-2012

牙科旋转器械柄第2部分：塑料柄

Dental rotary instrument－Shanks－Part 2：Shanks made of plastics

KS P ISO 15883-3-2012

体外诊断医疗器械.制造商提供的信息（标签）.第1部分：术语、定义和一般要求

In vitro diagnostic medical devices — Information supplied by the   manufacturer(labelling) — Part 1: Terms, definitions   and general requirements

KS P ISO 15883-4-2012

体外诊断医疗器械.制造商提供的信息（标签）.第2部分：专业用体外诊断试剂

In vitro diagnostic medical devices — Information supplied by the   manufacturer(labelling) — Part 2: In vitro diagnostic   reagents for professional use

KS P ISO 16635-2-2017

体外诊断医疗器械.制造商提供的信息（标签）.第3部分：专业用体外诊断仪器

In vitro diagnostic medical devices — Information supplied by the   manufacturer (labelling) — Part 3: In vitro   diagnostic instruments for professional use

KS P ISO 16840-1-2011

体外诊断医疗器械.制造商提供的信息（标签）.第4部分：自我试验用体外诊断试剂

In vitro diagnostic medical devices — Information supplied by the   manufacturer(labelling) — Part 4: In vitro diagnostic   reagents for self-testing

KS P ISO 16840-2-2011

体外诊断医疗器械.制造商提供的信息（标签）.第5部分：自我试验用体外诊断仪器

In vitro diagnostic medical devices — Information supplied by the   manufacturer(labelling) — Part 5: In vitro diagnostic   instruments for self-testing

KS P ISO 18153-2010

体外诊断医疗装置.生物样品的定量测量.校准仪和控制材料所赋酶的催化浓度值的计量溯源性

In vitro diagnostic medical devices－Measurement of quantities in   biological samples－Metrological traceability of   values for catalytic concentration of enzymes assigned to calibrators and   control materials

KS P ISO 16840-3-2017

外科植入物总椎间盘假体的磨损第1部分：磨损试验的载荷和位移参数及试验的相应环境条件

Implants for surgery－Wear of total intervertebral spinal   disc prostheses－Part 1：Loading   and displacement parameters for wear testing and corresponding environmental   conditions for test

KS P ISO 19001-2017

实验室诊断医疗设备.生物着色用实验室诊断试剂生产厂商提供的信息

In virto diagnostic medical devices — Information supplied by the   manufacturer with in vitro diagnostic reagents for staining in biology

KS P ISO 1942-2010

牙科学词汇

Dentistry－Vocabulary

KS P ISO 19610-2018

红参工业生产工艺通用要求

General requirements for industrial   manufacturing process of red ginseng

KS P ISO 19611-2018

抽气拔罐装置

Air extraction cupping device

KS P ISO 20127-2009

牙科动力牙刷一般要求和试验方法

Dentistry－Powered toothbrushes－General   requirements and test methods

KS P ISO 20160-2008

外科植入物金属材料α+β钛合金棒显微结构分类

Implants for surgery－Metallic materials－Classification of microstructures for alpha+beta titanium alloy   bars

KS P ISO 16840-4-2011

临床实验室试验和体外诊断试验系统传染源药敏试验和抗菌药敏试验装置性能评价第1部分：抗菌剂体外抗感染性疾病中快速生长的需氧菌活性试验的参考方法

Clinical laboratory testing and in vitro   diagnostic test systems－Susceptibility   testing of infectious agents and evaluation of performance of antimicrobial   susceptibility test devices－Part 1：Reference method for testing the in vitro activity of antimicrobial   agents against rapidly growing aerobic bacteria involved in infectious   diseases

KS P ISO 16840-6-2017

临床实验室试验和体外诊断试验系统传染源药敏试验和抗菌药敏试验装置性能评价第2部分：抗菌药敏试验装置性能评价

Clinical laboratory testing and in vitro   diagnostic test systems－Susceptibility   testing of infectious agents and evaluation of performance of antimicrobial   susceptibility test devices－Part 2：Evaluation of performance of antimicrobial susceptibility test   devices

KS P ISO 17190-1-2011

牙科学－基聚合物－第1部分：义齿基聚合物

Dentistry－Base polymers－Part 1：Denture base polymers

KS P ISO 17190-2-2011

牙科学－基础聚合物－第2部分：正畸基础聚合物

Dentistry－Base polymers－Part 2：Orthodontic base polymers

KS P ISO 21530-2018

牙科学.牙科设备表面用材料.耐化学消毒剂的测定

Dentistry — Materials used for dental equipment surfaces — Determination of resistance to chemical disinfectants

KS P ISO 21531-2014

牙科学牙科仪器用图形符号

Dentistry－Graphical symbols for dental instruments

KS P ISO 21533-2017

牙科.韧带内注射用可重复使用的管式注射器

Dentistry－Reusable cartridge syringes intended for   intraligamentary injections

KS P ISO 21534-2009

非活性外科植入物.关节替代用植入物.特殊要求

Non－active surgical implants－Joint replacement   implants－Particular requirements

KS P ISO 21535-2017

非活性外科植入物.关节替代用植入物.髋关节替代用植入物的特殊要求

Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants

KS P ISO 21536-2009

非活性外科植入物.关节替代用植入物.膝关节替代用植入物的特殊要求

Non-active surgical implants－Joint replacement implants－Specific requirements for knee-joint replacement implants

KS P ISO 2157-2009

牙科旋转器械.公称直径和命名代码

Dental rotary instruments－Nominal diameters and designation   code number

KS P ISO 21606-2009

牙科学－正畸用弹性辅助材料

Dentistry－Elastomeric auxiliaries for use in orthodontics

KS P ISO 21647-2010

医用电气设备呼吸气体监测仪基本安全和基本性能专用要求

Medical electrical equipment－Particular requirements for the basic   safety and essential performance of respiratory gas monitors

KS P ISO 21671-2009

牙科旋转抛光机

Dentistry－Rotary polishers

KS P ISO 17190-3-2011

牙科学.牙周探头.第1部分：一般要求

Dentistry — Periodontal probes — Part1:   General requirements

KS P ISO 17190-4-2011

牙科学.牙周探头.第2部分：名称与符号

Dentistry — Periodontal probes — Part 2:   Designation

KS P ISO 22112-2009

牙科学人工牙修复术

Dentistry－Artificial teeth for dental prostheses

KS P ISO 22254-2014

牙科学.手动牙刷.簇状部分抗偏转性

Dentistry — Manual toothbrushes —   Resistance of tufted portion to deflection

KS P ISO 22374-2014

牙科－牙科手机－电动刮除器和刮除器头

Dentistry－Dental handpieces－Electrical-powered   scalers and scaler tips

KS P ISO 17190-5-2011

使用动物组织及其衍生物的医疗器械.第1部分：风险管理的应用

Medical devices utilizing animal tissues   and their derivatives —   Part 1: Application of risk management

KS P ISO 17190-6-2011

利用动物组织及其衍生物的医疗器械.第2部分：采购、收集和搬运的控制

Medical devices utilizing animal tissues   and their derivatives —   Part 2: Controls on sourcing, collection and handling

KS P ISO 17190-7-2011

利用动物组织及其衍生物的医疗器械第3部分：病毒和传染性海绵状脑病（TSE）药剂的消除和/或灭活的验证

Medical devices utilizing animal tissues   and their derivatives－Part   3：Validation of the elimination and/or inactivation   of viruses and transmissible spongiform encephalopathy(TSE) agents

KS P ISO 22523-2016

外部假肢修复和外部矫形器.要求和试验方法

External limb prostheses and external   orthoses — Requirements and test   methods

KS P ISO 22674-2009

牙科固定和可移动修复和器具用金属材料

Dentistry－Metallic materials for fixed and removable   restorations and appliances

KS P ISO 22675-2016

修复术.踝足装置和足部装置的试验.要求和试验方法

Prosthetics — Testing of ankle-foot devices and foot units — Requirements and test methods

KS P ISO 22794-2009

牙科学－口腔颌面外科中用于骨填充和增强的可植入材料－技术文件的内容

Dentistry－Implantable materials for bone filling and   augmentation in oral and maxillofacial surgery－Contents   of a technical file

KS P ISO 22803-2013

牙科学口腔颌面外科引导组织再生用膜材料技术文件的内容

Dentistry－Membrane materials for guided tissue regeneration in   oral and maxillofacial surgery－Contents of a   technical file

KS P ISO 22870-2009

护理点测试（POCT）——质量和能力要求

Point-of-care testing(POCT)－Requirements for quality and   competence

KS P ISO 23317-2009

外科植入物植入材料磷灰石形成能力的体外评价

Implants for surgery－In vitro evaluation for   apatite-forming ability of implant materials

KS P ISO 17190-8-2011

麻醉和呼吸用呼吸系统过滤器.第2部分:非过滤特性

Breathing system filters for anaesthetic   and respiratory use－Part   2：Non-filtration aspects

KS P ISO 23600-2011

视力障碍者和视力、听力障碍者辅助产品行人交通信号灯的声音和触觉信号

Assistive products for persons with vision   impairments and persons with vision and hearing impairments－Acoustic and tactile signals for   pedestrian traffic lights

KS P ISO 23640-2013

体外诊断医疗器械.体外诊断试剂稳定性评价

In vitro diagnostic medical devices — Evaluation of stability of in vitro   diagnostic reagents

KS P ISO 24214-2016

造口辅助设备用皮肤屏障.词汇

Skin barrier for ostomy aids — Vocabulary

KS P ISO 24234-2014

牙科学.牙科汞齐合金用汞及合金

Dentistry－Mercury and alloys for dental amalgam

KS P ISO 17190-9-2011

步行辅助用品提示要求和试验方法第1部分：提示摩擦

Tips for assistive products for walking－Requirements and test methods－Part 1：Friction of tips

KS P ISO 17510-1-2009

步行辅助用品提示要求和试验方法第2部分：拐杖提示耐久性

Tips for assistive products for walking－Requirements and test methods－Part 2：Durability of tips for crutches

KS P ISO 17510-2-2009

心血管植入物.血管内装置.第1部分：血管内修复

Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses

KS P ISO 17665-1-2008

心血管植入物血管内装置第2部分：血管支架

Cardiovascular implants－Endovascular devices－Part 2：Vascular stents

KS P ISO 27020-2018

牙科学.正畸学用支架和管

Dentistry — Brakets and tubes for use in orthodontics

KS P ISO 28158-2017

牙科学综合牙线和手柄

Dentistry－Integrated dental floss and handles

KS P ISO 28319-2017

牙科－激光焊接

Dentistry－Laser welding

KS P ISO 28399-2013

牙科学.外部牙齿漂白用产品

Dentistry — Products for external tooth bleaching

KS P ISO 18113-1-2018

修复术和矫形学.词汇.第2部分：修复步态

Prosthetics and orthotics — Vocabulary —   Part 2: Prosthetics gait

KS P ISO 3107-2014

牙科学.氧化锌/丁香酚粘合剂和氧化锌/非丁香酚粘合剂

Dentistry — Zinc oxide/eugenol cements and zinc oxide/non-eugenol   cements

KS P ISO 3630-1-2012

牙科学牙根管器械第1部分：一般要求和试验方法

Dentistry－Root-canal instruments－Part 1：General requirements and test methods

KS P ISO 3630-2-2004

牙根管器械第2部分：扩张器

Dental root-canal instruments－Part 2：Enlargers

KS P ISO 3630-3-2012

牙根管器械第3部分：冷凝器、充填器和扩张器

Dental root-canal instruments－Part 3：Condensers,   pluggers and spreaders

KS P ISO 3630-4-2017

牙科牙根管器械第4部分：辅助器械

Dentistry－Root canal instruments－Part 4：Auxiliary instruments

KS P ISO 3630-5-2013

牙科学.牙髓器械.第5部分：成形和清洁器械

Dentistry — Endodontic instruments — Part   5: shaping and cleaning instruments

KS P ISO 3665-2008

摄影.牙科用射线照相胶片.规范

Photography－Intra-oral dental radiographic film－Specification

KS P ISO 3823-1-2013

牙科旋转器械牙钻第1部分：钢制牙钻和硬质合金牙钻

Dental rotary instruments－Burs－Part 1：Steel and carbide burs

KS P ISO 3823-2-2012

牙科旋转牙钻器械第2部分：精加工牙钻

Dentistry－Rotary bur instruments－Part 2：Finishing burs

KS P ISO 3950-2008

牙科学牙齿和口腔区域的命名系统

Dentistry－Designation system for teeth and areas of the oral   cavity

KS P ISO 4049-2017

牙科学.聚合物基修复材料

Dentistry — Polymer-based restorative materials

KS P ISO 4073-2017

牙科设备.牙科治疗室设备项目.识别体系

Dentistry－Information system on the location of dental equipment   in the working area of the oral health care provider

KS P ISO 4135-2014

麻醉和呼吸设备.词汇

Anaesthetic and respiratory equipment — Vocabulary

KS P ISO 4823-2013

牙科弹性印模材料

Dentistry－Elastomeric impression materials

KS P ISO 5356-1-2009

麻醉和呼吸设备圆锥形连接器第1部分：锥体和插孔

Anaesthetic and respiratory equipment－Conical connectors－Part 1：Cones and sockets

KS P ISO 5356-2-2009

麻醉和呼吸设备锥形连接器第2部分：螺纹承重连接器

Anaesthetic and respiratory equipment－Conical connectors－Part 2：Screw-threaded weight-bearing connectors

KS P ISO 5358-2010

人用麻醉机

Anaesthetic machines for use with humans

KS P ISO 5361-2017

麻醉和呼吸设备气管导管和连接器

Anaesthetic and respiratory equipment－Tracheal tubes and connectors

KS P ISO 5362-2012

麻醉剂储存袋

Anaesthetic reservoir bags

KS P ISO 5364-2009

麻醉和呼吸设备.口咽通气管

Anaesthetic and respiratory equipment－Oropharyngeal airways

KS P ISO 5366-1-2009

麻醉和呼吸设备气管造口术用导管第1部分：成人用导管和连接器

Anaesthetic and respiratory equipment－Tracheostomy tubes－Part 1：Tubes and connectors for use in   adults

KS P ISO 5366-3-2009

麻醉呼吸设备气管造口管第3部分：小儿气管造口管

Anaesthetic and respiratory equipment－Tracheostomy tubes－Part 3：Paediatric tracheostomy tubes

KS P ISO 5367-2009

麻醉机和通气机连用的呼吸管

Breathing tubes intended for use with   anaesthetic apparatus and ventilators

KS P ISO 5799-2008

摄影.医用和牙科用直接爆光射线摄影胶片/处理系统.ISO感光速度和ISO平均梯度的测定

Photography－Direct-exposing medical and dental radiographic   film/process systems－Determination of ISO speed and   ISO average gradient

KS P ISO 5832-1-2012

外科植入物金属材料第1部分：锻制不锈钢

Implants for surgery－Metallic materials－Part 1：Wrought stainless steel

KS P ISO 18113-3-2015

外科植入物金属材料第11部分：钛6铝7铌合金

Implant for surgery－Metallic materials－Part 11：Wrought titanium 6-aluminium   7-niobium alloy

KS P ISO 18113-4-2015

外科植入物金属材料第12部分：可锻钴铬钼合金

Implants for surgery－Mrtallic materials－Part 12：Wrought cobalt-chromium-molybdenum   alloy

KS P ISO 18113-5-2015

外科植入物金属材料第14部分：钛15钼5锆3铝合金

Implants for surgery－Metallic materials－Part 14：Wrought titanium 15-molybdenum   5-zirconium 3-aluminium alloy

KS P ISO 5832-2-2007

外科植入物金属材料第2部分：非合金钛

Implants for surgery－Metallic materials－Part 2：Unalloyed titanium

KS P ISO 5832-3-2007

外科材料金属材料第3部分：钛6-铝4-钒变形合金

Imlants for surgery－Metallic materials－Part 3：Wrought titanium 6-aluminium   4-vanadium alloy

KS P ISO 5832-4-2007

外科植入物金属材料第4部分：钴铬钼铸造合金

Implants for surgery－Metallic materials－Part 4：Cobalt-chromium-molybdeum casting   alloy

KS P ISO 5832-5-2007

外科植入物金属材料第5部分：可锻钴铬钨镍合金

Implants for surgery－Metallic materials－Part 5：Wrought   cobaltchromium-tungsten-nickel alloy

KS P ISO 5832-6-2007

外科植入物金属材料第6部分：可锻钴镍铬钼合金

Implants for surgery－Metallic materials－Part 6：Wrought   cobalt-nickel-chromium-molybdenum alloy

KS P ISO 5832-7-2007

外科植入物金属材料第7部分：可锻和冷成形钴铬镍钼铁合金

Implants for surgery－Metallic materials－Part 7：Forgeable and cold-formed cobalt-chromium-nickel-molybdenm-iron   alloy

KS P ISO 5832-8-2007

外科植入物金属材料第8部分：可锻钴镍铬钼钨铁合金

Implants for surgery－Metallic materials－Part 8：Wrought   cobaltnickel-chromium-molybdenum-tungsten-iron alloy

KS P ISO 5832-9-2012

外科植入物金属材料第9部分：锻制高氮不锈钢

Implants for surgery－Metallic materials－Part 9：Wrought high nitrogen stainless   steel

KS P ISO 5833-2012

外科植入物丙烯酸树脂粘合剂

Implants for surgery－Acrylic resin cements

KS P ISO 5834-1-2007

外科植入物超高分子量聚乙烯第1部分：粉末状

Implants for surgery－Ultra-high-molecular-weight   polyethylene－Part 1：Powder   form

KS P ISO 5834-2-2012

外科植入物超高分子量聚乙烯第2部分：成型模

Implants for surgery－Ultra-high molecular weight   polyethylene－Part 2：Moulded   forms

KS P ISO 5834-3-2008

外科植入物超高分子量聚乙烯第3部分：加速老化法

Implants for surgery－Ultra-high-molecular-weight   polyethylene－Part 3：Accelerated   ageing methods

KS P ISO 5834-4-2007

外科植入物超高分子量聚乙烯第4部分：氧化指数测量方法

Implants for surgery－Ultra-high molecular weight   polyethylene－Part 4：Oxidation   index measurement method

KS P ISO 5834-5-2007

外科植入物超高分子量聚乙烯第5部分：形态评定方法

Implants for surgery－Ultra-high-molecular-weight   polyethylene－Part 5：Morphology   assessment method

KS P ISO 5835-2008

外科植入物.六角传动连接的非对称螺纹球形头下金属骨螺钉.尺寸

Implants for surgery－Metal bone screws with hexagonal   drive connection, spherical under-surface of head, asymmetrical thread－Dimensions

KS P ISO 5836-2010

外科植入物－金属骨板－与具有不对称螺纹和球形下表面的螺钉相对应的孔

Implants for surgery－Metal bone plates－Holes corresponding to screws with asymmetrical thread and   spherical under-surface

KS P ISO 5837-1-2010

外科植入物.髓内钉系统.第1部分：立体或V形截面的髓内钉

Implants for surgery－Intramedullary nailing systems－Part 1：Intramedullary nails with   cloverleaf or V-shaped cross-section

KS P ISO 5837-2-2010

外科植入物.髓内钉系统.第2部分：髓内钉

Implants for surgery－Intramedullary nailing systems－Part 2：Medullary pins

KS P ISO 5838-1-2009

外科植入物骨骼销和骨架丝第1部分：材料和机械要求

Implants for surgery－Skeletal pins and wires－Part 1：Material and mechanical requirements

KS P ISO 5838-2-2010

外科植入物骨骼销和骨架线第2部分：斯坦曼骨骼销尺寸

Implants for surgery－Skeletal pins and wires－Part 2：Steinmann skeletal pins－Dimensions

KS P ISO 5838-3-2010

外科植入物.骨骼针和骨骼线.第3部分：克什纳骨骼线

Implants for surgery－Skeletal pins and wires－Part 3：Kirschner skeletal wires

KS P ISO 5840-2007

心血管植入物－心脏瓣膜假体

Cardiovascular implants－Cardiac valve prostheses

KS P ISO 5841-2-2012

外科植入物心脏起搏器第2部分：脉冲发生器或导联人群临床性能报告

Implants for surgery－Cardiac pacemakers－Part 2：Reporting of clinical performance   of populations of pulse generators or leads

KS P ISO 5841-3-2012

外科植入物心脏起搏器第3部分：可植入起搏器用低断面连接器（IS-1）

Implants for surgery－Cardiac pacemakers－Part 3：Low-profile connectors(IS-1) for   implantable pacemakers

KS P ISO 595-1

医用可重复使用的全玻璃或金属玻璃注射器第1部分：尺寸

Reusable all-glass or metal-and-glass   syringes for medical use－Part 1：Dimensions

KS P ISO 595-2

医用可重复使用的全玻璃或金属玻璃注射器第2部分：设计、性能要求和试验

Reusable all-glass or metal-and-glass   syringes for medical use－Part 2：Design, performance requirements   and tests

KS P ISO 6161-2017

个人用护目镜.防激光辐射的滤光镜和护目镜

Personal eye-protectors — Filters and eye-protectors against   laser radiation

KS P ISO 6360-1-2009

牙科.旋转器械的数字编码系统.第1部分：一般特性

Dentistry－Number coding system for rotary instruments－Part 1：General characteristics

KS P ISO 6360-2-2009

牙科旋转器械编号规则第2部分：形状

Dentistry－Number coding system for rotary instruments－Part 2：Shapes

KS P ISO 6360-3-2009

牙科学旋转器械的数字编码系统第3部分：牙钻和切割器的特殊特性

Dentistry－Number coding system for rotary instruments－Part 3：Specific characteristics of burs   and cutters

KS P ISO 6360-4-2009

牙科旋转器械的数字编码系统第4部分：金刚石器械的特殊特性

Dentistry－Number coding system for rotary instruments－Part 4：Specific characteristics of diamond   instruments

KS P ISO 6360-5-2009

牙科旋转器械的数字编码系统第5部分：根管器械的特殊特性

Dentistry－Number coding system for rotary instruments－Part 5：Specific characteristics of   root-canal instruments

KS P ISO 6360-6-2009

牙科旋转器械的数字编码系统第6部分：磨具的特殊特性

Dentistry－Number coding system for rotary instruments－Part 6：Specific characteristics of   abrasive instruments

KS P ISO 6360-7-2009

牙科旋转器械的数字编码系统第7部分：芯轴和专用器械的特殊特性

Dentistry－Number coding system for rotary instruments－Part 7：Specific characteristics of   mandrels and special instruments

KS P ISO 6474-2009

外科植入物高纯氧化铝陶瓷材料

Implants for surgery－Ceramic materials based on high   purity alumina

KS P ISO 6475-2010

外科植入物.不对称螺纹和球形下表面的金属接骨螺钉.机械性能要求和试验方法

Implants for surgery－Metal bone screws with asymmetrical   thread and spherical under-surface－Mechanical   requirements and test methods

KS P ISO 6710-2009

一次性使用静脉血样采集容器

Single-use containers for venous blood   specimen collection

KS P ISO 6872-2009

牙科陶瓷材料

Dentistry－Ceramic materials

KS P ISO 6873-2014

牙科.石膏制品

Dentistry — Gypsum products

KS P ISO 6874-2009

牙科用聚合物基坑缝密封剂

Dentistry－Polymer-based pit and fissure sealants

KS P ISO 6876-2014

齿根管密封材料

Dentistry — Root canal sealing materials

KS P ISO 6877-2013

牙科学牙根管充填点

Dentistry－Root-canal obturating points

KS P ISO 7151-2008

外科器械.非切割铰接器械.一般要求和试验方法

Surgical instruments－Non-cutting, articulated instruments－General requirements and test methods

KS P ISO 7153-1-2018

外科器械材料第1部分：金属

Surgical instruments ─ Materials ─   Part1: Metals

KS P ISO 7176-1-2018

轮椅.第1部分：静态稳定性的测定

Wheelchairs－Part 1：Determination of static   stability

KS P ISO 18192-1-2009

轮椅第10部分：电动轮椅爬障碍能力的测定

Wheelchairs－Part 10：Determination of   obstacle-climbing ability of electrically powered wheelchairs

KS P ISO 20776-1-2009

轮椅.第11部分：试验假人

Wheelchairs－Part 11：Test dummies

KS P ISO 20776-2-2009

轮椅第13部分：试验表面摩擦系数的测定

Wheelchairs－Part 13：Determination of   coefficient of friction of test surfaces

KS P ISO 20795-1-2014

轮椅.第14部分：电动轮椅和踏板车的动力和控制系统.要求和试验方法

Wheelchairs — Part 14: Power and control systems for electrically   powered wheelchairs and scooters — Requirements and   test methods

KS P ISO 20795-2-2011

轮椅第15部分：信息披露、文件编制和标签要求

Wheelchairs－Part 15：Requirements for   information disclosure, documentation and labelling

KS P ISO 21672-1-2018

轮椅.第16部分：姿势支撑装置的耐点燃性

Wheelchairs — Part 16: Resistance to ignition of postural support   devices

KS P ISO 21672-2-2018

轮椅.第19部分：汽车座椅用轮式移动装置

Wheelchairs — Part 19: Wheeled mobility devices for use as seats in   motor vehicles

KS P ISO 7176-2-2011

轮椅第2部分：电动轮椅动态稳定性的测定

Wheelchairs－Part 2：Determination of   dynamic stability of electric wheelchairs

KS P ISO 22442-1-2017

轮椅第21部分：电动轮椅、摩托车和蓄电池充电器的电磁兼容性要求和试验方法

Wheelchairs－Part 21：Requirements and test   methods for electromagnetic compatibility of electrically powered wheelchairs   and scooters, and battery chargers

KS P ISO 22442-2-2017

轮椅.第22部分：设置程序

Wheelchairs — Part 22: Set-up procedures

KS P ISO 24415-1-2011

轮椅第25部分：电动轮椅用蓄电池和充电器

Wheelchairs ─ Part 25: Batteries and chargers for powered   wheelchairs

KS P ISO 24415-2-2012

轮椅.第26部分：词汇

Wheelchairs－Part 26：Vocabulary

KS P ISO 7176-3-2017

轮椅.第3部分：制动器效能的测定

Wheelchairs－Part 3：Determination of   effectiveness of brakes

KS P ISO 7176-4-2018

轮椅.第4部分：理论距离范围测定用电动轮椅和踏板车的能耗

Wheelchairs — Part 4: Energy consumption of electric wheelchairs   and scooters for determination of theoretical distance range

KS P ISO 7176-5-2011

轮椅第5部分：尺寸、质量和操纵空间的测定

Wheelchairs－Part 5：Determination of   dimensions,mass and manoeuvring space