KS W 0117-1993

航空术语(航空器电器及照明系统)

Glossary of terms for aircraft electrical   and lighting systems

KS W 0811-2004

航空设备环境试验方法

Environmental test methods for aerospace   equipment

KS W 0928-2003

航空航天.流体动力系统.液压软管、管道和总成的冲击试验

Aerospace－Fluid systems－Impulse testing   of hydaulic hose,tubing and fitting assemblies

KS W 0929-1998

航空航天.自锁浮动式有沉孔的mj螺纹单耳固定螺母.等级:1100mpa(室温)/235℃、1100mpa(室温)/315℃和1100mpa(室温)/425℃.尺寸

Aerospace - Nuts, anchor, self-locking,   floating, two-lug with counterbore, with MJ threads, coated or uncoated   classification 1100MPa/235 degrees C, 1100MPa/315 degrees C or 1100MPa/425   degrees C­Dimensions

KS W 0930-1998

航空航天.强度等级小于或等于1100mpa的涂覆或不涂覆的内偏置十字形肋驱动大柱头mj全螺纹金属螺钉.尺寸

Aerospace-Screws, pan head, internal offset   cruciform ribbed or unribbed drive, threaded to head,MJ threads metallic   material, coated or uncoated, strength classes less than or equal to 1100MPa­Dimensions

KS W 0931-1998

航空航天.强度等级小于或等于1100mpa,有涂层或无涂层,短长度或中长度mj螺纹的,由金属材料制成的,普通12角螺栓头,普通螺栓体的铆钉尺寸

Aerospace-Bolts, normal hexagonal head,   normal shank, short or medium length MJ threads, metallic material, coated or   uncoated strength classes less than or equal to 1100MPa-Dimensions

KS W 0933-1998

航空航天.平底锪孔,固定自锁式系紧螺,强度类别1100mpa/235℃

Aerospace -Self-locking, fixed, single-lug   anchor nuts with counterbore, classification 1100MPa/235 degrees C

KS W 1115-2014

航空航天.耐蚀钢的钝化处理

Passivation treatments for   corrosion-resisting steel of aerospace use

KS W 1120-2016

航空航天工艺铝合金化学转化涂层一般用途

Aerospace process－Chemical conversion coatingfor   aluminium alloys－General purpose

KS W 1123-1995

飞机镀铬（电沉积）

Chromium plating(electrodeposited) for   aircraft

KS W 1128-1995

航空航天.可淬硬的不锈钢零件表面处理

AEROSPACE-SURFACE TREATMENT OF HARDENABLE   STAINLESS STEEL PARTS

KS W 1129-1995

航空航天.锻铝和铝合金.验收试验和交货要求.第1部分:一般要求

Aerospace-Wrought aluminium and aluminium   alloys-Inspection,testing and supply requirements-Part 1 : General   requirements

KS W 1130-2002

航空航天.铝合金的阳极处理.非染色涂层的硫酸工艺规程

Aerospace process－Anodic treatment of aluminium alloys－Sulfuric acid process, undyed coating

KS W 1131-2002

航空航天.铝合金的阳极处理.硫酸工艺法处理着色涂层

Aerospace process－Anodic treatment of aluminium alloys－Sulfuric acid process, dyed coating

KS W 1136-2007

飞机用耐腐蚀钢.钢棒、线材和锻造品

Aerospace－Steel corrosion－resistant(18－8) bars, wire and forging stock

KS W 1137-2007

飞机用拉链合金钢

Aerospace－Alloy steels for application fastener materials

KS W 1138-2012

飞机用铝及铝合金阳极处理覆膜

Anodic coatings on aluminium and aluminium   alloys for aircraft

KS W 1139-2007

飞机用镉电镀层

Plating cadmium(electrodeposited) for   aircraft

KS W 1140-2007

铝及铝合金化学转化膜

Chemical conversion coatings on aluminum   and aluminum alloys

KS W 1161-2007

阳极处理－钛及钛合金－溶液pH 13或更高

Anodic treatment－Titanium and titanium alloy－Solution pH 13 or higher

KS W 1162-2007

钛及钛合金的热处理

Heat treatment of titanium and titanium   alloys

KS W 1201-2007

航空航天－钛合金棒材、线材、锻件、环形件和拉制型材6Al－4V退火、热处理

Aerospace－Titanium alloy bars, wire, forgings, rings, and drawn   shapes 6Al－4V annealed, heat treatable

KS W 1501-2002

航空航天.热处理低合金钢螺栓

Aerospace－Heat treated low alloy steel bolts

KS W 1502-2018

航空航天.耐热低合金螺栓

Aerospace－Heat resistant low alloy bolts

KS W 1503-2007

航空航天.耐疲劳、耐热、耐腐钢螺栓

Aerospace－Fatigue, corrosion and heat resistant bolts

KS W 1504-2002

航空航天.蠕变断裂,耐热、耐腐螺栓

Aerospace－Creep-rupture, corrosion and heat resistant bolts

KS W 1505-2002

航空航天.航空器用螺栓

Aerospace－Aircraft bolts

KS W 1506-2002

航空航天.6角头孔洞头部螺栓

Aerospace－Internal wrenching bolts

KS W 1507-2018

航空航天.前端螺栓

Aerospace－Shear bolts

KS W 1508-2018

航空航天.合金钢螺栓

Aerospace－Alloy steel bolts

KS W 1511-1989

飞机嵌环和锁紧卡环

Thimble and Shackle for Aircraft

KS W 1556-2018

飞机导管和管系.V形截面凸缘管接头的外形尺寸

Aircraft ducting and piping — Profile dimensions for flanges of   V-band couplings

KS W 1557-2003

航空航天.前端“＋”字槽螺钉

Aerospace－Shear, cross recessed head screws

KS W 1558-2003

航空航天.飞机救助用“＋”字槽螺钉

Aerospace－Aircraft structural cross recessed head screws

KS W 1609-2018

航空航天-攻丝和传动螺钉

Aerospace – Tapping and Drive Screws

KS W 1611-2004

航空航天.锯齿型环形闭锁柱头螺栓

Aerospace－Serrated Ring Locked Stud

KS W 1612-2004

航空航天.凹凸槽肩部垫圈

Aerospace－Recessed shouldered washer

KS W 1613-2004

航空航天.滚球和轴承栓垫圈

Aerospace－Ball and roller bearings key retaing washer

KS W 1614-2016

航空航天.双辐平垫圈

Aerospace－Flat(burr) washer

KS W 1617-2004

航空航天.仪器用阀弹簧螺母

Aerospace－Instrument mounting sheet spring nut

KS W 1618-2004

6角凸轮槽槽形螺母

Aerospace－Hexagon, cap, slotted, castle nut

KS W 1621-2004

插头盖螺钉

Aerospace－Socket head cap screw

KS W 1622-2004

自锁螺母

Aerospace－Self－Locking nut

KS W 1624-2004

航空航天.六角锁紧螺母

Aerospace－Prevailing torque hexagon self-locking nut

KS W 1625-2004

弹簧闭锁垫圈

Aerospace－Spring lock washer

KS W 1629-2004

镍－铜合金6角防脱螺母

Aerospace－Nickel-copper alloy heavy hex self-locking nut

KS W 1630-2005

普通小型固体铆钉、小型分割铆钉、小型管铆钉

Small solid rivet, small split rivet, small   tubular rivet

KS W 1631-2007

带拔销缩小型护圈

Tapered and reduced section type retaining   rings

KS W 1632-2005

螺旋形压缩伸张弹簧

Compression and extension helical springs

KS W 1633-2005

U形夹和开尾销

Clevis pins and cotter pins(Inch series)

KS W 1636-2005

线圈和槽冠形弹簧栓

Coiled and slotted tubular spring pin

KS W 1638-2005

长槽无头栓

Longitudinal groove headless pin

KS W 1639-2005

无头直线栓

Headless(DOWEL) straight pin

KS W 1640-2005

润滑型双臂曲柄滚珠轴承

Antifriction bellcrank ball bearings

KS W 1701-2002

航空航天.耐腐蚀钢栓和螺钉

Aerospace－Corrosion resistant steel bolt and screws

KS W 1702-2002

航空航天.钛合金螺栓和螺钉

Aerospace－Titanium alloy bolts and screws

KS W 1703-2002

航空航天.合金钢螺栓和螺钉

Aerospace－Alloy steel bolt and screws

KS W 1704-2002

航空航天.飞机结构用螺钉类

Aerospace－Aircraft structural screws

KS W 1705-2002

航空航天.耐疲劳性、耐热、耐腐蚀钢栓和螺钉

Aerospace－Tensile strength 897MPa(130ksi) steel bolts and screws

KS W 1706-2002

航空航天.低合金钢螺栓和螺钉

Aerospace－Roll threaded heat treated low alloy steel bolt and   screws

KS W 1711-2002

航空航天.耐腐蚀钢栓和螺钉

Aerospace-Corrosion resistant steel bolts   and screws

KS W 1712-2002

航空航天.耐热硬化低合金钢栓和螺钉

Aerospace－Hardened and tempered low alloy steel bolts and screws

KS W 1830-2007

飞机高压、油压软管

Hose, hydraulic, high pressure

KS W 1831-2018

飞机高压、油压软管接头

Aircraft ducting and piping — Profile dimensions for flanges of   V-band couplings

KS W 1833-2018

飞机中压橡胶软管（液压、燃料和润滑油用）

Hose, rubber, hydraulic, fuel and oil   resistant

KS W 1835-2018

飞机中压橡胶软管组件（液压、燃料和润滑油用）

Hose assemblies, rubber, hydraulic, fuel   and oil resistant

KS W 1925-2000

飞机双列连杆端滚珠轴承

Double-row rod end ball bearing for   aircraft

KS W 1926-2000

自锁系紧连杆端滚珠轴承

Self-aligning rod end roller bearing for   aircraft

KS W 2019-2011

航空航天电线捆包和避雷防护

Bonding, electrical, and lightning   protection, for aerospace systems

KS W 2511-2016

飞机轮胎用橡胶管

Rubber tubes for aircraft tires

KS W 5011-1999

机场嵌入式照明设备

INSET LIGHT FOR AIRPORT

KS W 5021-1993

机场暴露式跑道灯和滑行道灯

Elevated runway edge and taxiway edge light   airport

KS W 5031-1993

机场暴露式进近航道灯、跑道开端灯、末端延长灯、终端灯

Elevated approach, runway threshold/wing   bar/end light for airport

KS W 5041-1999

机场闪光灯

Flashing light for airport

KS W 5051-1993

精密进近航道指示器

Precision approach path indicator

KS W 5061-1993

机场灯塔

Aerodrome beacon

KS W 5071-1993

风向指示灯

Wind direction indicator

KS W 5081-1993

着陆方向指示灯

Landing direction indicator

KS W 5091-2014

恒流调节器

Constant current regulators

KS W 5092-2003

飞机用交流发电机电压调整器

AC generators and associated regulators for   aircraft

KS W 5111-2016

绝缘变压器

ISOLATED TRANSFORMERS

KS W 7205-1990

飞机内时间分隔控制/反映多元数据总线

Aircraft Internal Time Division Command /   Response Multiplex Data Bus

KS W 7214-1987

飞机电器、电子设备的钎焊方法

Method of Soldering for Aircraft Electrical   and Electronic Equipments

KS W 8311-2016

导航用地面照明和表面标志颜色

Aeronautical ground light and surface   marking colours

KS W 9000-2016

无人机系统第1部分：分类和定义

Unmanned aircraft systems — Part 1: Classification and   definition

KS W 9001-2018

无人机系统.第1部分：无人机的设计和试验

Unmanned aircraft systems — Part 1:Design and Testing for UAV

KS W 9131-2018

无人机系统部件第2部分：螺旋桨的设计和试验

Unmanned aircraft system compoments — Part 2: Design and Testing for   Propeller

KS W 9132-2018

无人驾驶飞机系统部件.第1部分：电池的设计和维护

Unmanned aircraft system components — Part 1: Design and Maintenance for   Batteries

KS W ISO 1002-2004

滚动轴承.飞机机架轴承.特性、外形尺寸、公差、额定静载荷

Rolling bearings－Airframe bearings－Characteristics, boundary dimensions, tolerances, static load   ratings

KS W ISO 1023-2002

航空器.高压空气充气阀

Aircraft－High pressure air charging valves

KS W ISO 10327-2018

航空货物用经认证的航空集装箱规范和试验

Specification and testing of certified   aircraft container for air cargo

KS W ISO 10955-2016

航空航天.航空器操纵钢丝绳用末端接头和松紧套筒.技术规范

Aerospace－End-fittings and turnbarrels for aircraftcontrol wire   rope－Technical specification

KS W ISO 11242-2018

航空货运集装箱均压要求

Pressure equalization requirements   containers for air cargo containers

KS W ISO 12334-2002

航空航天.带压力补偿的变流量液压泵.35000kPa系统的一般要求

Aerospace－Hydraulic, pressure compensated, variable delivery   pumps－ General requirements for 35 000 kPa systems

KS W ISO 13411-2016

航空航天.飞机结构用滚针、滚柱和滚道式滚子轴承.技术规范

Aerospace－Airframe needle roller, cylindrical roller andtrack   roller bearings－Technical specification

KS W ISO 13412-2016

航空航天.飞机结构用轭型单列密封的滚针滚道式滚子.英制系列

Aerospace－Airframe needle track roller,yoke type, single-row,   sealed－Inch series

KS W ISO 13413-2016

航空航天.飞机结构用轭型、双列密封的滚针滚道式滚子.英制系列

Aerospace－Airframe needle track roller,yoke type, double-row,   sealed－Inch series

KS W ISO 13414-2016

航空航天.飞机结构用带档边的单列滚针轴承.英制系列

Aerospace－Airframe needle roller bearings,single-row, shielded－Inch series

KS W ISO 13415-2016

航空航天.飞机结构用柱型单列密封的滚针滚道式滚子.英制系列

Aerospace－Airframe needle track roller,stud type, single-row,   sealed－Inch series

KS W ISO 13416-2016

航空航天.飞机结构用轭型单列密封的滚针滚道式滚子.米制系列

Aerospace－Airframe needle track roller,yoke type, single-row,   sealed－Metric series

KS W ISO 14190-2016

航空航天.飞机结构用滚动轴承:滚珠和球面滚子轴承.技术规范

Aerospace－Airframe rolling bearings：ball   andspherical roller bearings－Technical specification

KS W ISO 14193-2004

航空航天.飞机结构用中等负荷扩展内圈单列自位密封球面滚子轴承.英制系列

Aerospace－Airframe spherical roller bearings,   single-row,self-aligning, sealed, extended inner ring,intermediate duty－Inch series

KS W ISO 14194-2004

航空航天.飞机结构用重负荷扩展内圈自位双列密封球面滚子轴承.英制系列

Aerospace－Airframe spherical roller bearings, double-row,self-aligning,   sealed, extended inner ring, heavy duty－Inch series

KS W ISO 14195-2004

航空航天.飞机结构用轻负荷扭力管设计的自位双列密封球面滚子轴承.英制系列

Aerospace－Airframe spherical rollerbearings, double-row,   self-aligning, sealed,torque tube design, light duty－Inch   series

KS W ISO 14196-2004

航空航天.飞机结构用重负荷普通内圈自位双列密封球面滚子轴承.英制系列

Aerospace－Airframe spherical roller bearings, double-row,   self-aligning, sealed, plain inner ring, heavy duty－Inch   series

KS W ISO 14197-2004

航空航天.飞机结构用中等负荷自位单列密封球面滚子轴承.英制系列

Aerospace－Airframe spherical roller bearings,   single-row,self-aligning, sealed, intermediate duty－Inch   series

KS W ISO 14206-2004

航空航天.飞机结构用轻负荷单列刚性密封球轴承.英制系列

Aerospace－Airframe ball bearings,single-row, rigid, sealed,   light duty－Inch series

KS W ISO 14207-2004

航空航天.飞机结构用轻负荷密封精密单列刚性球轴承.英制系列

Aerospace－Airframe ball bearings, single-row,rigid, precision,   sealed, light duty－Inch series

KS W ISO 14208-2004

航空航天.飞机结构用中等负荷密封单列刚性球轴承.英制系列

Aerospace－Airframe ball bearings, single-row, rigid,   sealed,intermediate duty－Inch series

KS W ISO 14209-2004

航空航天.飞机结构用中等负荷密封精密单列刚性球轴承.英制系列

Aerospace－Airframe ball bearings, single-row, rigid,precision,   sealed, intermediate duty－Inch series

KS W ISO 14210-2004

航空航天.飞机结构用扭力管设计的轻负荷密封单列刚性球轴承.英制系列

Aerospace－Airframe ball bearings, single-row, rigid,   sealed,torque tube design, light duty－Inch series

KS W ISO 14211-2004

航空航天.飞机结构用轻负荷扭力管设计的单列刚性密封精密球轴承.英制系列

Aerospace－Airframe ball bearings, single-row, rigid, precision,   sealed, torque tube design, light duty－Inch series

KS W ISO 14212-2004

航空航天.飞机结构用扭力管设计的超轻负荷密封单列刚性球轴承.英制系列

Aerospace－Airframe ball bearings, single-row, rigid,   sealed,torque tube design, extra-light duty－Inch   series

KS W ISO 14213-2004

航空航天.飞机结构用扭力管设计的超轻负荷密封精密单列刚性球轴承.英制系列

Aerospace－Airframe ball bearings, single-row, rigid,   precision,sealed, torque tube design, extra-light duty－Inch series

KS W ISO 14214-2004

航空航天.飞机结构用重负荷密封双列刚性球轴承.英制系列

Aerospace－Airframe ball bearings, double-row, rigid,sealed,   heavy duty－Inch series

KS W ISO 14215-2004

航空航天.飞机结构用重负荷密封精密双列刚性球轴承.英制系列

Aerospace－Airframe ball bearings, double-row,rigid, precision,   sealed, heavy duty－Inch series

KS W ISO 14216-2004

航空航天.飞机结构用重负荷密封双列自调心球轴承.英制系列

Aerospace－Airframe ball bearings, double-row, self-aligning,   sealed, heavy duty－Inch series

KS W ISO 14217-2004

航空航天.飞机结构用重负荷密封精密双列自调心球轴承.英制系列

Aerospace－Airframe ball bearings, double-row,   self-aligning,precision, sealed, heavy duty－Inch   series

KS W ISO 14218-2004

航空航天.飞机结构用重负荷密封单列自调心球轴承.英制系列

Aerospace－Airframe ball bearings, single-row,self-aligning,   sealed, heavy duty－Inch series

KS W ISO 14219-2004

航空航天.飞机结构用重负荷密封精密单列自调心球轴承.英制系列

Aerospace－Airframe ball bearings, single-row,   self-aligning,precision, sealed, heavy duty－Inch   series

KS W ISO 14220-2004

航空航天.飞机结构用轻负荷密封单列自调心球轴承.英制系列

Aerospace－Airframe ball bearings, single-row, self-aligning,   sealed, light duty－Inch series

KS W ISO 14221-2004

航空航天.飞机结构用轻负荷密封精密单列自调心球轴承.英制系列

Aerospace－Airframe ball bearings, single-row,   self-aligning,precision, sealed, light duty－Inch   series

KS W ISO 15395-2018

空间数据和信息传输系统.标准格式化数据单元控制权限数据结构

Space data and information transfer systems－Standard formatted data units－Control Authority data structures

KS W ISO 17057-2009

航空航天固体铆钉试验方法

Aerospace－Rivets, solid－Test method

KS W ISO 2020-1-2008

航空航天飞机操纵用预成形柔性钢丝绳第1部分：尺寸和载荷

Aerospace－Preformed flexible steel wire rope for aircraft   controls－Part 1：Dimensions   and loads

KS W ISO 2020-2-2008

航空航天飞机操纵用预成形柔性钢丝绳第2部分：技术规范

Aerospace－Preformed flexible steel wire rope for aircraft   controls－Part 2：Technical   specification

KS W ISO 2046-2009

飞机用气态呼吸氧气吸液

Gaseous breathing oxygen sopplies for   aircraft

KS W ISO 2669-2018

航空设备的环境试验.稳态加速

Environmental tests for aircraft equipment－Steady-state acceleration

KS W ISO 268-2018

航空器.机械的和电动机械的指示器.一般要求

Aircraft－Mechanical and electromechanical indicators－General requirements

KS W ISO 2685-2018

航空器.机载设备的环境试验程序.指定防火区的防火

Aircraft－Environmental test procedure for airborne equipment－Resistance to fire in designated fire zones

KS W ISO 3161-2002

航空航天.UNJ螺纹.一般要求和极限尺寸

Aerospace－UNJ threads－General   requirements and limit dimensions

KS W ISO 3191-2008

航空航天－沉孔MJ螺纹缩径系列单耳固定自锁螺母，等级：1100兆帕（环境温度）/235℃、100兆帕（环境温度）/315℃和100兆帕（环境温度）/425℃－尺寸

Aerospace－Nuts, anchor, self-locking, fixed, single lug,reduced   series, with counterbore, with MJ threads, classifications：1 100 MPa(at ambient temperature)/235 ℃,1   100 MPa(at ambient temperature)/315 ℃ and 1 100   MPa(at ambient temperature)/425 ℃－Dimensions

KS W ISO 3324-1-2017

航空轮胎和轮辋第1部分：规范

Aircraft tyres and rims－Part 1：Specifications

KS W ISO 3324-2-2017

航空轮胎和轮辋.第2部分：轮胎试验方法

Aircraft tyres and rims — Part 2: Test methods for tyres

KS W ISO 3353-1-2003

航空航天铅及跳动螺纹第1部分：滚制外螺纹

Aerospace－Lead and runout threads－Part 1：Rolled external threads

KS W ISO 3353-2-2003

航空航天铅及跳动螺纹第2部分：内螺纹

Aerospace－Lead and runout threads－Part 2：Internal threads

KS W ISO 4116-2008

航空货运设备.与飞机集装单元装置兼容的地面设备要求

Air cargo equipment－Ground equipment requirements for   compatibility with aircraft unit load devices

KS W ISO 482-2002

航空器.推进装置和零组件.编号和旋转方向描述方法

Aircraft－Propulsion units and components－Methods of   numbering and describing direction of rotation

KS W ISO 5065-1-2003

飞机磁指示器第1部分：特性

Aircraft－Magnetic indicators－Part 1：Characteristics

KS W ISO 5065-2-2003

飞机磁指示器第2部分：试验

Aircraft－Magnetic indicators－Part 2：Tests

KS W ISO 5843-6-2018

航空航天等义术语表第6部分：标准大气

Aerospace－List of equivalent terms－Part   6：Standard atmosphere

KS W ISO 5855-1-2008

航空航天.MJ螺纹.第1部分：一般要求

Aerospace－MJ threads－Part 1：General requirements

KS W ISO 5855-2-2005

航空航天.MJ螺纹.第2部分：螺栓和螺母的极限尺寸

Aerospace－MJ threads－Part 2：Limit dimensions for bolts and nuts

KS W ISO 5855-3-2005

航空航天.MJ螺纹.第3部分：流体系统配件的极限尺寸

Aerospace－MJ threads－Part 3：Limit dimensions for fittings for fluid systems

KS W ISO 5856-2009

航空航天螺钉，100°标准埋头，内偏十字槽肋传动，标准杆，短或中长MJ螺纹，金属材料，涂层或未涂层，强度等级小于或等于1100兆帕－尺寸

Aerospace－Screws, 100° normal   countersunk head, internal offset cruciform ribbed drive, normal shank, short   or medium length MJ threads, metallic material, coated or uncoated, strength   classes less than or equal to 1 100 MPa－Dimensions

KS W ISO 5857-2005

航空航天.强度等级1250MPa带有MJ螺纹的合金钢凸头螺栓.采购规范

Aerospace－Alloy steel protruding head bolts with strength   classification 1 250 MPa and MJ threads－Procurement   specification

KS W ISO 5858-2008

航空航天－最高工作温度425℃以下自锁螺母－采购规范

Aerospace－Nuts, self-locking, with maximum operating temperature   less than 425℃－Procurement specification

KS W ISO 5884-2007

航空航天.流体系统和组件.液压油液固体颗粒污染的系统取样和测量方法

Aerospace－Fluid systems and components－Methods   for system sampling and measuring the solid particle contamination of   hydraulic fluids

KS W ISO 6702-1-2008

飞机.对机载重量和平衡系统的要求.第1部分：总则

Aircraft－Requirements for on-board weight and balance systems－Part 1：General

KS W ISO 6702-2-2003

飞机.对机载重量和平衡系统的要求.第2部分：设计、性能和接口特性

Aircraft－Requirements for on-board weight and balance systems－Part 2：Design, performance and interface   characteristics

KS W ISO 6773-2002

航空航天.流体系统.管道及配件的热冲击试验

Aerospace－Fluid systems－Thermal shock   testing of piping and fittings

KS W ISO 7137-2018

航空器.机载设备的环境条件和试验程序

Aircraft－Environmental conditions and test procedures for airborne   equipment

KS W ISO 7169-2009

航空航天.压力小于等于3000   psi或21 000 kPa的24°锥体流体系统用可分离管配件.采购规范，英寸/公制

Aerospace－Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa－Procurement specification, inch/metric

KS W ISO 7332-2009

航空航天－沉孔MJ螺纹缩径系列双耳浮动自锁锚定螺母，等级：1100兆帕（室温）/235℃、100兆帕（室温）/315℃和100兆帕（室温）/425℃－尺寸

Aerospace－Nuts, anchor, self-locking, floating, two lug, reduced   series, with counterbore, with MJ threads, classifications：1 100 MPa (at ambient temperature)/235 ℃,   1 100 MPa (at ambient temperature)/315 ℃ and 1 100   MPa (at ambient temperature)/425 ℃－Dimensions

KS W ISO 7481-2005

航空航天.最高工作温度小于或等于425℃的自锁螺母.试验方法

Aerospace－Nuts, self-locking, with maximum operatingtemperature   less than or equal to 425 ℃－Test methods

KS W ISO 7689-2018

航空航天.强度等级1100MPa、带MJ螺纹的合金钢螺栓.采购规范

Aerospace－Alloy steel bolts with strength classification 1 100   MPa and MJ threads－Procurement specification

KS W ISO 7913-2018

航空航天.米制螺栓和螺钉的形状和位置公差

Aerospace－Bolts and screws, metric－Tolerances   of form and position

KS W ISO 7938-2004

航空器.操纵钢索系统滑轮用球轴承.尺寸和载荷

Aircraft－Ball bearings for control cable pulleys－Dimensions   and loads

KS W ISO 7939-2004

航空器.操纵钢索系统用带有球轴承的非金属滑轮.尺寸和载荷

Aircraft－Non-metallic pulleys with ball bearings forcontrol cables－Dimensions and loads

KS W ISO 7961-2018

航空航天.螺栓.试验方法

Aerospace－Bolts－Test methods

KS W ISO 8074-2009

航空航天.奥氏体不锈钢零件的表面处理

Aerospace－Surface treatment of austenitic stainless steel parts

KS W ISO 8080-2002

航空航天.钛和钛合金的阳极化处理.硫酸工艺规程

Aerospace－Anodic treatment of titanium and titanium alloys－Surfuric acid process

KS W ISO 8168-2005

航空航天.强度等级为1100MPa、带MJ螺纹的耐腐蚀和耐热钢制螺栓.采购规范

Aerospace－Corrosion-and heat-resisting steel bolts with strength   classification 1 100 MPa and MJ threads－Procurement   specification

KS W ISO 8267-1-2007

飞机牵引杆附件接口要求飞机牵引杆附件接口要求

Aircraft－Tow bar attachment fittings interface requirements－Aircraft－Tow bar attachment fittings   interface requirements－

KS W ISO 8267-2-2007

飞机牵引杆附件接口要求第2部分：支线飞机

Aircraft－Tow bar attachment fittings interface requirements－Part 2：Regional aircraft

KS W ISO 8279-2007

航空航天－螺母，六角，平面，正常高度，标准对边，带MJ螺纹，分类：600兆帕（环境温度）/120℃，600兆帕（环境温度）/235℃，900兆帕（环境温度）/425℃，100兆帕（环境温度）/235℃，100兆帕（环境温度）/315℃，100兆帕（环境温度）/650℃，1 210兆帕（环境温度）/730℃，1 250兆帕（环境温度）/235℃，1 550兆帕（环境温度）/600℃－尺寸

Aerospace－Nuts, hexagonal, plain, normal height, normal across   flats, with MJ threads, classifications：600 MPa(at   ambient temperature)/120 ℃,600 MPa(at ambient   temperature)/235 ℃, 900 MPa(at ambient   temperature)/425 ℃, 1 100 MPa(at ambient   temperature)/235 ℃, 1 100 MPa(at ambient temperature)/315   ℃, 1 100 MPa(at ambient temperature)/650 ℃, 1 210 MPa(at ambient temperature)/730 ℃,   1 250 MPa(at ambient temperature)/235 ℃ and 1 550   MPa(at ambient temperature)/600 ℃－Dimensions

KS W ISO 8280-2008

航空航天.金属材料通用头实心铆钉.尺寸

Aerospace－Rivets, solid, universal head, metallic material－Dimensions

KS W ISO 8538-2007

航空航天－带沉孔和外加垫圈的六角自锁螺母，带MJ螺纹，分类：1 100 MPa（室温）/235℃、1 100 MPa（室温）/315℃和1 100 MPa（室温）/425℃－尺寸

Aerospace－Nuts, hexagonal, self-locking, with counterbore and   captive washer, with MJ threads, classifications：1   100 MPa(at ambient temperature)/235 ℃,1 100 MPa(at   ambient temperature)/315 ℃ and 1 100 MPa(at ambient   temperature)/425 ℃－Dimensions

KS W ISO 8574-2009

航空航天液压系统管材弯曲管合格试验

Aerospace－Hydraulic system tubing－Qualification   tests for bent tubes

KS W ISO 8575-2009

航空航天流体系统液压系统油管

Aerospace－Fluid systems－Hydraulic system   tubing

KS W ISO 8641-2005

航空航天.最高工作温度高于425℃的自锁螺母.采购规范

Aerospace－Self-locking nuts with maximum operating temperature   greater than 425 ℃－Procurement specification

KS W ISO 8642-2007

航空航天.最高工作温度高于425℃的自锁螺母.试验方法

Aerospace－Self-locking nuts with maximum operating temperature   greater than 425 ℃－Test methods

KS W ISO 8788-2003

航空航天.米制螺母.形状和位置公差

Aerospace－Nuts, metric－Tolerances of   form and position

KS W ISO 8940-2007

航天.飞机用固定式自紧螺帽,等级

Aerospace－Nuts, anchor, self-locking, sealing, floating,   two-lug,with counterbore, classifications：900 MPa/120   ℃,900 MPa/175 ℃, 900 MPa/235 ℃－Dimensions

KS W ISO 9139-2005

普通或开槽螺母.采购规范

Aerospace－Nuts, plain or slotted(castellated)－ Procurement specification

KS W ISO 9140-2005

航空航天.普通或开槽螺母.试验方法

Aerospace－Nuts, plain or slotted(castellated)－Test methods

KS W ISO 9152-2005

航空航天.强度等级为1100MPa的钛合金MJ螺纹螺栓.采购规范

Aerospace－Bolts, with MJ threads, in titanium alloys, strength   class 1 100 MPa－Procurement specification

KS W ISO 9154-2005

航空航天.由强度等级为1550MPa的耐热镍基合金制成的带MJ螺纹的螺栓.采购规范

Aerospace－Bolts, with MJ threads, made of heat-resistant   nickel-based alloy, strength class 1 550 MPa－Procurement   specification

KS W ISO 9156-2007

航空航天－螺母，锚定，自锁，固定，90°角，缩径系列，带沉孔，带MJ螺纹，分类：1100兆帕（环境温度）/235℃，100兆帕（环境温度）/315℃和100兆帕（环境温度）/425℃－尺寸

Aerospace－Nuts, anchor, self-locking, fixed, 90° corner,reduced series, with counterbore, with MJ threads,   classifications：1 100 MPa(at ambient temperature)/235   ℃,1 100 MPa(at ambient temperature)/315 ℃ and 1 100 MPa(at ambient temperature)/425 ℃－Dimensions

KS W ISO 9199-2007

航空航天－螺母，双六角，自锁，MJ螺纹，分类：1 100兆帕（环境温度）/425℃，1 100兆帕（环境温度）/650℃，1 210兆帕（环境温度）/425℃，1 210兆帕（环境温度）/730℃，1 550兆帕（环境温度）/235℃，1 550兆帕（环境温度）/425℃和1 550兆帕（环境温度）温度）/600℃－尺寸

Aerospace－Nuts, bihexagonal, self-locking, MJ   threads,classifications：1 100 MPa(at ambient   temperature)/425 ℃,1 100 MPa(at ambient   temperature)/650 ℃1 210 MPa(at ambient   temperature)/425 ℃,1 210 MPa(at ambient   temperature)/730 ℃1 550 MPa(at ambient   temperature)/235 ℃,1 550 MPa(at ambient   temperature)/425 ℃ and 1 550 MPa(at ambient   temperature)/600 ℃－Dimensions

KS W ISO 9216-2007

航空航天.滑轮用合金钢和镀镉或耐腐蚀钢和钝化六角开槽（齿形）螺母.尺寸和质量

Aerospace－Nuts, hexagonal, slotted(castellated), for pulleys, in   alloy steel and cadmium plated or in corrosion- resistant steel and   passivated－Dimensions and masses

KS W ISO 9217-2005

航空航天.滑轮用合金钢和镀镉或耐腐蚀钢和钝化倒角沉孔垫圈.尺寸和质量

Aerospace－Washers, chamfered, with counterbore, for pulleys, in   alloy steel and cadmium plated or in corrosion-resistant steel and passivated－Dimensions and masses

KS W ISO 9218-2005

航空航天.滑轮用平垫圈.合金钢和镀镉垫圈或耐腐蚀钢和钝化垫圈.尺寸和质量

Aerospace－Washers, flat, for pulleys, in alloy steel and cadmium   plated or in corrosion-resistant steel and passivated－Dimensions and masses

KS W ISO 9219-2005

航空航天.滑轮用薄六角头紧公差杆短螺纹螺栓.合金钢和镀镉或钛合金和MoS2润滑或耐腐蚀钢和钝化螺栓.尺寸和质量

Aerospace－Bolts, thin hexagonal head, for pulleys, close   tolerance shank, short thread, in alloy steel and cadmium plated or in   titanium alloy and MoS2 lubricated or in corrosion- resistant steel and   passivated－Dimensions and masses

KS W ISO 9254-2005

航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准直径或中径柄、长MJ螺纹、普通在键头螺栓.尺寸

Aerospace－Bolts, normal spline head, normal or pitch diameter   shank, long length MJ threads, metallic material, coated or uncoated, strength   classes less than or equal to 1 100 MPa－Dimensions

KS W ISO 9255-2005

航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准柄、短或中等长度MJ螺纹、普通在键头螺栓.尺寸

Aerospace－Bolts, normal spline head, normal shank, short or   medium length MJ threads, metallic material, coated or uncoated, strength   classes less than or equal to 1 100 MPa－Dimensions

KS W ISO 9256-2005

航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准直径或中径柄、长MJ螺纹、大六角头螺栓.尺寸

Aerospace－Bolts, large hexagonal head, normal or pitch diameter   shank, long length MJ threads, metallic material, coated or uncoated,   strength classes less than or equal to 1 100 MPa－Dimensions

KS W ISO 9418-2005

航空航天.铝或铝合金实心铆钉.采购规范

Aerospace－Rivets, solid, in aluminium or aluminium alloys－ Procurement specification

KS W ISO 9618-2007

航空航天.等级为:450MPa(环境温度)/120℃、450MPa(环境温度)/235℃、600MPa(环境温度)/425℃、900MPa(环境温度)/235℃、900MPa(环境温度)/315℃、900MPa(环境温度)/650℃、1100MPa(环境温度)/235℃、1100MPa(环境温度)/730℃、1250MPa(环境温度)/600℃,带MJ螺纹、具有减小高度和正常对边尺寸的开槽六角螺母.尺寸

Aerospace－Nuts, hexagonal, slotted(castellated), reduced   height,normal across flats, with MJ threads, classifications：450 MPa (at ambient temperature)/120 ℃,450   MPa (at ambient temperature)/235 ℃,600 MPa (at   ambient temperature)/425 ℃,900 MPa (at ambient temperature)/235   ℃,900 MPa (at ambient temperature)/315 ℃,900 MPa (at ambient temperature)/650 ℃,1   100 MPa (at ambient temperature)/235 ℃,1 100 MPa (at   ambient temperature)/730 ℃,1 250 MPa (at ambient   temperature)/600 ℃－Dimensions

KS W ISO 9634-2008

航空航天流体系统塑料保护帽和保护塞尺寸

Aerospace－Fluid systems－Dimensions of   plastic protective caps and plugs

KS W ISO 9662-2018

航空器设备.机载设备的环境和工作条件.湿度、温度和压力试验

Aircraft equipment－Environmental and operating   conditions for airborne equipment－Humidity,   temperature and pressure tests

KS W ISO 9667-2002

航空器地面保障设备.牵引杆

Aircraft ground support equipment－Tow bars

KS W ISO 9736-2008

航空航天.航空器操纵钢丝绳的螺纹式钢制有眼端.尺寸及载荷

Aerospace－Eye-ends, in steel, threaded, for aircraft control   wire rope－Dimensions and loads

KS W ISO 9737-2008

航空航天.飞行器控制金属丝绳用耐腐蚀钢制锻接有眼端.尺寸和荷载

Aerospace－Eye-ends, in corrosion-resistant steel,swaged on   aircraft control wire rope－Dimensions and loads

KS W ISO 9738-2008

航空航天.飞行器控制金属丝绳用转筒.尺寸和荷载

Aerospace－Turnbarrels, for aircraft control wire rope－Dimensions and loads

KS W ISO 9747-2008

航空航天.飞行器控制金属丝绳用耐腐蚀钢制锻接双柄球端.尺寸和荷载

Aerospace－Double-shank ball-ends, in corrosion-resistant steel,   swaged on aircraft control wire rope－Dimensions and   loads

KS W ISO 9748-2008

航空航天.飞行器控制金属丝绳用耐腐蚀钢制锻接球端.尺寸和荷载

Aerospace－Ball-ends, in corrosion-resistant steel, swaged on   aircraft control wire rope－Dimensions and loads

KS W ISO 9749-2008

航空航天.飞行器控制金属丝绳用耐腐蚀钢制锻接双头螺栓端.尺寸和荷载

Aerospace－Stud-ends, in corrosion-resistant steel, swaged on   aircraft control wire rope－Dimensions and loads

KS W ISO 9757-2008

航空航天.飞行器控制金属丝绳用钢制螺纹叉形杆端.尺寸和荷载

Aerospace－Fork-ends, in steel, threaded, for aircraft control   wire rope turnbarrels－Dimensions and loads

KS W ISO 9758-2008

航空航天.飞行器控制金属丝绳用滚动轴承的螺纹钢制叉形端.尺寸和荷载

Aerospace－Fork-ends, in steel, threaded, for rolling   bearings,for aircraft control wire rope－Dimensions   and loads

KS W ISO 9759-2008

航空航天.飞行器控制金属丝绳用耐腐蚀钢制锻接叉形杆端.尺寸和荷载

Aerospace－Fork-ends, in corrosion-resistant steel, swaged on   aircraft control wire rope－Dimensions and loads

KS W ISO 9760-2008

航空航天.在飞机控制金属丝绳上锻造的滚动轴承用耐腐蚀钢制叉形杆端.尺寸和负载

Aerospace－Fork-ends, in corrosion-resistant steel, swaged on   aircraft control wire rope, for rolling bearings－Dimensions   and loads

KS W ISO 9761-2008

航空航天.飞行器控制金属丝绳螺旋扣用耐腐蚀钢制锁夹.尺寸

Aerospace－Locking clips, in corrosion resistant steel, for   aircraft control wire rope turnbuckles－Dimensions

KS W ISO 9762-2004

航空航天.航空器操纵钢丝绳组件.尺寸及端部配件组合

Aerospace－Aircraft control wire rope assemblies－Dimensions and end-fitting combinations

KS W ISO 9763-2004

航空航天航空器.操纵钢丝绳组件.技术规范

Aerospace－Aircraft control wire rope assemblies－Technical specification