KS B ISO 10816-21-2017

机械振动.在非旋转部件上测量评定机械振动.第21部分：带齿轮箱的水平轴风力涡轮机

Mechanical vibration — Evaluation of machine vibration by   measurements on non-rotating parts — Part 21:   Horizontal axis wind turbines with gearbox

KS B ISO 10816-3-2016

机械振动.用在非旋转部件上测量的方法评定机械振动.第3部分：在现场测量时，额定功率在15kw以上，额定速度在120r/min至15000r/min之间的工业机械

Mechanical vibration－Evaluation of machine vibration by   measurements on non-rotating parts－Part 3：Industrial machines with nominal power above 15 kW and nominal   speeds between 120 r/min and 15 000 r/min when measured in situ

KS B ISO 10816-4-2016

机械振动非旋转部件测量法评定机械振动第4部分：带液膜轴承的燃气轮机组

Mechanical vibration－Evaluation of machine vibration by   measurements on non-rotating parts－Part 4：Gas turbine sets with fluid-film bearings

KS B ISO 10816-5-2001

机械振动非旋转部件测量法评定机械振动第5部分：水力发电厂和泵站机组

Mechanical vibration－Evaluation of machine vibration by   measurements on non-rotating parts－Part 5：Machine sets in hydraulic power generating and pumping plants

KS B ISO 10816-6-2014

机械振动.用在非旋转部件上测量法评定机械振动.第6部分：额定功率大于100kw的往复式机械

Mechanical vibration — Evaluation of machine vibration by   measurements on non-rotating parts — Part 6:   Reciprocating machines with power ratings above 100 kW

KS B ISO 10816-7-2017

机械振动.用在非旋转部件上测量法评定机械振动.第7部分：工业用旋转动力泵，包括对旋转轴的测量

Mechanical vibration — Evaluation of machine vibration by   measurements on non-rotating parts — Part 7:   Rotodynamic pumps for industrial applications, including measurements on   rotating shafts

KS B ISO 10816-8-2017

机械振动.用在非旋转部件上测量法评定机械振动.第8部分：往复压缩机系统

Mechanical vibration — Evaluation of machine vibration by   measurements on non-rotating parts — Part 8:   Reciprocating compressor systems

KS B ISO 10819-2015

机械振动与冲击.手臂振动.手掌戴手套时对振动传递率的测量和评定

Mechanical vibration and shock — Hand-arm vibration — Method for the measurement and evaluation of the vibration   transmissibility of gloves at the palm of the hand

KS B ISO 10823-2001

滚子链驱动装置的导则

Guidance on the selection of roller chain   drives

KS B ISO 10825-2016

齿轮轮齿磨损和损伤术语

Gears－Wear and damage to gear teeth－Terminology

KS B ISO 10828-2007

蜗轮.蜗轮齿廓的几何形状

Worm geras－Geometry of worm profiles

KS B ISO 10849-2003

固定源排放氮氧化物质量浓度的测定自动测量系统的性能特征

Stationary source emissions－Determination of the mass   concentration of nitrogen oxides－Performance   characteristics of automated measuring systems

KS B ISO 10863-2014

焊接的无损检验.超声波检验.利用衍射时差法(TOFD)

Non-destructive testing of welds — Use of time-of-flight diffraction   technique(TOFD)

KS B ISO 1088-2015

明渠水流测量.流速-面积法.确定流量误差资料的收集和处理

Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in   measurement

KS B ISO 10887-2005

有键型三爪钻头卡盘.技术规范

Key type three-jaw drill chucks－Specification

KS B ISO 10888-2005

无键型三爪钻头卡盘.技术规范

Keyless type three-jaw drill chucks－Specification

KS B ISO 10889-1-2005

圆柱柄刀夹第1部分：圆柱柄定位孔交货技术条件

Tool holders with cylindrical shank－Part 1：Cylindrical   shank, location bore－Technical delivery conditions

KS B ISO 10889-2-2005

圆柱柄刀夹第2部分：圆柱柄定位孔交货技术条件

Tool holders with cylindrical   shank--part2:Type A, shanks for tool holders of special designs

KS B ISO 10889-3-2005

圆柱柄刀夹第3部分：带矩形径向座的B型刀夹

Tool holders with cylindrical shank－Part 3：Type B   with rectangular radial seat

KS B ISO 10889-4-2005

圆柱柄刀夹第4部分：带矩形轴向座的C型刀夹

Tool holders with cylindrical shank－Part 4：Type C   with rectangular axial seat

KS B ISO 10889-5-2005

圆柱柄刀夹第5部分：D型多矩形刀座刀夹

Tool holders with cylindrical shank－Part 5：Type D   with more than one rectangular seat

KS B ISO 10889-6-2005

圆柱柄刀夹第6部分：E型圆柱柄刀夹

Tool holders with cylindrical shank－Part 6：Type E   with cylindrical seat

KS B ISO 10889-7-2005

圆柱柄刀夹第7部分：F型圆锥座刀夹

Tool holders with cylindrical shank－Part 7：Type F   with taper seat

KS B ISO 10889-8-2005

圆柱柄刀夹第8部分：Z型，附件

Tool holders with cylindrical shank－Part 8：Type   Z, accessories

KS B ISO 1089-2003

点焊设备的电极锥度配合.尺寸

Electrode taper fits for spot welding   equipment－Dimensions

KS B ISO 10893-11-2018

钢管的无损检测.第11部分:无缝与焊接钢管纵向和/或横向缺陷的检测用自动超声波探伤

Non-destructive testing of steel tubes — Part 11: Automated ultrasonic   testing of the weld seam of welded steel tubes for the detection of   longitudinal and/or transverse imperfections

KS B ISO 10897-2005

1:10锥度夹头和刀夹.夹头、夹柄和螺母

Collets for tool holders with taper ratio 1：10－Collets,   holders, nuts

KS B ISO 10899-2005

高速钢双螺旋钻头.技术规范

High-speed steel two-flute twist drills－Technical specifications

KS B ISO 10907-1-2012

模铸工具.定位环

Tools for moulding－Locating rings－Part 1：Locating rings for mounting without   thermal insulating sheets in small or medium moulds－Types   A and B

KS B ISO 10920-2005

气瓶.气瓶与瓶阀连接用25E锥螺纹.规范

Gas cylinders－25E taper thread for connection of valves to gas   cylinders－Specification

KS B ISO 10934-1-2004

光学和光学仪器.显微镜词汇.第1部分：光学显微镜

Optics and optical instruments－Vocabulary for microscopy－Part 1：Light microscopy

KS B ISO 10934-2-2011

光学和光学仪器.显微镜词汇.第2部分：光学显微镜的先进技术

Optics and optical instruments－Vocabulary for microscopy－Part 2：Advanced techniques in light   microscopy

KS B ISO 10936-1-2006

光学和光学仪器操作显微镜第1部分：要求和试验方法

Optics and optical instruments－Operation microscopes－Part 1：Requirements and test methods

KS B ISO 10945-2003

液压传动.充气蓄能器.气口尺寸

Hydraulic fluid power－Gas-loaded accumulators－ Dimensions of gas ports

KS B ISO 10946-2003

液压传动.隔离式充气蓄能器.优先选择的液压油口

Hydraulic fluid power－Gas-loaded accumulators with   separator－Selection of preferred hydraulic ports

KS B ISO 10968-2015

土方机械.司机操纵装置

Earth-moving machinery — Operator’s   controls

KS B ISO 10972-1-2015

起重机.机构要求.第1部分：总则

Cranes — Requirements for mechanisms — Part 1:   General

KS B ISO 10972-2-2017

起重机机构要求第2部分：移动式起重机

Cranes－Requirements for mechanisms－ Part 2：Mobile cranes

KS B ISO 10972-3-2015

起重机.机构要求.第3部分：塔式起重机

Cranes — Requirements for mechanisms — Part 3:   Tower cranes

KS B ISO 10972-4-2017

起重机机构要求第4部分：臂架起重机

Cranes－Requirements for mechanisms－ Part 4：Jib cranes

KS B ISO 10972-5-2017

起重机机构要求第5部分：桥式和门式起重机

Cranes－Requirements for mechanisms－ Part 5：Bridge and gantry cranes

KS B ISO 10973-2003

起重机.备件手册

Cranes－Spare parts manual

KS B ISO 10987-2016

土方机械.可持续性.术语,可持续性因素和报告

Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting

KS B ISO 10990-4-2003

动物（哺乳动物）诱捕器第4部分：陆上或水下使用的诱捕系统试验方法

Animal(mammal) traps－Part 4：Methods   for testing killing-trap systems used on land or underwater

KS B ISO 10990-5-2003

动物（哺乳动物）诱捕器第5部分：诱捕器试验方法

Animal(mammal) traps－Part 5：Methods   for testing restraining traps

KS B ISO 1099-2002

金属材料.轴向负载疲劳试验

Metals－Axial load fatigue testing

KS B ISO 10998-2018

农业轮式拖拉机.转向要求

Agricultural tractors — Requirements for steering

KS B ISO 11001-1-2017

农业轮式拖拉机.三点悬挂连接器.第1部分：U形框架连接器

Agricultural wheeled tractors — Three-point hitch couplers —Part 1: U-frame coupler

KS B ISO 11001-2-2002

农业轮式拖拉机和机具三点悬挂挂接器第2部分：人字架挂接器

Agricultural wheeled tractors and   implements－Three－point hitch couplers－Part 2：A－frame coupler

KS B ISO 11001-3-2012

农业轮式拖拉机和机具三点悬挂挂接器第3部分：连杆式挂接器

Agricultural wheeled tractors and   implements－Three-point hitch   couplers－Part 3：Link coupler

KS B ISO 11001-4-2002

农业轮式拖拉机和机具三点悬挂挂接器第4部分：杆式挂接器

Agricultural wheeled tractors and   implements－Three－point hitch couplers－Part 4：Bar coupler

KS B ISO 1100-2-2015

明渠液体流量测量第2部分：水位流量关系的测定

Measurement of liquid flow in open channels－Part 2：Determination   of the stage-discharge relation

KS B ISO 1101-2003

技术制图几何公差形状、方位、位置和跳动公差通用、定义、符号和图纸标注

Technical drawings－Geometrical tolerancing－Tolerancing of form, orientation, location and run-out－Generalities, definitions, symbols, indications on drawings

KS B ISO 11031-2017

起重机.抗地震设计原则

Cranes — Principles for seismically resistant design

KS B ISO 11042-1-2015

燃气轮机.废气排放.第1部分：测量和评定

Gas turbines — Exhaust gas emission — Part   1: Measurement and evaluation

KS B ISO 11042-2-2015

燃气轮机.废气排放.第2部分：自动排放监测

Gas turbines — Exhaust gas emission — Part   2: Automated emission monitoring

KS B ISO 1106-1-2007

熔焊接头射线照相检验的推荐实施规程第1部分：50 mm厚钢板的熔焊对接

Recommended practice for radiographic   examination of fusion welded joints－Part 1：Fusion welded butt in steel plates   up to 50 mm thick

KS B ISO 1106-2-2007

熔焊接头射线照相检验的推荐作法第2部分：厚度大于50 mm小于等于200 mm的钢板的熔焊对接接头

Recommended practice for radiographic   examination of fusion welded joints－Part 2：Fusion welded butt joints in steel   plates thicker than 50 mm and up to and including 200 mm in thickness

KS B ISO 1106-3-2007

熔焊接头射线照相检验的推荐作法第3部分：壁厚小于等于50 mm的钢管熔焊环向接头

Recommended practice for radiographic   examination of fusion welded joints－Part 3：Fusion welded circumferential   joints in steel pipes up to 50 mm wall thickness

KS B ISO 11071-1-2002

世界电梯安全标准比较-电动电梯

Comparison of worldwide elevator safety   standards－Electric elevators

KS B ISO 11071-2-2009

世界电梯安全标准比较-液压电梯

Comparison of worldwide elevator safety   standards－Hydraulic elevators

KS B ISO 11086-2015

燃气轮机.词汇

Gas turbines — Vocabulary

KS B ISO 11090-1-2015

电火花成形机（电火花成形机）的试验条件.精度试验.第1部分：单柱架式凿岩机（横移工作台型和固定工作台型）

Test conditions for die sinking   electro-discharge machines(die sinking EDM) — Testing of the accuracy —   Part 1: Single column machines(cross-slide table type and fixed table type)

KS B ISO 11090-2-2015

电火花成形机（电火花成形机）的试验条件.精度试验.第2部分：双柱机床（滑动头型）

Test conditions for die sinking   electro-discharge machines(die sinking EDM) — Testing of the accuracy —   Part 2: Double-column machines(slide-head type)

KS B ISO 11111-1-2016

Animal (mammal) traps Part 4: Test methods   for trapping systems for land or underwater use

Textile machinery — Safety requirements — Part 1: Common requirements

KS B ISO 11111-2009

Animal (mammal) traps Part 5: Test methods   for traps

Safety requirements for textile machinery

KS B ISO 11112-2012

土方机械.驾驶舱.尺寸和要求事项

Earth-moving machinery－Operator’s   seat－Dimensions and requirements

KS B ISO 11113-2005

液化气体气瓶(含乙炔和液化石油气).充气时的检验

Cylinders for liquefied gases(excluding   acetylene and LPG)－Inspection   at time of filling

KS B ISO 11114-1-2016

气瓶.气瓶和含气阀门材料的兼容性.第1部分：金属材料

Gas cylinders - Compatibility of cylinder   and valve materials with gas contents - Part 1: Metallic materials

KS B ISO 11114-2-2015

气瓶.气瓶和含气阀门材料的兼容性.第2部分：非金属材料

Gas cylinders — Compatibility of cylinder and valve   materials with gas contents — Part 2: Non-metallic   materials

KS B ISO 11114-3-2016

可运输气瓶气瓶与含气阀门材料的相容性第3部分：氧气环境中自燃试验

Transportable gas cylinders－Compatibility of cylinder and valve   materials with gas contents－Part 3：Autogenous ignition test in oxygen atmosphere

KS B ISO 11116-1-2012

气瓶－气瓶阀门连接用17E锥螺纹－第1部分：规范

Gas cylinders－17E taper thread for connection of valves to gas   cylinders－Part 1：Specification

KS B ISO 11116-2-2012

气瓶－气瓶阀门连接用17E锥螺纹－第2部分：检验量规

Gas cylinders－17E taper thread for connection of valves to gas   cylinders－Part 2：Inspection   gauges

KS B ISO 11117-2015

气瓶.工业和医用气瓶的瓶帽和护罩.设计、结构和试验

Gas cylinders－Valve protection caps and valve guards for industrial   and medical gas cylinders－Design, construction and   tests

KS B ISO 11118-2016

气瓶.非重复充装金属气瓶.规范和试验方法

Gas cylinders－Non－refillable metallic gas   cylinders－Specification and test methods

KS B ISO 11119-1-2016

气瓶.可再填充的复合气瓶和管.设计、建造和试验.第1部分：450升以下的环箍包裹纤维增强复合气瓶和管

Gas cylinders — Refillable composite gas cylinders   and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and   tubes up to 450 L

KS B ISO 11119-2-2016

气瓶.可再填充的复合气瓶和管.设计、建造和试验.第2部分：带负载分担金属衬里的450升以下的全包裹纤维增强复合气瓶和管

Gas cylinders — Refillable composite gas cylinders   and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders   and tubes up to 450 L with load-sharing metal liners

KS B ISO 11119-3-2015

气瓶.可再填充的复合气瓶和管.第3部分：具有非均载金属或非金属衬里的450升以下的全包裹纤维增强复合气瓶和管

Gas cylinders — Refillable composite gas cylinders   and tubes — Part 3: Fully wrapped fibre reinforced   composite gas cylinders and tubes up to 450 L with non-load sharing metallic   or non-metallic liners

KS B ISO 11120-2017

气瓶.150升～3000升水容量的可重复充装无缝钢管气瓶.设计、结构和试验

Gas cylinders — Refillable seamless steel tubes of   water capacity between 150 L and 3 000 L — Design,   construction and testing

KS B ISO 1112-2005

钟表.功能和非功能宝石

Horology－Functional and non-functional jewels

KS B ISO 11145-2015

光学和光学仪器.激光和激光设备.词汇和符号

Optics and optical instruments — Lasers and laser-related equipment — Vocabulary and symbols

KS B ISO 11146-1-2015

激光和激光设备激光束宽度、发散角和光束传播比的试验方法第1部分：像散和简单像散光束

Lasers and laser-related equipment－Test methods for laser beam widths,   divergence angles and beam propagation ratios－Part 1：Stigmatic and simple astigmatic beams

KS B ISO 11149-2015

光学和光学仪器.激光和激光设备.除通信外应用激光的光纤维联结器

Optics and optical instruments ― asers and laser-related equipment ― iber optic connectors for non-telecommunication laser   applications

KS B ISO 11151-1-2015

激光和激光相关设备标准光学元件第1部分：紫外、可见和近红外光谱范围元件

Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral   ranges

KS B ISO 11151-2-2015

激光和激光相关设备标准光学元件第2部分：红外光谱范围元件

Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range

KS B ISO 11161-2004

工业自动化系统.集成制造系统.安全基本要求

Industrial automation systems－Safety of integrated manufacturing   systems－Basic requirements

KS B ISO 11170-2014

液压传动.滤芯.性能特性检验的试验序列

Hydraulic fluid power — Sequence of tests for verifying   performance characteristics of filter elements

KS B ISO 11171-2017

液压传动.液体自动颗粒计数器的校准

Hydraulic fluid power－Calibration of automatic particle   counters for liquids

KS B ISO 11191-2003

气瓶.气瓶与瓶阀连接用25E锥螺纹.检验量规

Gas cylinders－25E taper thread for connection of valves to gas   cylinders－Specification

KS B ISO 1119-2014

产品几何量技术规范(GPS).锥度和锥度角系列

Geometrical product specifications(GPS) — Series of conical tapers and taper   angles

KS B ISO 1120-2018

输送机皮带.机械紧固件的强度测定.静态试验法

Conveyor belt — Determination of strength of   mechanical fastenings — Static test method

KS B ISO 11204-2007

声学.机械装置及设备发出的噪声.工作地点和其它试验场所声压级的测量.测试要求环境条件的改变

Acoustics－Noise emitted by machinery and equipment－Measurement of emission sound pressure levels at a work station   and at other specified positions－Method requiring   environmental corrections

KS B ISO 11205-2007

声学.机械和设备发射的噪声.决定工作场所与使用声强的其他指定场所噪音声压级的工学方法

Acoustics－Noise emitted by machinery and equipment－Engineering method for the determination of emission sound   pressure levels in situ at the work station and at other specified positions   using sound intensity

KS B ISO 1122-1-2018

齿轮术语词汇第1部分：几何定义

Vocabulary of gear terms－Part 1：Definitions   related to geometry

KS B ISO 1122-2-2016

齿轮术语词汇第2部分：与蜗轮几何有关的定义

Vocabulary of gear terms－Part 2：Definitions   related to worm gear geometry

KS B ISO 11252-2015

激光和激光设备.激光装置.对文件的最低要求

Lasers and laser-related equipment－Laser device－Minimum   requirements for documentation

KS B ISO 11253-2015

激光和激光设备.激光装置.机械接口

Lasers and laser-related equipment ― Laser device ― Mechanical interfaces

KS B ISO 113-2016

滚动轴承.止推轴承座.

Rolling bearings－Plummer block housings

KS B ISO 11329-2005

水文测验.潮水河悬移质泥沙测量

Hydrometric determinations－Measurement of suspended sediment   transport in tidal channels

KS B ISO 11363-1-2016

气瓶.气瓶阀门连接用17E和25E椎管螺纹.第1部分:规范

Gas cylinders - 17E and 25E taper threads   for connection of valves to gas cylinders - Part1: Specification