KS B ISO 13778-2002

滑动轴承.薄壁轴瓦的质量保证.选配法获得小间隙

Plain bearings－Quality assurance of thin－walled half bearings－Selective assembly of   bearings to achieve a narrow clearance range

KS B ISO 13849-1-2016

机械安全控制系统安全相关部件第1部分：设计通则

Safety of machinery－Safety-related parts of control   systems－Part 1：General   principles for design

KS B ISO 13849-100-2003

机械安全控制系统的安全相关部件第100部分：ISO 13849－1的使用和应用指南

Safety of machinery－Safety-related parts of control   systems－Part 100：Guidelines   for the use and the application of ISO 13849－1

KS B ISO 13851-2003

机械安全.双手控制器.功能问题和设计原理

Safety of machinery－Two hand control devices－Fundamental aspects and design principles

KS B ISO 13852-2002

机械安全.防止上肢触及危险区的安全距离

Safety of machinery－ Safety distances to prevent danger   zones being reached by the upper limbs

KS B ISO 13853-2002

机械安全.防止下肢触及危险区的安全距离

Safety of machinery－Safety distances to prevent danger   zones being reached by the lower limbs

KS B ISO 13854-2002

机械安全.避免人体部分挤压的最小间距

Safety of machinery－Minimum gaps to avoid crushing of   parts of the human body

KS B ISO 13855-2016

机械安全.保护设备相对于人体部位接近速度的定位

Safety of machinery－Positioning of protective equipment   with respect to the approach speeds of parts of the human body

KS B ISO 13856-1-2016

机械安全压敏防护装置第1部分：压敏垫和压敏地板设计和试验通则

Safety of machinery－Pressure-sensitive protective devices－Part 1：General principles for design and   testing of pressure-sensitive mats and pressure-sensitive floors

KS B ISO 13856-2-2016

机械安全压敏防护装置第2部分：压敏边缘和压敏棒设计和试验通则

Safety of machinery－Pressure-sensitive protective devices－Part 2：General principles for the design   and testing of pressure-sensitive edges and pressure-sensitive bars

KS B ISO 13857-2016

机械安全.防止上、下臂触及危险区的安全距离

Safety of machinery — Safety distances to prevent hazard   zones being reached by upper and lower limbs

KS B ISO 13860-2017

林业机械.集运机.术语、定义和商业规范

Machinery for forestry－Forwarders－Terms,   definitions and commercial specifications

KS B ISO 13861-2002

林业机械.轮式集运机.术语、定义和商业规范

Machinery for forestry－Wheeled skidders－Terms, definitions and commercial specifications

KS B ISO 13862-2006

林业用机械.伐木归堆联合机.术语、定义和商业规范

Machinery for forestry－Feller-bunchers－Terms, definitions and commercial specifications

KS B ISO 13879-2004

石油和天然气工业.功能规范的内容和起草

Petroleum and natural gas industries－Content and drafting of a functional   specification

KS B ISO 13880-2004

石油和天然气工业.技术规范的内容和起草

Petroleum and natural gas industries－Content and drafting of a technical   specification

KS B ISO 13916-2003

焊接.预热温度、道间温度和预热维持温度测量的指南

Welding－Guidance on the measurement of preheating temperature, interpass   temperature and preheat maintenance temperature

KS B ISO 13918-2008

焊接.电弧螺栓焊用螺栓和陶瓷箍套

Welding－Studs and ceramic ferrules for arc stud welding

KS B ISO 13919-1-2003

焊接电子和激光束焊接接头缺陷质量分级指南第1部分：钢

Welding－Electron and laser-beam welded joints－Guidance   on quality levels for imperfections－Part 1：Steel

KS B ISO 13919-2-2003

焊接－电子束和激光束焊接接头－焊接缺陷质量分级指南－第2部分：焊接用铝及其合金

Welding－Electron beam and laser beam welded joints－Guidance of quality levels for weld defects－Part 2：Aluminium and its alloys for   welding

KS B ISO 13984-2004

液压.道路车辆燃油系统界面

Liquid hydrogen－Land vehicle fuelling system   interface

KS B ISO 13985-2009

液态氢.陆地车辆燃料箱

Liquid hydrogen－Land vehicle fuel tanks

KS B ISO 13990-2005

纺织机械和附件.纺织机用输纱机和纱机控制器

Textile machinery and accessories－Yarn feeders for knitting machines－Vocabulary

KS B ISO 14096-1-2007

无损检测射线照相胶片数字化系统的鉴定第1部分：定义、图像质量参数的定量测量、标准参考胶片和质量控制

Non-destructive testing－Qualification of radiographic film   digitisation systems－Part 1：Definitions,   quantitative measurements of image quality parameters, standard reference   film and qualitative control

KS B ISO 14104-2015

齿轮.磨削后表面回火腐蚀剂的检验.化学方法

Gears－Surface temper etch inspection after grinding

KS B ISO 14119-2016

机械安全.带有联锁装置的保护装置.设计和选择原则

Safetu of machinery－Interlocking devices associated with   guards－Principles for design and selection

KS B ISO 14120-2017

机械安全.保护装置.固定和可移动保护装置的设计和制造的一般要求

Safe of machinery — Guards —   General requirements for the design and construction of fixed and movable   guards

KS B ISO 14121-2002

机械安全.风险评价的原则

Safety of machinery－Principles of risk assessment

KS B ISO 14122-1-2014

机械安全进入机械的固定方式第1部分：两级间固定方式的选择

Safety of machinery — Permanent means of access to   machinery — Part 1: Choice of fixed means of access   between two levels

KS B ISO 14122-2-2014

机械安全进入机械的固定方式第2部分：工作平台和走道

Safety of machinery — Permanent means of access to   machinery — Part 2: Working platforms and walkways

KS B ISO 14123-1-2002

机械安全降低机械有害物质对健康的危害第1部分：机械制造企业的原则和规范

Safety of machinery－Reduction of risks to health from   hazardous substances emitted by machinery－Part 1：Principles and specifications for machinery manufacturers

KS B ISO 14123-2-2002

机械安全降低机械有害物质对健康的风险第2部分：验证程序的方法学

Safety of machinery－ Reduction of risks to health from   hazardous substances emitted by machinery-Part 2 : Methodology leading to   verification procedures

KS B ISO 1413-2008

钟表.防震手表

Horology－Shock－resistant watches

KS B ISO 14132-1-2004

光学和光学仪器.望远镜系统词汇.第1部分：一般术语和ISO   14132中术语的字母索引

Optics and optical instruments－Vocabulary for telescopic systems－Part 1：General terms and alphabetical   indexes of terms in ISO 14132

KS B ISO 14132-2-2004

光学和光学仪器望远镜术语第2部分：双筒望远镜、单筒望远镜和定位镜术语

Optics and optical instruments－Vocabulary for telescopic systems－Part 2：Terms for binoculars, monoculars   and spotting scopes

KS B ISO 14137-2016

机床.线切割机床(EDM丝)检验条件.术语及精度检验

Machine tools — Test conditions for wire   electrical-discharge machines(wire EDM) — Terminology   and testing of the accuracy

KS B ISO 14175-2008

焊接耗材.弧焊及切割用保护气体

Welding consumables－Shielding gases for arc welding and   cutting

KS B ISO 14246-2015

可搬运的储气罐.储气罐阀.制造试验和检验

Transportable gas cylinders－Gas cylinder valves－Manufacturing tests and inspections

KS B ISO 14253-1-2015

产品几何量技术规范（GPS）工件和测量设备的测量检验第1部分：证明符合或不符合规范的判定规则

Geometrical product specifications(GPS) — Inspection by measurement of   workpieces and measuring equipment — Part 1: Decision   rules for proving conformity or nonconformity with specifications

KS B ISO 14269-5-2004

农林拖拉机和自走式机械驾驶室第5部分：增压系统试验方法

Tractors and self-propelled machines for   agriculture and forestry－Operator enclosure environment－Part 5：Pressurization system test method

KS B ISO 14271-2004

电阻点焊、凸焊和缝焊的维氏硬度试验(低荷载和微硬度)

Vickers hardness testing of resistance   spot, projection and seam welds(low load and microhardness)

KS B ISO 14272-2016

电阻点焊和凸焊横向张拉试验的试样尺寸和程序

Specimen dimensions and procedure for cross   tension testingresistance spot and embossed projection welded joints

KS B ISO 14273-2016

电阻点焊和凸焊拉伸剪切试验的试样尺寸和程序

Specimen dimensions and procedure for shear   testingresistance spot and embossed projection welded joints

KS B ISO 14323-2007

电阻点焊和凸焊.焊接头破坏性试验.试样尺寸和冲击剪切试验与十字拉力试验程序

Resistance spot welding and projection   welds－Destructive testing of   welds－Specimen dimensions and procedure for impact   sheaar test and cross－tension testing

KS B ISO 14324-2016

电阻点焊.焊缝的破坏性试验.点焊接头的疲劳试验方法

Resistance spot welding－Destructive tests of welds－Methods for the fatigue testing of spot welded joints

KS B ISO 14327-2004

电阻焊接.电阻点焊、凸焊和缝焊用可焊性瓣轮的测定规程

Resistance welding－Procedures for determining the   weldability lobe for resistance spot, projection and seam welding

KS B ISO 14343-2009

焊接材料.不锈钢和耐热钢电弧焊用焊丝电极、焊丝和焊条.分类

Welding consumables－Wire electrodes, strip electrodes,   wires and rods for arc welding of stainless and heat resisting steels－Classification

KS B ISO 14368-2-2005

无机和蓝宝石表玻璃第2部分：用粘接剂或垫圈组装到表壳上

Mineral and sapphire watch－glasses－Part   2：Assembly to the case by adhesive or using a gasket

KS B ISO 14368-3-2005

无机和蓝宝石钟表玻璃第3部分：定性标准和试验方法

Mineral and sapphire watch－glasses－Part   3：Qualitative criteria and test methods

KS B ISO 14372-2014

焊接耗材.通过测量扩散氢方法测定手工电弧焊焊条的抗湿性

Welding consumables — Determination of moisture resistance   of manual metal arc welding electrodes by measurement of diffusible hydrogen

KS B ISO 14397-2-2015

土方机械装载机和反铲装载机第2部分：测量最大提升高度的爆发力和提升能力的试验方法

Earth-moving machinery－Loaders and backhoe loaders－Part 2：Test method for measuring breakout   forces and lift capacity to maximum lift height

KS B ISO 14401-1-2012

土方机械监视和后视镜视野第1部分：试验方法

Earth-moving machinery－Field of vision of surveillance and   rear-view mirrors－Part 1：Test   methods

KS B ISO 14401-2-2015

土方机械.监控和后视镜的视野.第2部分：性能标准

Earth-moving machinery — Field of vision of surveillance and   rear-view mirrors — Part 2: Performance criteria

KS B ISO 14405-1-2017

几何产品规范(GPS).尺寸公差.第1部分:线性尺寸

Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes

KS B ISO 14405-2-2017

产品几何量技术规范(GPS).尺寸公差.第2部分:除了线性尺寸之外的尺寸

Geometrical product specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes

KS B ISO 14490-3-2006

光学和光学仪器.望远系统的试验方法.第3部分:望远镜试验方法

Optics and optical instruments－Test methods for telescopic systems－Part 3：Test methods for telescopic sights

KS B ISO 14500-2005

纺织机械与附件.提花织造机用综线.词汇

Textile machinery and accessories－Harnesses for Jacquard weaving   machines－Vocabulary

KS B ISO 14511-2014

封闭管道中流体流量的测量.热质流量计

Measurement of fluid flow in closed   conduits — Thermal mass   flowmeters

KS B ISO 14518-2017

起重机.试验荷载的要求

Cranes－Requirements for test loads

KS B ISO 14520-1-2007

气体灭火系统物理性能和系统设计第1部分：一般要求

Gaseous fire-extinguishing systems－Physical properties and system design－Part 1：General requirements

KS B ISO 14520-6-2007

气体灭火系统物理性能和系统设计第6部分：HCFC混合A型灭火剂

Gaseous fire-extinguishing systems－Physical properties and system design－Part 6：HCFC Blend A extinguishant

KS B ISO 14520-9-2007

气体灭火系统物理性能和系统设计第9部分：HFC 227ea灭火剂

Gaseous fire-extinguishing systems－Physical properties and system design－Part 9：HFC 227ea extinguishant

KS B ISO 14534-2015

眼科光学.隐形眼镜和接触透镜保护产品.基本要求

Ophthalmic optics－Contact lenses and contact lens care   products－Fundamental requirements

KS B ISO 14539-2015

操作型工业机器人.用抓式钳子进行物品传递.词汇和特征表示

Manipulating industrial robots－Object handling with grasp-type   grippers－Vocabulary and presentation of   characteristics

KS B ISO 14554-1-2016

焊接质量要求.金属材料的电阻焊接.第1部分:完整质量要求

Quality requirement for welding -   Resistance welding of metallic materials -Part 1 : Comprehensive quality   requirements

KS B ISO 14554-2-2016

焊接质量要求.金属材料的电阻焊接.第2部分:基本质量要求

Quality requirements for welding -   Resistance welding of metallic materials -Part 2 : Elementary quality   requirements

KS B ISO 14556-2002

钢.夏比V形切痕摆式冲击试验.仪器试验法

Steel－Charpy V－notch pendulum impact test－Instrumented test method

KS B ISO 14577-1-2004

金属材料硬度和材料参数的仪器化压痕试验第1部分：试验方法

Metallic materials－Instrumented indentation test for   hardness and materials parameters－Part 1：Test method

KS B ISO 14577-2-2004

金属材料硬度和材料参数的仪器化压痕试验第2部分：试验机的验证和校准

Metallic materials-instrumented indentation   test for hardness and materials parameters－Part 2：Verification and calibration of   testing machines

KS B ISO 14577-3-2004

金属材料硬度和材料参数的仪器化压痕试验第3部分：标准试块的校准

Metallic materials－Instrumented indentation test for   hardness and materials parameters－Part 3：Calibration of reference blocks

KS B ISO 14579-2004

内六角头螺钉

Hexalobular socket head cap screws

KS B ISO 14580-2007

凸头内六角螺钉

Hexalobular socket cheese head screws

KS B ISO 14583-2007

平头内六角螺钉

Hexalobular socket pan head screws

KS B ISO 14584-2007

沉头内六角螺钉

Hexalobular socket raised countersunk head   screws

KS B ISO 14585-2007

平头内六角攻丝螺钉

Hexalobular socket pan head tapping screws

KS B ISO 14586-2007

沉头内六角攻丝螺钉

Hexalobular socket countersunk head tapping   screws

KS B ISO 14587-2008

半沉头(椭圆形)内六角攻丝螺钉

Hexalobular socket raised countersunk(oval)   head tapping screws

KS B ISO 14588-2007

盲铆钉.术语和定义

Blind rivets－Terminology and definitions

KS B ISO 14589-2007

盲铆钉.机械试验

Blind rivets－Mechanical testing

KS B ISO 14635-1-2009

齿轮FZG试验规程第1部分：FZG油的相对胶合承载能力试验方法A/8,3/90

Gears－FZG test procedures－Part 1：FZG test method A/8,3/90 for relative scuffing load-carrying   capacity of oils

KS B ISO 14635-2-2009

齿轮－FZG试验规程－第2部分：高极压油相对胶合承载能力FZG阶跃载荷试验A10/16,6R/120

Gear－FZG test procedures－Part 2：FZG step load test A10/16,6R/120 for relative scuffing   load-carrying capacity of high EP oils

KS B ISO 14635-3-2009

齿轮FZG试验规程第3部分：半流体齿轮润滑脂相对胶合承载能力和磨损特性FZG试验方法A/2.8/50

Gears－FZG test procedures－Part 3：FZG test method A/2.8/50 for relative scuffing load-carrying   capacity and wear characteristics of semifluid gear greases

KS B ISO 14649-1-2015

工业自动化系统和集成.物理设备控制.计算机数控器用数据模型.第1部分:概论和基本原理

Industrial automation systems and   integration－Physical device   control－Data model for computerized numerical   controllers－Part 1：Overview   and fundamental principles

KS B ISO 14649-10-2015

工业自动化系统和集成.机械装置控制.计算机数控器用数据模型.第10部分:通用过程数据

Industrial automation systems and   integration－Physical device   control－Data model for computerized numerical   controllers－Part 10：General   process data

KS B ISO 14649-11-2015

工业自动化系统和集成.物理设备控制.计算机数值控制器用数据模型.第11部分:铣削用工艺数据

Industrial automation systems and   integration－Physical device   control－Data model for computerized numerical   controllers－Part 11：Process   data for milling

KS B ISO 14649-12-2015

工业自动化系统和集成.机械装置控制.计算机数控器用数据模型.第12部分:车削用过程数据

Industrial automation systems and   integration－Physical device   control－Data model for computerized numerical   controllers－Part 12：Process   data for turning

KS B ISO 14649-121-2015

工业自动化系统和集成.机械装置控制.计算机数控器用数据模型.第121部分:车床用工具

Industrial automation systems and   integration－Physical device   control－Data model for computerized numerical   controllers－Part 121：Tools   for turning machines

KS B ISO 14660-1-2005

产品几何量技术规范（GPS）－几何要素－第1部分：一般术语和定义

Geometrical Product Specifications(GPS)－Geometrical features－Part 1：General terms and definitions

KS B ISO 13212-2015

眼科光学.接触镜保护产品.储存寿命的测定指南

Ophthalmic optics－Contact lens care products－Guidelines for determination of shelf-life

KS B ISO 13253-2018

管道式空调器和热泵.性能试验和评价

Ducted air-conditioners and air-to-air heat   pumps — Testing and rating   for performance

KS B ISO 13256-1

水源热泵.性能试验和额定功率.第1部分:水-气和盐水-气热泵

Water-source heat pumps－Testing and rating for performance－Part 1：Water-to-air and brine-to-air heat   pumps

KS B ISO 13256-2

水源热泵.性能试验和额定功率.第1部分:水-气和盐水-气热泵

Water-source heat pumps — Testing and rating for performance — Part 2: Water-to-water and brine-to-water heat pumps

KS B ISO 13261-1

空调和空气源热泵设备的声功率额定值.第1部分:无室外管道设备

Sound power rating of air-conditioning and   air-source heat pump equipment－Part 1：Non-ducted outdoor equipment

KS B ISO 13261-2

空调和空气源热泵设备的声功率额定值.第1部分:无室外管道设备

Sound power rating of air－conditioning and air－source heat pump equipment－Part 2：Non－ducted indoor equipment

KS B ISO 1328-1

圆柱齿轮.ISO准确度制.第1部分:齿轮误差的定义及允许偏差值

Cylindrical gears－ISO system of accuracy－Part 1：Definitions and allowable values of   deviations relevant to corresponding flanks of gear teeth

KS B ISO 1328-2

圆柱齿轮.ISO准确度制.第1部分:齿轮误差的定义及允许偏差值

Cylindrical gears－ISO system of accuracy－Part 2：Definitions and allowable values of   deviations relevant to radial composite deviations and runout information

KS B ISO 13284-2013

叉车.叉形臂扩展部分和能自由伸缩的叉形臂.技术特性和强度要求

Fork-lift trucks－Fork-arm extensions and telescopic   fork arms－Technical characteristics and strength   requirements

KS B ISO 13333-2012

土方机械翻车机车体支架和司机室倾斜支架装置

Earth-moving machinery－Dumper body support and operator's   cab tilt support devices

KS B ISO 13337-2008

弹簧型直销.轻型,有槽的

Spring-type straight pins－Slotted, light duty

KS B ISO 13338-2014

气体或气体混合物的腐蚀性测定

Determination of tissue corrosiveness of a   gas or gas mixture

KS B ISO 13341-2015

移动气瓶.气瓶阀的装配

Transportable gas cylinders－Fitting of valves to gas cylinders

KS B ISO 13347-1

工业风扇.标准化实验室条件下风扇声功率级的测定.第1部分:总揽

Industrial fans－Determination of fan sound power   levels under standardized laboratory conditions－Part   1：General overview

KS B ISO 13347-2

工业风扇.标准化实验室条件下风扇声功率级的测定.第1部分:总揽

Industrial fans－Determination of fan sound power   levels under standardized laboratory conditions－Part   2：Reverberant room method

KS B ISO 13347-3

工业风扇.标准化实验室条件下风扇声功率级的测定.第1部分:总揽

Industrial fans－Determination of fan sound power   levels under standardized laboratory conditions－Part   3：Enveloping surface methods

KS B ISO 13347-4

工业风扇.标准化实验室条件下风扇声功率级的测定.第1部分:总揽

Industrial fans－Determination of fan sound power   levels under standardized laboratory conditions－Part   4：Sound intensity method

KS B ISO 13350-2001

工业风机.射流风机的性能测试

Industrial fans－Performance testing of jet fans

KS B ISO 13359-2014

封闭管道中导电液体流量的测量.法兰电磁流量计.总长

Measurement of conductive liquid flow in   closed conduits —   Flanged electromagnetic flowmeters — Overall length

KS B ISO 13372-2015

机器的工况监测和诊断.词汇

Condition monitoring and diagnostics of   machines－Vocabulary

KS B ISO 13373-1

条件监测和机械诊断.振动条件监测.第1部分:一般指南

Condition monitoring and diagnostics of   machines－Vibration condition   monitoring－Part 1：General   procedures

KS B ISO 13373-2

条件监测和机械诊断.振动条件监测.第1部分:一般指南

Condition monitoring and diagnostics of   machines —Vibration condition monitoring   — Part 2: Processing, analysis and presentation of   vibration data

KS B ISO 13373-3

条件监测和机械诊断.振动条件监测.第1部分:一般指南

Condition monitoring and diagnostics of   machines — Vibration condition   monitoring — Part 3:Guidelines for vibration   diagnosis)

KS B ISO 13374-1

机械状态的监测和诊断.数据处理、通信和表示.第1部分:一般指南

Condition monitoring and diagnostics of   machines－Data processing,   communication and presentation－Part 1：General guidelines

KS B ISO 13379-1

机器的工况监控和诊断.数据说明和诊断技术通用指南

Condition monitoring and diagnostics of   machines — Data interpretation   and diagnostics techniques — Part 1: General   guidelines

KS B ISO 13379-2

机器的工况监控和诊断.数据说明和诊断技术通用指南

Condition monitoring and diagnostics of   machines — Data interpretation   and diagnostics techniques — Part 2:Data-driven   applications

KS B ISO 13381-1

机械的状态监视与诊断.预报.第1部分:通则

Condition monitoring and diagnostics of   machines－Prognostics－Part 1：General guidelines

KS B ISO 13385-1

产品几何量技术规范（GPS）.尺寸测量设备.第1部分：卡尺.设计和计量特性

Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics

KS B ISO 13457-2014

农业灌溉设备.水驱动的化学制剂喷射泵

Agricultural irrigation equipment — Water-driven chemical injector pumps

KS B ISO 13459-2012

土方机械翻车机教练座椅罩

Earth-moving machinery－Dumpers－Trainer   seat-enclosure

KS B ISO 13482-2014

机器人和机器人装置.个人护理机器人的安全要求

Robots and robotic devices — Safety requirements for personal   care robots

KS B ISO 13503-3

石油和天然气工业.完井液和材料.第3部分:高比重卤水试验

Petroleum and natural gas industries－Completion fluids and materials－Part 3：Testing of heavy brines

KS B ISO 13503-6

石油和天然气工业.完井液和材料.第3部分:高比重卤水试验

Petroleum and natural gas industries -   Completion fluids and materials - Part 6: Procedure for measuring leakoff of   completion fluids under dynamic conditions

KS B ISO 13534-2007

石油和天然气工业.钻探和生产设备.提升设备的检验、维护、修理和再制造

Petroleum and natural gas industries－Drilling and production equipment－Inspection, maintenance, repair and remanufacture of hoisting   equipment

KS B ISO 13535-2007

石油和天然气工业.钻孔和生产设备.提升设备

Petroleum and natural gas industries－Drilling and production equipment－Hoisting equipment

KS B ISO 13539-2014

土方机械.挖沟机.定义和商业规格

Earth-moving machinery — Trenchers —   Definitions and commercial specifications

KS B ISO 13562-1

工业用变距卡车.第1部分：稳定性试验

Industrial variable-reach trucks — Part 1: Stability test

KS B ISO 13562-2

工业用伸缩式货车.第2部分：装卸长度为6米及以上货运集装箱的货车的附加稳定性试验

Industrial variable-reach trucks — Part 2: Additional stability tests   for trucks handling freight containers of length 6 m and above

KS B ISO 13563-2

单边负载叉车.第1部分:稳定性试验

Single side loading fork-lift trucks－Part 2：Additional   stability tests for trucks handling freight containers of 6 m length and   above

KS B ISO 13564-1

机动工业货车.能见度验证的试验方法.第1部分：10吨及以下的坐着和站着操作卡车和可变伸缩式卡车

Powered industrial trucks — Test methods for verification of   visibility — Part 1: Sit-on and stand-on operator   trucks and variable-reach trucks up to and including 10 t capacity

KS B ISO 13565-1

产品几何量技术规范(GPS).表面特征:轮廓法.表面分层功能特性.第1部分:筛选和一般测量条件

Geometrical Product Specifications(GPS) — Surface texture: Profile method;   Surfaces having stratified functional properties —   Part 1: Filtering and general measurement conditions

KS B ISO 13565-2

产品几何量技术规范(GPS).表面特征:轮廓法.表面分层功能特性.第1部分:筛选和一般测量条件

Geometrical Product Specifications(GPS) — Surface texture: Profile method;   Surfaces having stratified functional properties —   Part 2: Height characterization using the linear material ratio curve

KS B ISO 13565-3

产品几何量技术规范(GPS).表面特征:轮廓法.表面分层功能特性.第1部分:筛选和一般测量条件

Geometrical Product Specifications(GPS) — Surface texture: Profile method;   Surfaces having stratified functional properties —   Part 3: Height characterization using the material probability curve

KS B ISO 13579-1

工业炉及相关加工设备能量平衡和计算效率的测量方法第1部分：通用方法

Industrial furnaces and associated   processing equipment –   Method of measuring energy balance and calculating efficiency – Part 1: General methodology

KS B ISO 13579-2

工业炉及相关处理设备.能量平衡和计算效率的测量方法.第2部分：钢制加热炉

Industrial furnaces and associated   processing equipment —   Method of measuring energy balance and calculating efficiency — Part 2: Reheating furnaces for steel

KS B ISO 13579-3

工业炉及相关处理设备.能量平衡和计算效率的测量方法.第3部分：间歇式铝熔炼炉

Industrial furnaces and associated   processing equipment —   Method of measuring energy balance and calculating efficiency — Part 3: Batch-type aluminium melting furnaces

KS B ISO 13579-4

工业炉及相关处理设备.能量平衡和计算效率的测量方法.第4部分：有保护性或反应性气氛的炉

Industrial furnaces and associated   processing equipment —   Method of measuring energy balance and calculating efficiency — Part 4: Furnaces with protective or reactive atmosphere

KS B ISO 13584-1

工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议

Industrial automation systems and   integration－Parts library－Part 1：Overview and fundamental principles

KS B ISO 13584-101

工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议

Industrial automation systems and   integration－Parts library－Part 101：Geometrical view exchange   protocol by parametric program

KS B ISO 13584-20

工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议

Industrial automation systems and   integration－Parts library－Part 20：Logical resource：Logical model of expressions

KS B ISO 13584-24

工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议

Industrial automation systems and   integration－Parts library－Part 24：Logical resource：Logical model of supplier library

KS B ISO 13584-25

工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议

Industrial automation systems and   integration－Parts library－Part 25：Logical resource：Logical model of supplier library with aggregate values and   explicit content

KS B ISO 13584-26

工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议

Industrial automation systems and   integration－Parts library－ Part 26：Logical resource：Information supplier identification

KS B ISO 13584-31

工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议

Industrial automation systems and   integration－Parts library－Part 31：Implementation resources：Geometric programming interface

KS B ISO 13584-42

工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议

Industrial automation systems and   integration－Parts library－Part 42：Description methodology： Methodology for structuring part families

KS B ISO 13584-501

工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议

Industrial automation systems and   integration－Parts library－Part 501：Reference dictionary for   measuring instruments－Registration procedure

KS B ISO 13584-511

工业自动化系统和集成.零件库.第101部分:用参数编制的程序表示几何视图交换协议

Industrial automation systems and   integration－Parts library－Part 511：Mechanical systems and components   for general use－Reference dictionary for fasteners

KS B ISO 13588-2015

焊缝的无损检验.超声波检验.自动相控阵技术的使用

Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology

KS B ISO 13653-2006

光学和光学仪器.普通光学试验方法.象场中有关光辉的测量

Optics and optical instruments－General optical test methods－Measurement of relative irradiance in the image field

KS B ISO 13666-2014

眼科光学.眼镜镜片.词汇

Ophthalmic optics — Spectacle lenses — Vocabulary

KS B ISO 13694-2015

光学和光学设备.激光和有关激光的设备.激光束能量密度分布的试验方法

Optics and optical instruments — Lasers and laser-related equipment — Test methods for laser beam power[energy] density distribution

KS B ISO 13695-2015

道路车辆.直线行驶量化的试验方法.第1部分:中点控制试验

Optics and photonics — Lasers and laser-related equipment — Test methods for the spectral characteristics of lasers

KS B ISO 13696-2006

光学和光学仪器.用光学元件进行辐射散射的试验方法

Optics and optical instruments－Test methods for radiation scattered   by optical components

KS B ISO 13706-2009

石油和天然气工业.风冷热交换器

Petroleum and natural gas industries－Air cooled heat exchangers

KS B ISO 13753_2001-2016

机械振动与冲击.负荷下人体手.腕系对弹性物质传振动的测量与评价方法

Mechanical vibration and shock－Hand-arm vibration-Method for   measuring the vibration transmissibility of resilient materials when loaded   by the hand-arm system

KS B ISO 13766-2015

土方机械.电磁兼容性

Earth-moving machinery－Electromagnetic compatibility

KS B ISO 13770-2015

铝合金气瓶.避免瓶颈和瓶肩裂纹的操作要求

Aluminium alloy gas cylinders－Operational requirements for   avoidance of neck and shoulder cracks

KS B ISO 13772-2014

林业机械.便携式链锯.非手动链锯制动器的性能

Forestry machinery — Portable chain-saws — Non-manually actuated chain brake performance

KS B ISO 13849-1

机械安全.控制系统有关安全部件.第100部分:ISO13849-1的使用指南

Safety of machinery－Safety-related parts of control   systems－Part 1：General   principles for design

KS B ISO 13849-100

机械安全.控制系统有关安全部件.第100部分:ISO13849-1的使用指南

Safety of machinery－Safety-related parts of control   systems－Part 100：Guidelines   for the use and the application of ISO 13849－1

KS B ISO 13849-2

机械安全.控制系统有关安全部件.第100部分:ISO13849-1的使用指南

Safety of machinery－Safety－related   parts of control systems－Part 2：Validation

KS B ISO 13850-2017

机械安全.急停设计原则

Safety of machinery－Emergency stop－Principles for design

KS B ISO 13851-2003

机械安全.双手控制器.功能问题和设计原理

Safety of machinery－Two hand control devices－Fundamental aspects and design principles

KS B ISO 13854-2002

机械安全.避免人体部分挤压的最小间距

Safety of machinery－Minimum gaps to avoid crushing of   parts of the human body

KS B ISO 13855-2016

机械安全.保护设备相对于人体部位接近速度的定位

Safety of machinery－Positioning of protective equipment   with respect to the approach speeds of parts of the human body

KS B ISO 13856-1

机械安全.压敏保护装置.第1部分：压敏垫和压敏地板的设计和试验一般原则

Safety of machinery－Pressure-sensitive protective devices－Part 1：General principles for design and   testing of pressure-sensitive mats and pressure-sensitive floors

KS B ISO 13856-2

机械安全.压敏保护装置.第1部分：压敏垫和压敏地板的设计和试验一般原则

Safety of machinery－Pressure-sensitive protective devices－Part 2：General principles for the design   and testing of pressure-sensitive edges and pressure-sensitive bars

KS B ISO 13857-2016

机械安全.防止上肢和下肢触及危险区的安全距离

Safety of machinery — Safety distances to prevent hazard   zones being reached by upper and lower limbs

KS B ISO 13860-2017

林业机械.集运机.术语、定义和商业规范

Machinery for forestry－Forwarders－Terms,   definitions and commercial specifications

KS B ISO 13861-2002

林业机械.轮式集运机.术语、定义和商业规范

Machinery for forestry－Wheeled skidders－Terms, definitions and commercial specifications

KS B ISO 13862-2006

林业用机械.伐木归堆联合机.术语、定义和商业规范

Machinery for forestry－Feller-bunchers－Terms, definitions and commercial specifications

KS B ISO 13879-2004

石油和天然气工业.功能规范的内容和起草

Petroleum and natural gas industries－Content and drafting of a functional   specification

KS B ISO 13880-2004

石油和天然气工业.技术规范的内容和起草

Petroleum and natural gas industries－Content and drafting of a technical   specification

KS B ISO 13919-1

焊接.电子束和激光焊接头.缺陷的质量分级指南.第1部分:钢

Welding－Electron and laser-beam welded joints－Guidance   on quality levels for imperfections－Part 1：Steel

KS B ISO 13919-2

焊接.电子束和激光焊接头.缺陷的质量分级指南.第1部分:钢

Welding－Electron beam and laser beam welded joints－Guidance of quality levels for weld defects－Part 2：Aluminium and its alloys for   welding

KS B ISO 13984-2004

液压.道路车辆燃油系统界面

Liquid hydrogen－Land vehicle fuelling system   interface

KS B ISO 13985-2009

液态氢.陆地车辆燃料箱

Liquid hydrogen－Land vehicle fuel tanks

KS B ISO 14096-1

无损检验.射线摄影胶片数字化系统的鉴定.第1部分:定义、图像质量参数定量测量、标准参考胶片和定性控制

Non-destructive testing－Qualification of radiographic film   digitisation systems－Part 1：Definitions,   quantitative measurements of image quality parameters, standard reference   film and qualitative control

KS B ISO 14096-2

无损检验.射线摄影胶片数字化系统的鉴定.第1部分:定义、图像质量参数定量测量、标准参考胶片和定性控制

Non-destructive testing－Qualification of radiographic film   digitisation systems－Part 2：Minimum   requirements

KS B ISO 14104-2015

齿轮磨削后表面回火腐蚀检验

Gears－Surface temper etch inspection after grinding

KS B ISO 14112-2007

气焊设备.气焊及硬钎焊用小型设备

Gas welding equipment－Small kits for gas brazing and   welding

KS B ISO 14113-2015

气焊设备.最大设计压力为450bar的压缩空气和液化气用橡胶和塑料软管组件

Gas welding equipment－Rubber and plastic hoses assembled   for compressed or liquefied gases up to a maximum design pressure of 450 bar

KS B ISO 14118-2002

机械安全.防止意外启动

Safety of machinery－Prevention of unexpected start-up

KS B ISO 14119-2016

机械安全.带有联锁装置的保护装置.设计和选择原则

Safetu of machinery－Interlocking devices associated with   guards－Principles for design and selection

KS B ISO 14120-2017

机械安全.保护装置.固定和可移动保护装置的设计和制造的一般要求

Safe of machinery — Guards —   General requirements for the design and construction of fixed and movable   guards

KS B ISO 14122-1

机械安全.接近机械的固定方式.第1部分：两层间通道的固定方式的选择

Safety of machinery — Permanent means of access to   machinery — Part 1: Choice of fixed means of access   between two levels

KS B ISO 14122-2

机械安全.接近机械的固定方式.第1部分：两层间通道的固定方式的选择

Safety of machinery — Permanent means of access to   machinery — Part 2: Working platforms and walkways

KS B ISO 14122-3

机械安全.接近机械的固定方式.第1部分：两层间通道的固定方式的选择

Safety of machinery-permanent means of   access to machinery — Part   3: Stairs, stepladders and guard-rails

KS B ISO 14122-4

机械安全.接近机械的固定方式.第1部分：两层间通道的固定方式的选择

Safety of machinery — Permanent means of access to   machinery — Part 4: Fixed ladders

KS B ISO 14123-1

机械安全.减小用油机械排放的危害性物质对健康的风险.第1部分:用于机械制造商的原则和规范

Safety of machinery－Reduction of risks to health from   hazardous substances emitted by machinery－Part 1：Principles and specifications for machinery manufacturers

KS B ISO 14123-2

机械安全.减小用油机械排放的危害性物质对健康的风险.第1部分:用于机械制造商的原则和规范

Safety of machinery－ Reduction of risks to health from   hazardous substances emitted by machinery-Part 2 : Methodology leading to   verification procedures

KS B ISO 14132-1

光学和光学仪器.望远镜设备词汇.第1部分:通用术语和ISO14132中术语的字母索引

Optics and optical instruments－Vocabulary for telescopic systems－Part 1：General terms and alphabetical   indexes of terms in ISO 14132

KS B ISO 14132-2

光学和光学仪器.望远镜设备词汇.第1部分:通用术语和ISO14132中术语的字母索引

Optics and optical instruments－Vocabulary for telescopic systems－Part 2：Terms for binoculars, monoculars   and spotting scopes

KS B ISO 14132-3

光学和光学仪器.望远镜设备词汇.第1部分:通用术语和ISO14132中术语的字母索引

Optics and optical instruments－Vocabulary for telescopic systems－Part 3：Terms for telescopic sights

KS B ISO 14132-4

光学和光学仪器.望远镜设备词汇.第1部分:通用术语和ISO14132中术语的字母索引

Optics and optical instruments－Vocabulary for telescopic systems－Part 4：Terms for astronomical telescopes

KS B ISO 14135-1

光学和光学仪器.望远镜规范.第1部分:通用仪器

Optics and optical instruments－Specifications for telescopic sights－Part 1：General-purpose instruments

KS B ISO 14135-2

光学和光学仪器.望远镜规范.第1部分:通用仪器

Optics and optical instruments－Specifications for telescopic sights－Part 2：High-performance instruments

KS B ISO 14137-2016

机床.线切割机床(EDM丝)检验条件.术语及精度检验

Machine tools — Test conditions for wire   electrical-discharge machines(wire EDM) — Terminology   and testing of the accuracy

KS B ISO 14159-2004

机械安全.机械设计的卫生要求

Safety of machinery－Hygiene requirements for the design   of machinery

KS B ISO 14171-2014

焊料.非合金钢和细粒钢埋弧焊用焊丝和焊丝-焊剂混合物.分类

Welding consumables — Wire electrodes and wire-flux   combinations for submerged arc welding of non ally and fine grain steels — Classification

KS B ISO 14172-2016

焊接消耗品.镍及镍合金的手工电弧焊接用涂敷焊条.分类

Welding consumables－Covered electrodes for manual metal   arc welding of nickel and nickel alloys－Classification

KS B ISO 14174-2015

焊接耗材.埋弧焊熔剂.分类

Welding consumables－Fluxes for submerged arc welding－Classification