KS B ISO 14175-2008

焊接耗材.弧焊及切割用保护气体

Welding consumables－Shielding gases for arc welding and   cutting

KS B ISO 14246-2015

可搬运的储气罐.储气罐阀.制造试验和检验

Transportable gas cylinders－Gas cylinder valves－Manufacturing tests and inspections

KS B ISO 14253-1

产品几何量技术规范(GPS).工件的测量检验和测量设备.第1部分:按规范检验一致性或不一致性的判定规则

Geometrical product specifications(GPS) — Inspection by measurement of   workpieces and measuring equipment — Part 1: Decision   rules for proving conformity or nonconformity with specifications

KS B ISO 14253-2

产品几何量技术规范(GPS).工件的测量检验和测量设备.第1部分:按规范检验一致性或不一致性的判定规则

Geometrical product specifications(GPS) — Inspection by measurement of   workpieces and measuring equipment — Part 2: Guidance   for the estimation of uncertainty in GPS measurement, in calibration of   measuring equipment and in product verification

KS B ISO 14253-3

产品几何量技术规范(GPS).工件的测量检验和测量设备.第1部分:按规范检验一致性或不一致性的判定规则

Geometrical product specifications(GPS) — Inspection by measurement of   workpieces and measuring equipment — Part 3:   Guidelines for achieving agreements on measurement uncertainty statements

KS B ISO 14269-1

拖拉机和自行式农林机械.操作室环境.第1部分:词汇

Tractors and self-propelled machines for   agriculture and forestry－Operator enclosure environment－Part 1：Vocabulary

KS B ISO 14269-2

拖拉机和自行式农林机械.操作室环境.第1部分:词汇

Tractors and self-propelled machines for   agriculture and forestry－Operator enclosure environment－Part 2：Heating, ventilation and air-conditioning test method and   performance

KS B ISO 14269-3

拖拉机和自行式农林机械.操作室环境.第1部分:词汇

Tractors and self-propelled machines for   agriculture and forestry — Operator enclosure environment — Part 3:   Determination of effect of solar heating

KS B ISO 14269-4

拖拉机和自行式农林机械.操作室环境.第1部分:词汇

Tractors and self-propelled machines for   agriculture and forestry — Operator anclosure environment — Part 4:   Air filter element test method

KS B ISO 14269-5

拖拉机和自行式农林机械.操作室环境.第1部分:词汇

Tractors and self-propelled machines for   agriculture and forestry－Operator enclosure environment－Part 5：Pressurization system test method

KS B ISO 14271-2004

电阻点焊、凸焊和缝焊的维氏硬度试验(低荷载和微硬度)

Vickers hardness testing of resistance   spot, projection and seam welds(low load and microhardness)

KS B ISO 14272-2016

电阻点焊和凸焊交叉拉伸试验的样品尺寸和程序

Specimen dimensions and procedure for cross   tension testingresistance spot and embossed projection welded joints

KS B ISO 14273-2016

电阻点焊和凸焊抗剪试验的样品尺寸和程序

Specimen dimensions and procedure for shear   testingresistance spot and embossed projection welded joints

KS B ISO 14324-2016

电阻点焊焊缝的破坏性试验点焊接头疲劳试验方法

Resistance spot welding－Destructive tests of welds－Methods for the fatigue testing of spot welded joints

KS B ISO 14327-2004

电阻焊接.电阻点焊、凸焊和缝焊用可焊性瓣轮的测定规程

Resistance welding－Procedures for determining the   weldability lobe for resistance spot, projection and seam welding

KS B ISO 14341-2014

焊料.非合金钢和细粒钢金属气体保护焊用焊丝和溶敷金属.分类

Welding consumables — Wire electrodes and deposits for gas   shielded metal arc welding of non alloy and fine grain steels — Classification

KS B ISO 14343-2009

焊接消耗品—不锈钢和耐热钢电弧焊用丝电极、带电极、丝和杆—分类

Welding consumables－Wire electrodes, strip electrodes,   wires and rods for arc welding of stainless and heat resisting steels－Classification

KS B ISO 14344-2014

焊接和有关处理.焊剂和气体保护弧焊法.消耗品的采购导则

Welding consumables — Procurement of filler materials and   fluxes

KS B ISO 14372-2014

焊接耗材.通过测量扩散氢方法测定手工电弧焊焊条的抗湿性

Welding consumables — Determination of moisture resistance   of manual metal arc welding electrodes by measurement of diffusible hydrogen

KS B ISO 14373-2007

电阻焊.无涂层和有涂层低碳钢的点焊规程

Resistance welding－Procedure for spot welding of   uncoated and coated low carbon steels

KS B ISO 14397-1

土方机械.装载机和挖掘装载机.第1部分:验证计算的倾覆载荷额定工作容量和试验方法的计算

Earth-moving machinery－Loaders and backhoe loaders－Part 1：Calculation of rated operating   capacity and test method for verifying calculated tipping load

KS B ISO 14397-2

土方机械.装载机和挖掘装载机.第1部分:验证计算的倾覆载荷额定工作容量和试验方法的计算

Earth-moving machinery－Loaders and backhoe loaders－Part 2：Test method for measuring breakout   forces and lift capacity to maximum lift height

KS B ISO 14401-1

土方机械.监视和后视镜视野.第2部分:性能标准

Earth-moving machinery－Field of vision of surveillance and   rear-view mirrors－Part 1：Test   methods

KS B ISO 14401-2

土方机械.监视和后视镜视野.第2部分:性能标准

Earth-moving machinery — Field of vision of surveillance and   rear-view mirrors — Part 2: Performance criteria

KS B ISO 14405-1

产品几何量技术规范（GPS）.尺寸公差.第1部分：线性尺寸

Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes

KS B ISO 14405-2

产品几何量技术规范（GPS）.尺寸公差.第2部分：线性尺寸以外的尺寸

Geometrical product specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes

KS B ISO 14490-3

光学和光学仪器.望远系统的试验方法.第3部分:望远镜试验方法

Optics and optical instruments－Test methods for telescopic systems－Part 3：Test methods for telescopic sights

KS B ISO 14511-2014

封闭管道中流体流量的测量.热质流量计

Measurement of fluid flow in closed   conduits — Thermal mass   flowmeters

KS B ISO 14518-2017

起重机试验载荷要求

Cranes－Requirements for test loads

KS B ISO 14520-1

气体灭火系统.物理特性和系统设计.第1部分:一般要求

Gaseous fire-extinguishing systems－Physical properties and system design－Part 1：General requirements

KS B ISO 14520-15

气体灭火系统.物理特性和系统设计.第1部分:一般要求

Gaseous fire-extinguishing systems－Physical properties and system design－Part 15：IG-541 extinguishant

KS B ISO 14520-6

气体灭火系统.物理特性和系统设计.第1部分:一般要求

Gaseous fire-extinguishing systems－Physical properties and system design－Part 6：HCFC Blend A extinguishant

KS B ISO 14520-9

气体灭火系统.物理特性和系统设计.第1部分:一般要求

Gaseous fire-extinguishing systems－Physical properties and system design－Part 9：HFC 227ea extinguishant

KS B ISO 14534-2015

眼科光学.隐形眼镜和接触透镜保护产品.基本要求

Ophthalmic optics－Contact lenses and contact lens care   products－Fundamental requirements

KS B ISO 14539-2015

操作型工业机器人.用抓式钳子进行物品传递.词汇和特征表示

Manipulating industrial robots－Object handling with grasp-type   grippers－Vocabulary and presentation of characteristics

KS B ISO 14554-1

焊接质量要求.金属材料的电阻焊接.第1部分：综合质量要求

Quality requirement for welding -   Resistance welding of metallic materials -Part 1 : Comprehensive quality   requirements

KS B ISO 14554-2

焊接质量要求.金属材料的电阻焊接.第2部分：基本质量要求

Quality requirements for welding -   Resistance welding of metallic materials -Part 2 : Elementary quality   requirements

KS B ISO 14555-2015

焊接.金属材料的电弧螺栓焊

Welding－Arc stud welding of metallic materials

KS B ISO 14579-2004

内六角头螺钉

Hexalobular socket head cap screws

KS B ISO 14588-2007

盲铆钉.术语和定义

Blind rivets－Terminology and definitions

KS B ISO 14589-2007

盲铆钉.机械试验

Blind rivets－Mechanical testing

KS B ISO 14649-1

工业自动化系统与集成物理设备控制计算机数字控制器数据模型第1部分：概述和基本原理

Industrial automation systems and   integration－Physical device   control－Data model for computerized numerical   controllers－Part 1：Overview   and fundamental principles

KS B ISO 14649-10

工业自动化系统与集成物理设备控制计算机数字控制器数据模型第10部分：通用过程数据

Industrial automation systems and   integration－Physical device   control－Data model for computerized numerical   controllers－Part 10：General   process data

KS B ISO 14649-11

工业自动化系统与集成物理设备控制计算机数字控制器数据模型第11部分：铣削过程数据

Industrial automation systems and integration－Physical device control－Data model for computerized numerical controllers－Part 11：Process data for milling

KS B ISO 14649-12

工业自动化系统与集成物理设备控制计算机数字控制器数据模型第12部分：车削加工数据

Industrial automation systems and   integration－Physical device   control－Data model for computerized numerical   controllers－Part 12：Process   data for turning

KS B ISO 14649-121

工业自动化系统与集成物理设备控制计算机数字控制器数据模型第121部分：车床工具

Industrial automation systems and   integration－Physical device   control－Data model for computerized numerical   controllers－Part 121：Tools   for turning machines

KS B ISO 14660-3-2005

产品几何量技术规范（GPS）.几何特征.第2部分：圆柱体和圆锥体的提取中心线，提取中心表面，提取特征的局部尺寸

Geometrical Product Specifications (GPS) -   Geometrical features - Part 2: Extracted median line of a cylinder and a   cone, extracted median surface, local size of an extracted feature

KS B ISO 14687-2004

氢燃料.产品规范

Hydrogen fuel－Product specification

KS B ISO 14694-2004

工业风机.平衡质量和振动等级规范

Industrial fans－Specifications for balance quality   and vibration levels

KS B ISO 14695-2011

工业风机.风机振动的测量方法

Industrial fans－Method of measurement of fan   vibration

KS B ISO 14731-2016

焊接协作.任务及职责

Welding coordination－Tasks and responsibilities

KS B ISO 14744-1-2016

焊接.电子束焊接机器的验收检验.第1部分:原则和验收条件

Welding－Acceptance inspection of electron beam welding machines-Part 1：Principles and acceptance conditions

KS B ISO 14744-2-2016

焊接.电子束焊接机的验收检验.第2部分:加速电压特性的测量

Welding－Acceptance inspection of electron beam welding machines-Part 2：Measurement of accelerating voltage characteristics

KS B ISO 14744-3-2016

焊接.电子束焊接机的验收检验.第3部分:电子束电流特性的测量

Welding－Acceptance inspection of electron beam welding machines－Part 3：Measurement of beam current   characteristics

KS B ISO 14744-4-2016

焊接.电子束焊接机的验收检验.第4部分:焊接速度的测量

Welding－Acceptance inspection of electron beam welding machines－Part 4：Measurement of welding speed

KS B ISO 14744-5-2016

焊接.电子束焊接机的验收检验.第5部分:电子束径向跳动精确度的测量

Welding－Acceptance inspection of electron beam welding machines－Part 5：Measurement of run-out accuracy

KS B ISO 14744-6-2016

焊接.电子束焊接机的验收检验.第6部分:焊点位置稳定性的测量

Welding－Acceptance inspection of electron beam welding machines－Part 6：Measurement of stability of spot   position

KS B ISO 14798-2018

电梯、自动扶梯和载客输送机.风险分析方法学

Lifts(elevators), escalators and moving   walks — Risk assessment and   reduction methodology

KS B ISO 148-2-2004

金属材料.夏比摆式冲击试验.第2部分:试验机的验证

Metallic materials－Charpy pendulum impact test－Part 2：Verification of test machines

KS B ISO 14835-2-2008

机械振动与冲击评价外周血管功能的冷激发试验第2部分：手指收缩压的测量与评价

Mechanical vibration and shock－Cold provocation tests for the   assessment of peripheral vascular function－Part 2：Measurement and evaluation of finger systolic blood pressure

KS B ISO 14837-1-2008

机械振动.轨道交通空气噪声和振动.第1部分:总则

Mechanical vibration－Ground-borne noise and vibration   arising from rail systems－Part 1：General guidance

KS B ISO 14839-1-2013

机械振动.有主动磁性轴承的旋转机械装置.第1部分:词汇

Mechanical vibration－Vibration of rotating machinery   equipped with active magnetic bearings－Part 1：Vocabulary

KS B ISO 14839-2-2016

机械振动装有主动磁轴承的旋转机械振动第2部分：振动评定

Mechanical vibration－Vibration of rotating machinery   equippedwith active magnetic bearings－Part 2：Evaluation of vibration

KS B ISO 14839-3-2014

机械振动.装有主动磁轴承的旋转机械的振动.第3部分：稳定性裕度的评定

Mechanical vibration — Vibration of rotating machinery   equipped with active magnetic bearings — Part 3:   Evaluation of stability margin

KS B ISO 14847-2004

回转容积泵.技术要求

Rotary positive displacement pumps－Technical requirements

KS B ISO 14880-2-2018

光学和光子学.微透镜阵列.第2部分：波前像差的试验方法

Optics and photonics — Microlens arrays — Part 2: Test methods for wavefront aberrations

KS B ISO 14881-2006

整体光学.接口.与耦合特性有关的参数

Integrated optics－Interfaces－Parameters   relevant to coupling properties

KS B ISO 14889-2015

眼科光学.眼镜镜片.未切精加工眼镜片的基本要求

Ophthalmic optics－Spectacle lenses－Fundamental requirements for uncut finished lenses

KS B ISO 14955-1-2016

机床.机床的环境评估.第1部分:节能机床的设计方法

Machine tools — Environmental evaluation of machine   tools — Part 1: Design methodology for   energyefficient machine tools

KS B ISO 14963-2017

机械振动与冲击.桥梁和高架桥的动态试验和调查用指南

Mechanical vibration and shock－Guidelines for dynamic tests and   investigations on bridges and viaducts

KS B ISO 14964-2003

机械振动与冲击.固定结构物的振动.在振动测量和评价方面的质量管理的特殊要求

Mechanical vibration and shock－Vibration of stationary structures－Specific requirements for quality management in measurement and   evaluation of vibration

KS B ISO 14997-2014

光学和光学仪器.测定光学元件表面缺陷的试验方法

Optics and optical instruments — Test methods for surface   imperfections of optical elements

KS B ISO 14999-4-2016

光学和光子学.光学元件和光学系统的干涉仪测量.第4部分:ISO 10110中指定公差的注释和评定

Optics and photonics－Interferometric measurement of   optical elements and optical systems－Part 4：Interpretation and evaluation of tolerances specified in KS B ISO   10110

KS B ISO 15004-2013

眼科仪器.基本要求和试验方法

Ophthalmic instruments ― Fundamental requirements and test   methods

KS B ISO 15011-4-2007

焊接及相关工艺中的健康和安全.烟尘和气体取样的实验室方法.第4部分:烟尘数据表

Health and safety in welding and allied   processes－Laboratory method for   sampling fume and gases－Part 4：Fume data sheets

KS B ISO 15012-1-2015

焊接及相关工艺中的健康与安全空气过滤设备的要求试验和标记第1部分：焊接烟尘分离效率试验

Health and safety in welding and allied   processes－Requirements testing   and marking of equipment for air filtration－Part 1：Testing of the separation efficiency for welding fume

KS B ISO 15012-2-2016

焊接和相关工艺中的健康和安全.空气过滤设备的要求、试验和标记.第2部分：集气罩和喷嘴最小空气体积流量的测定

Health and safety in welding and allied   processes — Requirements, testing   and marking of equipment for air filtration — Part 2:   Determination of the minimum air volume flow rate of captor hoods and nozzles

KS B ISO 15042-2018

多功能空调及热泵的性能测试方法

Multiple split-system air conditioners and   air-to-air heat pumps —   Testing and rating for performance

KS B ISO 1505-2005

纺织机械.染整机器宽度.公称宽度的定义和范围

Textile maxhinery－Widths relating to dyeing and   finishing machines－ Definitions and range of nominal   widths

KS B ISO 15072-2007

米制细牙螺纹六角法兰面螺栓.小系列,产品等级A级

Hexagon bolts with flange with metric fine   pitch thread－Small series－Product grade A

KS B ISO 15077-2014

拖拉机和自助式农机械.驾驶员控制装置.启动动力、启动变位、启动场所和方法

Tractors and self-propelled machinery for   agriculture – Operator controls – Actuating forces, displacement, location and method of operation

KS B ISO 15078-2006

林业机械.原木装车机.双层驾驶员控制操作的位置和方法

Machinery for forestry－Log loaders－Location   and method of operation of two-lever operator controls

KS B ISO 15143-2-2012

土方机械和移动式道路施工机械.现场数据交换.第2部分:数据字典

Earth-moving machinery and mobile road   construction machinery－Worksite   data exchange－Part 2：Data   dictionary

KS B ISO 15156-1-2015

石油和天然气工业.石油制品和天然气生产中含硫化氢（H2S）环境下使用的材料.第1部分：耐破裂材料的一般选择指南

Petroleum and natural gas industries－Materials for use in H2S-containing   environments in oil and gas production－Part 1：General principles for selection of cracking-resistant materials

KS B ISO 15171-1-2005

流体动力和一般用途的连接－诊断用液压联轴器－第1部分：压力下非连接用联轴器

Connections for fluid power and general use－Hydraulic couplings for diagnostic   purposes－Part 1：Coupling not   for connection under pressure

KS B ISO 15212-2-2006

振荡式密度计第2部分：均质液体用工艺仪表

Oscillation-type density meters－Part 2：Process   instruments for homogeneous liquids

KS B ISO 15217-2005

流体传动系统和元件.带接地点的16mm方形电插头.特性和要求

Fluid power systems and components－16 mm square electrical connector   with earth contact－Characteristics and requirements

KS B ISO 15226-2002

技术产品文件生命周期模型及文件分配

Technical product documentation－Life cycle model and allocation of   documents

KS B ISO 15245-1-2015

气瓶.连接气瓶阀门的平行螺纹.第1部分：规范

Gas cylinders — Parallel threads for connection of   valves to gas cylinders — Part 1: Specification

KS B ISO 15245-2-2015

气瓶阀门与气瓶连接用平行螺纹第2部分：量规检验

Gas cylinders－Parallel threads for connection of valve to gas   cylinders－Part 2：Gauge   inspection

KS B ISO 15261-2017

产生振动和冲击的装置.术语

Vibration and shock generating systems－Vocabulary

KS B ISO 15296-2005

气焊设备.词汇.气焊设备术语

Gas welding equipment－Vocabulary－Terms   used for gas welding equipment

KS B ISO 15348-2003

管道工程.金属波纹管膨胀节.总则

Pipework－Metal bellows expansion joints－General

KS B ISO 15363-2003

金属材料.管式环液压试验

Metallic materials－Tube ring hydraulic pressure test

KS B ISO 15367-1-2004

激光及激光相关设备激光束波前形状试验方法第1部分：术语和基本方面

Lasers and laser-related equipment－Test methods for determination of the   shape of a laser beam wavefront－Part 1：Terminology and fundamental aspects

KS B ISO 15367-2-2015

激光和激光相关设备.激光束波前形状测定的试验方法.第2部分：Shark-Hartmann传感器

Lasers and laser-related equipment — Test methods for determination of   the shape of a laser beam wavefront — Part 2:   Shark-Hartmann sensors

KS B ISO 15368-2006

光学和光学仪器.平面的反射系数的测定和平行板透射率的测定

Optics and optical instruments－Measurement of reflectance of plane   surfaces and transmittance of plane parallel elements

KS B ISO 15407-1-2005

气动五气口方向控制阀，尺寸18mm和26mm－第1部分：不带电连接器的安装接口面

Pneumatic fluid power－Five-port directional control   valves,sizes 18 mm and 26 mm－Part 1：Mounting interface surfaces without electrical connector

KS B ISO 15465-2005

管道.带绕金属软管和软管组件

Pipework－Stripwound metal hoses and hose assemblies

KS B ISO 15482-2016

十字槽沉头自钻自攻螺钉

Cross recessed countersunk head drilling   screws with tapping screw thread

KS B ISO 15483-2001

十字槽沉头自攻螺钉

Cross recessed raised countersunk head   drilling screws with tapping screw thread

KS B ISO 15529-2011

光学和光子学.光学转移函数.取样成像系统的调制传递函数(MTF)的测量原理

Optics and photonics－Optical transfer function－Principles of measurement of modulation transfer function (MTF) of   sampled imaging systems

KS B ISO 15530-3-2015

产品几何量的技术规范(GPS).坐标测量仪(CMM):测量不确定度的测定技术.第3部分:校准工件或标准件的使用

Geometrical Product Specifications(GPS) — Coordinate measuring machines(CMM):   Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or standards

KS B ISO 15531-1-2007

工业自动化系统与集成工业制造管理数据第1部分：概述

Industrial automation systems and   integration－Industrial   manufacturing management data－Part 1：General overview

KS B ISO 15531-31-2006

工业自动化系统与集成工业制造管理数据第31部分：资源信息模型

Industrial automation systems and integration－Industrial manufacturing management   data－Part 31：Resource   information model

KS B ISO 15546-2006

石油和天然气工业.铝合金钻杆

Petroleum and natural gas industries－Aluminium alloy drill pipe

KS B ISO 15547-1-2016

石油、石化和天然气工业.板式热交换器.第1部分：板框式热交换器

Petroleum, petrochemical and natural gas   industries — Plate-type heat   exchangers — Part 1: Plate-and-frame heat exchangers

KS B ISO 15547-2-2016

石油、石化和天然气工业.板式热交换器.第2部分：铜焊铝板翅式热交换器

Petroleum, petrochemical and natural gas   industries — Plate-type heat   exchangers — Part 2: Brazed aluminium plate-fin heat   exchangers

KS B ISO 15547-2009

石油天然气工业板式换热器

Petroleum and natural gas industries－Plate heat exchangers

KS B ISO 15589-2-2014

石油、石化和天然气工业.管道运输系统的阴极保护.第2部分：海上管道

Petroleum, petrochemical and natural gas   industries — Cathodic protection   of pipeline transportation systems — Part 2: Offshore   pipelines

KS B ISO 15590-1-2006

石油天然气工业管道输送系统用感应弯管、配件和法兰第1部分：感应弯管

Petroleum and natural gas industries－Induction bends,fittings and flanges   for pipeline transportation systems－Part 1：Induction bends

KS B ISO 15590-2-2006

石油天然气工业管道输送系统用感应弯管、配件和法兰第2部分：配件

Petroleum and natural gas industries－Induction bends, fittings and flanges   for pipeline transportation systems－Part 2：Fittings

KS B ISO 15590-3-2006

石油天然气工业管道输送系统用感应弯管、配件和法兰第3部分：法兰

Petroleum and natural gas industries－Induction bends, fittings and flanges   for pipeline transportation systems－Part 3：Flanges

KS B ISO 15600-2002

模铸工具.注塑模用隔热板

Tools for moulding－Thermal insulating sheets for   injection moulds

KS B ISO 15601-2017

锤子.钢锤头相关技术规范.试验规程

Hammers — Technical specifications concerning steel hammer heads — Test procedures

KS B ISO 15607-2007

金属材料焊接程序规范和合格鉴定.总则

Specification and qualification of welding   procedures for metallic materials－General rules

KS B ISO 15608-2003

焊接.金属材料分类体系指南

Welding－Guidelines for a metallic materials grouping system

KS B ISO 15609-2-2003

金属焊接工艺规程及认可焊接工艺规程第2部分：气焊

Specification and approval of welding   procedures for metallic materials－Welding procedure specification－Part 2：Gas welding

KS B ISO 15609-3-2009

金属焊接工艺规程及评定焊接工艺规程第3部分：电子束焊接

Specification and qualification of welding   procedures for metallic materials－Welding procedure specification－Part 3：Electron beam welding

KS B ISO 15609-4-2009

金属焊接工艺规程及评定焊接工艺规程第4部分：激光束焊接

Specification and qualification of welding   procedures for metallic materials－Welding procedure specification－ Part 4：Laser beam welding

KS B ISO 15609-5-2014

金属材料焊接程序的规范和合格评定焊接程序规范第5部分：电阻焊

Specification and qualification of welding   procedures for metallic materials — Welding procedure specification — Part   5:Resistance welding

KS B ISO 15610-2003

金属材料焊接程序规范和合格鉴定.基于试验焊接消耗品的合格鉴定

Specification and qualification of welding   procedures for metallic materials－Qualification based on tested welding consumables

KS B ISO 15611-2003

金属材料焊接程序规范和合格鉴定.根据已有焊接经验进行合格鉴定

Specification and qualification of welding   procedures for metallic materials－Qualification based on previous welding experience

KS B ISO 15612-2016

金属材料焊接工艺规程及认可.采用的标准焊接工艺认可

Specification and qualification of welding   procedures for metallic materials－Qualification by adoption of a standard welding procedure

KS B ISO 15613-2003

金属材料的焊接程序规范和鉴定.基于预生产焊接试验的鉴定

Specification and qualification of welding   procedures for metallic materials－Qualification based on pre-production welding test

KS B ISO 15614-1-2007

金属焊接工艺规程及评定焊接工艺试验第1部分：钢的电弧焊、气焊和镍及镍合金的电弧焊

Specification and qualification of welding   procedures for metallic materials－Welding procedure test－Part 1 : Arc and   gas welding of steels and arc welding of nickel and nickel alloys

KS B ISO 15614-10-2016

金属焊接工艺规程及评定焊接工艺试验第10部分：高压干焊

Specification and qualification of welding   procedures for metallic materials－Welding procedure test－Part 10：Hyperbaric dry welding

KS B ISO 15614-12-2015

金属焊接工艺规程及评定焊接工艺试验第12部分：点焊、缝焊和凸焊

Specification and qualification of welding   procedures for metallic materials－Welding procedure test－Part 12：Spot, seam and projection welding

KS B ISO 15614-13-2015

金属焊接工艺规程及评定焊接工艺试验第13部分：电阻对接和闪光焊

Specification and qualification of welding   procedures for metallic materials－Welding procedure test－Part 13：Resistance butt and flash welding

KS B ISO 15614-2-2007

金属焊接工艺规程及评定焊接工艺试验第2部分：铝的电弧焊

Specification and qualification of welding   procedures for metallic materials－Welding procedure test－Part 2：Arc welding of aluminium

KS B ISO 15614-4-2016

金属焊接工艺规程及评定焊接工艺试验第4部分：铝铸件的精焊

Specification and qualification of welding   procedures for metallic materials－Welding procedure test－Part 4：Finishing welding of aluminium castings

KS B ISO 15614-5-2016

金属焊接工艺规程及评定焊接工艺试验第5部分：钛、锆及其合金的电弧焊

Specification and qualification of welding   procedures for metallic materials－Welding procedure test－Part 5：Arc welding of titanium, zirconium and their alloys

KS B ISO 15614-7-2008

金属焊接工艺规程及评定焊接工艺试验第7部分：堆焊

Specification and qualification of welding   procedures for metallic materials－Welding procedure test－Part 7：Overlay welding

KS B ISO 15614-8-2003

金属焊接工艺规程及认可焊接工艺试验第8部分：管与管板接头的焊接

Specification and approval of welding   procedures for metallic materials－Welding procedures test－Part 8：Welding of tubes to tube－plate joints

KS B ISO 15615-2014

气焊设备.焊接、切割和相关工艺用乙炔复式接头系统.高压装置的安全要求

Gas welding equipment — Acetylene manifold systems for   welding, cutting and allied processes — Safety   requirements in high-pressure devices

KS B ISO 15616-1-2003

高质量焊接和切割用CO2激光束机的验收试验第1部分：一般原则和验收条件

Acceptance tests for CO2－laser beam machines for high quality   welding and cutting－Part 1：General   principles, acceptance conditions

KS B ISO 15616-2-2003

高质量焊接和切割用CO2激光束机的验收试验第2部分：静态和动态精度的测量

Acceptance tests for CO2－laser beam machines for high quality   welding and cutting－Part 2：Measurement   of static and dynamic accuracy

KS B ISO 15616-3-2008

高质量焊接和切割用CO2激光束机的验收试验第3部分：气体流量和压力测量仪器的校准

Acceptance tests for CO2-laser beam   machines for high quality welding and cutting－Part 3：Calibration of   instruments for measurement of gas flow and pressure

KS B ISO 15618-1-2008

水下焊接焊工资格考试第1部分：高压湿焊潜水员焊工

Qualification testing of welders for   underwater welding－Part   1：Diver-welders for hyperbaric wet welding

KS B ISO 15618-2-2004

水下焊接焊工资格考试第2部分：潜水焊工和高压干焊焊接操作工

Qualification testing of welders for   underwater welding－Part   2：Diver-welders and welding operators for hyperbaric   dry welding

KS B ISO 15626-2014

焊缝无损试验. 衍射时差法超声检测技术(TOFD). 验收标准

Non-destructive testing of welds — Time-of-flight diffraction   technique(TOFD) — Acceptance levels

KS B ISO 15641-2005

高速机械加工用铣刀.安全要求

Milling cutters for high speed machining－Safety requirements

KS B ISO 15643-2014

道路建筑和养护设备.沥青粘合剂布料/喷料机.术语和商业规范

Road construction and maintenance equipment   — Bituminous binder   spreaders/sprayers — Terminology and commercial   specifications

KS B ISO 15644-2011

道路建筑和养护设备.碎屑延辗机.术语和商业规范

Road construction and maintenance equipment－Chippings spreaders－Terminology and commercial specifications

KS B ISO 15645-2014

道路建筑和维修设备.路面切槽机.术语和商业规范

Road construction and maintenance equipment   — Road milling   machinery — Terminology and commercial specifications

KS B ISO 15688-2014

道路建设和维护设备.土壤稳定剂.术语和商用规范

Road construction and maintenance equipment   — Soil stabilizers — Terminology and commercial specifications

KS B ISO 15689-2011

修路和保养设备.粉末粘接喷涂机.术语和商业规范

Road construction and maintenance equipment－Powder binder spreaders－Terminology and commercial specifications

KS B ISO 15704-2004

工业自动化系统.企业参考体系结构和方法论的需求

Industrial automation systems－Requirements for enterprise-reference   architectures and methodologies

KS B ISO 15708-2-2008

无损检测辐射法计算机断层摄影第2部分：检验方法

Non-destructive testing－Radiation methods－Computed tomography－Part 2：Examination practices

KS B ISO 15744-2005

手持非电动工具.噪声测量代码.工程法(2级)

Hand－held non－electric power tools－Noise measurement code－Engineering   method(grade 2)

KS B ISO 15745-1-2004

工业自动化系统与集成开放系统应用集成框架第1部分：通用参考描述

Industrial automation systems and   integration－Open systems   application integration framework－Part 1：Generic reference description

KS B ISO 15792-1-2004

焊接消耗品试验方法第1部分：钢、镍和镍合金中全焊接金属试样的试验方法

Welding consumables－Test methods－Part   1：Test methods fo all-weld metal test specimens in   steel,nickel and nickel alloys

KS B ISO 15817-2014

土方机械.操作人员遥控安全要求

Earth-moving machinery — Safety requirements for remote   operator control systems

KS B ISO 15848-1-2007

工业阀门无组织排放的测量、试验和鉴定程序第1部分：阀门型式试验的分类系统和鉴定程序

Industrial valves－Measurement, test and qualification   procedures for fugitive emissions－Part 1：Classification system and qualification procedures for type   testing of valves

KS B ISO 15871-2018

工业用货车.集装箱搬运和抓钩臂操作用指示灯规范

Industrial trucks — Specification for indicator lights   for container handling and grappler arm operations

KS B ISO 15878-2012

道路建设与保修机械.沥青铺路材料.术语与商业规范

Road construction and maintenance equipment－Asphalt pavers－Terminology and commercial specifications

KS B ISO 15902-2018

光学和光学仪器.衍射光学.词汇

Optics and photonics — Diffractive optics — Vocabulary

KS B ISO 15926-1-2006

工业自动化系统与集成包括油气生产设施在内的加工厂生命周期数据集成第1部分：概述和基本原理

Industrial automation systems and   integration－Integration of   life-cycle data for process plants including oil and gas production   facilities－Part 1：Overview   and fundamental principles

KS B ISO 15926-2-2006

工业自动化系统与集成包括油气生产设施在内的加工厂生命周期数据集成第2部分：数据模型

Industrial automation systems and   integration－Integration of   life-cycle data for process plants including oil and gas production   facilities－Part 2：Data model

KS B ISO 15973-2008

封闭型盘头抽芯盲铆钉AIA/St

Closed end blind rivets with break pull   mandrel and protruding head－AIA/St

KS B ISO 15974-2008

封闭型沉头抽芯盲铆钉AIA/St

Closed end blind rivets with break pull   mandrel and countersunk head－AIA/St

KS B ISO 15975-2005

封闭型盘头抽芯盲铆钉.AI/AIA

Closed end blind rivets with break pull   mandrel and protruding head－AI/AIA

KS B ISO 15976-2005

封闭型平圆头抽芯铆钉.St/St

Closed end blind rivets with break pull   mandrel and protruding head－St/St

KS B ISO 15977-2004

开口型平圆头抽芯铆钉.AIA/St

Open end blind rivets with break pull   mandrel and protruding head－AlA/St

KS B ISO 15978-2004

开口型沉头抽芯铆钉.AIA/St

Open end blind rivets with break pull   mandrel and countersunk head－AlA/St

KS B ISO 15979-2004

开口型平圆头抽芯铆钉.St/St

Open end blind rivets with break pull   mandrel and protruding head－St/St

KS B ISO 15980-2004

开口型沉头抽芯铆钉.St/St

Open end blind rivets with break pull   mandrel and countersunk head－St/St

KS B ISO 15981-2004

开口型平圆头抽芯铆钉.AIA/AIA

Open end blind rivets with break pull   mandrel and protruding head－AlA/AlA

KS B ISO 15982-2004

开口型沉头抽芯铆钉.AIA/AIA

Open end blind rivets with break pull   mandrel and countersunk head－AlA/AlA

KS B ISO 15983-2004

开口型平圆头抽芯铆钉.A2/A2

Open end blind rivets with break pull   mandrel and protruding head－A2/A2

KS B ISO 15984-2004

开口型沉头抽芯铆钉.A2/A2

Open end blind rivets with break pull   mandrel and countersunk head－A2/A2

KS B ISO 15996-2006

气瓶.剩余压力控制阀.一般要求和型式试验

Gas cylinders－Residual pressure valves－General   requirements and type testing

KS B ISO 15998-2-2014

土方机械.设备、使用电子元件装备控制系统(MCS).第2部分:KS B   ISO 15998的使用和应用

Earth-moving machinery — Machine control systems(MCS) using   electronic components — Part 2: Use and application   of ISO 15998

KS B ISO 15998-2014

土方机械.设备、使用电子元件装备控制系统(MCS).机能安全性的性能标准与试验

Earth-moving machinery — Machine control systems(MCS) using   electronic components — Performance criteria and   tests for functional safety

KS B ISO 16001-2012

土方机械.危险检测系统与视力保护装置.性能要求事项与测试

Earth-moving machinery－Hazard detection systems and visual   aids－Performance requirements and tests

KS B ISO 16015-2014

产品的几何量技术规范(GPS).由于热的影响造成长度测量的系统误差和测量不确定度

Geometrical Product Specifications(GPS) — Systematic errors and contributions   to measurement uncertainty of length measurement due to thermal influences

KS B ISO 16028-2004

液压传动.用于压力为20MPa(200bar)～31.5MPa(315bar)的平面对接型快速接头.规范

Hydraulic fluid power－Flush－face   type, quick－action couplings for use at pressures of   20∼31.5   MPa－Specifications

KS B ISO 16047-2008

紧固件.力矩/夹紧力试验

Fasteners－Torque/clamp force testing

KS B ISO 16063-1-2003

振动冲击传感器校准方法第1部分：基本概念

Methods for the calibration of vibration   and shock transducers－Part   1：Basic concepts

KS B ISO 16063-11-2003

振动与冲击传感器校准方法第11部分：激光干涉法振动一次校准

Methods for the calibration of vibration   and shock transducers－Part   11：Primary vibration calibration by laser   interferometry

KS B ISO 16063-12-2013

振动冲击传感器校准方法第12部分：互易法一次振动校准

Methods for the calibration of vibration   and shock transducers－Part   12：Primary vibration calibration by the reciprocity   method

KS B ISO 16063-13-2003

振动与冲击传感器校准方法第13部分：激光干涉法一次冲击校准

Methods for the calibration of vibration   and shock transducers－Part   13：Primary shock calibration using laser   interferometry

KS B ISO 16063-15-2009

振动与冲击传感器校准方法第15部分：激光干涉法一次角振动校准

Methods for the calibration of vibration   and shock transducers－   Part 15：Primary angular vibration calibration by   laser interferometry

KS B ISO 16063-16-2016

振动和冲击传感器的校准方法.第16部分：用地球引力校准

Methods for the calibration of vibration   and shock transducers —Part   16: Calibration by Earth's gravitation

KS B ISO 16063-17-2018

振动和冲击传感器的校准方法.第17部分：离心机一次校准

Methods for the calibration of vibration   and shock transducers —   Part 17:Primary calibration by centrifuge

KS B ISO 16063-21-2013

振动与冲击传感器校准方法第21部分：与基准传感器比较的振动校准

Methods for the calibration of vibration   and shock transducers－Part   21：Vibration calibration by comparison to a reference   transducer

KS B ISO 16063-22-2008

振动与冲击传感器校准方法第22部分：与基准传感器比较的冲击校准

Methods for the calibration of vibration   and shock transducers－Part   22：Shock calibration by comparison to a reference   transducer

KS B ISO 16063-31-2014

振动和冲击传感器的校准方法.第31部分：横向振动灵敏度试验

Method for the calibration of vibration and   shock transducers —   Part 31: Testing of transverse vibration sensitivity

KS B ISO 16063-32-2018

振动和冲击传感器的校准方法.第32部分：共振试验.用冲击激励法测试加速度计的频率和相位响应

Methods for the calibration of vibration   and shock transducers —   Part 32:Resonance testing — Testing the frequency and   the phase response of accelerometers by means of shock excitation

KS B ISO 16063-42-2017

振动和冲击传感器的校准方法第42部分：利用重力加速度校准高精度地震计

Methods for the calibration of vibration   and shock transducers —   Part 42: Calibration of seismometers with high accuracy using acceleration of   gravity

KS B ISO 16063-43-2017

振动和冲击传感器的校准方法.第43部分：用基于模型的参数识别法校准加速度计

Methods for the calibration of vibration   and shock transducers —   Part 43: Calibration of accelerometers by model-based parameter   identification

KS B ISO 16064-41-2018

振动和冲击传感器的校准方法.第41部分：激光振动计的校准

Methods for the calibration of vibration   and shock transducers —   Part 41:Calibration of laser vibrometers

KS B ISO 1607-1-2004

容积式真空泵性能测量第1部分：容积流量（泵速）的测量

Positive-displacement vacuum pumps－Measurement of performance   characteristics－Part 1：Measurement   of volume rate of flow(pumping speed)

KS B ISO 1609-2008

真空技术.法兰尺寸

Vacuum technology－Flange dimensions

KS B ISO 16100-1-2004

工业自动化系统与集成制造软件互操作性能力概要第1部分：框架

Industrial automation systems and   integration－Manufacturing software   capability profiling for interoperability－Part 1：Framework

KS B ISO 16132-2005

球墨铸铁管和配件.水泥灰浆衬套的封装层

Ductile iron pipes and fittings－Seal coats for cement mortar linings

KS B ISO 16156-2014

机床安全性.工件夹具用卡盘的设计和建造的安全性要求

Machine-tools safety — Safety requirements for the design   and construction of work holding chucks

KS B ISO 16330-2005

往复式容积泵和泵装置.技术要求

Reciprocating positive displacement pumps   and pump units－Technical requirements

KS B ISO 16367-2012

冲压工具.导板U-和V-模块

Tools for pressing－Guide plates－U   and V blocks

KS B ISO 16368-2016

移动式升降工作台.设计计算、安全要求和试验方法

Mobile elevating work platforms－Design, calculations, safety   requirements and test methods