技术性贸易措施公共服务平台
金属类标准（三）
2019-07-23 20:43标准号 | 中文名称 | 英文名称 |
KS D ISO 3112-2002 | 铜和铜合金.铅含量的测定.萃取滴定法 | Copper and copper alloys－Determination of lead －Extracting titration method |
KS D ISO 3220-2003 | 铜和铜合金.砷含量的测定.光度法 | Copper and copper alloys－Determination of arsenic－Photometric method |
KS D ISO 3255-2002 | 镁和镁合金.铝含量的测定.铬天青S光度法 | Magnesium and magnesium alloys－Determination of aluminum－Chromazurol S photometric method |
KS D ISO 3256-2002 | 铝和铝合金.镁含量的测定.原子吸收分光光度法 | Aluminum and aluminum alloys－Determination of magnesium－Atomic absorption spectrophotometric method |
KS D ISO 3306-2003 | 焊后定径光端精密钢管.交货技术条件 | Plain end as-welded and sized precision steel tubes－Technical conditions for delivery |
KS D ISO 3497-2002 | 金属覆盖层.镀层厚度的测量.X射线光谱法 | Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods |
KS D ISO 3543-2002 | 金属和非金属覆盖层.厚度测量.β射线背散射法 | Metallic and non-metallic coatings－Measurement of thickness－Beta backscatter method |
KS D ISO 3545-1-2005 | 钢管及管件规范用符号第1部分：圆截面钢管及管件附件 | Steel tubes and fittings－Symbols for use in specifications－Part 1：Tubes and tubular accessories with circular cross-section |
KS D ISO 3545-2-2005 | 钢管及管件规范用符号第2部分：方形和矩形空心型钢 | Steel tubes and fittings－Symbols for use in specifications－Part 2：Square and rectangular hollow sections |
KS D ISO 3545-3-2005 | 钢管及管件规范用符号第3部分：圆截面管件 | Steel tubes and fittings－Symbols for use in specifications－Part 3：Tubular fittings with circular cross-section |
KS D ISO 3613-2012 | 锌、镉、铝锌合金和锌铝合金的铬酸盐转化膜.试验方法 | Metallic and other inorganic coatings－Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys－Test methods |
KS D ISO 3651-1-2004 | 不锈钢耐晶间腐蚀性的测定.第1部分：奥氏体和铁素体奥氏体（双相）不锈钢.用质量损失测量法在硝酸介质中的腐蚀试验（休伊试验） | Determination of resistance to intergranular corrosion of stainless steels - Part 1 Austenitic and ferritic austenitic(duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass(Huey test) |
KS D ISO 3651-2-2014 | 不锈钢抗晶间腐蚀的测定第2部分：铁素体、奥氏体和铁素体-奥氏体（双相）不锈钢在含硫酸介质中的腐蚀试验 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
KS D ISO 3713-2003 | 铁合金.取样和样品制备.一般规则 | Ferroalloys－Sampling and preparation of samples－General rules |
KS D ISO 3750-2012 | 锌合金.镁含量的测定.火焰原子吸收光谱法 | Zinc alloys－Determination of magnesium content－Flame atomic absorption spectrometric method |
KS D ISO 3763-2002 | 钢材.评定非金属夹杂物含量的宏观方法 | Wrought steels－Macroscopic methods for assessing the content of non－metallic inclusions |
KS D ISO 3815-1-2006 | 锌及锌合金第1部分：固体样品的光发射光谱分析 | Zinc and zinc alloys－Part 1：Analysis of solid samples by optical emission spectrometry |
KS D ISO 3815-2-2006 | 锌及锌合金第2部分：电感耦合等离子体发射光谱法分析 | Zinc and zinc alloys－Part 2：Analysis by inductively coupled plasma optical emission spectrometry |
KS D ISO 3868-2002 | 金属和其他无机覆盖层.镀层厚度的测量.裴索多光束干涉仪法 | Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method |
KS D ISO 3882-2012 | 金属和其他无机物覆层.厚度测量方法述评 | Metallic and other inorganic coatings－Review of methods of measurement of thickness |
KS D ISO 3892-2002 | 金属材料上的转化膜.单位面积膜层质量的测定.重量法 | Conversion coatings on metallic materials－Determination of coating mass per unit area－Gravimetric methods |
KS D ISO 3907-2010 | 硬质合金.总碳量的测定.重量法 | Hardmetals－Determination of total carbon－Gravimetric method |
KS D ISO 3908-2010 | 硬质合金.不溶性(游离)碳含量的测定.重量法 | Hardmetals－Determination of insoluble(free) carbon－Gravimetric method |
KS D ISO 3909-2002 | 硬质合金.钴含量的测定.电位滴定法 | Hardmetals－Determination of cobalt －Potentiometric method |
KS D ISO 3923-1-2009 | 金属粉末表观密度的测定第1部分：漏斗法 | Metallic powders－Determination of apparent density－Part 1：Funnel method |
KS D ISO 3927-2012 | 金属粉末（不包括硬质合金粉末）－单轴压缩可压缩性（压缩性）的测定 | Metallic powders, excluding powders for hardmetals－Determination of compactibility(compressibility) in uniaxial compression |
KS D ISO 3928-2004 | 烧结金属材料,不包括硬质金属.疲劳试验试样 | Sintered metal materials, excluding hardmetals－Fatigue test pieces |
KS D ISO 3979-2002 | 铝和铝合金.镍含量的测定.丁二酮肟分光光度法 | Aluminium and aluminium alloys－Determination of nickel－Spectrophotometric method using dimethylglyoxime |
KS D ISO 3980-2002 | 铝和铝合金.铜含量的测定.原子吸收分光光度法 | Aluminium and aluminium alloys：Determination of copper content－Atomic absorption spectrophotometric method |
KS D ISO 3981-2002 | 铝和铝合金.镍含量的测定.原子吸收分光光度法 | Aluminum and aluminum alloys - Determination of nickel－Atomic absorption spectrophotometric method |
KS D ISO 4058-2002 | 镁和镁合金.镍含量的测定.丁二酮肟光度法 | Magnesium and magnesium alloys－Determination of nickel－Spectrophotometric method using dimethylglyoxime |
KS D ISO 4139-2002 | 硅铁合金.铝含量的测定.火焰原子吸收光谱法 | Ferrosilicon－Determination of aluminium content－Flame atomic absorption spectrometric method |
KS D ISO 4140-2008 | 铬铁和硅铬铁铬含量的测定电位滴定法 | Ferrochromium and ferrosilicochromium－Determination of chromium content－Potentiomentric mehtod |
KS D ISO 4158-2002 | 硅铁合金、硅锰铁和硅铬铁.硅含量的测定.重量法 | Ferrosilicon, ferrosilicomanganese and ferrosilicochromium－Determination of sillicon content－Gravimetric method |
KS D ISO 4159-2002 | 锰铁和硅锰铁.锰含量的测定.电势法 | Ferromanganese and ferrosilicomanganese－Determination of manganese content－Potentiometric method |
KS D ISO 4173-2002 | 钼铁.钼含量的测定.重量法 | Ferromolybdenum－Determination of molybdenum content－Gravimetric method |
KS D ISO 4192-2002 | 铝和铝合金.铅含量的测定.火焰原子吸收光谱法 | Aluminium and aluminium alloys－Determination of lead content－Flame atomic absorption spectrometric method |
KS D ISO 4193-2002 | 铝和铝合金.铬含量的测定.火焰原子吸收光谱法 | Aluminum and aluminum alloys－Determination of chromium content－Flame atomic absorption spectrophotometric method |
KS D ISO 4194-2002 | 镁合金.锌含量的测定.火焰原子吸收光谱法 | Magnesium alloys－Determination of zinc content－Flame atomic absorption spectrometric method |
KS D ISO 4200-2005 | 光端焊接和无缝钢管.管的尺寸和单位长度重量的一览表 | Plain end steel tubes, welded and seamless－General tables of dimensions and masses per unit length |
KS D ISO 437-2001 | 钢铁及铸铁总碳含量的测定燃烧重量法 | Steel and cast iron－Determination of total carbon content－Combustion gravimetric method |
KS D ISO 439-2002 | 钢和铁.全硅量的测定.重量分析法 | Steel and iron－Determination of total silicon content－Gravimetric method |
KS D ISO 4491-1-2008 | 金属粉末还原法测定氧含量第1部分：总则 | Metallic powders－Determination of oxygen content by reduction methods－Part 1：General guidelines |
KS D ISO 4491-2-2008 | 金属粉末氧含量的测定还原法第2部分：氢还原质量损失（氢损失） | Metallic powders－Determination of oxygen content by reduction methods－Part 2：Loss of mass on hydrogen reduction (hydrogen loss) |
KS D ISO 4491-3-2008 | 金属粉末氧含量的测定还原法第3部分：氢还原氧 | Metallic powders－Determination of oxygen content by reduction methods－Part 3：Hydrogen reducible oxygen |
KS D ISO 4491-4-2003 | 金属粉末还原法测定氧含量第4部分：还原萃取总氧 | Metallic powders－Determination of oxygen content by reduction methods－Part 4：Total oxygen by reduction-extraction |
KS D ISO 4492-2004 | 金属粉末（不包括硬质合金粉末）－与压实和烧结有关的尺寸变化的测定 | Metallic powders, excluding powders for hardmetals－Determination of dimensional changes associated with compacting and sintering |
KS D ISO 4496-2003 | 金属粉末铁、铜、锡、青铜粉末中酸不溶物含量的测定 | Metallic powders－Determination of acid-insoluble content in iron, copper,tin and bronze powders |
KS D ISO 4497-2004 | 金属粉末粒度的测定干筛法 | Metallic powders－Determination of particle size by dry sieving |
KS D ISO 4499-1-2009 | 硬质合金显微组织的金相测定第1部分：显微照片和说明 | Hardmetals－Metallographic determination of microstructure－Part 1：Photomicrographs and description |
KS D ISO 4499-2-2009 | 硬质合金显微组织的金相测定第2部分：WC晶粒度的测定 | Hardmetals－Metallographic determination of microstructure－Part 2：Measurement of WC grain size |
KS D ISO 4501-2003 | 硬质合金中钛含量的测定.过氧化物光度法 | Hardmetals－Determination of titanium－Photometric peroxide method |
KS D ISO 4503-2003 | 硬质合金.用X射线荧光测定金属元素的含量.熔化法 | Hardmetals－Determination of contents of metallic elements by X-ray fluorescence－Fusion method |
KS D ISO 4505-2008 | 硬质合金气孔率和游离碳的金相测定 | Hardmetals－Metallographic determination of porosity and uncombined carbon |
KS D ISO 4507-2004 | 渗碳或碳氮共渗的烧结铁基材料.用微硬度试验测定和验证硬化层的深度 | Sintered ferrous materials, carburized or carbonitrided -Determination and verification of case hardening depth by a micro hardness test |
KS D ISO 4518-2012 | 金属覆盖层.厚度测量.轮廓仪法 | Metallic coatings－Measurement of coating thickness－Profilometric method |
KS D ISO 4519-2009 | 电沉积金属覆盖层和有关精饰计数抽样检查程序 | Electrodeposited metallic coatings and related finishes－Sampling procedures for inspection by attributes |
KS D ISO 4531-1-2015 | 搪瓷与食品接触搪瓷制品铅、镉的析出第1部分：试验方法 | Vitreous and porcelain enamels－Release of lead and cadmium from enamelled ware in contact with food－Part 1：Method of test |
KS D ISO 4531-2-2015 | 搪瓷与食品接触搪瓷制品铅、镉的释放第2部分：允许限值 | Vitreous and porcelain enamels－Release of lead and cadmium from enamelled ware in contact with food－Part 2：Permissible limits |
KS D ISO 4551-2008 | 铁合金取样和筛析 | Ferroalloys－Sampling and sieve analysis |
KS D ISO 4552-1-2003 | 铁合金化学分析用取样和样品制备第1部分：铬铁、硅铬合金、硅铁、硅锰合金、锰铁 | Ferroalloys－Sampling and sample preparation for chemical analysis－Part 1：Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese |
KS D ISO 4552-2-2003 | 铁合金化学分析取样和试样制备第2部分：钛铁、钼铁、钨铁、铌铁、钒铁 | Ferroalloys－Sampling and sample preparation for chemical analysis－Part 2：Ferrotitanium, ferromolybdenum,ferrotungsten, ferroniobium, ferrovanadium |
KS D ISO 4740-2003 | 铜和铜合金.锌含量的测定.火焰原子吸收光谱法 | Copper and copper alloys－Determination of zinc content－Flame atomic absorption spectrometric method |
KS D ISO 4741-2002 | 铜和铜合金.磷含量的测定.钼钒酸盐光谱法 | Copper and copper alloys－Determination of phosphorus content－Molybdovanadate spectrometric method |
KS D ISO 4742-2003 | 铜合金.镍含量的测定.重量法 | Copper alloys－Determination of nickel content－Gravimetric method |
KS D ISO 4744-2002 | 铜和铜合金.铬含量的测定.火焰原子吸收光谱法 | Copper and copper alloys－Determination of chromium content－Flame atomic absorption spectrometric method |
KS D ISO 4748-2002 | 铜合金.铁含量的测定.Na2EDTA滴定法 | Copper alloys－Determination of iron content－Na2EDTA titrimetric method |
KS D ISO 4749-2002 | 铜合金.铅含量的测定.火焰原子吸收光谱法 | Determination of lead content in copper alloys by flame atomic absorption spectrometric method |
KS D ISO 4751-2002 | 铜和铜合金.锡含量的测定.光谱法 | Copper and copper alloys－Determination of tin content－ Spectrometric method |
KS D ISO 4829-1-2002 | 钢和铸铁总硅含量的测定还原硅钼酸盐分光光度法第1部分：硅含量在0.05%-1.0%之间 | Steel and cast iron－Determination of total silicon content－Reduced molybdosilicate spectrophotometric method－Part 1：Silicon contents between 0.05 and 1.0 % |
KS D ISO 4829-2-2005 | 钢铁总硅含量的测定还原硅钼酸盐分光光度法第2部分：硅含量在0.01%-0.05%之间 | Steel and iron－Determination of total silicon content－Reduced molybdosilicate spectrophotometric method－Part 2：Silicon contents between 0.01 and 0.05 % |
KS D ISO 4883-2003 | 硬质合金.用X射线荧光测定金属元素的含量.溶液法 | Hardmetals－Determination of contents of metallic elements by X－ray fluorescence－Solution method |
KS D ISO 4934-2002 | 钢和铁.硫含量的测定.重量分析法 | Steel and cast iron－Determination of total sulphur content－Gravimetric method |
KS D ISO 4935-2002 | 钢和铁.硫含量的测定.感应炉内燃烧红外线吸收法 | Steel and iron－Determination of total sulphur content－Infrared absorption method after combustion in an induction furnace |
KS D ISO 4937-2002 | 钢和铁.铬含量的测定.电位或视觉滴定法 | Steel and iron－Determination of chromium content－Potentiometric or visual titration method |
KS D ISO 4938-2002 | 钢和铁.镍含量的测定.重量法或容量法 | Steel and iron－Determination of nickel content－Gravimetric or titrimetric method |
KS D ISO 4939-2002 | 钢和铸铁.镍含量的测定.丁二酮肟分光光度法 | Steel and cast iron－Determination of nickel content－Dimethylglyoxime spectrophotometric method |
KS D ISO 4940-2002 | 钢和铸铁.镍含量的测定.火焰原子吸收光谱法 | Steel and cast iron－Determination of nickel content－Flame atomic absorption spectrometric method |
KS D ISO 4941-2002 | 钢和铁.钼含量的测定.分光光度法 | Steel and iron－Determination of molybdenum content－Thiocyanate spectrophotometric method |
KS D ISO 4942-2002 | 钢和铁.钒含量的测定.N-BPHA分光光度法 | Steel and iron－Determination of vanadium content－N-BPHA spectrophotometric method |
KS D ISO 4943-2002 | 钢和铸铁.铜含量的测定.火焰原子吸收光谱法 | Steel and cast iron－Determination of copper content－Flame atomic absorption spectrometric method |
KS D ISO 4945-2002 | 钢.氮含量的测定.分光光度法 | Steel－Determination of nitrogen content－Spectrophotometric method |
KS D ISO 4946-2002 | 钢和铸铁.铜含量的测定.2,2'-联喹啉分光光度法 | Steel and cast iron－Determination of copper content－2.2'-Diquinolyl spectrophotometric method |
KS D ISO 4947-2002 | 钢和铸铁.钒含量的测定.电位滴定法 | Steel and cast iron－Determination of vanadium content－Potentiometric titration method |
KS D ISO 4951-3-2003 | 高屈服强度钢棒和型钢第3部分：热机械轧制钢的交货条件 | High yield strength steel bars and sections－Part 3：Delivery conditions for thermomechanically－rolled steels |
KS D ISO 4960-2004 | 碳含量大于0.25%的冷轧碳素钢带 | Cold-reduced carbon steel strip with a carbon content over 0.25 % |
KS D ISO 4986-2002 | 铸钢件.磁粉检验 | Steel castings－Magnetic particle inspection |
KS D ISO 4987-2002 | 铸钢件.渗透检验 | Steel castings－Penetrant inspection |
KS D ISO 4991-2004 | 压力用途的铸钢件 | Steel castings for pressure purposes |
KS D ISO 4992-1-2007 | 铸钢件超声波检验第1部分：通用铸钢件 | Steel castings－Ultrasonic examination－Part 1：Steel castings for general purposes |
KS D ISO 4992-2-2007 | 铸钢件超声波检验第2部分：高应力构件用铸钢件 | Steel castings－Ultrasonic examination－Part 2：Steel castings for highly stressed components |
KS D ISO 4993-2003 | 铸钢件.射线照相检验 | Steel castings－Radiographic inspection |
KS D ISO 4999-2004 | 商品级和冲压和结构级连续热镀锡(合金)冷轧碳素薄钢板 | Continuous hot-dip terne(lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
KS D ISO 5182-2010 | 焊接.电阻焊电极和辅助设备材料 | Resistance welding－Materials for electrodes and ancillary equipment |
KS D ISO 5187-2008 | 焊接及相关工艺软钎料和钎料组合件机械试验方法 | Welding and allied processes－Assemblies made with soft solders and brazing filler metals－Mechanical test methods |
KS D ISO 5193-2004 | 加工铝和铝合金.拉制圆棒材.尺寸和形位(直径采用对称正负偏差)偏差 | Wrought aluminium and aluminium alloys－Drawn round bars－Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter) |
KS D ISO 5194-2001 | 铝合金化学分析方法火焰原子吸收光谱法测定锌量 | Aluminium alloys－Determination of zinc－Flame atomic absorption spectrometric method |
KS D ISO 5196-1-2005 | 镁合金钍的测定第1部分：重量法 | Magnesium alloys－Determination of thorium－Part 1：Gravimetric method |
KS D ISO 5196-2-2010 | 镁合金钍的测定第2部分：滴定法 | Magnesium alloys－Determination of thorium－Part 2：Titrimetric method |
KS D ISO 5445-2003 | 硅铁合金.规范和交货条件 | Ferrosilicon－Specification and conditions of delivery |
KS D ISO 5446-2003 | 锰铁.规范和交货条件 | Ferromanganese－Specification and conditions of delivery |
KS D ISO 5447-2003 | 硅锰铁.规范和交货条件 | Ferrosilicomanganese－Specification and conditions of delivery |
KS D ISO 5448-2003 | 铬铁.规范和交货条件 | Ferrochromium－Specification and conditions of delivery |
KS D ISO 5449-2003 | 硅铬铁.规范和交货条件 | Ferrosilicochromium－Specification and conditions of delivery |
KS D ISO 5450-2003 | 钨铁.规范和交货条件 | Ferrotungsten－Specification and conditions of delivery |
KS D ISO 5451-2003 | 钒铁.规范和交货条件 | Ferrovanadium－Specification and conditions of delivery |
KS D ISO 5452-2003 | 钼铁.规范和交货条件 | Ferromolybdenum－Specification and conditions of delivery |
KS D ISO 5453-2003 | 铌铁.规范和交货条件 | Ferroniobium－Specification and conditions of delivery |
KS D ISO 5454-2003 | 钛铁.规范和交货条件 | Ferrotitanium－Specification and conditions of delivery |
KS D ISO 5948-2002 | 铁路车辆材料.超声波验收检验 | Railway rolling stock material－Ultrasonic acceptance testing |
KS D ISO 5950-2004 | 商品级和冲压级连续电镀锡冷轧碳素薄钢板 | Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
KS D ISO 5956-2008 | 铜及铜合金化学分析方法罗丹明B分光光度法测定锑量 | Copper and copper alloys－Determination of antimony content－Rhodamine B spectrometric method |
KS D ISO 5959-2001 | 铜及铜合金化学分析方法二乙基二硫代氨基甲酸盐分光光度法测定铋量 | Copper and copper alloys－determination of bismuth content －Diethyldithiocarbamate spectrometric method |
KS D ISO 5960-2012 | 铜合金.镉含量的测定.火焰原子吸收光谱法 | Copper alloys－Determination of cadmium content－Flame atomic absorption spectrometric method |
KS D ISO 629-2008 | 钢铁及铸铁锰含量的测定分光光度法 | Steel and cast iron－Determination of manganese content－Spectrophotometric method |
KS D ISO 6317-2004 | 商品级和冲压级热轧碳素钢带 | Hot-rolled carbon steel strip of commercial and drawing qualities |
KS D ISO 6351-2012 | 镍.银、铋、镉、钴、铜、铁、锰、铅和锌含量的测定.火焰原子吸收光谱测定法 | Nickel－Determination of silver, bismuth, cadmium, cobalt, copper,iron, manganese, lead and zinc contents－Flame atomic absorption spectrometric method |
KS D ISO 6352-2012 | 镍铁.镍含量的测定.丁二酮肟重量分析法 | Ferronickel－Determination of Nickel content－Dimethylglyoxime gravimetric method |
KS D ISO 6362-1-2004 | 锻铝及铝合金挤压棒/棒、管和型材第1部分：检验和交货技术条件 | Wrought aluminium and aluminium alloys extruded rods/bars, tubes and profiles－Part 1：Technical conditions for inspection and delivery |
KS D ISO 6363-1-2004 | 变形铝及铝合金冷拉棒、棒、管第1部分：检验和交货技术条件 | Wrought aluminium and aluminium alloy cold－drawn rods/bars and tubes－Part 1：Technical conditions for inspection and delivery |
KS D ISO 6363-4-2004 | 变形铝及铝合金冷拉棒、棒、管第4部分：拉制矩形棒形状和尺寸公差 | Wrought aluminium and aluminium alloy cold－drawn rods/bars and tubes－Part 4：Drawn rectangular bars－Tolerances on form and dimensions |
KS D ISO 6363-5-2004 | 变形铝及铝合金冷拉棒、棒、管第5部分：拉制方形和六角形棒形状和尺寸公差 | Wrought aluminium and aluminium alloy cold－drawn rods/bars and tubes－Part 5：Drawn square and hexagonal bars－Tolerances on form and dimensions |
KS D ISO 6437-2001 | 铜合金化学分析方法滴定法测定铬量 | Copper alloys－Determination of chromium content －Titrimetric method |
KS D ISO 6509-2016 | 金属与合金的腐蚀.黄铜耐脱锌性的测定 | Corrosion of metals and alloys－Determination of dezincification resistance of brass |
KS D ISO 671-2002 | 钢和铸铁中硫含量的测定.燃烧滴定法 | Steel and cast iron－Determination of sulphur content－Combustion titrimetric method |
KS D ISO 6827-2001 | 铝及铝合金钛含量的测定二安替比林甲烷光度法 | Aluminium and aluminium alloys－Determination of titanium content －Diantipyrylmethane photometric method |
KS D ISO 6929-2004 | 钢制品.定义和分类 | Steel products Definitions and classification |
KS D ISO 6932-2004 | 最高含碳量为0.25%的冷轧碳素钢带 | Cold-reduced carbon steel strip with a maximum carbon content of 0.25 % |
KS D ISO 6933-2002 | 铁路车辆材料.磁粉验收检验 | Railway rolling stock material－Magnetic particle acceptance testing |
KS D ISO 6957-2002 | 铜合金.抗应力腐蚀氨熏试验 | Copper alloys－Ammonia test for stress corrosion resistance |
KS D ISO 7087-2003 | 铁合金.评估质量偏差的实验方法和检验取样精度的方法 | Ferroalloys－Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling |
KS D ISO 714-2002 | 锌.铁含量的测定.光度法 | Zinc－Determination of iron content－Photometric method |
KS D ISO 7242-2006 | 轻金属和铝合金的化学分析.实验室间的试验结果的统计分析 | Chemical analysis of light metals and their alloys－Statistical interpretation of inter-laboratory trials |
KS D ISO 7266-2002 | 铜和铜合金.硫含量的测定.燃烧滴定法 | Copper and copper alloys－Determination of sulfur content－Combustion titrimetric method |
KS D ISO 7274-2004 | 加工铝和铝合金.冷拉圆棒材.尺寸和形状公差(直径采用负公差) | Wrought aluminium and aluminium alloys－Drawn round bars－Tolerances on shape and dimensions(All minus tolerances on diameter) |
KS D ISO 7347-2003 | 铁合金.检验取样和样品制备偏差的试验方法 | Ferroalloys－Experimental methods for checking the bias of sampling and sample preparation |
KS D ISO 7373-2003 | 铁合金.检验样品缩分精度的试验方法 | Ferroalloys－Experimental methods for checking the precision of sample division |
KS D ISO 7384-2015 | 人工环境下的腐蚀试验.一般要求 | Corrosion tests in artificial atmosphere－General requirements |
KS D ISO 7441-2003 | 金属与合金的腐蚀.户外暴露腐蚀试验中双金属腐蚀的测定 | Corrosion of metals and alloys－Determination of bimetallic corrosion in outdoor exposure corrosion tests |
KS D ISO 7520-2012 | 镍铁.钴含量的测定.火焰原子吸收光谱测定法 | Ferronickel－Determination of cobalt content－Flame atomic absorption spectrometric method |
KS D ISO 7523-2012 | 镍.银、砷、铋、镉、铅、锑、硒、锡和铊含量的测定.电热原子吸收光谱测定法 | Nickel－Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents－Electrothermal atomic absorption spectrometric method |
KS D ISO 7524-2012 | 镍、镍铁和镍合金.碳含量的测定.感应电炉燃烧后红外线吸收法 | Nickel, ferronickel and nickel alloys－Determination of carbon content－Infra-red absorption method after induction furnace combustion |
KS D ISO 7525-2012 | 镍.硫含量的测定.生成硫化氢后甲基蓝分子吸收光谱测定法 | Nickel－Determination of sulfur content－Methylene blue molecular absorption spectrometric method after generation of hydrogen sulfide |
KS D ISO 7526-2012 | 镍、镍铁和镍合金.硫含量的测定.感应电炉燃烧后红外线吸收法 | Nickel, ferronickel and nickel alloys－Determination of sulfur content－Infra-red absorption method after induction furnace combustion |
KS D ISO 7527-2012 | 镍、镍铁和镍合金.硫含量的测定.感应电炉燃烧后碘量滴定法 | Nickel, ferronickel and nickel alloys－Determination of sulfur content－Iodimetric titration method after induction furnace combustion |
KS D ISO 7528-2012 | 镍合金.铁含量的测定.重铬酸钾滴定法 | Nickel alloys－Determination of iron content－Titrimetric method with potassium dichromate |
KS D ISO 7529-2012 | 镍合金.铬含量的测定.硫酸铁(II)铵电位滴定法 | Nickel alloys－Determination of chromium content－Potentiometric titration method with ammonium iron(II) sulfate |
KS D ISO 7530-1-2012 | 镍合金火焰原子吸收光谱法第1部分：一般要求和样品溶解 | Nickel alloys－Flame atomic absorption spectrometric analysis－Part 1：General requirements and sample dissolution |
KS D ISO 7530-2-2012 | 镍合金火焰原子吸收光谱法第2部分：钴含量的测定 | Nickel alloys－Flame atomic absorption spectrometric analysis－Part 2：Determination of cobalt content |
KS D ISO 7530-3-2012 | 镍合金火焰原子吸收光谱法第3部分：铬含量的测定 | Nickel alloys－Flame atomic absorption spectrometric analysis－Part 3：Determination of chromium content |
KS D ISO 7530-4-2012 | 镍合金火焰原子吸收光谱法第4部分：铜含量的测定 | Nickel alloys－Flame atomic absorption spectrometric analysis－Part 4：Determination of copper content |
KS D ISO 7530-5-2012 | 镍合金火焰原子吸收光谱法第5部分：铁含量的测定 | Nickel alloys－Flame atomic absorption spectrometric analysis－Part 5：Determination of iron content |
KS D ISO 7530-6-2012 | 镍合金火焰原子吸收光谱法第6部分：锰含量的测定 | Nickel alloys－Flame atomic absorption spectrometric analysis－Part 6：Determination of manganese content |
KS D ISO 7530-7-2012 | 镍合金火焰原子吸收光谱法第7部分：铝含量的测定 | Nickel alloys－Flame atomic absorption spectrometric analysis－Part 7：Determination of aluminium content |
KS D ISO 7530-8-2012 | 镍合金火焰原子吸收光谱法第8部分：硅含量的测定 | Nickel alloys－Flame atomic absorption spectrometric analysis－Part 8：Determination of silicon content |
KS D ISO 7530-9-2012 | 镍合金火焰原子吸收光谱法第9部分：钒含量的测定 | Nickel alloys－Flame atomic absorption spectrometric analysis－Part 9：Determination of vanadium content |
KS D ISO 7539-1-2015 | 金属和合金的腐蚀应力腐蚀试验第1部分：试验程序的通用指南 | Corrosion of metals and alloys－Stress corrosion testing－ Part 1：General guidance on testing procedure |
KS D ISO 7539-2-2016 | 金属和合金的腐蚀应力腐蚀试验第2部分：弯曲梁试样的制备和使用 | Corrosion of metals and alloys－Stress corrosion testing－Part 2：Preparation and use of bent-beam specimens |
KS D ISO 7539-3-2018 | 金属和合金的腐蚀.应力腐蚀试验.第3部分：U形弯曲试样的制备和使用 | Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens |
KS D ISO 7539-4-2018 | 金属和合金的腐蚀应力腐蚀试验第4部分：单轴加载拉伸试样的制备和使用 | Corrosion of metals and alloys－Stress corrosion testing－Part 4：Preparation and use of uniaxially loaded tension specimens |
KS D ISO 7539-5-2009 | 金属和合金的腐蚀应力腐蚀试验第5部分：C形环试样的制备和使用 | Corrosion of metals and alloys－Stress corrosion testing－ Part 5：Preparation and use of C-ring specimens |
KS D ISO 7539-6-2009 | 金属和合金的腐蚀应力腐蚀试验第6部分：预裂试样的制备和使用 | Corrosion of metals and alloys－Stress corrosion testing－Part 6：Preparation and use of pre-cracked specimens |
KS D ISO 7539-7-2015 | 金属和合金的腐蚀.应力腐蚀试验- | Corrosion of metals and alloys — Stress corrosion testing — |
KS D ISO 7539-8-2015 | 金属和合金的腐蚀.应力腐蚀试验- | Corrosion of metals and alloys — Stress corrosion testing — |
KS D ISO 7539-9-2017 | 金属和合金的腐蚀.应力腐蚀试验.第9部分：在上升荷载或上升位移下试验用预裂试样的制备和使用 | Corrosion of metals and alloys - Stress corrosion testing - Part 9 : Preparation and use pre-cracked specimens for tests under rising load or rising displacement |
KS D ISO 7625-2016 | 烧结金属材料（不包括硬质合金）－测定碳含量用化学分析样品的制备 | Sintered metal materials, excluding hardmetals－Preparation of samples for chemical analysis for determination of carbon content |
KS D ISO 7627-1-2012 | 硬质合金火焰原子吸收光谱法化学分析第1部分：一般要求 | Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 1：General requirements |
KS D ISO 7627-2-2012 | 硬质合金化学分析方法火焰原子吸收光谱法第2部分：含量为0.001%-0.02%（质量分数）的钙、钾、镁和钠的测定 | Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 2：Determination of calcium, potassium, magnesium and sodium in contents from 0.001 % to 0.02 % (mass fraction) |
KS D ISO 7627-3-2012 | 硬质合金化学分析方法火焰原子吸收光谱法第3部分：含量为0.01%-0.5%（质量分数）的钴、铁、锰和镍的测定 | Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 3：Determination of cobalt, iron, manganese and nickel in contents from 0.01 to 0.5 % (mass fraction) |
KS D ISO 7627-4-2012 | 硬质合金化学分析方法火焰原子吸收光谱法第4部分：含量为0.01%-0.5%（质量分数）的钼、钛和钒的测定 | Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 4：Determination of molybdenum, titanium and vanadium in contents from 0.01 to 0.5 % (mass fraction) |
KS D ISO 7627-5-2012 | 硬质合金化学分析方法火焰原子吸收光谱法第5部分：含量为0.5%-2%（质量分数）的钴、铁、锰、钼、镍、钛和钒的测定 | Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 5：Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0.5 to 2 % (mass fraction) |
KS D ISO 7627-6-2012 | 硬质合金化学分析方法火焰原子吸收光谱法第6部分：含量为0.01%-2%（质量分数）的铬的测定 | Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 6：Determination of chromium in contents from 0.01 to 2 % (mass fraction) |
KS D ISO 7668-2012 | 铝及铝合金阳极氧化20°、45°、60°或85°角阳极氧化膜镜面反射和镜面光泽的测定 | Anodizing of aluminium and its alloys－Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° |
KS D ISO 7692-2002 | 钛铁.钛含量的测定.滴定法 | Ferrotitanium－Determination of titanium content－Titrimetric method |
KS D ISO 7693-2002 | 钨铁.钨含量的测定.喹啉(Cinchonine)重量法 | Ferrotungsten－Determination of tungsten content－Cinchonine gravimetric method |
KS D ISO 791-2002 | 镁合金.铝含量的测定.8-羟基喹啉重量法 | Magnesium alloys－Determination of aluminium－8－hydroxyquinoline gravimetric method |
KS D ISO 792-2002 | 镁和镁合金.铁含量的测定.邻菲啰啉光度法 | Magnesium and magnesium alloys－Determination of iron -Orthophenanthroline photometric method |
KS D ISO 793-2002 | 铝和铝合金.铁含量的测定.邻菲啰啉光度法 | Aluminium and aluminium alloys－Determination of iron－Orthophenanthroline photometric method |
KS D ISO 794-2002 | 镁和镁合金.铜含量的测定.草酰二酰肼光度法 | Magnesium and magnesium alloys－Determination of copper content－Oxalyldihydrazide photometric method |
KS D ISO 795-2012 | 铝和铝合金.铜含量的测定.草酰二酰肼光度法 | Aluminium and aluminium alloys－Determination of copper content －Oxalyldihydrazide photometric method |
KS D ISO 796-2012 | 铝合金.铜含量的测定.电解法 | Aluminium alloys－Determination of copper－Electrolytic method |
KS D ISO 797-2002 | 铝及铝合金化学分析方法重量法测定硅量 | Aluminium and aluminium alloys－Determination of silicon－Gravimetric method |
KS D ISO 8044-2003 | 金属与合金的腐蚀.基本术语和定义 | Corrosion of metals and alloys－Basic terms and definitions |
KS D ISO 8049-2003 | 镍铁丸.分析取样 | Ferronickel shot－Sampling for analysis |
KS D ISO 8050-2003 | 镍铁合金锭或块.分析取样 | Ferronickel ingots or pieces－Sampling for analysis |
KS D ISO 808-2002 | 铝和铝合金.硅含量的测定.钼蓝分光光度法 | Aluminium and aluminium alloys－Determination of silicon－Spectrophotometric method with the reduced silicomolybdic complex |
KS D ISO 809-2001 | 镁及镁合金锰的测定高碘酸盐光度法（锰含量在0.01～0.8%之间） | Magnesium and magnesium alloys－Determination of manganese－Periodate photometric method(manganese content between 0.01 and 0.8 %) |
KS D ISO 810-2001 | 镁及镁合金锰的测定高碘酸盐光度法（锰含量小于0.01%） | Magnesium and magnesium alloys－Determination of manganese－Periodate photometric method(Manganese content less than 0.01 %) |
KS D ISO 8125-2007 | 铝及铝合金阳极氧化着色阳极氧化膜颜色和色差的测定 | Anodizing of aluminium and its alloys－Determination of colour and colour difference of coloured anodic coatings |
KS D ISO 8343-2012 | 镍铁中硅含量的测定.重量法 | Ferronickel－Determination of silicon content－Gravimetric method |
KS D ISO 8401-2015 | 金属覆盖层.延展性的测量方法述评 | Metallic coatings－Review of methods of measurement of ductility |
KS D ISO 8407-2014 | 金属与合金的腐蚀.腐蚀试样中腐蚀生成物的清除 | Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens |
KS D ISO 8565-2003 | 金属及合金大气腐蚀试验现场试验通用要求 | Metals and alloys－Atmospheric corrosion testing－General requirements for field tests |
KS D ISO 8653-2003 | 首饰戒指尺寸定义、测量和命名 | Jewellery－Ring-sizes－Definition, measurement and designation |
KS D ISO 8654-2003 | 金合金颜色定义、颜色范围和命名 | Colours of gold alloys－Definition, range of colours and designation |
KS D ISO 886-2002 | 铝和铝合金中锰含量的测定.光度法(锰含量为0.005～1.5%) | Aluminum and aluminum alloys－Determination of manganese－Photometric method(Manganese content between 0.005 and 1.5%) |
KS D ISO 8993-2012 | 铝及铝合金阳极氧化点蚀评定体系图法 | Anodizing of aluminium and its alloys－Rating system for the evaluation of pitting corrosion－Chart method |
KS D ISO 8994-2002 | 阳极氧化铝和铝合金.点腐蚀法评定铝及铝合金阳极氧化膜.网格法 | Anodized aluminium and aluminium alloys－Rating system for the evaluation of pitting corrosion－Grid method |
KS D ISO 9202-2011 | 首饰.贵金属合金纯度 | Jewellery－Fineness of precious metal alloys |
KS D ISO 9220-2009 | 金属覆盖层覆盖层厚度测量扫描电子显微镜法 | Metallic coatings－Measurement of coating thickness－Scanning electron microscope method |
KS D ISO 9223-2015 | 金属和合金的腐蚀大气腐蚀性分类 | Corrosion of metals and alloys－Corrosivity of atmospheres－Classification |
KS D ISO 9224-2015 | 金属与合金的腐蚀.大气腐蚀性.腐蚀等级的指导值 | Corrosion of metals and alloys－Corrosivity of atmospheres－Guiding values for the corrosivity categories |
KS D ISO 9225-2003 | 金属与合金的腐蚀.大气腐蚀性.污染测量 | Corrosion of metals and alloys－Corrosivity of atmospheres－Measurement of pollution |
KS D ISO 9226-2018 | 金属与合金的腐蚀.大气腐蚀性.评估腐蚀性用对标准样品的腐蚀率的测定 | Corrosion of metals and alloys－Corrosivity of atmospheres－Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
KS D ISO 9302-2002 | 承压无缝和焊接（埋弧焊接除外）钢管液压密封性检验的电磁试验 | Seamless and welded(except submerged arc-welded) steel tubes for pressure purposes－Electromagnetic testing for verification of hydraulic leak-tightness |
KS D ISO 9303-2002 | 压力用途的无缝钢管和焊接(埋弧焊除外)钢管.检测纵向缺陷用全周边超声波试验 | Seamless and welded(except submerged arc-welded) steel tubes for pressure purposes－Full peripheral ultrasonic testing for the detection of longitudinal imperfections |
KS D ISO 9304-2002 | 压力用途的无缝钢管和焊接(埋弧焊除外)钢管.检测缺陷用涡流电流试验 | Seamless and welded(except submerged arc－welded) steel tubes for pressure purposes－Eddy current testing for the detection of imperfections |
KS D ISO 9305-2002 | 压力用途的无缝钢管.横向缺陷全周边超声电流检验 | Seamless steel tubes for pressure purposes－Full peripheral ultrasonic testing for the detection of transverse imperfections |
KS D ISO 9364-2004 | 商用、拉伸和结构质量的连续热浸镀铝/锌钢板 | Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities |
KS D ISO 9388-2012 | 镍合金磷含量的测定钼蓝分子吸收光谱法 | Nickel alloys－Determination of phosphorus content－Molybdenum blue molecular absorption spectrometric method |
KS D ISO 9400-2013 | 镍基合金.抗晶间腐蚀的测定 | Nickel-based alloys — Determination of resistance to intergranular corrosion |
KS D ISO 9441-2002 | 钢铌含量的测定PAR分光光度法 | Steel－Determination of niobium content－PAR spectrophotometric method |
KS D ISO 9444-2004 | 热轧不锈钢宽钢带和薄钢板尺寸和形状公差 | Hot-rolled stainless steel wide strip and sheet－Tolerances on dimensions and form |
KS D ISO 9445-2004 | 冷轧不锈钢宽钢带和薄钢板尺寸和形状公差 | Cold-rolled stainless steel wide strip and sheet－Tolerances on dimensions and form |
KS D ISO 9453-2015 | 软钎料合金化学成分和形状 | Soft solder alloys－Chemical compositions and forms |
KS D ISO 946-2003 | 灰铸铁梁无缺口冲击试验 | Grey cast iron - Beam unnotched impact test |
KS D ISO 9556-2001 | 钢铁总碳含量的测定感应炉燃烧红外吸收法 | Steel and iron-Determination of total carbon content-Infrared absorption method after combustion in an induction furnace |
KS D ISO 9587-2012 | 金属和其他无机覆盖层.钢铁为减少氢脆危险的预处理 | Metallic and other inorganic coatings－Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
KS D ISO 9588-2012 | 金属和其他无机覆盖层.钢铁为减少氢脆危险的后涂覆处理 | Metallic and other inorganic coatings－Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
KS D ISO 9591-2014 | 铝合金的腐蚀.抗应力腐蚀裂纹的测定 | Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking |
KS D ISO 9598-2002 | 压力用途的无缝钢管.检测横向缺陷用铁磁钢管全周边磁转换/磁链试验 | Seamless steel tubes for pressure purposes－Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections |
KS D ISO 9647-2002 | 钢和铁中钒含量的测定.火焰原子吸收光谱法 | Steel and iron-Determination of vanadium content — Flame atomic absorption spectrometric method |
KS D ISO 9658-2002 | 钢中铝含量的测定.火焰原子吸收光谱法 | Steel－Determination of aluminium content－Flame atomic absorption spectrometric method |
KS D ISO 9915-2007 | 铝合金铸件射线照相检验 | Aluminium alloy castings－Radiography testing |
KS D ISO ASTM 52900-2017 | 添加剂制造-一般原则-术语 | Additive manufacturing – General Principles – Terminology |
KS D ISO TR 10194-2004 | 非圆形通用轻型金属容器公称充装量和公称截面 | Non－round general use light gauge metal containers－Nominal filling volumes and nominal cross－sections |
KS D ISO TR 11434-2001 | 镍合金化学分析方法离子交换法测定镍合金中铌、钽 | Nickel alloys－Determination of niobium and tantalum in nickel alloys－Ion exchange method |
KS D ISO TR 11761-2004 | 薄壁金属容器圆开口罐罐罐型尺寸分类 | Light－gauge metal containers－Round open－top cans－Classification of can sizes by construction type |
KS D ISO TR 11762-2004 | 轻型金属容器加气液体产品用开口圆罐按结构型式对罐尺寸的分类 | Light－gauge metal containers－Round open－top cans for liquid products with added gas－Classification of can sizes by construction type |
KS D ISO TR 11776-2004 | 轻型金属容器－非圆形开口罐－按其额定容量定义的罐 | Light gauge metal containers－Non－round open－top cans－Cans defined by their nominal capacities |
KS D ISO TR 15461-2005 | 钢制锻件.机械试验用试验频率、抽样条件和试验方法 | Steel forgings－Testing frequency, sampling conditions and test methods for mechanical tests |
KS D ISO TR 15969-2011 | 表面化学分析－深度剖面－溅射深度的测量 | Surface chemical analysis－Depth profiling－Measurement of sputtered depth |
KS D ISO TR 7596-2003 | 钢丝绳套接规程树脂套接 | Socketing procedures for wire ropes－Resin socketing |
KS D ISO TR 7955-2008 | 铌铁铌含量的测定重量法 | Ferroniobium－Determination of niobium content－Gravimetric method |
KS D ISO TR 9721-2004 | 镍及镍合金化学符号材料描述规则 | Nickel and nickel alloys－Rules for material description based on chemical symbols |
KS D ISO TS 15510-2005 | 不锈钢.化学成分 | Stainless steels－Chemical composition |
