KS C IEC 60454-3-2018

电工用压敏粘带第3部分：单项材料规范活页14:涂压敏粘合剂的聚四氟乙烯薄膜带

Pressure-sensitive adhesive tapes for   electrical purposes —   Part 3: Specifications for individual materials —   Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive

KS C IEC 60454-3-2018

电工用压敏粘带第3部分：单项材料规范活页19:双面涂压敏胶的各种背衬材料制成的带

Pressure-sensitive adhesive tapes for   electrical purposes —   Part 3: Specifications for individual materials —   Sheet 19: Tapes made from various backing materials with pressure-sensitive   adhesive on both sides

KS C IEC 60454-3-2017

电工用压敏粘带第3部分：单项材料规范活页2:涂橡胶热固胶、橡胶热塑性胶或丙烯酸交联胶的聚酯薄膜带的要求

Pressure-sensitive adhesive tapes for   electrical purposes —   Part 3: Specifications for individual materials —   Sheet 2: Requirements for polyester film tapes with rubber thermosetting,   rubber thermoplastic or acrylic crosslinked adhesives

KS C IEC 60454-3-2018

电工用压敏粘带第3部分：单项材料规范活页4:涂橡胶热固胶的皱纹和非皱纹纤维素纸

Pressure-sensitive adhesive tapes for   electrical purposes —   Part 3: Specifications for individual materials —   Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting   adhesive

KS C IEC 60454-3-2018

电工用压敏粘带第3部分：单项材料规范活页7:压敏粘聚酰亚胺薄膜带

Pressure-sensitive adhesive tapes for   electrical purposes —   Part 3: Specifications for individual materials —   Sheet 7: Polyimide film tapes with pressure-sensitive adhesive

KS C IEC 60454-3-2018

电工用压敏粘带第3部分：单项材料规范活页8:玻璃基、醋酸纤维素或粘胶纤维复合压敏粘带织物带

Pressure-sensitive adhesive tapes for   electrical purposes —   Part 3: Specifications for individual materials —   Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass,   cellulose acetate alone or combined with viscose fibre

KS C IEC 60455-1-2003

电气绝缘用树脂基活性化合物第1部分：定义和一般要求

Resin based reactive compounds used for   electrical insulation－Part   1：Definitions and general requirements

KS C IEC 60455-2-2015

电气绝缘用树脂基活性化合物第2部分：试验方法

Resin based reactive compounds used for   electrical insulation－Part   2：Methods of test

KS C IEC 60455-2-2015

电气绝缘用无溶剂可聚合树脂化合物规范第2部分：试验方法电气用涂粉试验方法

Specification for solventless polymerisable   resinous compounds used for electrical insulation－Part 2：Methods   of test－Test methods for coating powders for   electrical purpose

KS C IEC 60455-3-2003

电气绝缘用无溶剂可聚合树脂化合物规范第3部分：单项材料规范活页11:环氧树脂基粉末涂料

Specification for solventless polymerisable   resinous compounds used for electrical insulation－Part 3：Specifications   for individual materials－Sheet 11：Epoxy resin－based coating powders

KS C IEC 60455-3-2003

电气绝缘用树脂基活性化合物第3部分：单项材料规范活页1:未填充环氧树脂化合物

Resin based reactive compounds used for   electrical insulation－Part   3：Specifications for individual materials－Sheet 1：Unfilled epoxy resinous compounds

KS C IEC 60455-3-2015

电气绝缘用树脂基活性化合物第3部分：单项材料规范活页2:石英填充环氧树脂化合物

Resin based reactive compounds used for   electrical insulation－Part   3：Specifications for individual materials－Sheet 2：Quartz filled epoxy resinous   compounds

KS C IEC 60455-3-2003

电气绝缘用树脂基活性化合物第3部分：单项材料规范活页3:未填充聚氨酯化合物

Resin based reactive compounds used for   electrical insulation－Part   3：Specifications for individual materials－Sheet 3：Unfilled polyurethane compounds

KS C IEC 60455-3-2003

电气绝缘用树脂基活性化合物第3部分：单项材料规范活页4:填充聚氨酯化合物

Resin based reactive compounds used for   electrical insulation－Part   3：Specifications for individual materials－Sheet 4：Filled polyurethane compounds

KS C IEC 60455-3-2008

电气绝缘用树脂基活性化合物第3部分：单项材料规范活页5:不饱和聚酯基浸渍树脂

Resin based reactive compounds used for electrical   insulation－Part 3：Specifications for individual materials－Sheet   5：Unsaturated polyester based impregnating resins

KS C IEC 60456-2015

家用电动洗衣机.性能测量方法

Clothes washing machines for household use — Methods for measuring the   performance

KS C IEC 60457-5-2014

刚性精密同轴线及其相关的精密连接器 第5部分:50Ω、3.5mm刚性精密同轴线和连接器的安装规定

Rigid precision coaxial lines and their   associated precision connectors — Part 5: 50 ohms 3.5 mm rigid precision coaxial line with   provision for mounting connectors

KS C IEC 60464-1-2015

电气绝缘漆第1部分：定义和一般要求

Varnishes used for electrical insulation －Part 1：Definitions   and general requirements

KS C IEC 60464-2-2015

电气绝缘漆第2部分：试验方法

Varnishes used for electrical insulation－Part 2：Methods   of test

KS C IEC 60464-3-2015

电气绝缘漆第3部分：单项材料规范活页1:环境固化面漆

Varnishes used for electrical insulation－Part 3：Specifications   for individual materials－Sheet 1：Ambient curing finishing varnishes

KS C IEC 60464-3-2015

电气绝缘漆第3部分：单项材料规范活页2:热固化浸渍漆

Varnishes used for electrical insulation－Part 3：Specifications   for individual materials－Sheet 2：Hot curing impregnating varnishes

KS C IEC 60468-2003

金属材料电阻率测量方法

Method of measurement of resistivity of   metallic materials

KS C IEC 60469-1-2008

脉冲技术和装置.第1部分:脉冲术语和定义

Pulse techniques and apparatus－Part 1：Pulse   terms and definitions

KS C IEC 60469-2-2013

脉冲技术和装置.第2部分:脉冲测量和分析，总则

Pulse techniques and apparatus－Part 2：Pulse   measurement and analysis, general considerations

KS C IEC 60471-2003

绝缘子串单元槽型连接的尺寸

Dimensions of clevis and tongue couplings   of string insulator units

KS C IEC 60476-2009

核仪器.使用放射源的电测量系统和仪表.通用要求

Nuclear instrumentation－Electrical measuring systems and   instruments utilizing ionizing radiation sources－General   aspects

KS C IEC 60477-2-2013

实验室电阻器.第2部分:实验室用交流电阻器

Laboratory resistors－Part 2：Laboratory   a.c. resistors

KS C IEC 60477-2013

实验室电阻器.实验室用直流电阻器

Laboratory resistors－Laboratory d.c. resistors

KS C IEC 60479-1-2007

电流对人和家畜的影响.第1部分:通用样式

Effects of current on human beings and   livestock－Part 1：General aspects

KS C IEC 60479-2-2013

电流对人和家畜的影响.第2部分:特殊方面

Effects of current on human beings and   livestock－Part 2：Special aspects

KS C IEC 60479-3-2007

电流对人和家畜的影响.第3部分:家畜体内电流的影响

Effects of current on human beings and   livestock－Part 3：Effects of currents passing through the body of livestock

KS C IEC 60483-2016

高机电耦合压电陶瓷的动态测量指南

Guide to dynamic measurements of   piezoelectric ceramics with high electromechanical coupling

KS C IEC 60491-2003

摄影用电子闪光装置安全要求

Safety requirements for electronic flash   apparatus for photographic purposes

KS C IEC 60493-1-2002

老化试验数据的统计分析指南.第1部分:以正态分布试验结果平均值为基础的方法

Guide for the statistical analysis of   ageing test data－Part   1：Methods based on mean values of normally   distributed test results

KS C IEC 60494-1-2015

铁路设施机车车辆受电弓特性和试验第1部分：正线车辆受电弓

Railway applications — Rolling stock — Pantographs — Characteristics and tests — Part 1: Pantographs for main line vehicles

KS C IEC 60494-2-2015

铁路设施机车车辆受电弓特性和试验第2部分：地铁和轻轨车辆用受电弓

Railway applications — Rolling stock — Pantographs — Characteristics and tests — Part 2: Pantographs for metros and light rail vehicles

KS C IEC 60496-2002

家用和类似用途的电保温板性能测试方法

Methods for measuring the performance   ofelectric warming plates for household and similar

KS C IEC 60500-2014

IEC标准水听器

IEC standard hydrophone

KS C IEC 60502-1-2013

额定电压从1kV到30kV的挤压绝缘电力电缆及其附件.第1部分:电缆(1 kV与3 kV)

Power cables with extruded insulation and   their accessories for rated voltages from 1 kV (Um＝1.2 kV) up to 30 kV (Um＝36 kV)－Part 1：Cables   for rated voltages of 1 kV (Um＝1.2 kV) and 3 kV (Um＝3.6 kV)

KS C IEC 60502-2-2016

额定电压从1 kV(Um=1.2 kV)到30 kV(Um=36 kV)的挤压绝缘电力电缆及其附件.第2部分:额定电压从6   kV(Um=7.2 kV)到30 kV(Um=3.6 kV)的电缆

Power cables with extruded insulation and   their accessories for rated voltages from 1 kV(Um＝1.2 kV) up to 30 kV(Um＝36 kV) — Part 2: Cables for rated voltages   from 6 kV(Um＝7.2 kV) up to 30 kV(Um＝36 kV)

KS C IEC 60502-4-2014

额定电压从1 kV(Um=1.2 kV)到30 kV(Um=36 kV)的挤压绝缘电力电缆及其附件.第4部分:额定电压从6   kV(Um=7.2 kV)到30 kV(Um=3.6 kV)电缆附件的试验要求

Power cables with extruded insulation and   their accessories for rated voltages from 1 kV(Um＝1.2 kV) up to 30 kV(Um＝36 kV) — Part 4: Test requirements on   accessories for cables with ratedPart 4: Test requirements on accessories for   cables with rated voltages from 6 kV(Um＝7.2 kV) up to   30 kV(Um＝36 kV)

KS C IEC 60505-2008

电气绝缘系统的评定和鉴定

Evaluation and qualification of electrical   insulation systems

KS C IEC 60507-2018

交流系统用高压绝缘子的人工污秽试验

Artificial pollution tests on high-voltage   ceramic and glass insulators to be used on a.c. systems

KS C IEC 60508-2002

家用和类似用途的电熨烫机性能测试方法

Methods for measuring the performance of   electric ironingmachines for household and similar purpose

KS C IEC 60512-11-2014

电子设备连接器.试验和测量.第11-13部分：气候试验.试验11n:无焊包装连接的气密性

Connectors for electronic equipment — Tests and measurements — Part 11-13: Climatic tests — Test 11n:   Gas tightness, solderless wrapped connections

KS C IEC 60512-7-2014

电子设备用机电元件基本试验程序和测量方法第7部分：机械操作试验和密封试验

Electromechanical components for electronic   equipment — Basic testing   procedures and measuring methods — Part 7: Mechanical   operating tests and sealing tests

KS C IEC 60513-2002

医用电气设备安全标准的基本方面

Fundamental aspects of safety standardsfor   medical electrical equipment

KS C IEC 60515-2012

核反应堆测量仪表和防护用辐射探测器.特性和试验方法

Nuclear power plants－Instrumentation important to safety－ Radiation detectors－Characteristics and   test methods

KS C IEC 60519-1-2015

电热装置的安全第1部分：一般要求

Safety in electroheating installations — Part 1: General requirements

KS C IEC 60519-11-2012

电热装置的安全第11部分：利用电磁力对液态金属影响的装置的特殊要求

Safety in electroheat installations－Part 11：Particular   requirements for installations using the effect of electromagnetic forces on   liquid metals

KS C IEC 60519-2-2012

电热设备的安全第2部分：电阻加热设备的特殊要求

Safety in electroheat installations－Part 2：Particular   requirements for resistance heating equipment

KS C IEC 60519-21-2012

电热设备的安全第21部分：电阻加热设备的特殊要求加热和熔化玻璃设备

Safety in electroheat installations－Part 21：Particular   requirements for resistance heating equipment－Heating   and melting glass equipment

KS C IEC 60519-3-2012

电热设备的安全第3部分：感应和传导加热及感应熔炼设备的特殊要求

Safety in electroheat installations－Part 3：Particular   requirements for induction and conduction heating and induction melting   installations

KS C IEC 60519-4-2006

电热设备的安全第4部分：电弧炉设备的特殊要求

Safety in electroheat installations－Part 4：Particular   requirements for arc furnace installations

KS C IEC 60519-5-2012

电热装置的安全.第5部分：电热装置的安全.第5部分：

Safety in electroheat installations－Part 5：Safety   in electroheat installations－Part 5：

KS C IEC 60519-6-2003

电热设备的安全第6部分：工业微波加热设备的安全规范

Safety in electroheat installations－Part 6：Specification   for safety in industrial microwave heating equipment

KS C IEC 60519-7-2012

电热装置的安全第7部分：电子枪装置的特殊要求

Safety in electroheat installations－Part 7：Particular   requirements for installations with electron guns

KS C IEC 60519-8-2012

电热设备的安全第8部分：电渣重熔炉的特殊要求

Safety in electroheat installations－Part 8：Particular   requirements for electroslag remelting furnaces

KS C IEC 60519-9-2012

电热设备的安全第9部分：高频介质加热设备的特殊要求

Safety in electroheat installations－Part 9：Particular   requirements for high-frequency dielectric heating installations

KS C IEC 60522-2003

X射线管组件固有滤过的测定

Determination of the permanent filtration   of X-ray tube assemblies

KS C IEC 60523-2013

直流电位差计

Direct-current potentiometers

KS C IEC 60524-2013

直流电阻电压比例箱

Direct-current resistive volt ratio boxes

KS C IEC 60529-2017

由外壳提供的防护等级(IP代码)

Degrees of protection provided by   enclosures(IP Code)

KS C IEC 60530-2007

家用和类似用途电水壶和电水罐性能的测量方法

Methods for measuring the performance of   electric kettles and jugs for household and similar use

KS C IEC 60531-2002

家用储热式房间电暖器.性能测试方法

Methods for measuring the performance of   electric thermal storage water-heaters for household and similar purposes

KS C IEC 60533-2003

船舶电气和电子设施.电磁兼容性

Electrical and electronic installations in   ships－Electromagnetic   compatibility

KS C IEC 60534-4-2015

工业过程控制阀第4部分：检验和例行试验

Industrial-process control valves — Part 4: Inspection and routine   testing

KS C IEC 60535-2002

喷流扇和调速器

Jet fans and regulators

KS C IEC 60544-1-2014

电气绝缘材料. 电离辐射影响的测定. 第1部分: 辐射的交互作用和放射量测定

Electrical insulating materials ― Determination of the effects of   ionizing radiation — Part 1: Radiation interaction   and dosimetry

KS C IEC 60544-2-2014

电绝缘材料.测定电离辐射对绝缘材料的效应.第2部分:辐照和试验规程

Electrical insulating materials — Determination of the effects of   ionizing radiation on insulating materials — Part 2:   Procedures for irradiation and test

KS C IEC 60544-4-2014

电绝缘材料.电离辐射效应的测定.第4部分:在辐射环境中工作的分类体系

Electrical insulating materials ― Determination of the effects of   ionizing radiation — Part 4: Classification system   for service in radiation environments

KS C IEC 60545-2006

水轮机调试、运行和维护指南

Guide for commissioning, operation and   maintenance of hydraulic turbines

KS C IEC 60549-2003

并联电力电容器外部保护用高压熔断器

High－voltage fuses for the external protection of shunt power   capacitors

KS C IEC 60554-1-2014

电工用纤维素纸规范第1部分：定义和一般要求

Specification for cellulosic papers for   electrical purposes —   Part 1: Definitions and general requirements

KS C IEC 60554-2-2003

电工用纤维素纸第2部分：试验方法

Cellulosic papers for electrical purposes－Part 2：Methods   of test

KS C IEC 60554-3-2015

电工用纤维素纸规范第3部分：单项材料规范活页1:通用电工纸

Specification for cellulosic papers for   electrical purposes－Part   3: Specifications for individual materials－Sheet 1:   General purpose electrical paper

KS C IEC 60554-3-2003

电工用纤维素纸规范第3部分：单项材料规范活页2:电容器纸

Specification for cellulosic papers for   electrical purposes－Part   3: Specifications for individual materials－Sheet 2:   Capacitor paper

KS C IEC 60554-3-2003

电工用纤维素纸规范第3部分：单项材料规范活页3:皱纹纸

Specification for cellulosic papers for   electrical purposes－Part   3：Specifications for individual materials－ Sheet 3：Crepe paper

KS C IEC 60554-3-2003

电工用纤维素纸规范第3部分：单项材料规范活页4:电解电容器纸

Specification for cellulosic papers for   electrical purposes－Part   3：Specifications for individual materials－Sheet 4：Electrolytic capacitor paper

KS C IEC 60554-3-2015

电工用纤维素纸规范第3部分：单项材料规范活页5:特种纸

Specification for cellulosic papers for   electrical purposes－Part   3：Specifications for individual materials－Sheet 5：Special papers

KS C IEC 60560-2014

电机用刷握的定义和术语

Definition and terminology of brush-holders

KS C IEC 60564-2013

测量电阻用直流电桥

D.C. bridges for measuring resistance

KS C IEC 60567-2018

注油电气设备.气体抽样以及游离和溶解气体分析指南

Oil-filled electrical equipment — Sampling of gases and of oil for   analysis of free and dissolved gases — Guidance

KS C IEC 60568-2009

核电站.仪器安全重要性.动力反应堆内中子注量率(通量)测量用堆芯仪表

In-core instrumentation for neutron fluence   rate(flux) measurements in power reactor

KS C IEC 60570-2003

灯具用电源导轨装置

Electrical supply track systems for   luminaires

KS C IEC 60571-2002

铁路车辆用电子设备

Electronic equipment used on rail vehicles

KS C IEC 60580-2018

医用电气设备.剂量面积仪

Medical electrical equipment — Dose area product meters

KS C IEC 60581-1-2003

高保真音响设备和系统最低性能要求第1部分：总则

High fidelity audio equipment and systems：Minimum performance requirements－Part 1：General

KS C IEC 60581-10-2003

高保真音响设备和系统最低性能要求第10部分：耳机

High fidelity audio equipment and systems：Minimum performance requirements－Part 10：Headphones

KS C IEC 60581-5-2003

高保真音响设备和系统最低性能要求第5部分：传声器

High fidelity audio equipment and systems：Minimum performance requirements－Part 5：Microphones

KS C IEC 60581-7-2003

高保真音响设备和系统最低性能要求第7部分：扬声器

High fidelity audio equipment and systems：Minimum performance requirements－Part 7：Loudspeakers

KS C IEC 60584-1-2014

热电偶.第1部分：参考表

Thermocouples — Part 1: Reference tables

KS C IEC 60584-3-2003

补偿导线

Compensating lead wires

KS C IEC 60587-2017

评定在严酷环境条件下使用的电气绝缘材料耐起痕和耐蚀损的试验方法

Test methods for evaluating resistance to   tracking and erosion ofelectrical insulating materials used under severe   ambient conditions

KS C IEC 60588-6-2014

变压器和电容器用氯化联苯 第6部分:材料对电容器用氯化联苯影响的筛选试验

Askarels for transformers and capacitors — Part 6: Screening test for effects   of materials on capacitor askarels

KS C IEC 60589-2008

测定电气绝缘材料中离子杂质的液体萃取试验方法

Methods of test for the determination of   ionic impurities in electrical insulating materials by extraction with   liquids

KS C IEC 60590-2014

新矿物绝缘油中芳香烃含量的测定

Determination of the aromatic hydrocarbon   content of new mineral insulating oils

KS C IEC 60598-1-2011

灯具第1部分：一般要求和试验

Luminaires－Part 1：General requirements   and tests

KS C IEC 60598-2-2003

灯具第2-10部分：特殊要求便携式吸引儿童的灯具

Luminaires－Part 2－10：Particular requirements－Portable   child-appealing luminaires

KS C IEC 60598-2-2002

灯具第2部分：特殊要求第1节：固定式通用灯具

Luminaires－Part 2：Particular requirements－Section 1：Fixed general purpose luminaires

KS C IEC 60598-2-2011

灯具第2-13部分：特殊要求地面嵌入式灯具

Luminaires－Part 2-13：Particular   requirements－Ground recessed luminaires

KS C IEC 60598-2-2003

灯具第2-17部分：特殊要求舞台照明、电视、电影摄影棚（室内外）用灯具

Luminaires－Part 2－17：Particular requirements－Luminaires for   stage lighting, television, film and photographic studios(outdoor and indoor)

KS C IEC 60598-2-2015

灯具第2-18部分：特殊要求游泳池及类似场所用灯具

Luminaires－Part 2－18：Particular requirements－Luminaires for   swimming pools and similar applications

KS C IEC 60598-2-2003

灯具第2-19部分：特殊要求空气处理灯具（安全要求）

Luminaires－Part 2－19：Particular requirements－Air－handling luminaires(safety requirements)

KS C IEC 60598-2-2003

灯具第2-20部分：特殊要求灯链

Luminaires－Part 2－20：Particular requirements－Lighting chains

KS C IEC 60598-2-2002

灯具第2部分：特殊要求第2节：嵌入式灯具

Luminaires－Part 2：Particular requirements－Section 2：Recessed luminaires

KS C IEC 60598-2-2015

灯具第2-22部分：特殊要求应急照明灯具

Luminaires — Part 2-22: Particular requirements — Luminaires for emergency lighting

KS C IEC 60598-2-2003

灯具第2-23部分：特殊要求白炽灯用超低压照明系统

Luminaires－Part 2－23：Particular requirements－Extra low voltage   lighting systems for filament lamps

KS C IEC 60598-2-2015

灯具.第2-24部分：特殊要求.限定表面温度的灯具

Luminaires — Part 2-24: Particular requirements — Luminaires with limited surface temperatures

KS C IEC 60598-2-2015

灯具.第2-25部分：特殊要求.医院和医疗建筑临床区用灯具

Luminaires — Part 2-25: Particular requirements — Luminaires for use in clinical areas of hospitals and health care   buildings

KS C IEC 60598-2-2014

灯具第2-3部分：特殊要求道路和街道照明灯具

Luminaires — Part 2-3: Particular requirements — Luminaires for road and street lighting

KS C IEC 60598-2-2003

灯具第2-4部分：特殊要求便携式通用灯具

Luminaires－Part 2－4：Particular requirements－Portable general   purpose luminaires

KS C IEC 60598-2-2003

灯具第2-5部分：特殊要求泛光灯

Luminaires－Part 2－5：Particular requirements－Floodlights

KS C IEC 60598-2-2003

灯具第2-6部分：特殊要求白炽灯用带内置变压器或转换器的灯具

Luminaires－Part 2－6：Particular requirements－Luminaires with   built－in transformers or convertors for filament   lamps

KS C IEC 60598-2-2003

灯具第2-7部分：特殊要求花园用便携式灯具

Luminaires－Part 2－7：Particular requirements－Portable   luminaires for garden use

KS C IEC 60598-2-2018

灯具第2-8部分：特殊要求手提灯

Luminaires－Part 2-8：Particular   requirements－Handlamps

KS C IEC 60598-2-2003

灯具第2-9部分：特殊要求照相和胶片灯具（非专业）

Luminaires－Part 2－9：Particular requirements－Photo and film   luminaires(non－professional)

KS C IEC 60599-2018

使用中的浸渍矿物油的电气设备.溶解和游离气体分析结果解释的指南

Mineral oil-filled electrical equipment in   service — Guidance on the   interpretation of dissolved and free gases analysis

KS C IEC 60601-1-2017

医用电气设备第1-10部分：基本安全和基本性能通用要求并列标准：生理闭环控制器研制要求

Medical electrical equipment－Part 1-10：General   requirements for basic safety and essential performance－Collateral Standard：Requirements for the   development of physiologic closed-loop controllers

KS C IEC 60601-1-2018

医用电气设备.第1-11部分：基本安全和基本性能的一般要求.并列标准：家庭保健环境中使用的医用电气设备和医用电气系统的要求：

Medical electrical equipment — Part 1-11: General requirements for   basic safety and essential performance — Collateral   Standard:Requirements for medical electrical equipment and medical electrical   systems used in the home healthcare environment:

KS C IEC 60601-1-2011

医用电气设备第1部分：基本安全和基本性能通用要求

Medical electrical equipment－Part 1：General   requirements for basic safety and essential performance

KS C IEC 60601-1-2017

医用电气设备.第1-2部分：基本安全和基本性能的一般要求.并列标准：电磁干扰.要求和试验

Medical electrical equipment — Part 1-2: General requirements for   basic safety and essential performance — Collateral   standard:Electromagnetic disturbances — Requirements   and tests

KS C IEC 60601-1-2017

医用电气设备第1-3部分：基本安全和基本性能的一般要求并列标准：诊断X射线设备的辐射防护

Medical electrical equipment－Part 1-3：General   requirements for basic safety and essential performance－Collateral Standard：Radiation protection   in diagnostic X-ray equipment

KS C IEC 60601-1-2018

医用电气设备第1-6部分：基本安全和基本性能的一般要求并列标准：可用性

Medical electrical equipment－Part 1-6：General   requirements for basic safety and essential performance－Collateral Standard：Usability

KS C IEC 60601-1-2017

医用电气设备第1-8部分：安全通用要求并列标准：医用电气设备和医用电气系统报警系统的一般要求、试验和指南

Medical electrical equipment－Part 1－8：Generalrequirements for safety－Collateral   standard：General requirements, tests and guidance for   alarm systems inmedical electrical equipment and medical electrical systems

KS C IEC 60601-1-2018

医用电气设备.第1-9部分：基本安全和基本性能的一般要求.并列标准：环境意识设计的要求

Medical electrical equipment — Part 1-9: General requirements for   basic safety and essential performance — Collateral   Standard:Requirements for environmentally conscious design

KS C IEC 60601-2-2008

低频治疗设备

Low frequency therapy equipment

KS C IEC 60601-2-2018

医用电气设备.第2-11部分：γ射线治疗设备基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-11: Particular requirements   for the basic safety and essential performance of gamma beam therapy   equipment

KS C IEC 60601-2-2017

医用电气设备第2-1部分：1～50MeV电子加速器安全专用要求

Medical Electrical Equipment－Part 2-1：Particular   requirements for the safety of electron accelerators in the range 1 MeV to 50   MeV

KS C IEC 60601-2-2018

医用电气设备.第2-16部分：血液透析、血液透析过滤和血液过滤设备的基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-16: Particular requirements   for the basic safety and essential performance of haemodialysis,   haemodiafiltration and haemofiltration equipment

KS C IEC 60601-2-2018

医用电气设备.第2-17部分：自动控制近距离放射治疗后装设备基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-17: Particular requirements   for the basic safety and essential performance of automatically-controlled   brachytherapy afterloading equipment

KS C IEC 60601-2-2017

医用电气设备第2-19部分：婴儿培养箱基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-19：Particular   requirements for the basic safety and essential performance of infant   incubators

KS C IEC 60601-2-2017

医用电气设备第2-20部分：婴儿运输培养箱基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2－20：Particular requirements for the basic safety and essential   performance of infant transport incubators

KS C IEC 60601-2-2017

医用电气设备第2-21部分：婴儿辐射加热器基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-21：Particular   requirementsfor the basic safety and essential performance of infant radiant   warmers

KS C IEC 60601-2-2017

医用电气设备第2-2部分：高频外科设备和高频外科附件基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-2：Particular   requirements for the basic safety and essential performance of high frequency   surgical equipment and high frequency surgical accessories

KS C IEC 60601-2-2017

医用电气设备第2-22部分：外科、美容、治疗和诊断用激光设备基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-22：Particular   requirements for basic safety and essential performance of surgical,   cosmetic,therapeutic and diagnostic laser equipment

KS C IEC 60601-2-2018

医用电气设备.第2-23部分：经皮分压监测设备基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-23: Particular requirements   for the basic safety and essential performance of transcutaneous partial   pressure monitoring equipment

KS C IEC 60601-2-2008

输液泵和控制器

Infusion pumps and controllers

KS C IEC 60601-2-2017

医用电气设备.第2-25部分：心电图机基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-25: Particular requirements   for the basic safety and essential performance of electrocardiographs

KS C IEC 60601-2-2017

医用电气设备.第2-26部分：脑电图仪基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-26: Particular requirements   for the basic safety and essential performance of electroencephalographs

KS C IEC 60601-2-2017

医用电气设备第2-27部分：心电监护设备基本安全和基本性能专用要求

Medical electrical equipment－Part 2-27：Particular   requirements for the basic safety and essential performance of   electrocardiographic monitoring equipment

KS C IEC 60601-2-2011

医用电气设备第2-28部分：医用诊断X射线管组件基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-28：Particular   requirements for the basic safety and essential performance of X-ray tube   assemblies for medical diagnosis

KS C IEC 60601-2-2017

医用电气设备.第2-29部分：放射治疗模拟器基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-29: Particular requirements   for the basic safety and essential performance of radiotherapy simulators

KS C IEC 60601-2-2017

医用电气设备.第2-31部分：具有内部电源的外部心脏起搏器的基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-31: Particular requirements   for the basic safety and essential performance of external cardiac pacemakers   with internal power source

KS C IEC 60601-2-2017

医用电气设备.第2-3部分：短波治疗设备基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-3: Particular requirements   for the basic safety and essential performance of short-wave therapy   equipment

KS C IEC 60601-2-2017

医用电气设备第2-33部分：医疗诊断用磁共振设备基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-33：Particular   requirements for the basic safety and essential performance of magnetic   resonance equipment for medical diagnosis

KS C IEC 60601-2-2018

医用电气设备.第2-34部分：有创血压监测设备基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-34: Particular requirements   for the basic safety and essential performance of invasive blood pressure   monitoring equipment

KS C IEC 60601-2-2008

体外诱导碎石术

Extracorporeally induced lithotripsy

KS C IEC 60601-2-2017

医用电气设备第2-37部分：超声医疗诊断和监测设备基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-37：Particular   requirements for the basic safety and essential performance of ultrasonic   medical diagnostic and monitoring equipment

KS C IEC 60601-2-2008

医院病床

Hospital beds

KS C IEC 60601-2-2017

医用电气设备.第2-39部分：腹膜透析设备基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-39: Particular requirements   for basic safety and essential performance of peritoneal dialysis equipment

KS C IEC 60601-2-2008

肌电图仪和诱发反应装置

Electromyographs and evoked response   equipment

KS C IEC 60601-2-2017

医用电气设备第2-41部分：外科灯具和诊断用灯具基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-41：Particular   requirements for the basic safety and essential performance of surgical   luminaires and luminaires for diagnosis

KS C IEC 60601-2-2017

医用电气设备第2-4部分：心脏除颤器基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-4: Particular requirements   for the basic safety and essential performance of cardiac defibrillators

KS C IEC 60601-2-2011

医用电气设备第2-43部分：介入手术用X射线设备基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-43：particular   requirements for the basic safety and essential performance of X-ray   equipment for interventional procedures

KS C IEC 60601-2-2017

医用电气设备第2-44部分：计算机断层摄影X射线设备基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-44：Particular   requirements for the basic safety and essential performance of x-ray   equipment for computed tomography

KS C IEC 60601-2-2017

医用电气设备第2-45部分：乳腺X射线摄影设备和乳腺立体定向装置基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-45：Particular   requirements for the basic safety and essential performance of mammographic   X-ray equipment and mammographic stereotactic devices

KS C IEC 60601-2-2011

医用电气设备第2-46部分：手术台基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-46：Particular   requirements for the basic safety and essential performance of operating   tables

KS C IEC 60601-2-2017

医用电气设备第2-47部分：动态心电图系统安全（包括基本性能）的特殊要求

Medical electrical equipment－Part 2-47：Particular   requirements for the safety, including essential performance, of ambulatory   electrocardiographic systems

KS C IEC 60601-2-2011

医用电气设备第2-49部分：多功能病人监护设备基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-49：Particular   requirements for the basic safety and essential performance of multifunction   patient monitoring equipment

KS C IEC 60601-2-2017

医用电气设备.第2-50部分：婴儿光治疗设备基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-50: Particular requirements   for the basic safety and essential performance of infant phototherapy   equipment

KS C IEC 60601-2-2011

医用电气设备第2-5部分：超声理疗设备基本安全和基本性能的特殊要求

Medical electrical equipment－Part 2-5：Particular   requirements for the basic safety and essential performance of ultrasonic   physiotherapy equipment

KS C IEC 60601-2-2018

医用电气设备.第2-54部分：射线照相和射线照相用X射线设备的基本安全和基本性能的特殊要求

Medical electrical equipments — Parts 2-54: Particular requirements   for the basic safety and essential performance of X-ray equipment for   radiography and radioscopy

KS C IEC 60601-2-2017

医用电气设备第2部分：微波治疗设备安全专用要求

Medical electrical epuipment－Part 2：Particular   requirements for the safety of microwave therapy equipment

KS C IEC 60601-2-2018

医用电气设备第2-63部分：牙科口腔外X射线设备基本安全和基本性能的特殊要求

Medical electrical equipment ─ Part2-63: Particular requirements   for the basic safety and essential performance of dental extra-oral X-ray   equipment

KS C IEC 60601-2-2018

医用电气设备第2-64部分：光离子束医用电气设备基本安全和基本性能专用要求

Medical electrical equipment ─ Part 2-64: Particular requirements   for the basic safety and essential performance of light ion beam medical   electrical equipment

KS C IEC 60601-2-2018

医用电气设备第2-65部分：牙科口腔内X射线设备基本安全和基本性能的特殊要求

Medical electrical equipment ─ Part 2-65: Particular requirements   for the basic safety and essential performance of dental intra-oral X-ray   equipment

KS C IEC 60601-2-2017

医用电气设备.第2-66部分：听力仪器和听力仪器系统的基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-66: Particular requirements   for the basic safety and essential performance of hearing instruments and   hearing instrument systems

KS C IEC 60601-2-2018

医用电气设备第2-68部分：电子加速器、光离子束治疗设备和放射性核素束治疗设备用X射线图像引导放射治疗设备基本安全和基本性能的特殊要求

Medical electrical equipment ─ Part 2-68: Particular requirements   for the basic safety and essential performance of X-ray-based image-guided   radiotherapy equipment for use with electron accelerators, light ion beam   therapy equipment and radionuclide beam therapy equipment

KS C IEC 60601-2-2017

医用电气设备.第2-8部分：在10kV-1mV范围内操作的治疗性X射线设备的基本安全和基本性能的特殊要求

Medical electrical equipment — Part 2-8: Particular requirements   for the basic safety and essential performance of therapeutic X-ray equipment   operating in the range 10 kV to 1 MV

KS C IEC 60603-10-2005

印制板用频率低于3MHz的连接器第10部分：基本网格2.54mm（0.1in）倒排式印制板用两件式连接器

Connectors for frequencies below 3 MHz for   use with printed boards－Part   10：Two-part connectors for printed boards for basic   grid of 2.54 mm(0.1 in), inverted type

KS C IEC 60603-12-2014

印制板用频率低于3MHz的连接器第12部分：集成电路用系列插座尺寸、一般要求和试验的详细规范

Connectors for frequencies below 3 MHz for   use with printed boards — Part 12: Detail specification for dimensions, general   requirements and tests for a range of sockets designed for use with   integrated circuits

KS C IEC 60603-2-2014

印制板用频率低于3MHz的连接器第2部分：有质量评定的基本网格为2.54mm（0.1in）的印制板用两件式连接器的详细规范

Connectors for frequencies below 3 MHz for   use with printed boards — Part 2: Detail specification for two-part connectors with   assessed quality, for printed boards, for basic grid of 2.54 mm(0.1 in) with   common mounting features

KS C IEC 60603-3-2005

印制板用频率低于3MHz的连接器第3部分：接触件中心间距为2.54mm（0.100in）和终端间距相同的两件式印制板连接器

Connectors for frequencies below 3MHz for   use with printed boards－   Part 3：Two-part connectors for printed boards having   contacts spaced at 2.54 mm(0.100 in) centres and staggered terminations at   that same spacing

KS C IEC 60603-4-2005

印制板用频率低于3MHz的连接器第4部分：接触件中心间距为1.91mm（0.075 in）和终端间距相同的两件式印制板连接器

Connectors for frequencies below 3 MHz for   use with printed boards－Part   4：Two-part connectors for printed boards having   contacts spaced at 1.91 mm(0.075 in) centres and staggered terminations at   that same spacing

KS C IEC 60603-5-2014

印制板用频率低于3MHz的连接器第5部分：间隔为2.54mm（0.1in）的双面印制板用边缘插座连接器和两件式连接器

Connectors for frequencies below 3 MHz for   use with printed boards — Part 5: Edge-socket connectors and two-part connectors for   double-sided printed boards with 2.54 mm(0.1 in) spacing

KS C IEC 60603-6-2014

印制板用频率低于3MHz的连接器第6部分：标称厚度为1.6 mm（0.063   in）的单面或双面印制板用接触间距为2.54 mm（0.1   in）的边缘插座连接器和印制板连接器

Connectors for frequencies below 3 MHz for   use with printed boards — Part 6: Edge-socket connectors and printed-board connectors with   2.54 mm(0.1 in) contact spacing for single or double-sided printed boards of   1.6 mm(0.063 in) nominal thickness

KS C IEC 60603-7-2005

印制板用频率低于3MHz的连接器第7部分：经质量评定的具有通用配合特性的8路固定和自由连接器详细规范

Connectors for frequencies below 3MHz for   use with printed boards－Part   7：Detail specification for connectors, 8-way,   including fixed and free connectors with common mating features, with   assessed quality

KS C IEC 60613-2017

医用诊断旋转阳极X射线管的电、热和负载特性

Electrical and loading characteristics of   X-ray tube assemblies for medical diagnosis

KS C IEC 60614-1-2014

电气装置用导管规范第1部分：一般要求

Conduits for electrical installations — Specification — Part 1: General requirements

KS C IEC 60614-2-2014

电气装置用导管规范第2部分：导管的特殊规范第1节：金属导管

Specification for conduits for electrical   installations — Part 2: Particular   specifications for conduits — Section One: Metal   conduits

KS C IEC 60614-2-2014

电气装置用导管规范第2部分：导管的特殊规范第3节：柔性

Specification for conduits for electrical   installations — Part 2: Particular   specifications for conduits — Section Three: Pliable

KS C IEC 60614-2-2014

电气装置用导管规范第2部分：导管的特殊规范第4节：绝缘材料柔韧自恢复导管

Specification for conduits for electrical   installations — Part 2: Particular   specifications for conduits — Section Four: Pliable   self-recovering conduits of insulating materials

KS C IEC 60614-2-2014

电气装置用导管规范第2部分：导管的特殊规范第5节：软导管

Specifications for conduits for electrical   installations — Part 2: Particular   specifications for conduits — Section 5: Flexible   conduits

KS C IEC 60614-2-2014

电气装置用导管规范第2部分：导管的特殊规范第6节：金属或复合材料柔韧导管

Specifications for conduits for electrical   installations — Part 2: Particular   specifications for conduits — Section 6: Pliable   conduits of metal or composite materials

KS C IEC 60615-2013

微波装置用语

Terminology for microwave apparatus

KS C IEC 60618-2013

感应分压器

Inductive voltage dividers

KS C IEC 60619-2015

电动食品加工机.性能测试方法

Electrically operated food preparation   appliances — Methods for measuring   the performance

KS C IEC 60622-2003

含碱性或其它非酸性电解液的蓄电池和蓄电池组.密封镍镉方形可充电单体电池

Secondary cells and batteries containing   alkaline or other non-acid electrolytes－Sealed nickel-cadmium prismatic rechargeable single cells

KS C IEC 60623-2015

含碱性或其他非酸性电解质的蓄电池和蓄电池组.开口镉镍方形可充电单体电池

Secondary cells and batteries containing   alkaline or other non-acid electrolytes — Vented nickel-cadmium prismatic rechargeable single cells

KS C IEC 60624-2013

脉冲发生器性能的表现

Expression of the performance of pulse   generators

KS C IEC 60626-1-2015

电气绝缘用柔软复合材料第1部分：定义和一般要求

Combined flexible materials for electrical   insulation－Part 1：Definitions and general requirements

KS C IEC 60626-2-2015

电绝缘用柔软复合材料第2部分：试验方法

Combined flexible materials for electrical   insulation－Part 2：Methods of test

KS C IEC 60626-3-2017

电绝缘用柔软复合材料第3部分：单项材料规范

Combined flexible materials for electrical   insulation－Part 3：Specifications for individual materials

KS C IEC 60627-2003

诊断用X-射线成像设备.通用和大图形防散射滤栅的特性

Diagnostic X-ray imaging equipment－Characteristics of general purpose   and mammographic anti-scatter grids

KS C IEC 60630-A-2014

白炽灯的最大灯轮廓

Maximum lamp outlines for incandescent   lamps

KS C IEC 60633-2002

高压直流(HVDC)输电术语

Terminology for high-voltage direct   current(HVDC) transmission

KS C IEC 60634-A-2014

灯具热试验用热试验源(H.T.S.)灯

Heat Test Source(H.T.S) lamps for carrying   out heating tests on luminaires

KS C IEC 60638-2003

牵引用旋转电机换向的评定和确定等级准则

Criteria for assessing and coding of the   commutation of rotating electrical machines for traction

KS C IEC 60641-1-2015

电工用压纸板和薄纸板规范第1部分：定义和一般要求

Specification for pressboard and presspaper   for electrical purposes－Part   1：Definitions and general requirements

KS C IEC 60641-2-2015

电工用压纸板和薄纸板规范第2部分：试验方法

Specification for pressboard and presspaper   for electrical purposes－Part   2：Methods of test

KS C IEC 60641-3-2015

电工用纸板和薄纸板规范第3部分：单项材料规范活页1:SB.0.1、B.2.1、B.2.3、B.3.1、B.3.3、B.4.1、B.4.3、B.5.1、B.6.1和B.7.1型纸板的要求

Specification for pressboard and presspaper   for electrical purposes－Part   3：Specifications for individual materials－Sheet 1：Requirements for pressboard,   typesB.0.1, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1

KS C IEC 60641-3-2015

电工用压纸板和薄纸板规范第3部分：单项材料规范活页2:P.2.1、P.4.1、P.4.2、P.4.3、P.6.1和P.7.1型薄纸板的要求

Specification for pressboard and presspaper   for electrical purposes－Part   3：Specifications for individual materials－Sheet 2：Requirements for presspaper, types   P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1

KS C IEC 60642-3-2002

压电陶瓷谐振器.第3部分:标准外形

Piezoelectric ceramic resonators－Part 3：Standard   outlines

KS C IEC 60645-1A-2017

电声学.测听设备.第1部分:纯音和言语测听设备

Electroacoustics — Audiometric equipment — Part 1: Equipment for pure-tone audiometry

KS C IEC 60645-2A-2017

电声学.测听设备.第2部分:言语测听设备

Electroacoustics — Audiometric equipment — Part 2: Equipment for speech audiometry

KS C IEC 60645-3A-2017

电声学.听力测定设备.第3部分:短持续测试信号

Electroacoustics — Audiometers — Part 3：Auditory test signals of short   duration for audiometric and neuro-otological purposes

KS C IEC 60645-5A-2017

电声学.听力测定设备.第5部分:听觉声阻抗/导纳测量用设备

Electroacoustics — Audiometric equipment — Part 5：Instruments for the measurement of   aural acoustic impedance/admittance

KS C IEC 60645-6-2017

电声学.听力测定设备.第6部分:听觉发射的测量仪器

Electroacoustics — Audiometric equipment — Part 6: Instruments for the measurement of otoacoustic emissions

KS C IEC 60645-7-2017

电声学.听力测定设备.第7部分:听觉脑干反应的测量仪器

Electroacoustics — Audiometric equipment — Part 7: Instruments for the measurement of auditory brainstem   responses

KS C IEC 60647-2008

电源用磁性氧化物磁芯(EC磁芯)的尺寸

Dimensions for magnetic oxide cores   intended for use in power supplies(EC-cores)

KS C IEC 60648-2014

聚合电绝缘薄膜和片材.摩擦系数的确定方法

Method of test for coefficients of friction   of plastic film and sheeting for use as electrical insulation

KS C IEC 60650-2009

模拟计数率表.特性和试验方法

Analogue counting ratemeters－Characteristics and test methods

KS C IEC 60652-2014

架空线结构的载荷试验

Loading tests on overhead line structures

KS C IEC 60654-2-2014

工业过程测量和控制设备的运行条件 第2部分:动力

Operating conditions for industrial-process   measurement and control equipment — Part 2: Power

KS C IEC 60654-4-2014

工业过程测量和控制设备的运行条件 第4部分:腐蚀和侵蚀影响

Operating conditions for industrial-process   measurement and control equipment — Part 4: Corrosive and erosive influences

KS C IEC 60660-2005

标称电压1000V至300kV(不含)系统用有机材料户内支柱绝缘子的试验

Insulators－Tests on indoor post insulators of organic material   for systems with nominal voltages greater than 1 000V up to but not including   300 kV

KS C IEC 60661-2015

家用电咖啡壶性能测试方法

Methods for measuring the performance of   electric household coffee makers

KS C IEC 60662-2014

高压钠蒸汽灯

High-pressure sodium vapour lamps

KS C IEC 60664-1-2014

低压系统内设备的绝缘配合第1部分：原则、要求和试验

Insulation coordination for equipment   within low-voltage systems — Part 1: Principles, requirement and tests

KS C IEC 60664-3-2014

低压系统内设备的绝缘配合.第3部分：用涂层实现印制板组件的绝缘配合

Insulation coordination for equipment   within low-voltage systmes — Part 3：Use of coatings to achieve   insulation coordination of printed board assemblies

KS C IEC 60664-4-2014

低压系统内设备的绝缘配合.第4部分：高频电压应力的考虑

Insulation coordination for equipment   within low-voltage systems — Part 4: Consideration of high-frequency voltage stress

KS C IEC 60664-5-2005

低压系统内设备的绝缘配合第5部分：间隙和爬电距离等于或小于2 mm的综合测定方法

Insulation coordination for equipment   within low-voltage systems－Part 5：A comprehensive method for   determining clearances and creepage distances equal to or less than 2 mm

KS C IEC 60665-2002

家用和类似用途的交流排气扇及其调速器

AC electric ventilating fans and regulators   for household and similar purposes

KS C IEC 60667-1-2001

电工用硫化纤维规范第1部分：定义和一般要求

Specification for vulcanized fibre for   electrical purposes－Part   1：Definitions and general requirements

KS C IEC 60667-2-2018

电工用硫化纤维规范第2部分：试验方法

Specification for vulcanized fibre for   electrical purposes —   Part 2: Methods of test

KS C IEC 60667-3-2018

电工用硫化纤维规范第3-1部分：单项材料规范平板

Specification for vulcanized fibre for   electrical purposes —   Part 3-1: Specifications for individual materials —   Flat sheets

KS C IEC 60669-1-2008

家用和类似用途固定电气设备开关.第1部分:通用要求

Switches for household and similar   fixed-electrical installations－Part 1：General requirements

KS C IEC 60669-2-2005

家用和类似的固定电气设施用开关.第2-1部分:特殊要求.电子开关

Switches for household and similar fixed   electrical installations－ Part 2－1：Particular   requirements－Electronic switches

KS C IEC 60669-2-2008

家用和类似的固定电气设施用开关.第2-2部分:电磁遥控开关(RCS)的特殊要求

Switches for household and similar fixed   electrical installations－Part 2：Particular requirements－Section 2：Electromagnetic remote-control   switches(RCS)

KS C IEC 60669-2-2008

家用和类似固定电气装置用开关.第2-3部分:延时开关(TDS)的特殊要求

Switches for household and similar fixed   electrical installations－Part 2－3：Particular   requirements－Time delay switches(TDS)

KS C IEC 60670-1-2014

家用和类似用途固定电气装置的电气附件箱和外壳.第1部分：一般要求

Boxes and enclosures for electrical   accessories for household and similar fixed electrical installations — Part 1: General requirements

KS C IEC 60671-2012

核电厂安全重要仪表和控制系统监视试验

Nuclear power plants－Instrumentation and control systems   important to safety－Surveillance testing

KS C IEC 60672-1-2003

陶瓷和玻璃绝缘材料第1部分：定义和分类

Ceramic and glass insulating materials－Part 1：Definitions   and classification

KS C IEC 60672-2-2017

陶瓷和玻璃绝缘材料第2部分：试验方法

Ceramic and glass insulating materials — Part 2: Methods of test

KS C IEC 60672-3-2017

陶瓷和玻璃绝缘材料第3部分：单项材料规范

Ceramic and glass-insulating materials — Part 3: Specifications for   individual materials

KS C IEC 60674-1-2008

电工用塑料薄膜规范第1部分：定义和一般要求

Specification for plastic films for   electrical purposes－Part   1：Definitions and general requirements

KS C IEC 60674-2-2014

电工用塑料薄膜规范第2部分：试验方法

Specification for plastic films for   electrical purposes ―   Part 2: Methods of test

KS C IEC 60674-3-2014

电工用塑料薄膜第3部分：单项材料规范活页1:电容器用双轴取向聚丙烯（PP）薄膜

Plastic films for electrical purposes — Part 3: Specifications for   individual materials — Sheet 1: Biaxially oriented   polypropylene(PP) films for capacitors

KS C IEC 60674-3-2003

电工用塑料薄膜规范第3部分：单项材料规范活页2:电绝缘用平衡双轴取向聚对苯二甲酸乙二醇酯（PET）薄膜的要求

Specification for plastic films for   electrical purposes－Part   3：Specifications for individual materials－Sheet 2：Requirements for balanced   biaxially oriented polyethylene terephthalate(PET) films used for electrical   insulation

KS C IEC 60674-3-2014

电工用塑料薄膜规范第3部分：单项材料规范活页3:对电绝缘用聚碳酸酯（PC）薄膜的要求

Specification for plastic films for   electrical purposes —   Part 3: Specifications for individual materials —   Sheet 3: Requirements for polycarbonate(PC) films used for electrical   insulation

KS C IEC 60674-3-2014

电工用塑料薄膜规范第3部分：单项材料规范活页4-6:对电绝缘用聚酰亚胺薄膜的要求

Specification for plastic films for   electrical purposes —   Part 3: Specifications for individual materials —   Sheets 4 to 6: Requirements for polyimide films used for electrical insulation

KS C IEC 60674-3-2014

电工用塑料薄膜规范第3部分：单项材料规范活页7:对电绝缘用氟乙烯丙烯（FEP）薄膜的要求

Specification for plastic films for   electrical purposes —   Part 3: Specifications for individual materials —   Sheet 7: Requirements for fluoroethylenepropylene(FEP) films used for   electrical insulation

KS C IEC 60675-2002

家用直热式房间电暖器.性能测试方法

Household electric direct－acting room heaters－Methods for measuring performance

KS C IEC 60676-2006

工业电热设备直接电弧炉试验方法

Industrial electroheating equipment－Test methods for direct arc furnaces

KS C IEC 60679-4-2002

经质量评定的石英晶体振荡器第4-1部分：空白详细规范能力批准

Quartz crystal controlled oscillators of   assessed quality－Part   4－1 : Blank detail specification－Capability approval

KS C IEC 60679-5-2002

经质量评定的石英晶体振荡器第5-1部分：空白详细规范鉴定批准

Quartz crystal controlled oscillators of   assessed quality－Part   5－1：Blank detail specification－Qualification approval

KS C IEC 60680-2006

电热和电化学用等离子设备的试验方法

The methods of plasma equipment for   electroheat applications

KS C IEC 60682-2001

测量石英玻璃夹封部温度的方法

Method of measuring the pinch temperature   of quartz glass lamps

KS C IEC 60683-2006

埋弧炉的试验方法

Test methods for submerged-arc furnaces

KS C IEC 60684-1-2017

绝缘软套管.第1部分：定义和一般要求

Flexible insulating sleeving — Part 1: Definitions and general   requirements

KS C IEC 60684-2-2014

绝缘软管第2部分：试验方法

Flexible insulating sleeving — Part 2: Methods of Test

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.第100至105活页：挤压聚氯乙烯套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheets 100 to 105:   Extruded PVC sleeving

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.活页116和117:挤压氯丁橡胶.一般用途

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheets 116 and 117:   Extruded polychloroprene — General purpose

KS C IEC 60684-3-2014

绝缘软套管.第3部分：各种型号套管规范.第121至124活页：挤压硅树脂套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheets 121 to 124:   Extruded silicone sleeving

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.活页136:挤压氟硅套管.一般用途

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 136: Extruded   fluorosilicone sleeving — General purpose

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.活页145-147:挤压聚四氟乙烯套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheets 145 to 147:   Extruded PTFE sleeving

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.活页151:挤压聚氯乙烯/丁腈橡胶.一般用途

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 151: Extruded   PVC/nitrile rubber — General purpose

KS C IEC 60684-3-2014

绝缘软管第3部分：各种型号软管规范活页165:阻燃有限火灾危险挤压聚烯烃软管

Flexible insulating sleeving ― Part 3: Specifications for   individual types of sleeving ― Sheet 165: Extruded   polyolefin, flame retarded, limited fire hazard sleeving

KS C IEC 60684-3-2017

绝缘软管第3部分：各种型号软管规范活页209:通用阻燃收缩比2:1的热收缩聚烯烃软管

Flexible insulating sleeving — Part 3: Specifications for individual   types of sleeving — Sheet 209: Heat-shrinkable   polyolefin sleeving, general purpose, flame retarded, shrink ratio 2：1

KS C IEC 60684-3-2008

绝缘软套管第3部分：各种型号套管规范活页211:热收缩半刚性聚烯烃套管，收缩比2:1

Flexible insulating sleeving－Part 3：Specifications   for individual types of sleeving－Sheet 211：Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2：1

KS C IEC 60684-3-2017

绝缘软管第3部分：各种型号软管规范活页212:阻燃收缩比2:1的热收缩聚烯烃软管

Flexible insulating sleeving－Part 3：Specification   for individual types of sleeving－Sheet 212：Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio   2：1

KS C IEC 60684-3-2014

绝缘软套管.第3部分：各种型号套管规范.活页214:热收缩聚烯烃套管，不阻燃，收缩比3:1.厚壁和中壁

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 214:   Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1 — Thick and medium wall

KS C IEC 60684-3-2017

绝缘软套管第3部分：各种型号套管规范活页228:阻燃、耐流体、收缩比2:1的热收缩半刚性聚偏二氟乙烯套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 228:   Heat-shrinkable semi-rigid polyvinylidene fluoride sleeving, flame retarded,   fluid resistant, shrink ratio 2：1

KS C IEC 60684-3-2014

绝缘软套管第3部分：各种型号套管规范活页229:阻燃、耐流体、收缩比2:1的热收缩半柔性聚偏氟乙烯套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 229:   Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame   retarded, fluid resistant, shrink ratio 2:1

KS C IEC 60684-3-2008

绝缘软套管第3部分：各种型号套管规范活页233:阻燃、耐流体、收缩比2:1的热收缩氟橡胶套管

Flexible insulating sleeving－Part 3：Specification   for individual types of sleeving－Sheet 233：Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid   resistant, shrink ratio 2：1

KS C IEC 60684-3-2014

绝缘软套管.第3部分：各种型号套管规范.活页240-243:热收缩聚四氟乙烯套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 240 to 243:   Heat-shrinkable PTFE sleeving

KS C IEC 60684-3-2015

绝缘软套管第3部分：各种型号套管规范活页246:不阻燃双壁热收缩聚烯烃套管

Flexible insulating sleeving－Part 3：Specifications   for individual types of sleeving－Sheet 246：Heat-shrinkable polyolefin sleeving, dual wall, non-flame retarded

KS C IEC 60684-3-2008

绝缘软套管第3部分：各种型号套管规范活页248:通用、热收缩、双壁聚烯烃套管、阻燃、收缩比2:1、3:1、4:1

Flexible insulating sleeving－Part 3：Specifications   for individual types of sleeving－Sheet 248：General purpose, heat-shrinkable, dual wall polyolefin sleeving,   flame retarded, shrink ratios 2:1, 3:1, 4:1

KS C IEC 60684-3-2017

绝缘软套管第3部分：各种型号套管规范活页271:阻燃、耐流体、收缩比2:1的热收缩弹性套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 271:   Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink   ratio 2：1

KS C IEC 60684-3-2014

绝缘软套管第3部分：各种型号套管规范活页300:无涂层编织玻璃纤维套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 300: Glass   textile fibre sleeving, braided, uncoated

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.活页320:轻浸渍聚对苯二甲酸乙二醇酯纺织套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 320:   Polyethylene terephthalate textile sleeving, lightly impregnated

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.活页340-342:可膨胀编织聚对苯二甲酸乙二醇酯织物套管

Flexible insulating sleeving — Part 3: Specification for individual   types of sleeving — Sheets 340 to 342: Expandable   braided polyethylene terephthalate textile sleeving

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.活页343-345:无涂层可膨胀编织乙烯-三氟氯乙烯（E-CTFE）纺织套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 343 to 345:   Expandable braided ethylene chlorotrifluoroethylene(E-CTFE) textile sleeving,   uncoated

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.活页400-402：

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 400 to 402:   Glass textile sleeving with silicone elastomer coating

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.活页403-405:丙烯酸基涂层玻璃纤维套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheets 403 to 405:   Glass textile sleeving with acrylic based coating

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.活页406-408:涂有聚氯乙烯涂层的玻璃纤维套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheets 406 to 408:   Glass textile sleeving with PVC based coating

KS C IEC 60684-3-2017

绝缘软套管.第3部分：各种型号套管规范.活页409:聚氨酯（PUR）涂层玻璃纤维套管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheet 409: Glass   textile sleeving with polyurethane(PUR)-based coating

KS C IEC 60684-3-2017

绝缘软管第3部分：各种型号软管规范活页420-422:涂有丙烯酸基涂层的聚对苯二甲酸乙二醇酯纺织软管

Flexible insulating sleeving — Part 3: Specifications for   individual types of sleeving — Sheets 420 to 422:   Polyethylene terephthalate textile sleeving with acrylic based coating

KS C IEC 60688-2013

将交流和直流电量转换成模拟信号或数字信号的电测量变送器.

Electrical measuring transducers for converting   a.c. electrical quantities to analogue or digital signals

KS C IEC 60689-2016

在10 kHz至200   kHz和标准值范围内音叉石英晶体元件的测量和试验方法

Measurement and test methods for tuning   fork quartz crystal units in the range from 10 kHz to 200 kHz and standard   values

KS C IEC 60691-2005

热熔断体.要求和应用指南

Thermal-links－Requirements and application guide

KS C IEC 60692-2009

核仪器.电离辐射密度计.定义和试验方法

Nuclear instrumentation－Density gauges utilizing ionizing   radiation－Definitions and test methods

KS C IEC 60694-2002

高压开关设备和控制设备标准的通用规范

Common specifications for high-voltage   switchgearand controlgear standards

KS C IEC 60695-1-2004

着火危险试验第1-1部分：电工产品着火危险评定指南总则

Fire hazard testing－Part 1－1：Guidance for assessing the fire hazard of electrotechnical   products－General guidelines

KS C IEC 60695-1-2004

着火危险试验第1-2部分：电工产品着火危险评定要求和试验规范的编制指南电子元器件指南

Fire hazard testing－Part 1－2：Guidance for the preparation of requirements and test   specifications for assessing fire hazard of electrotechnical products－Guidance for electronic components

KS C IEC 60695-1-2004

着火危险试验第1-30部分：电工产品着火危险评定指南预选试验规程的使用

Fire hazard testing－Part 1－30：Guidance for assessing the fire hazard of electrotechnical   products－Use of preselection testing procedures

KS C IEC 60695-10-2001

着火危险试验第10部分：将异常热对着火的电工产品影响降至最低的指南和试验方法第2节：用球压试验测定非金属材料制品耐热性的方法

Fire hazard testing－Part 10：Guidance   and test methods for the minimization of the effects of abnormal heat on   electrotechnical products involved in fires－Section 2：Method for testing products made from non-metallic materials for   resistance to heat using the ball pressure test

KS C IEC 60695-10-2014

着火危险试验.第10-3部分：异常热.模具应力消除畸变试验

Fire hazard testing — Part 10-3: Abnormal heat — Mould stress relief distortion test

KS C IEC 60695-11-2017

着火危险试验.第11-2部分：试验火焰.1kw标称预混合火焰.设备、验证试验安排和指南

Fire hazard testing — Part 11-2: Test flames — 1 kW nominal premixed flame — Apparatus,   confirmatory test arrangement and guidance

KS C IEC 60695-11-2005

着火危险试验第11－3部分：试验火焰－500W火焰－仪器和确认试验方法

Fire hazard testing－Part 11－3：Test flames－500 W flames－Apparatus and confirmational test methods

KS C IEC 60695-11-2005

着火危险试验第11－4部分：试验火焰－50W火焰－仪器和确认试验方法

Fire hazard testing－Part 11－4：Test flames－50 W flames－Apparatus and confirmational test methods

KS C IEC 60695-11-2014

着火危险试验.第11-5部分：试验火焰.针状火焰试验方法.设备、确认试验安排和指南

Fire hazard testing — Part 11-5: Test flames — Needle-flame test method — Apparatus,   confirmatory test arrangement and guidance

KS C IEC 60695-2-2001

着火危险试验第2-10部分：基于灼热/热丝的试验方法：灼热丝装置和通用试验程序

Fire hazard testing－Part 2－10：Glowing/hot-wire based test methods：Glow-wire   apparatus and common test procedure

KS C IEC 60695-2-2002

着火危险试验第2部分：试验方法第1节/活页0:灼热丝试验方法总则

Fire hazard testing－Part 2：Test   methods－Section 1/Sheet 0：Glow－wire test methods－General

KS C IEC 60695-2-2002

着火危险试验第2部分：试验方法第1节/活页1:热线终端产品试验和指南

Fire hazard testing－Part 2：Test   methods－Section 1/Sheet 1：Glow-wire   end-product test and guidance

KS C IEC 60695-2-2014

着火危险试验.第2-11部分：基于灼热/热丝的试验方法.终端产品的灼热丝易燃性试验方法

Fire hazard testing — Part 2-11: Glowing/hot-wire based   test methods — Glow-wire flammability test method for   end-products

KS C IEC 60695-2-2017

着火危险试验.第2-12部分：基于灼热/热丝的试验方法.材料的灼热丝可燃性指数（GWFI）试验方法

Fire hazard testing — Part 2-12: Glowing/hot-wire based   test methods — Glow-wire flammability index(GWFI)   test method for materials

KS C IEC 60695-2-2017

着火危险试验.第2-13部分：基于灼热/热丝的试验方法.材料的灼热丝点火温度（GWIT）试验方法

Fire hazard testing — Part 2-13: Glowing/hot-wire based   test methods — Glow-wire ignition temperature(GWIT)   test method for materials

KS C IEC 60695-2-2004

着火危险试验第2-20部分：基于灼热/热丝的试验方法材料的热丝圈可燃性试验

Fire hazard testing－Part 2－20：Glowing/hot-wire based test methods－Hot-wire   coil ignitability test on materials