KS B ISO 11372-2005

溶解乙炔用钢瓶.充装时的检验

Cylinders for dissolved acetylene－Inspection at time of filling

KS B ISO 11374-2004

农业拖拉机和机具.四点刚性挂接装置技术规范

Agricultural tractors and implements－Four-point rigid hitch－Specifications

KS B ISO 11375-2014

建筑施工机械和设备.术语和定义

Building construction machinery and   equipment — Terms and definitions

KS B ISO 11381-2013

光学和光学仪器.眼科光学.螺纹

Optics and optical instruments ― ophthalmic optics ― screw threads

KS B ISO 11415-2012

冲压工具.成套模具

Tools for pressing－Die sets

KS B ISO 11419-2014

农业灌溉设备.浮子式空气释放阀

Agricultural irrigation equipment — Float type air release valvess

KS B ISO 11421-2001

光学和光学仪器.光学传递函数(OTF)测量的准确性

Optics and optical instruments－Accuracy of optical transfer   function(OTF) measurement

KS B ISO 1143-2003

金属.旋转棒弯曲疲劳试验

Metals－Rotating bar bending fatigue testing

KS B ISO 11439-2015

气瓶.车上贮存机动车用天然气燃料用高压气瓶

Gas cylinders — High pressure cylinders for the   on-board storage of natural gas as a fuel for automotive vehicles

KS B ISO 11471-2004

农业拖拉机和机械.遥控液压传动装置和控制装置的编码

Agricultural tractors and machinery－Coding of remote hydraulic power   services and controls

KS B ISO 11551-2015

光学和光学仪器.激光和激光设备.光学激光组件光吸收性试验方法

Optics and optical instruments ― Lasers and laser-related equipment ― Test method for absorptance of optical laser components

KS B ISO 11553-1-2015

机械安全激光加工机械第1部分：一般安全要求

Safety of machinery — Laser processing machines — Part 1: General safety requirements

KS B ISO 11553-2-2015

机械安全激光加工机械第2部分：手持激光加工设备的安全要求

Safety of machinery－Laser processing machines－Part 2：Safety requirements for hand-held   laser processing devices

KS B ISO 11553-2015

机械安全激光加工机械安全要求

Safety of machinery ― Laser processing machines ― Safety requirements

KS B ISO 11554-2015

光学和光学仪器.激光和相关激光设备.激光束功率、能量和时间特征的试验方法

Optics and optical instruments ― Laser and laser-related equipment ― Test methods for laser beam power, energy and temporal   characteristics

KS B ISO 11562-2004

产品几何量技术规范(GPS).表面结构:轮廓法.相位校正滤波器的计量特性

Geometrical Product Specifications(GPS)－Surface texture：Profile method－Metrological   characteristics of phase correct filters

KS B ISO 11602-1-2009

消防便携式和轮式灭火器第1部分：选择和安装

Fire protection－Portable and wheeled fire   extinguishers－Part 1：Selection   and installation

KS B ISO 11602-2-2009

消防便携式和轮式灭火器第2部分：检查和维护

Fire protection－Portable and wheeled fire   extinguishers－Part 2：Inspection   and maintenance

KS B ISO 11621-2005

气瓶.改装程序

Gas cylinders－Procedures for change of gas service

KS B ISO 11622-2006

气瓶.充气瓶条件

Gas cylinders－Conditions for filling gas cylinders

KS B ISO 11623-2008

可运输储气瓶.复合储气瓶的定期检测和测试

Transportable gas cylinders－Periodic inspection and testing of   composite gas cylinders

KS B ISO 11625-2008

气瓶.安全搬运

Gas cylinders－Safe handling

KS B ISO 11629-2017

起重机.起重机及其组件质量的测量

Cranes－Measurement of the mass of a crane and its components

KS B ISO 11655-2005

明渠水流测量.水文测验设备性能规定的方法

Measurement of liquid flow in open channels－Method of specifying performance of   hydrometric equipment

KS B ISO 11660-1-2016

起重机.走道、扶手和护栏.第1部分:总则

Cranes－Access, guards and restraints－Part 1：General

KS B ISO 11660-2-2002

起重机.走道、扶手和护栏.第2部分:移动式起重机

Cranes－Access, guards and restraints－Part 2：Mobile cranes

KS B ISO 11660-5-2003

起重机.走道、扶手和护栏.第5部分:桥式和门式起重机

Cranes－Access, guards and restraints－Part 5：Bridge and gantry crane

KS B ISO 11661-2018

移动式起重机.额定容量图表的表示

Mobile cranes — Presentation of rated capacity   charts

KS B ISO 11662-1-2015

移动式起重机.起重机性能的试验测定.第1部分：倾翻载荷和半径

Mobile cranes — Experimental determination of crane   performance — Part 1: Tipping loads and radii

KS B ISO 11670-2015

激光和激光设备.激光束参数的试验方法.束定位稳定性

Optics and optical instruments ― Laser and laser-related equipment ― Test methods for laser beam power, energy and temporal   characteristics

KS B ISO 11675-2013

纺织机械.平板针织机.词汇

Textile machinery and accessories - Flatbed   knitting machines - Vocabulary

KS B ISO 11676-2016

纺织机器及附件.经编机用链环.词汇及符号

Textile machinery and accessories — Pattern disks and pattern chains for   warp knitting machines — Vocabulary and symbols

KS B ISO 11681-1-2015

林业机械便携式链锯安全要求和试验第1部分：林业用链锯

Machinery for forestry — Portable chainsaw safety   requirements and testing — Part 1: Chain-saws for   forest service

KS B ISO 11681-2-2018

林业机械便携式链锯安全要求和试验第2部分：树木用链锯

Forestry machinery ― Portable chain-saw safety   requirements and testing ― Part 2: chain-saws for   tree service

KS B ISO 11684-2002

拖拉机、农林机械、动力草坪和园艺设备.安全标志和危险图示.通用规则

Tractors, machinery for agriculture and   forestry, powered lawnand garden equipment－Safety signs and hazard pictorials－General   principle

KS B ISO 11687-1-2007

滑动轴承座滑动轴承第1部分：垫块

Plain bearings－Pedestal plain bearings－Part 1：Pillow blocks

KS B ISO 11687-2-2007

滑动轴承座滑动轴承第2部分：侧法兰轴承

Plain bearings－Pedestal plain bearings－Part 2：Side flange bearings

KS B ISO 11687-3-2007

滑动轴承座滑动轴承第3部分：中心法兰轴承

Plain bearings－Pedestal plain bearings－Part 3：Centre flange bearings

KS B ISO 11689-2008

声学.机械设备释放燥声数据的比较方法

Acoustics－Procedure for the comparison of noise-emission data   for machinery and equipment

KS B ISO 11699-2-2001

无损检测工业射线照相胶片第2部分：用参考值控制胶片处理

Non-destructive testing－Industrial radiographic films－Part 2：Control of film processing by means   of reference values

KS B ISO 11727-2003

气压传动.控制阀和其他元件的气口控制机构的标识

Pneumatic fluid power－Identification of ports and   controlmechanisms of control valves and other components

KS B ISO 1174-1-2002

螺钉和螺母用装配工具传动方头第1部分：手动套筒工具传动方头

Assembly tools for screws and nuts－Driving squares－Part 1：Driving squares for hand socket   tools

KS B ISO 1174-2-2002

螺钉和螺母用装配工具传动方头第2部分：电动套筒工具传动方头

Assembly tools for screws and nuts－Driving squares－Part 2：Driving squares for power socket   tools

KS B ISO 11806-2-2017

农林机械便携式手持动力割灌机和割草机的安全要求和试验第2部分：背负式动力装置用机械

Agricultural and forestry machinery — Safety requirements and testing for   portable, hand-held, powered brush cutters and grass-trimmers — Part 2: Machines for use with back-pack power unit

KS B ISO 11900-1-2007

冲压工具球头锁紧凸模止动器第1部分：A、B型，轻型矩形和方形

Tools for pressing－Ball-lock punch retainers－Part 1：Types A and B, rectangular and   square for light duty

KS B ISO 11900-1-2004

冲压工具球锁冲头固定器

Tools for pressing－Ball-lock punch retainers

KS B ISO 11900-2-2012

冲压工具球头锁紧凸模止动器第2部分：轻载用C和D型

Tools for pressing－Ball-lock punch retainers－Part 2：Types C and D, reduced for light   duty

KS B ISO 11900-3-2015

冲压工具球头锁紧凸模止动器第3部分：E型，重型减径

Tools for pressing－Ball-lock punch retainers－Part 3：Type E, reduced for heavy duty

KS B ISO 11901-1-2012

冲压工具气体弹簧第1部分：通用技术条件

Tools for pressing－Gas springs－Part   1：General specifications

KS B ISO 11901-2-2012

冲压工具气体弹簧第2部分：附件规范

Tools for pressing－Gas springs－Part   2：Specification of accessories

KS B ISO 11903-2012

冲压工具.导柱装置

Tools for pressing－Guide pillar mountings

KS B ISO 11926-1-2003

通用和流体动力用连接.ISO 725螺纹和O形密封圈的油口和螺柱端头.第1部分：截断壳体内带O形密封圈的油口

Connections for general use and fluid power－Ports and stud ends with ISO 725   threads and O-ring sealing－Part 1：Ports with O-ring seal in truncated housing

KS B ISO 11926-2-2003

通用和流体动力连接用带ISO 725螺纹和O形密封圈的油口和螺柱端头第2部分：重型（S系列）螺柱端头

Connections for general use and fluid power－Ports and stud ends with ISO 725   threads and O-ring sealing－Part 2：Heavy-duty(S series) stud ends

KS B ISO 11926-3-2003

通用和流体动力用连接.带英制螺纹和O形密封圈的油口和螺柱端头.第3部分：轻型（L系列）螺柱端头

Connections for general use and fluid power－Ports and stud ends with inch threads   and O-ring sealing－Part 3：Light-duty(L   series) stud ends

KS B ISO 11943-2008

液压传动.在线液体自动颗粒计数系统.校准和验证的方法

Hydraulic fluid power－On-line automatic particle-counting   systems for liquids－Methods of calibration and   validation

KS B ISO 11990-2015

光学和光学仪器.激光和激光设备.气管柄激光抗性的测定

Optics and optical instruments ― Laser and laser-related equipment ― Determination of laser resistance of tracheal tube shafts

KS B ISO 11994-2017

起重机.可用性.词汇

Cranes－Availability－Vocabulary

KS B ISO 12003-1-2014

农林拖拉机窄轮距轮式拖拉机防翻滚保护装置第1部分：前置式防翻滚保护装置

Agricultural and forestry tractors — Roll-over protective structures on   narrow-track wheeled tractors — Part 1: Front-mounted   ROPS

KS B ISO 12003-2-2016

农林拖拉机窄轮距轮式拖拉机翻滚保护装置第2部分：后置式翻滚保护装置

Agricultural and forestry tractors－Roll-over protective structures on   narrow-track wheeled tractors－Part 2：Rear-mounted ROPS

KS B ISO 1-2017

产品几何量技术规范(GPS).产品几何量技术规范和检验的标准参考温度

Geometrical Product Specifications(GPS) — Standard reference temperature for   geometrical product specification and verification

KS B ISO 12043-2008

滚子轴承.单列角面接触的球轴承.平挡圈和无活塞胀圈槽之间的突缘的倒棱尺寸

Rolling bearings－Single-row cylindrical roller   bearings－Chamfer dimensions for loose rib and non-rib   sides

KS B ISO 12085-2014

产品几何量技术规范(GPS)表面结构:轮廓法.图形参数

Geometrical Product Specifications(GPS) — Surface texture: Profile method — Motif parameters

KS B ISO 12100-1-2003

机械性能基本概念、设计通则第1部分：基本术语、方法论

Sfety of machinery--Basic concepts, general   principles for design--Part 1 : Basic terminology, methodlogy

KS B ISO 12100-2-2003

机械安全基本概念、设计通则第2部分：技术原则

Safety of machinery－Basic concepts, general principles   for design－Part 2：Technical   principles

KS B ISO 12100-2016

机械安全.设计的一般原则.风险评估和风险降低

afety of machinery — General principles for design — Risk assessment and risk reduction

KS B ISO 12106-2004

金属材料.疲劳试验.轴向应变控制法

Metallic materials－Fatigue testing－Axial-strain-controlled method

KS B ISO 12107-2004

金属材料.疲劳试验.数据的统计规划和分析

Metallic materials－Fatigue testing－Statistical planning and analysis of data

KS B ISO 12108-2004

金属材料.疲劳试验.疲劳裂痕增长试验

Metallic materials－Fatigue testing－Fatigue crack growth method

KS B ISO 12117-2-2017

土方机械.挖掘机保护结构用实验室方法和性能要求.第2部分:大于6t的挖掘机用倾翻保护结构(ROPS)

Earth-moving machinery－Laboratory tests and performance   requirements for protective structures of excavators－Part   2：Roll-over protective structures(ROPS) for   excavators of over 6 t

KS B ISO 12123-2016

光学和光子学.未加工的光学玻璃规范

Raw optical glass in bulk and preshaped   forms－Bubblesand other   inclusions－Test method and classification

KS B ISO 12125-2008

带有米制细牙间距螺纹和法兰(非金属插入物)的经常作用扭矩型六角螺母.产品等级A和B

Prevailing torque type hexagon nuts with   flange (with non-metallic insert) with metric fine pitch thread－Product grades A and B

KS B ISO 12128-2017

滑动轴承.润滑油孔、油槽和油穴尺寸、类型、标记及其应用

Plain bearings — Lubrication holes, grooves and   pockets — Dimensions, types, designation and their   application to bearing bushes

KS B ISO 12129-1-2017

滑动轴承.第1部分：配合

Plain bearings — Part 1: Fits

KS B ISO 12151-1-2006

液压传动和通用连接软管接头第1部分：带ISO 8434－3 O形圈端面密封端的软管接头

Connections for hydraulic fluid power and   general use－Hose fittings－ Part 1：Hose fittings with ISO 8434－3 O-ring face seal ends

KS B ISO 12151-2-2006

液压传动和一般用途的连接软管接头第2部分：带K S B ISO 8434－1和K   S B ISO 8434－4的带O形圈的24°锥端软管接头

Connections for hydraulic fluid power and   general use－Hose fittings－Part 2：Hose fittings with KS B ISO 8434－1 and KS B ISO 8434－4 24° cone connector ends with O-rings

KS B ISO 12164-2-2005

带法兰接触面的空心锥形接口.第2部分：接收器.尺寸

Hollow taper interface with flange contact   surface－Part 2：Receivers－Dimensions

KS B ISO 12167-1-2015

滑动轴承.稳态条件下带排水槽的液体静压滑动轴颈轴承.第1部分：带排水槽的油润滑滑动轴颈轴承的计算

Plain bearings — Hydrostatic plain journal bearings   with drainage grooves under steady-state conditions —   Part 1: Calculation of oillubricated plain journal bearings with drainage   grooves

KS B ISO 12167-2-2015

滑动轴承.稳态条件下带排水槽的静液压滑动轴颈轴承.第2部分：带排水槽的油润滑滑动轴颈轴承计算的特征值

Plain bearings — Hydrostatic plain journal bearings   with drainage grooves under steady-state conditions —   Part 2: Characteristic values for the calculation of oil-lubricated plain   journal bearings with drainage grooves

KS B ISO 12168-1-2015

滑动轴承.稳态条件下无排水槽的液体静压滑动轴颈轴承.第1部分：无排水槽的油润滑滑动轴颈轴承的计算

Plain bearings — Hydrostatic plain journal bearings   without drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings   without drainage grooves

KS B ISO 1217-2002

容积式压缩机.验收试验

Displacement compressors－Acceptance tests

KS B ISO 12179-2014

产品几何量技术规范(GPS).表面结构:轮廓法接触(触针)式仪器的校准

Geometrical Product Specifications(GPS) — Surface texture: Profile method — Calibration of contact(stylus) instruments

KS B ISO 12180-1-2014

产品几何量技术规范（GPS）圆柱度第1部分：圆柱形的词汇和参数

Geometrical product specifications(GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form

KS B ISO 12180-2-2014

产品几何量技术规范（GPS）圆柱度第2部分：操作者规范

Geometrical product specifications(GPS) — Cylindricity — Part 2: Specification operators

KS B ISO 12181-1-2014

产品几何量技术规范（GPS）.圆度.第1部分：圆度的词汇和参数

Geometrical product specifications(GPS) — Roundness —   Part 1: Vocabulary and parameters of roundness

KS B ISO 12181-2-2014

产品几何量技术规范（GPS）.圆度.第2部分：操作者规范

Geometrical product specifications(GPS) — Roundness —   Part 2: Specification operators

KS B ISO 1219-2-2004

流体传动系统和元件.图形符号和回路图.第2部分:回路图

Fluid power systems and components－Graphic symbols andcircuit diagrams－Part 2：Circuit diagrams

KS B ISO 12209-3-2008

气瓶－压缩可呼吸空气用气瓶阀的出口连接－第3部分：230巴阀门的适配器

Gas cylinders－Outlet connections for gas cylinder valves for   compressed breathable air－Part 3：Adaptor for 230 bar valves

KS B ISO 12210-4-2004

起重机在用和停用状态下的锚定装置第4部分：动臂起重机

Cranes－Anchoring devices for in-service and out-of-service conditions－Part 4：Jib cranes

KS B ISO 12238-2005

气压传动.方向控制阀.移动时间的测量

Pneumatic fluid power－Directional control valves－Measurement of shifting time

KS B ISO 12240-1-2010

关节轴承.第1部分:径向球面滑动轴承

Spherical plain bearings－Part 1：Radial   spherical plain bearings

KS B ISO 1224-1-2009

滚动轴承仪表用精密轴承第1部分：公制系列轴承的外形尺寸、公差和特性

Rolling bearings－Instrument precision bearings－Part 1：Boundary dimensions, tolerances and   characteristics of metric series bearings

KS B ISO 1224-2-2009

滚动轴承仪表用精密轴承第2部分：英制轴承外形尺寸、公差和特性

Rolling bearings－Instrument precision bearings－Part 2：Boundary dimensions, tolerances and   characteristics of inch series bearings

KS B ISO 12302-2002

滑动轴承.质量特定.统计过程控制

Plain bearings－Quality characteristics－Statistical process control(SPC)

KS B ISO 12303-2002

滑动轴承.质量特性.机器和加工能力的计算

Plain bearings－Quality characteristics－Calculation of machine and process capabilities

KS B ISO 12306-2002

滑动轴承.薄壁轴瓦和薄壁轴套的壁厚测量

Plain bearings－Measurement of wall thickness ofthin－walled half－bearings and thin－walled bushes

KS B ISO 12374-2002

农业灌溉.电动或电控灌溉机械的设备和布线

Agricultural irrigation－Wiring and equipment for electrically   driven or controlled irrigation machines

KS B ISO 12391-1-2015

气瓶可重复充装的无缝钢管性能试验第1部分：原理、背景和结论

Gas cylinders－Refillable seamless steel－Performance   tests－Part 1：Philosophy,   background and conclusions

KS B ISO 12391-2-2015

气瓶可重复充装的无缝钢管性能试验第2部分：断裂性能试验单调爆破试验

Gas cylinders－Refillable seamless steel－Performance   tests－Part 2：Fracture   performance tests－Monotonic burst tests

KS B ISO 12391-3-2015

气瓶可重复充装的无缝钢管性能试验第3部分：断裂性能试验循环爆破试验

Gas cylinders－Refillable seamless steel－Performance   tests－ Part 3：Fracture   performance tests－Cyclical burst tests

KS B ISO 12478-1-2003

起重机维修手册第1部分：总则

Cranes－Maintenance manual－Part 1：General

KS B ISO 12480-3-2011

起重机安全使用第3部分：塔式起重机

Cranes－Safe use－Part 3：Tower   cranes

KS B ISO 12480-4-2011

起重机安全使用第4部分：动臂起重机

Cranes－Safe use－Part 4：Jib   cranes

KS B ISO 12482-1-2003

起重机状态监测第1部分：总则

Cranes－Condition monitoring－Part 1：General

KS B ISO 12488-1-2015

起重机.车轮、行走和横移轨道的公差.第1部分：总则

Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General

KS B ISO 12488-4-2012

起重机车轮、行走和横移轨道的公差第4部分：动臂起重机

Cranes－Tolerances for wheels and travel and traversing tracks－ Part 4：Jib cranes

KS B ISO 12499-2001

工业风机.风机的机械安全装置.护罩

Industrial fans－Mechanical safety of fans－Guarding

KS B ISO 12508-2014

土方机械.司机操作和维修空间.棱角倒钝

Earth-moving machinery — Operator station and maintenance   areas — Bluntness of edges

KS B ISO 12509-2012

土方机械.照明、信号和标志灯及反射镜装置

Earth-moving machinery－Lighting, signalling and marking   lights, and reflex-reflector devices

KS B ISO 12510-2015

土方机械.运行和维护.维修性指南

Earth-moving machinery — Operation and maintenance — Maintainability guidelines

KS B ISO 12706-2001

无损检测.术语.探伤检测术语

Non-destructive testing-Terminology－Terms used in penetrant testing

KS B ISO 12710-2005

无损检验.超声检测.评估超声试验仪器的电子特性

Non-destructive testing－Ultrasonic inspection－Evaluating electronic characteristics of ultrasonic test   instruments

KS B ISO 12713-2008

无损检测.声发射检查.传感器的初次校正

Non-destructive testing－Acoustic emission inspection－Primary calibration of transducers

KS B ISO 12714-2008

无损检测.声发射检查.声发射传感器的二级校准

Non-destructive testing－Acoustic emission inspection－Secondary calibration of acoustic emission sensors

KS B ISO 12715-2008

超声无损检测.接触式传感器光束轮廓特性的检测程序和基准块

Ultrasonic non-destructive testing－Reference blocks and test procedures   for the characterization of contact search unit beam profiles

KS B ISO 12721-2008

无损检测.热中子射线照相试验.中子束L/D比率的测定

Non-destructive testing－Thermal neutron radiographic testing－Determination of beam L/D ratio

KS B ISO 12737-2002

金属材料.平面变形断裂韧性的测定

Metallic materials－Determination of plane－strain fracture toughness

KS B ISO 12772-2006

实验室玻璃器皿.可处置微血球容量计毛细管

Laboratory glassware－Disposable microhaematocrit capillary   tubes

KS B ISO 12780-1-2014

产品几何量技术规范（GPS）.直线度.第1部分：直线度的词汇和参数

Geometrical product specifications(GPS) — Straightness — Part 1: Vocabulary and parameters of straightness

KS B ISO 12780-2-2014

产品几何量技术规范（GPS）——直线度——第2部分：操作员规范

Geometrical product specifications(GPS) ― Straightness — Part 2: Specification operators

KS B ISO 12781-2-2014

产品几何量技术规范（GPS）.平面度.第2部分：操作者规范

Geometrical product specifications(GPS) — Flatness —   Part 2: Specification operators

KS B ISO 12819-2005

电池驱动手表的电池寿命的评估方法

Methods of evaluation of the battery life   of a battery－powered watch

KS B ISO 128-34-2014

技术制图.画法的一般原则.第34部分：机械工程制图视图

Technical drawings — General principles of presentation — Part 34: Views on mechanical engineering drawings

KS B ISO 128-44-2014

技术制图.画法的一般原则.第44部分：机械工程制图部分

Technical drawings — General principles of presentation — Part 44: Sections on mechanical engineering drawings

KS B ISO 12844-2016

未加工的光学玻璃.金刚石薄片的可磨性.试验方法和分类

Raw optical glass－Grindability with diamond pellets－Test method and classification

KS B ISO 12853-2016

光学和光学仪器.显微镜.用户信息提供

Optics and optical instruments－Microscopes－Information   provided to the user

KS B ISO 12857-1-2002

光学和光学仪器大地测量仪器现场精度测定程序第1部分：水准仪

Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part   1：Levels

KS B ISO 12857-2-2002

光学和光学仪器大地测量仪器现场精度测定程序第2部分：经纬仪

Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part   2：Theodolites

KS B ISO 129-1

技术制图.尺寸及公差的表示.第1部分:一般原则

Technical drawings — Indication of dimensions and   tolerances — Part 1: General principles

KS B ISO 12912-2016

圆形针织机. 词汇

Circular knitting machines — Vocabulary

KS B ISO 13041-1-2016

数控车床和车削中心检验条件第1部分：卧式机床的几何检验

Test conditions for numerically controlled   turning machines and turning centres — Part 1: Geometric tests for machines with a horizontal   workholding spindle

KS B ISO 13041-2-2018

数控车床和车削中心检验条件第2部分：立式工件夹紧机床的几何检验

Test conditions for numerically controlled   turning machines and turning centres — Part 2: Geometric tests for machines with a vertical workholding   spindle

KS B ISO 13041-3-2018

数控车床和车削中心检验条件第3部分：倒立式工件夹紧机床的几何检验

Test conditions for numerically controlled   turning machines and turning centres — Part 3: Geometric tests for machines with inverted vertical   workholding spindles

KS B ISO 13041-4-2018

数控车床和车削中心检验条件第4部分：直线和旋转轴定位精度和重复性

Test conditions for numerically controlled   turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and   rotary axes

KS B ISO 13041-7-2018

数控车床和车削中心检验条件第7部分：坐标平面轮廓性能评定

Test conditions for numerically controlled   turning machines and turning centres — Part 7: Evaluation of contouring performance in the coordinate   planes

KS B ISO 13041-8-2018

数控车床和车削中心检验条件第8部分：热变形评定

Test conditions for numerically controlled   turning machines and turning centres — Part 8: Evaluation of thermal distortions

KS B ISO 13085-2017

石油和天然气工业. 油井油管用铝合金管

Petroleum and natural gas industries -   Aluminium alloy pipe for use as tubing for wells

KS B ISO 13090-1-2001

机械振动与冲击.人体全身振动环境的测量规范.人体全身振动暴露的舒适性降低界限和评价准则

Mechanical vibration and shock－Guidance on safety aspects of tests   and experiments with people－Part 1：Exposure to whole-body mechanical vibration and repeated shock

KS B ISO 13091-1-2013

机械振动神经功能障碍评定用振动感知阈值第1部分：指尖测量方法

Mechanical vibration－Vibrotactile perception thresholds   for the assessment of nerve dysfunction－Part 1：Methods of measurement at the fingertips

KS B ISO 13091-2-2014

机械振动.神经功能障碍评定用振动感知阈值.第2部分：指尖测量的分析和解释

Mechanical vibration — Vibrotactile perception thresholds   for the assessment of nerve dysfunction — Part 2:   Analysis and interpretation of measurements at the fingertips

KS B ISO 13200-2017

起重机.安全标志和危险图示.总则

Crances－Safety signs and hazard pictorials－General   principles

KS B ISO 13202-2015

起重机.速度和时间参数的测量

Cranes — Measurement of velocity and time parameters

KS B ISO 13212-2015

眼科光学.接触镜保护产品.储存寿命的测定指南

Ophthalmic optics－Contact lens care products－Guidelines for determination of shelf-life

KS B ISO 13253-2018

管道式空调器和热泵.性能试验和评价

Ducted air-conditioners and air-to-air heat   pumps — Testing and rating   for performance

KS B ISO 13256-1-2002

水源热泵性能试验和定额第1部分：水-空气和盐水-空气热泵

Water-source heat pumps－Testing and rating for performance－Part 1：Water-to-air and brine-to-air heat   pumps

KS B ISO 13261-1-2002

空调和空气源热泵设备的声功率额定值第1部分：无管道室外设备

Sound power rating of air-conditioning and   air-source heat pump equipment－Part 1：Non-ducted outdoor equipment

KS B ISO 13261-2-2002

空调和空气源热泵设备的声功率额定值第2部分：无管道室内设备

Sound power rating of air－conditioning and air－source heat pump equipment－Part 2：Non－ducted indoor equipment

KS B ISO 1328-2-2005

圆柱齿轮.ISO精度体系.第2部分：与径向综合偏差和跳动信息有关的偏差的定义和允许值

Cylindrical gears－ISO system of accuracy－Part 2：Definitions and allowable values of   deviations relevant to radial composite deviations and runout information

KS B ISO 13283-2004

工业自动化.严格时间通信授权.严格时间通信系统中的用户需求和网络管理

Industrial automation－Time-critical communications   architectures－User requirements and network   management for time-critical communications systems

KS B ISO 13284-2013

叉车.叉形臂扩展部分和能自由伸缩的叉形臂.技术特性和强度要求

Fork-lift trucks－Fork-arm extensions and telescopic   fork arms－Technical characteristics and strength   requirements

KS B ISO 13333-2012

土方机械.自卸车身及调整室的倾斜支撑装置

Earth-moving machinery－Dumper body support and operator's   cab tilt support devices

KS B ISO 13337-2008

弹簧型直销.轻型,有槽的

Spring-type straight pins－Slotted, light duty

KS B ISO 13338-2014

气体或气体混合物的腐蚀性测定

Determination of tissue corrosiveness of a   gas or gas mixture

KS B ISO 13341-2015

移动气瓶.气瓶阀的装配

Transportable gas cylinders－Fitting of valves to gas cylinders

KS B ISO 13347-1-2005

工业风扇标准实验室条件下风扇声功率级的测定第1部分：概述

Industrial fans－Determination of fan sound power   levels under standardized laboratory conditions－Part   1：General overview

KS B ISO 13347-2-2005

工业风扇标准实验室条件下风扇声功率级的测定第2部分：混响室法

Industrial fans－Determination of fan sound power   levels under standardized laboratory conditions－Part   2：Reverberant room method

KS B ISO 13351-2002

工业风机.尺寸

Industrial fans－Dimensions

KS B ISO 13359-2014

封闭管道中导电液体流量的测量.法兰电磁流量计.总长

Measurement of conductive liquid flow in   closed conduits —   Flanged electromagnetic flowmeters — Overall length

KS B ISO 13372-2015

机器的工况监测和诊断.词汇

Condition monitoring and diagnostics of   machines－Vocabulary

KS B ISO 13373-1-2004

机械状态监测与诊断振动状态监测第1部分：通用程序

Condition monitoring and diagnostics of   machines－Vibration condition   monitoring－Part 1：General   procedures

KS B ISO 13373-2-2017

机械状态监测和诊断振动状态监测第2部分：振动数据的处理、分析和表示

Condition monitoring and diagnostics of   machines —Vibration condition   monitoring — Part 2: Processing, analysis and   presentation of vibration data

KS B ISO 13379-2-2018

机器状态监测和诊断数据解释和诊断技术第2部分：数据驱动应用

Condition monitoring and diagnostics of   machines — Data interpretation   and diagnostics techniques — Part 2:Data-driven   applications

KS B ISO 13380-2004

机器的工况监控和诊断.性能参量应用的一般指南

Condition monitoring and diagnostics of   machines ― General guidelines on   using performance parameters

KS B ISO 13381-1-2016

机械的状态监视与诊断.预报.第1部分:通则

Condition monitoring and diagnostics of   machines－Prognostics－Part 1：General guidelines

KS B ISO 13385-1-2014

产品几何技术规范(GPS).尺寸测量设备.第1部分:卡尺.设计和计量特性

Geometrical product specifications(GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrological characteristics

KS B ISO 1340-2006

圆柱齿轮.向制造工业提供的买方要求的资料

Cylindrical gears－Information to be given to the   manufacturer by the purchaser in order to obtain the gear required

KS B ISO 1341-2006

直齿伞齿轮.向制造业提供的买方要求的资料

Straight bevel gears－Information to be given to the   manufacturer by the purchaser in order to obtain the gear required

KS B ISO 13457-2014

农业灌溉设备.水驱动的化学制剂喷射泵

Agricultural irrigation equipment — Water-driven chemical injector pumps

KS B ISO 13459-2012

土方机械.自卸车.教练员座椅/环境空间

Earth-moving machinery－Dumpers－Trainer   seat-enclosure

KS B ISO 13482-2014

机器人和机器人装置. 个人护理机器人的安全要求

Robots and robotic devices — Safety requirements for personal   care robots

KS B ISO 13503-3-2007

石油天然气工业完井液和材料第3部分：重盐水试验

Petroleum and natural gas industries－Completion fluids and materials－Part 3：Testing of heavy brines

KS B ISO 13535-2007

石油和天然气工业.钻孔和生产设备.提升设备

Petroleum and natural gas industries－Drilling and production equipment－Hoisting equipment

KS B ISO 13539-2014

土方机械.挖沟机.定义和商业规格

Earth-moving machinery — Trenchers —   Definitions and commercial specifications

KS B ISO 13562-1-2014

伸缩臂式工业车辆.第1部分:稳定性试验

Industrial variable-reach trucks — Part 1: Stability test

KS B ISO 13563-2-2008

单边负载叉车.第1部分:稳定性试验

Single side loading fork-lift trucks－Part 2：Additional   stability tests for trucks handling freight containers of 6 m length and   above

KS B ISO 13564-1-2015

动力工业卡车.能见度确认试验方法.第1部分:运载量小于等于10 t的坐驾和站驾式卡车和可变前移式叉车

Powered industrial trucks — Test methods for verification of   visibility — Part 1: Sit-on and stand-on operator   trucks and variable-reach trucks up to and including 10 t capacity

KS B ISO 13579-1-2016

工业炉及相关加工设备.测量能量平衡和计算效率的方法.第1部分:一般方法论  

Industrial furnaces and associated   processing equipment –   Method of measuring energy balance and calculating efficiency – Part 1: General methodology

KS B ISO 13579-2-2016

工业炉及相关加工设备.测量能量平衡和计算效率的方法.第2部分:钢铁用再热炉

Industrial furnaces and associated processing   equipment — Method of measuring   energy balance and calculating efficiency — Part 2:   Reheating furnaces for steel

KS B ISO 13579-3-2016

工业炉及相关加工设备.测量能量平衡和计算效率的方法.第3部分:间歇式铝熔化炉

Industrial furnaces and associated   processing equipment —   Method of measuring energy balance and calculating efficiency — Part 3: Batch-type aluminium melting furnaces

KS B ISO 13579-4-2016

工业炉及相关加工设备.测量能量平衡和计算效率的方法.第4部分:带防护或活性气氛炉

Industrial furnaces and associated   processing equipment —   Method of measuring energy balance and calculating efficiency — Part 4: Furnaces with protective or reactive atmosphere

KS B ISO 13584-1-2004

工业自动化系统与集成零件库第1部分：概述与基本原理

Industrial automation systems and integration－Parts library－Part 1：Overview and fundamental principles

KS B ISO 13584-101-2005

工业自动化系统与集成零件库第101部分：用参数程序实现几何视图交换协议

Industrial automation systems and   integration－Parts library－Part 101：Geometrical view exchange   protocol by parametric program

KS B ISO 13584-20-2002

工业自动化系统与集成零件库第20部分：逻辑资源：表达式的逻辑模型

Industrial automation systems and   integration－Parts library－Part 20：Logical resource：Logical model of expressions

KS B ISO 13584-24-2005

工业自动化系统与集成零件库第24部分：逻辑资源：供应商库的逻辑模型

Industrial automation systems and   integration－Parts library－Part 24：Logical resource：Logical model of supplier library

KS B ISO 13584-25-2006

工业自动化系统与集成零件库第25部分：逻辑资源：具有集合值和明确内容的供应商库的逻辑模型

Industrial automation systems and   integration－Parts library－Part 25：Logical resource：Logical model of supplier library with aggregate values and   explicit content

KS B ISO 13584-26-2004

工业自动化系统与集成零件库第26部分：逻辑资源：信息供应商标识

Industrial automation systems and   integration－Parts library－ Part 26：Logical resource：Information supplier identification

KS B ISO 13584-42-2004

工业自动化系统与集成零件库第42部分：描述方法：零件族结构的方法

Industrial automation systems and   integration－Parts library－Part 42：Description methodology： Methodology for structuring part families

KS B ISO 13584-501-2011

工业自动化系统与集成零件库第501部分：测量仪器参考字典登记规程

Industrial automation systems and   integration－Parts library－Part 501：Reference dictionary for   measuring instruments－Registration procedure

KS B ISO 13584-511-2011

工业自动化系统与集成零件库第511部分：通用机械系统与部件紧固件参考字典

Industrial automation systems and   integration－Parts library－Part 511：Mechanical systems and components   for general use－Reference dictionary for fasteners

KS B ISO 13588-2015

焊接的无损试验. 超声波检测.   自动相控阵技术的使用

Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology

KS B ISO 13653-2006

光学和光学仪器.普通光学试验方法.象场中有关光辉的测量

Optics and optical instruments－General optical test methods－Measurement of relative irradiance in the image field

KS B ISO 13696-2006

光学和光学仪器.用光学元件进行辐射散射的试验方法

Optics and optical instruments－Test methods for radiation scattered   by optical components

KS B ISO 13706-2009

石油和天然气工业.风冷热交换器

Petroleum and natural gas industries－Air cooled heat exchangers

KS B ISO 13710-2008

石油、石油化工和天然气工业.往复式容积泵

Petroleum, petrochemical and natural gas   industries－Reciprocating positive   displacement pumps

KS B ISO 13726-2004

液压传动.单杆缸、16MPa(160bar)缸径250mm～500mm的小型系列.附件安装尺寸

Hydraulic fluid power－Single rod cylinders, 16 MPa(160 bar)   compact series with bores from 250 mm to 500 mm－Accessory   mounting dimensions

KS B ISO 13753-2001-2016

机械振动与冲击.负荷下人体手.腕系对弹性物质传振动的测量与评价方法

Mechanical vibration and shock－Hand-arm vibration-Method for   measuring the vibration transmissibility of resilient materials when loaded   by the hand-arm system

KS B ISO 13766-2015

土方机械.电磁兼容性

Earth-moving machinery－Electromagnetic compatibility

KS B ISO 13769-2003

气瓶.印花标记

Gas cylinders－Stamp marking

KS B ISO 13770-2015

铝合金气瓶.避免瓶颈和瓶肩裂纹的操作要求

Aluminium alloy gas cylinders－Operational requirements for   avoidance of neck and shoulder cracks

KS B ISO 13772-2014

林业机械.便携式链锯.非手动链锯制动器的性能

Forestry machinery — Portable chain-saws — Non-manually actuated chain brake performance