电子电气类标准(十)
2019-07-23 20:43标准号 | 中文名称 | 英文名称 |
KS C IEC 61308-2012 | 高频电介质加热设备.测定输出功率的试验方法 | High-frequency dielectric heating installations-Test methods for the determination of power output |
KS C IEC 61309-2003 | 家用深油炸锅.性能测试方法 | Deep-fat fryers for househould use-Methods for measuring the performance |
KS C IEC 61310-1-2002 | 机械安全指示、标志和驱动第1部分:视觉、听觉和触觉信号要求 | Safety of machinery-Indication, marking and actuation-Part 1:Requirements for visual, auditory and tactile signals |
KS C IEC 61310-2-2002 | 机械安全指示、标志和操纵第2部分:标志要求 | Safety of machinery-Indication, marking and actuation-Part 2:Requirements for marking |
KS C IEC 61310-3-2004 | 机械安全指示、标志和操作第3部分:操作机构的位置和操作要求 | Safety of machinery-Indication, marking and actuation-Part 3:Requirements for the location and operation of actuators |
KS C IEC 61314-1-2008 | 纤维光学引出线第1-1部分:空白详细规范环境类别1、2、3、5和99 | Fibre optic fan-outs-Part 1-1:Blank detail specification-Environmental categories 1, 2, 3, 5 and 99 |
KS C IEC 61314-1-2008 | 光纤扇出器第1部分:总规范 | Fibre optic fan-outs-Part 1:Generic specification |
KS C IEC 61315-2014 | 光纤功率计的校准 | Calibration of fiber-optic power meters |
KS C IEC 61316-2002 | 工业电缆卷筒 | Industrial cable reels |
KS C IEC 61318-2017 | 带电作业.质量保证计划指南 | Live working — Conformity assessment applicable to tools, devices and equipment |
KS C IEC 61322-2012 | 辐射防护仪表.中子辐射能量到15MeV的固定式剂量当量率计,报警装置和监视器 | Radiation protection instrumentation-Installed dose equivalent rate meters, warning assemblies and monitors for neutron radiation of energy from thermal to 15 MeV |
KS C IEC 61325-2003 | 标称电压1000V以上的架空线用绝缘子.直流系统用陶瓷或玻璃绝缘子单元.定义、试验方法和验收准则 | Insulators for overhead lines with a nominal voltage above 1 000 V-Ceramic or glass insulator units for d.c. systems-Definitions, test methods and acceptance criteria |
KS C IEC 61326-1-2008 | 测量、控制和实验室用电气设备电磁兼容性要求第1部分:一般要求 | Electrical equipment for measurement, control and laboratory use-EMC requirements-Part 1:General requirements |
KS C IEC 61326-2-2008 | 测量、控制和实验室用电气设备电磁兼容要求第2-1部分:特殊要求电磁兼容非保护应用的敏感试验和测量设备的试验配置、工作条件和性能标准 | Electrical equipment for measurement, control and laboratory use-EMC requirements-Part 2-1:Particular requirements-Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
KS C IEC 61326-2-2014 | 测量、控制和实验室用电气设备电磁兼容性要求第2-3部分:特殊要求集成或远程信号调节传感器的试验配置、操作条件和性能标准 | Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-3: Particular requirements — Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
KS C IEC 61326-2-2014 | 测量、控制和实验室用电气设备.电磁兼容性要求.第2-4部分:特殊要求.根据IEC 61557-8的绝缘监测装置和根据IEC 61557-9的绝缘故障定位设备的试验配置、操作条件和性能标准 | Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-4: Particular requirements — Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
KS C IEC 61326-2-2014 | 测量、控制和实验室用电气设备.电磁兼容性要求.第2-5部分:特殊要求.根据IEC 61784-1、CP 3/2的接口的现场设备的试验配置、操作条件和性能标准 | Electrical equipment for measurement, control and laboratory use — EMC requirements — Part 2-5: Particular requirements — Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 |
KS C IEC 61331-1-2003 | 医用诊断X射线辐射防护装置第1部分:材料衰减性能的测定 | Protective devices against diagnostic medical X-radiation-Part 1:Determination of attenuation properties of materials |
KS C IEC 61331-2-2003 | 医用诊断X射线辐射防护装置第2部分:防护玻璃板 | Protective devices against diagnostic medical X-radiation-Part 2:Protective glass plates |
KS C IEC 61331-3-2003 | 医用诊断X射线辐射防护装置第3部分:性腺防护服和防护装置 | Protective devices against diagnostic medical X-radiation-Part 3:Protective clothing and protective devices for gonads |
KS C IEC 61332-2017 | 软磁铁氧体材料分类 | Soft ferrite material classification |
KS C IEC 61334-1-2016 | 采用配电线载波系统的配电自动化第1-1部分:一般考虑配电自动化系统结构 | Distribution automation using distribution line carrier systems-Part 1-1:General considerations-Distribution automation system architecture |
KS C IEC 61334-1-2016 | 采用配电线载波系统的配电自动化第1-2部分:一般考虑规范指南 | Distribution automation using distribution line carrier systems-Part 1-2:General considerations-Guide for specification |
KS C IEC 61334-1-2016 | 采用配电线载波系统的配电自动化第1-4部分:一般考虑中低压配电干线数据传输参数的识别 | Distribution automation using distribution line carrier systems- Part 1-4:General considerations-Identification of data transmission parameters concerning medium and low-voltagedistribution mains |
KS C IEC 61334-3-2010 | 采用配电线载波系统的配电自动化第3-1部分:干线信号要求频带和输出电平 | Distribution automation using distribution line carrier systems-Part 3-1:Mains signalling requirements-Frequency bands and output levels |
KS C IEC 61334-3-2010 | 采用配电线载波系统的配电自动化第3部分:干线信号要求第21节:中压相间隔离电容耦合装置 | Distribution automation using distribution line carrier systems-Part 3:Mains signalling requirements-Section 21:MV phase-to-phase isolated capacitive coupling device |
KS C IEC 61334-3-2016 | 采用配电线载波系统的配电自动化第3-22部分:干线信号要求mv相对地和屏对地侵入式耦合装置 | Distribution automation using distribution line carrier systems-Part 3-22:Mains signalling requirements-MV phase-to-earth and screen-to-earth intrusive coupling devices |
KS C IEC 61334-4-2016 | 采用配电线载波系统的配电自动化第4-1部分:数据通信协议通信系统的参考模型 | Distribution automation using distribution line carrier systems-Part 4-1:Data communication protocols-Reference model of the communication system |
KS C IEC 61334-4-2016 | 采用配电线载波系统的配电自动化第4-32部分:数据通信协议数据链路层逻辑链路控制(LLC) | Distribution automation using distribution line carrier systems-Part 4-32:Data communication protocols-Data link layer-Logical link control(LLC) |
KS C IEC 61334-4-2016 | 采用配电线载波系统的配电自动化第4-33部分:数据通信协议数据链路层面向连接的协议 | Distribution automation using distribution line carrier systems-Part 4-33:Data communication protocols-Data link layer-Connection oriented protocol |
KS C IEC 61334-4-2016 | 采用配电线载波系统的配电自动化第4-41部分:数据通信协议应用协议配电线报文规范 | Distribution automation using distribution line carrier systems-Part 4-41:Data communication protocols-Application protocols-Distribution line message specification |
KS C IEC 61334-4-2016 | 采用配电线载波系统的配电自动化第4-42部分:数据通信协议应用协议应用层 | Distribution automation using distribution line carrier systems-Part 4-42:Data communication protocols-Application protocol-Application layer |
KS C IEC 61334-4-2016 | 采用配电线载波系统的配电自动化第4-511部分:数据通信协议系统管理CIASE协议 | Distribution automation using distribution line carrier systems-Part 4-511:Data communication protocols-Systems management-CIASE protocol |
KS C IEC 61334-4-2016 | 采用配电线载波系统的配电自动化第4-512部分:数据通信协议61334-5-1轮廓的系统管理管理信息库(MIB) | Distribution automation using distribution line carrier systems-Part 4-512:Data communication protocols-System management using profile 61334-5-1-Management Information Base(MIB) |
KS C IEC 61334-4-2010 | 采用配电线载波系统的配电自动化第4-61部分:数据通信协议网络层无连接协议 | Distribution automation using distribution line carrier systems-Part 4-61:Data communication protocols-Network layer-Connectionless protocol |
KS C IEC 61334-5-2016 | 采用配电线载波系统的配电自动化第5-1部分:低层轮廓扩频键控(S-FSK)轮廓 | Distribution automation using distribution line carrier systems-Part 5-1:Lower layer profiles-The spread frequency shift keying(S-FSK) profile |
KS C IEC 61334-5-2016 | 采用配电线载波系统的配电自动化第5-2部分:低层文件集频移键控(FSK)文件集 | Distribution automation using distribution line carrier systems-Part 5-2:Lower layer profiles-Frequency shift keying(FSK) profile |
KS C IEC 61334-5-2010 | 采用配电线载波系统的配电自动化第5-3部分:低层轮廓扩频自适应宽带轮廓 | Distribution automation using distribution line carrier systems-Part 5-3:Lower-layer profiles-Spread spectrum adaptive wideband(SS-AW) profile |
KS C IEC 61334-5-2016 | 采用配电线载波系统的配电自动化第5-4部分:低层文件集多载波调制(MCM)文件集 | Distribution automation using distribution line carrier systems-Part 5-4:Lower layer profiles-Multi-carrier modulation(MCM) profile |
KS C IEC 61334-5-2016 | 采用配电线载波系统的配电自动化第5-5部分:低层轮廓扩频快速跳频(SS-FFH)轮廓 | Distribution automation using distribution line carrier systems-Part 5-5:Lower layer profiles-Spread spectrum-fast frequency hopping(SS-FFH) profile |
KS C IEC 61334-6-2016 | 采用配电线载波系统的配电自动化第6部分:A-xdr编码规则 | Distribution automation using distribution line carrier systems-Part 6:A-XDR encoding rule |
KS C IEC 61340-2-2007 | 静电学第2-1部分:测量方法材料和产品消散静电的能力 | Electrostatics-Part 2-1:Measurement methods-Ability of materials and products to dissipate static electric charge |
KS C IEC 61340-2-2014 | 静电学.第2-2部分:测量方法.充电能力的测量 | Electrostatics — Part 2-2: measurement methods — Measurement of chargeability |
KS C IEC 61340-2-2014 | 静电学第2-3部分:用于避免静电电荷积聚的固体刨床材料电阻和电阻率的试验方法 | Electrostatics-Part 2-3:Methods of test for determining the resistance and resistivity of solid planer materials used to avoid electrostatic charge accumulation |
KS C IEC 61340-3-2007 | 静电学第3-1部分:静电效应模拟方法人体模型成分测试 | Electrostatics-Part 3-1:Methods for simulation of electrostatic effects-Human body model(HBM)-Component testing |
KS C IEC 61340-3-2007 | 静电学-第3-2部分:静电效应模拟方法-机器模型(mm)-元件测试 | Electrostatics-Part 3-2:Methods for simulation of electrostatic effects-Machine model(MM)-Component testing |
KS C IEC 61340-4-2007 | 静电学第4部分:特殊应用的标准试验方法第1节:地板覆盖物和已安装地板的静电性能 | Electrostatics-Part 4:Standard test methods for specific application-Section 1:Electrostatic behaviour of floor coverings and installed floors |
KS C IEC 61340-4-2007 | 静电学第4-3部分:特殊应用的标准试验方法鞋 | Electrostatics-Part 4-3:Standard test methods for specific applications-Footwear |
KS C IEC 61340-4-2007 | 静电学第4-4部分:专用标准试验方法柔性中型散装容器(FIBC)的静电分类 | Electrostatics-Part 4-4:Standard test methods for specific applications-Electrostatic classification of flexible intermediate bulk containers(FIBC) |
KS C IEC 61340-4-2007 | 静电学第4-5部分:特殊用途的标准试验方法鞋靴和地板与人结合的静电防护特性的测定方法 | Electrostatics-Part 4-5:Standard test methods for specific applications-Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person |
KS C IEC 61340-5-2005 | 静电学第5-1部分:电子器件的静电防护一般要求 | Electrostatics-Part 5-1:Protection of electronic devices from electrostatic phenomena-General requirements |
KS C IEC 61340-5-2005 | 静电学第5-2部分:电子器件的静电防护用户指南 | Electrostatics-Part 5-2:Protection of electronic devices from electrostatic phenomena-User guide |
KS C IEC 61341-2014 | 反射灯的中心光束强度及光束角的测量方法 | Method of measurement of centre beam intensity and beam angle(s) of reflector lamps |
KS C IEC 61345-2002 | 光伏组件紫外试验 | UV test for photovoltaic(PV) modules |
KS C IEC 61347-1-2008 | 灯的控制装置第1部分:一般要求和安全要求 | Lamp controlgear-Part 1:General and safety requirements |
KS C IEC 61347-2-2014 | 灯的控制装置第2-10部分:冷启动管形放电灯(霓虹灯管)高频操作用电子逆变器和转换器的特殊要求 | Lamp controlgear ― Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps(neon tubes) |
KS C IEC 61347-2-2002 | 灯的控制装置.第2-11部分:与灯具一起使用的各种电子电路的特殊要求 | Lamp controlgear — Part 2-11 : Particular requirements for miscellaneous electronic circuits used with luminaires |
KS C IEC 61347-2-2002 | 灯的控制装置.第2-1部分:起动装置的特殊要求 | Lamp controlgear-Part 2 1:Particular requirements for starting devices(othar then glow starters) |
KS C IEC 61347-2-2014 | 灯的控制装置.第2-12部分:放电灯(荧光灯除外)用直流或交流电子镇流器的特殊要求 | Lamp controlgear — Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps(excluding fluorescent lamps) |
KS C IEC 61347-2-2018 | 灯的控制装置第2-13部分:LED模组用直流或交流电子控制装置的特殊要求 | Lamp controlgear-Part 2-13:Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
KS C IEC 61347-2-2002 | 灯的控制装置第2-2部分:白炽灯用直流或交流电子降压转换器的特殊要求 | Lamp controlgear-Part 2 2:Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
KS C IEC 61347-2-2014 | 灯的控制装置.第2-3部分:荧光灯用交流电子镇流器的特殊要求 | Lamp Controlgear — Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps |
KS C IEC 61347-2-2008 | 灯的控制装置第2-7部分:应急照明用直流电子镇流器的特殊要求 | Lamp controlgear-Part 2-7:Particular requirements for d.c. supplied electronic ballasts for emergency lighting |
KS C IEC 61347-2-2008 | 灯的控制装置.第2-8部分:荧光灯用镇流器的特殊要求 | Lamp controlgear-Part 2-8:Particular requirements for ballasts for fluorescent lamps |
KS C IEC 61347-2-2008 | 灯的控制装置.第2-9部分:放电灯(荧光灯除外)用镇流器的特殊要求 | Lamp controlgear-Part 2-9:Particular requirements for ballasts for discharge lamps(excluding fluorescent lamps) |
KS C IEC 61355-1-2017 | 设备、系统和设备文件的分类和命名第1部分:规则和分类表 | Classification and designation of documents for plants, systems and equipment ㅡ Part 1: Rules and classification tables |
KS C IEC 61360-1-2011 | 电气设备用带相关分类表的标准数据元素类型第1部分:定义原则和方法 | Standard data elements types with associated classification schemenfor electric items-Part 1:Definitions-Principles and methods |
KS C IEC 61360-2-2011 | 电气元器件标准数据元素类型及相关分类模式第2部分:快速字典模式 | Standard data element types with associated classification scheme for electric components-Part 2:EXPRESS dictionary schema |
KS C IEC 61362-2006 | 水轮机控制系统规范指南 | Guide to specification of hydraulic turbine control systems |
KS C IEC 61373-2002 | 铁路应用.机车车辆设备.冲击和振动试验 | Railway applications-Rolling stock equipment-Shock and vibration tests |
KS C IEC 61374-2005 | 牵引供电系统中的过电压 | Overvoltages in traction supply systems |
KS C IEC 61375-1-2015 | 电气化铁路设备列车总线第1部分:列车通信网络 | Electric railway equipment — Train bus — Part 1: Train communication network |
KS C IEC 61377-2-2005 | 铁路应用机车车辆综合试验第2部分:斩波供电直流牵引电动机及其控制 | Railway applications-Rolling stock-combined testing-Part 2:Chopper-fed direct current traction motors and their control |
KS C IEC 61377-2003 | 电力牵引机车车辆变频交流电动机综合试验及控制 | Electric traction-Rolling stock-Combined testing of inverter-fed alternating current motors and their control |
KS C IEC 61377-3-2003 | 铁路应用机车车辆第3部分:间接变流器供电的交流电动机及其控制系统的综合试验 | Railway applications-Rolling stock-Part 3:Combined testing of alternating current motors, fed by an indirect convertor, and their control system |
KS C IEC 61378-1-2013 | 变流变压器第1部分:工业用变压器 | Converter transformers-Part 1:Transformers for industrial applications |
KS C IEC 61378-2-2002 | 变流变压器第2部分:高压直流用变压器 | Convertor transformers-Part 2:Transformers for HVDC applications |
KS C IEC 61378-3-2014 | 变流变压器.第3部分:应用指南 | Converter transformers — Part 3: Application guide |
KS C IEC 61386-1-2014 | 电缆管理用导管系统.第1部分:一般要求 | Conduit systems for cable management — Part 1: General requirements |
KS C IEC 61386-21-2014 | 电缆管理用导管系统.第21部分:特殊要求.刚性导管系统 | Conduit systems for cable management — Part 21: Particular requirements — Rigid conduit systems |
KS C IEC 61386-22-2014 | 电缆管理用导管系统.第22部分:特殊要求.柔性导管系统 | Conduit systems for cable management — Part 22: Particular requirements — Pliable conduit systems |
KS C IEC 61386-23-2014 | 电缆管理用导管系统.第23部分:特殊要求.柔性导管系统 | Conduit systems for cable management — Part 23: Particular requirements — Flexible conduit systems |
KS C IEC 61386-24-2014 | 电缆管理用导管系统第24部分:特殊要求埋于地下的导管系统 | Conduit system for cable management — Part 24: Particular requirements — Conduit systems buried underground |
KS C IEC 61395-2014 | 架空导线绞合导线的蠕变试验程序 | Overhead electrical conductors — Creep test procedures for stranded conductors |
KS C IEC 61400-1-2015 | 风轮机第1部分:设计要求 | Wind turbines-Part 1:Design requirements |
KS C IEC 61400-11-2014 | 风力涡轮机.第11部分:噪声测量技术 | Wind turbines — Part 11: Acoustic noise measurement techniques |
KS C IEC 61400-12-2008 | 风力涡轮机第12-1部分:发电风力涡轮机的功率性能测量 | Wind turbines-Part 12-1:Power performance measurements of electricity producing wind turbines |
KS C IEC 61400-12-2015 | 风力涡轮机第12-2部分:基于短舱风速测量的发电风力涡轮机的功率性能 | Wind turbines ― Part 12-2: Power performance of electricity-producing wind turbines based on nacelle anemometry |
KS C IEC 61400-13-2007 | 风力发电机组第13部分:机械负荷的测量 | Wind turbine generator systems-Part 13:Measurement of mechanical loads |
KS C IEC 61400-14-2007 | 风轮机.第14部分:视在声功率级和音调值的说明 | Wind turbines-Part 14:Declaration of apparent sound power level and tonality values |
KS C IEC 61400-2-2014 | 风力涡轮机.第2部分:小型风力涡轮机 | Wind turbines — Part 2: Small wind turbines |
KS C IEC 61400-21-2013 | 风轮机第21部分:并网风轮机电能质量特性的测量和评定 | Wind turbines-Part 21:Measurement and assessment of power quality characteristics of grid connected wind turbines |
KS C IEC 61400-22-2013 | 风轮机第22部分:合格试验和认证 | Wind turbines-Part 22:Conformity testing and certification |
KS C IEC 61400-23-2015 | 风力涡轮机.第23部分:转子叶片的全尺寸结构试验 | Wind turbines — Part 23: Full-scale structural testing of rotor blades |
KS C IEC 61400-24-2014 | 风力涡轮机.第24部分:防雷 | Wind turbines — Part 24: Lightning protection |
KS C IEC 61400-25-2016 | 风力涡轮机第25-1部分:风力发电厂监测和控制用通信原理和模型的总体描述 | Wind turbines ― Part 25-1: Communications for monitoring and control of wind power plants ― Overall description of principles and models |
KS C IEC 61400-25-2018 | 风力涡轮机.第25-5部分:风力发电厂监测和控制用通信.一致性试验 | Wind turbines — Part 25-5: Communications for monitoring and control of wind power plants — Conformance testing |
KS C IEC 61400-25-2016 | 风力涡轮机第25-6部分:风力发电厂监测和控制用通信状态监测用逻辑节点类和数据类 | Wind turbines ― Part 25-6: Communications for monitoring and control of wind power plants ― Logical node classes and data classes for condition monitoring |
KS C IEC 61400-3-2013 | 风力涡轮机.第3部分:海上风力涡轮机的设计要求 | Wind turbines – Part 3: Design requirements for offshore wind turbines |
KS C IEC 61400-4-2014 | 风力涡轮机.第4部分:风力涡轮机齿轮箱的设计要求 | Wind turbines — Part 4: Design requirements for wind turbine gearboxes |
KS C IEC 61427-1-2016 | 可再生能源储存用二次电池和蓄电池组一般要求和试验方法第1部分:光伏离网应用 | Secondary cells and batteries for renewable energy storage ― General requirements and methods of test ― Part 1: Photovoltaic off-grid application |
KS C IEC 61429-2004 | 用ISO7000-1135国际重复循环符号的蓄电池和蓄电池组的标记 | Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 |
KS C IEC 61430-2003 | 蓄电池和蓄电池组.检查为减轻爆炸危险而设计的装置性能的试验方法.铅酸起动器蓄电池组 | Secondary cells and batteries-Test methods for checking the performance of devices designed for reducing explosion hazards-Lead-acid stater batteries |
KS C IEC 61431-2002 | 铅酸牵引蓄电池组的监控系统使用导则 | Guide for the use of monitor systems forlead-acid traction batteries |
KS C IEC 61434-2004 | 碱性或非酸性二次电池和电池组.碱性二次电池和电池组电流标识指南 | Secondary cells and batteries containing alkaline or other non-acid electrolytes-Guide to the designation of current in alkaline secondary cell and battery standards |
KS C IEC 61436-2006 | 密封式镍/金属氢化物(Ni/MH)单电池 | Sealed nickel-metal hydride rechargeable single cells |
KS C IEC 61438-2003 | 碱性二次电池和电池组潜在的安全问题和对健康危害.设备制造商和用户指南 | Possible safety and health hazards in the use of alkaline secondary cells and batteries-Guide to equipment manufacturers and users |
KS C IEC 61439-1-2014 | 低压开关设备和控制设备组件.第1部分:一般规则 | Low-voltage switchgear and controlgear assemblies — Part 1: General rules |
KS C IEC 61439-2-2014 | 低压开关设备和控制设备组件第2部分:电源开关设备和控制设备组件 | Low-voltage switagar and controlgear assemblies ― Part2: Power switchgear and controlgear assemblies |
KS C IEC 61439-5-2015 | 低压开关设备和控制设备组件第5部分:公用网络配电组件 | Low-voltage switchgear and controlgear assemblies — Part 5: Assemblies for power distribution in public networks |
KS C IEC 61442-2006 | 电缆额定电压6千伏(Um=7.2千伏)至30千伏(Um=36千伏)电力电缆附件试验方法 | Electric cables-Test methods for accessories for power cables with rated voltages from 6 kV(Um=7.2 kV) up to 30 kV(Um=36 kV) |
KS C IEC 61443-2014 | 额定电压30kV以上(Um=36kV)电缆的短路温度限值 | Short-circuit temperature limits of electric cables with rated voltages above 30 kV(Um=36 kV) |
KS C IEC 61452-2017 | 核仪器放射性核素γ射线发射率的测量锗分光光度计的校准和使用 | Nuclear instrumentation — Measurement of gamma-ray emission rates of radionuclides — Calibration and use of germanium spectrometers |
KS C IEC 61462-2018 | 复合空心绝缘子.额定电压大于1000V的电气设备用加压和非加压绝缘子.定义、试验方法、验收标准和设计建议 | Composite hollow insulators — Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V — Definitions, test methods, acceptance criteria and design recommendations |
KS C IEC 61466-1-2003 | 标称电压1000V以上架空线路用复合绝缘子串元件第1部分:标准强度等级和端部配件 | Composite string insulator units for overhead lines with a nominal voltage greater than 1000V-Part 1:Standard strength classes and end fittings |
KS C IEC 61466-2-2003 | 标称电压1000V以上架空线路用复合绝缘子串元件第2部分:尺寸和电气特性 | Composite string insulator units for overhead lines with a nominal voltage greater than 1000V-Part 2:Dimensional and electrical characteristics |
KS C IEC 61467-2014 | 架空线路用绝缘子.额定电压大于1000V线路用绝缘子串和绝缘子组.交流电弧试验 | Insulators for overhead lines — Insulator strings and sets for lines with a nominal voltage greater than 1 000 V — AC power arc tests |
KS C IEC 61468-2006 | 核电厂堆内仪表自力式中子探测器特性和试验方法 | Nuclear power plants-In-core instrumentation-Characteristics and test methods of self-powered neutron detectors |
KS C IEC 61472-2015 | 带电作业.电压范围为72.5kV至800kV的交流系统的最小安全距离.计算方法 | Live working — Minimum approach distances for A.C. systems in the voltage range 72.5 kV to 800 kV — A method of calculation |
KS C IEC 61477-2015 | 带电作业.使用工具、器件和设备的最低要求 | Live working — Minimum requirements for the utilization of tools, devices and equipment |
KS C IEC 61478-2017 | 带电作业.绝缘材料梯 | Live working-Ladders of insulating material |
KS C IEC 61479-2017 | 带电作业.绝缘材料制的软导体套(线性软管) | Live working — Flexible conductor covers(line hoses) of insulating material |
KS C IEC 61481-1-2016 | 带电作业.相位比较器.第1部分:交流电压超过1kV时使用的电容式比较器 | Live working — Phase comparators — Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
KS C IEC 61481-2-2016 | 带电作业.相位比较器.第2部分:1kV至36kV交流电压用电阻型 | Live working — Phase comparators — Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c. |
KS C IEC 61482-1-2014 | 带电作业.电弧热危害防护服.第1-1部分:试验方法.方法1:服装用阻燃材料的电弧等级(ATPV或EBT50)的测定 | Live working — Protective clothing against the thermal hazards of an electric arc — Part 1-1: Test methods — Method 1: Determination of the arc rating(ATPV or EBT50) of flame resistant materials for clothing |
KS C IEC 61482-1-2014 | 带电作业.防电弧热危害的防护服.第1-2部分:试验方法.方法2:用约束和定向电弧测定材料和服装的电弧防护等级(箱试验) | Live working — Protective clothing against the thermal hazards of an electric arc — Part 1-2: Test methods — Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc(box test) |
KS C IEC 61482-2-2014 | 带电作业.电弧热危害防护服.第2部分:要求 | Live working — Protective clothing against the thermal hazards of an electric arc — Part 2: Requirements |
KS C IEC 61496-1-2004 | 机械安全电敏防护设备第1部分:一般要求和试验 | Safety of machinery-Electro-sensitive protective equipment-Part 1:General requirements and tests |
KS C IEC 61497-2006 | 核电厂安全重要功能的电气联锁设计和实施建议 | Nuclear power plants-Electrical interlocks for functions important to safety-Recommendations for design and implementation |
KS C IEC 61499-4-2014 | 功能块.第4部分:一致性轮廓规则 | Function blocks — Part 4: Rules for compliance profiles |
KS C IEC 61500-2014 | 核电厂.安全重要仪表和控制系统.多道数据传送的功能要求 | Nuclear power plants — Instrumentation and control important to safety — Data communication in systems performing category A functions |
KS C IEC 61504-2012 | 核电厂安全重要的仪表和控制系统全厂辐射监测 | Nuclear power plants-Instrumentation and control systems important to safety-Plant-wide radiation monitoring |
KS C IEC 61508-0-2010 | 电气/电子/可编程电子安全相关系统的功能安全第0部分:功能安全和IEC 61508 | Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 0:Functional safety and IEC 61508 |
KS C IEC 61508-1-2015 | 电气/电子/可编程电子安全相关系统的功能安全第1部分:一般要求 | Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 1:General requirements |
KS C IEC 61508-2-2010 | 电气/电子/可编程电子安全相关系统的功能安全第2部分:电气/电子/可编程电子安全相关系统的要求 | Functional safety of electrical/elctronic/programmable electronic safety-related systems-Part 2:Requirements for electrical/electronic/programmable electronic safetly-related systems |
KS C IEC 61508-3-2010 | 电气/电子/可编程电子安全相关系统的功能安全第3部分:软件要求 | Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 3:Software requirements |
KS C IEC 61508-4-2010 | 电气/电子/可编程电子安全相关系统的功能安全第4部分:定义和缩略语 | Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 4:Definitions and abbreviations |
KS C IEC 61508-5-2010 | 电气/电子/可编程电子安全相关系统的功能安全第5部分:确定安全完整性等级的方法示例 | Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 5:Examples of methods for the determination of safety integrity levels |
KS C IEC 61508-6-2010 | 电气/电子/可编程电子安全相关系统的功能安全第6部分:IEC 61508-2和IEC 61508-3的应用指南 | Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 6:Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
KS C IEC 61508-7-2010 | 电气/电子/可编程电子安全相关系统的功能安全第7部分:技术和措施概述 | Functional safety of electrical/electronic/programmable electronic safety-related systems-Part 7:Overview of techniques and measures |
KS C IEC 61511-1-2002 | 过程工业部门的功能安全仪表系统第1部分:一般框架、定义、系统软件和硬件要求 | Functional safety instrumented systems for the process industry sector-Part 1:General framework, definitions system software and hardware requirements |
KS C IEC 61511-2-2002 | 过程工业部门的功能安全仪表系统第2部分:第1部分应用指南 | Functional safety instrumented systems for the process industry sector-Part 2:Guidelines in the application of part 1 |
KS C IEC 61511-3-2002 | 过程工业用功能安全仪表系统第3部分:危险和风险分析应用指南 | Functional safety instrumented systems for the process industry-Part 3:Guidelines in the application of hazard and risk analysis |
KS C IEC 61512-1-2014 | 批量控制.第1部分:模型和术语 | Batch control — Part 1: Models and terminology |
KS C IEC 61512-2-2014 | 批控制.第2部分:数据结构和语言指南 | Batch control — Part 2: Data structures and guidelines for languages |
KS C IEC 61513-2014 | 核电厂.对安全重要的仪表和控制.系统的一般要求 | Nuclear power plants — Instrumentation and control important to safety — General requirements for systems |
KS C IEC 61515-2003 | 矿物绝缘热电偶电缆和热电偶 | Mineral insulated thermocouple cables and thermocouples |
KS C IEC 61518-2014 | 413巴(41.3兆帕)以下的压差(类型)测量仪表和法兰式关闭装置之间的配合尺寸 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41.3 MPa) |
KS C IEC 61520-2014 | 温度传感器用金属温度计套管功能尺寸 | Metal thermowells for thermometer sensors ― Functional dimensions |
KS C IEC 61523-3-2015 | 延迟和功率计算标准第3部分:电子设计过程的标准延迟格式(SDF) | Delay and power calculation standards ― Part 3: Standard Delay Format (SDF) for the electronic design process |
KS C IEC 61526-2012 | 辐射防护仪表.X、γ和β射线辐射个人剂量等效Hp(10)和Hp(0.07)直读式个人剂量当量率和/或剂量当量率剂量计 | Radiation protection instrumentation-Measurement of personal dose equivalents Hp(10) and Hp(0.07) for X, gamma, neutron and beta radiations-Direct reading personal dose equivalent meters |
KS C IEC 61534-1-2014 | 电力轨道系统第1部分:一般要求 | Powertrack systems — Part 1: General requirements |
KS C IEC 61534-21-2014 | 电力轨道系统第21部分:墙壁和天花板安装用电力轨道系统的特殊要求 | Powertrack systems — Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting |
KS C IEC 61534-22-2014 | 电力轨道系统.第22部分:地板或地板下安装用电力轨道系统的特殊要求 | Powertrack systems — Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation |
KS C IEC 61537-A-2014 | 电缆管理-电缆槽系统和电缆梯架系统 | Cable management — Cable tray systems and cable ladder systems |
KS C IEC 61540-2014 | 电气附件.家用和类似用途的不带过电流保护的便携式剩余电流装置(PRCD) | Electrical accessories — Portable residual current devices without integral overcurrent protection for household and similar use(PRCDs) |
KS C IEC 61543-2014 | 家用和类似用途的剩余电流动作保护装置(RCD).电磁兼容性 | Residual current-operated protective devices(RCDs) for household and similar use — Electromagnetic compatibility |
KS C IEC 61545-2003 | 连接器件.任何材料的夹紧装置中的铝线和铝包夹紧装置中的铜线的连接器件 | Connecting devices-Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units |
KS C IEC 61549-A-2014 | 杂类灯 | Miscellaneous lamps |
KS C IEC 61554-2013 | 面板安装设备电气测量仪表面板安装尺寸 | Panel mounted equipment-Electrical measuring instruments-Dimensions for panel mounting |
KS C IEC 61557-1-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监控设备第1部分:一般要求 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 1:General requirements |
KS C IEC 61557-10-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监测设备第10部分:防护措施的试验、测量或监测用组合测量设备 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 10:Combined measuring equipment for testing, measuring or monitoring of protective measures |
KS C IEC 61557-11-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监控设备第11部分:TT、TN和IT系统中A、B型剩余电流监测器(RCMS)的有效性 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 11:Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems |
KS C IEC 61557-12-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监测设备第12部分:性能测量和监测装置(PMD) | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 12:Performance measuring and monitoring devices(PMD) |
KS C IEC 61557-2-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监控设备第2部分:绝缘电阻 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 2:Insulation resistance |
KS C IEC 61557-3-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监控设备第3部分:回路阻抗 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 3:Loop impedance |
KS C IEC 61557-4-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监控设备第4部分:接地电阻和等电位联结 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 4:Resistance of earth connection and equipotential bonding |
KS C IEC 61557-5-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监控设备第5部分:接地电阻 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 5:Resistance to earth |
KS C IEC 61557-6-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监控设备第6部分:TT、TN和IT系统中剩余电流装置(RCD)的有效性 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 6:Effectiveness of residual current devices(RCD) in TT, TN and IT systems |
KS C IEC 61557-7-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监控设备第7部分:相序 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 7:Phase sequence |
KS C IEC 61557-8-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监测设备第8部分:IT系统绝缘监测装置 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 8:Insulation monitoring devices for IT systems |
KS C IEC 61557-9-2013 | 交流1 000 V和直流1 500 V以下低压配电系统电气安全防护措施的试验、测量或监控设备第9部分:IT系统中绝缘故障定位设备 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 9:Equipment for insulation fault location in IT systems |
KS C IEC 61558-1-2017 | 电力变压器、电源装置及类似产品的安全第1部分:一般要求和试验 | Safety of power transformers, power supply units and similar-Part 1:General requirements and tests |
KS C IEC 61558-2-2017 | 电力变压器、电源装置及类似产品的安全第2部分:通用隔离变压器的特殊要求 | Safety of power transformers, power supply units and similar-Part 2:Particular requirements for separating transformers for general use |
KS C IEC 61558-2-2017 | 变压器、电抗器、电源装置及其组合的安全第2-12部分:控制电压变压器和恒压电源装置的特殊要求和试验 | Safety of Transforemers, Reactors, Power supply units and combination thereof — Part 2-12: Particular requirements and tests for control voltage transformers and power supply units for constant voltage |
KS C IEC 61558-2-2017 | 电力变压器、电源装置及类似设备的安全第2-13部分:通用自耦变压器的特殊要求 | Safety of power transformers, power supply units and similar devices-Part 2-13:Particular requirements for auto-transformers for general use |
KS C IEC 61558-2-2017 | 电力变压器、电源装置及类似产品的安全第2-15部分:医疗场所供电用隔离变压器的特殊要求 | Safety of power transformers, power supply units and similar-Part 2-15:Particular requirements for isolating transformers for the supply of medical locations |
KS C IEC 61558-2-2014 | 1100V以下电源电压的变压器、电抗器、电源装置和类似产品的安全第2-16部分:开关型电源装置和开关型电源装置用变压器的特殊要求和试验 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units |
KS C IEC 61558-2-2002 | 电力变压器、电源装置及类似产品的安全第2部分:开关电源变压器的特殊要求 | Safety of power transformers, power supply units and similar-Part 2:Particular requirements for transformers for switch mode power supplies |
KS C IEC 61558-2-2002 | 电力变压器、电源装置和类似设备的安全第2-19部分:扰动衰减变压器的特殊要求 | Safety of power transformers, power supply units and similar devices-Part 2-19:Particular requirements for perturbation attenuation transformers |
KS C IEC 61558-2-2017 | 电力变压器、电源装置和类似设备的安全第2-20部分:小型电抗器的特殊要求 | Safety of power transformers, power supply units and similar devices-Part 2-20:Particular requirements for small reactors |
KS C IEC 61558-2-2017 | 电力变压器、电源装置及类似设备的安全第2-2部分:控制变压器的特殊要求 | Safety of power transformers, power supply units and similar devices-Part 2-2:Particular requirements for control transformers |
KS C IEC 61558-2-2017 | 电力变压器、电源装置和类似设备的安全第2-23部分:建筑工地用变压器的特殊要求 | Safety of power transformers, power supply units and similar devices-Part 2-23:Particular requirements for transformers for construction sites |
KS C IEC 61558-2-2017 | 电力变压器、电源装置和类似设备的安全第2-3部分:燃气和燃油燃烧器用点火变压器的特殊要求 | Safety of power transformers, power supply units and similar devices-Part 2-3:Particular requirements for ignition transformers for gas and oil burners |
KS C IEC 61558-2-2017 | 电力变压器、电源装置和类似设备的安全第2部分:通用隔离变压器的特殊要求 | Safety of power transformers, power supply units and similar devices-Part 2:Particular requirements for isolating transformers for general use |
KS C IEC 61558-2-2017 | 电力变压器、电源装置和类似设备的安全第2-5部分:剃须刀变压器和剃须刀电源装置的特殊要求 | Safety of power transformers, power supply units and similar devices-Part 2-5:Particular requirements for shaver transformers and shaver supply units |
KS C IEC 61558-2-2017 | 电力变压器、电源装置和类似设备的安全第2部分:通用安全隔离变压器的特殊要求 | Safety of power transformers, power supply units and similar devices-Part 2:Particular requirements for safety isolating transformers for general use |
KS C IEC 61558-2-2017 | 电力变压器、电源装置和类似设备的安全第2部分:玩具用变压器的特殊要求 | Safety of power transformers, power supply units and similar devices-Part 2:Particular requirements for transformers for toys |
KS C IEC 61558-2-2017 | 电力变压器、电源装置和类似设备的安全第2-8部分:钟罩式和钟罩式变压器的特殊要求 | Safety of power transformers, power supply units and similar devices-Part 2-8:Particular requirements for bell and chime transformers |
KS C IEC 61558-2-2017 | 电力变压器、电源装置及类似产品的安全第2-9部分:钨丝灯用III级手提灯变压器的特殊要求 | Safety of power transformers, power supply units and similar products-Part 2-9:Particular requirements for transformers for class III handlamps for tungsten filament lamps |
KS C IEC 61559-1-2012 | 核设施辐射防护仪表辐射和(或)放射性水平连续监测集中系统第1部分:一般要求 | Radiation protection instrumentation in nuclear facilities-Centralized systems for continuous monitoring of radiation and/or levels of radioactivity-Part 1:General requirements |
KS C IEC 61562-2005 | 辐射防护仪器.测量粮食中β-辐射放射性核素的比活度用的便携设备 | Radiation protection instrumentation-Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs |
KS C IEC 61563-2009 | 辐射防护仪器食品中γ辐射放射性核素比活度测量设备 | Radiation protection instrumentation-Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs |
KS C IEC 61577-1-2012 | 辐射防护仪器氡和氡衰变产物测量仪器第1部分:总则 | Radiation protection instrumentation-Radon and radon decay product measuring instruments-Part 1:General principles |
KS C IEC 61577-2-2016 | 辐射防护仪器氡和氡衰变产物测量仪器第2部分:222RN和220RN测量仪器的特殊要求 | Radiation protection instrumentation — Radon and radon decay product measuring instruments — Part 2: Specific requirements for 222Rn and 220Rn measuring instruments |
KS C IEC 61577-3-2014 | 辐射防护仪器.氡和氡衰变产物测量仪器.第3部分:氡衰变产物测量仪器的特殊要求 | Radiation protection instrumentation — Radon and radon decay product measuring instruments — Part 3: Specific requirements for radon decay product measuring instruments |
KS C IEC 61577-4-2012 | 辐射防护仪器氡和氡衰变产物测量仪器第4部分:含氡同位素的参考大气及其衰变产物的生产设备(STAR) | Radiation protection instrumentation-Radon and radon decay product measuring instruments-Part 4:Equipment for the production of reference atmospheres containing radon isotopes and their decay products(STAR) |
KS C IEC 61580-1-2005 | 波导测量方法第1部分:偏振面退耦和旋转 | Methods of measurement for waveguides-Part 1:Decoupling and rotation of the plane of polarization |
KS C IEC 61580-2-2005 | 波导测量方法第2部分:互调产物电平 | Methods of measurement for waveguides-Part 2:Level of intermodulation products |
KS C IEC 61580-2005 | 波导和波导组件回波损耗的测量 | Measurement of return loss on waveguide and waveguide assemblies |
KS C IEC 61580-3-2005 | 波导测量方法第3部分:群延迟的变化 | Methods of measurement for waveguides-Part 3:Variation of group delay |
KS C IEC 61580-4-2008 | 波导测量方法第4部分:波导和波导组件的衰减 | Methods of measurement for waveguides-Part 4:Attenuation of waveguide and waveguide assemblies |
KS C IEC 61580-7-2008 | 波导测量方法第7部分:波导性能测定的图解法 | Methods of measurement for waveguides-Part 7:Graphical method for the determination of waveguide performance |
KS C IEC 61580-8-2014 | 波导测量方法第8部分:波导功率保持能力 | Methods of measurement for waveguides — Part 8: Waveguide power holding capability |
KS C IEC 61580-9-2005 | 波导测量方法第9部分:矩形波导界面反射系数 | Methods of measurement for waveguides-Part 9:Reflection coefficient at rectangular waveguide interfaces |
KS C IEC 61582-2012 | 辐射防护仪器体内计数器便携式、可运输和已安装设备的分类、一般要求和试验程序 | Radiation protection instrumentation-In vivo counters-Classification, general requirements and test procedures for portable, transportable and installed equipment |
KS C IEC 61591-2015 | 家用排油烟机.性能测试方法 | Household range hoods and other cooking fume extractors — Methods for measuring performance |
KS C IEC 61592-2005 | 家用电气设备.消费者评审检验指南 | Household electrical appliances-Guidelines for consumer panel testing |
KS C IEC 61595-3-2007 | 专业用多通道数字音频磁带录音机(DATR)盘对盘系统第3部分:16位媒体的24位操作 | Mutichannel digital audio tape recorder(DATR), reel-to-reel system, for professional use-Part 3:24-bit operation for 16-bit media |
KS C IEC 61596-2008 | 电感器和变压器用磁性氧化物极压铁心及有关零件尺寸 | Magnetic oxide EP-cores and associated parts for use in inductors and transformers-Dimensions |
KS C IEC 61602-2002 | 音频、视频和视听工程领域使用的连接器 | Connectors used in the field of audio, video and audiovisual engineering |
KS C IEC 61605-2018 | 电子和通信设备用固定电感器.标记代码 | Fixed inductors for use in electronic and telecommunication equipment — Marking codes |
KS C IEC 61606-1-2008 | 视听设备数字音频部分音频特性的基本测量方法第1部分:总则 | Audio and audiovisual equipment-Digital audio parts-Basic measurement methods of audio characteristics-Part 1:General |
KS C IEC 61606-2-2008 | 视听设备数字音频部分音频特性的基本测量方法第2部分:用户用 | Audio and audiovisual equipment-Digital audio parts-Basic measurement methods of audio characteristics-Part 2: Consumer use |
KS C IEC 61621-2014 | 干燥固体绝缘材料.耐高压低电流电弧放电试验 | Dry, solid insulating materials — Resistance test to high-voltage, low-current arc discharges |
KS C IEC 61628-1-2002 | 电工用瓦楞纸板和薄纸板第1部分:定义、名称与符号及一般要求 | Corrugated pressboard and presspaper for electrical purposes-Part 1:Definition, designations and general requirements |
KS C IEC 61628-2-2008 | 电工用瓦楞纸板和薄纸板第2部分:试验方法 | Corrugated pressboard and presspaper for electrical purposes-Part 2:Methods of test |
KS C IEC 61629-1-2014 | 电工用芳纶压纸板第1部分:定义、名称与符号及一般要求 | Aramid pressboard for electrical purposes — Part 1: Definitions, designations and general requirements |
KS C IEC 61629-2-2014 | 电工用芳纶压纸板第2部分:试验方法 | Aramid pressboard for electrical purposes — Part 2:Methods of tests |
KS C IEC 61631-2006 | 磁性氧化物芯的机械强度的试验方法 | Test method for the mechanical strength of cores made of magnetic oxides |
KS C IEC 61639-2014 | 额定电压72.5 kV及以上的电力变压器和气体绝缘金属封闭开关设备之间的直接连接 | Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
KS C IEC 61642-2003 | 受谐波影响的工业交流电网.滤波器和并联电容器的应用 | Industrial a.c. networks affected by harmonics-Application of filters and shunt capacitors |
KS C IEC 61643-11-2012 | 低压浪涌保护器第11部分:与低压电力系统连接的浪涌保护器要求和试验方法 | Low-voltage surge protective devices-Part 11:Surge protective devices connected to low-voltage power systems-Requirements and test methods |
KS C IEC 61643-12-2007 | 低压浪涌保护器第12部分:与低压配电系统连接的浪涌保护器选择和应用原则 | Low-voltage surge protective devices-Part 12:Surge protective devices connected to low-voltage power distribution systems-Selection and application principles |
KS C IEC 61643-21-2015 | 低压浪涌保护器.第21部分:与电信和信号网络连接的浪涌保护器.性能要求和试验方法 | Low voltage surge protective devices — Part 21: Surge protective devices connected to telecommunications and signalling networks — Performance requirements and testing methods |
KS C IEC 61643-22-2007 | 低压浪涌保护器第22部分:与电信和信号网络连接的浪涌保护器选择和应用原则 | Low-voltage surge protective devices-Part 22:Surge protective devices connected to telecommunications and signalling networks-Selection and application principles |
KS C IEC 61643-311-2015 | 低压浪涌保护器元件第311部分:气体放电管(GDT)的性能要求和试验电路 | Components for low-voltage surge protective devices — Part 311: Performance requirements and test circuits for gas discharge tubes(GDT) |
KS C IEC 61643-312-2016 | 低压浪涌保护器元件第312部分:气体放电管的选择和应用原则 | COMPONENTS FOR LOW–VOLTAGE SURGE PROTECTIVE DEVICES – Part 312: Selection and application principles for gas discharge tubes |
KS C IEC 61643-321-2006 | 低压浪涌保护器元件第321部分:雪崩击穿二极管(ABD)规范 | Components for low-voltage surge protective devices-Part 321:Specifications for avalanche breakdown diode(ABD) |
KS C IEC 61643-331-2006 | 低压浪涌保护器元件第331部分:金属氧化物压敏电阻器(MOV)规范 | Components for low-voltage surge protective devices-Part 331:Specification for metal oxide varistors(MOV) |
KS C IEC 61643-341-2005 | 低压浪涌保护器元件第341部分:晶闸管浪涌抑制器(TSS)规范 | Components for low-voltage surge protective devices-Part 341:Specification for thyristor surge suppressors(TSS) |
KS C IEC 61646-2010 | 地面用薄膜光伏组件设计鉴定和型式批准 | Thin-film terrestrial photovoltaic(PV) modules-Design qualification and type approval |
KS C IEC 61660-1-2014 | 发电厂和变电站直流辅助装置中的短路电流第1部分:短路电流的计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations — Part 1: Calculation of short-circuit currents |
KS C IEC 61660-2-2014 | 发电厂和变电站直流辅助装置中的短路电流第2部分:影响的计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations ― Part 2: Calculation of effects |
KS C IEC 61666-2011 | 工业系统、装置和设备及工业产品系统内终端的识别 | Industrial systems, installations and equipment and industrial products-Identification of terminals within a system |
KS C IEC 61669-2017 | 电声学助听器真耳声学性能特性的测量 | Electroacoustics — Measurement of real-ear acoustical performance characteristics of hearing aids |
KS C IEC 61672-1-2017 | 电声学声级计第1部分:规范 | Electroacoustics-Sound level meters-Part 1:Specifications |
KS C IEC 61672-2-2017 | 电声学声级计第2部分:模式评定试验 | Electroacoustics-Sound level meters-Part 2:Pattern evaluation tests |
KS C IEC 61672-3-2017 | 电声学声级计第3部分:周期试验 | Electroacoustics — Sound level meters — Part 3: Periodic tests |
KS C IEC 61674-2018 | 医用电气设备.X射线诊断成像用带电离室和/或半导体探测器的剂量仪 | Medical electrical equipment — Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
KS C IEC 61675-1-2017 | 放射性核素成像设备.特性和试验条件.第1部分:正电子发射断层摄影 | Radionuclide imaging devices — Characteristics and test conditions — Part 1: Positron emission tomographs |
KS C IEC 61675-2-2018 | 放射性核素成像设备.特性和试验条件.第2部分:平面、全身和SPECT成像用γ照相机 | Radionuclide imaging devices — Characteristics and test conditions — Part 2: Gamma cameras for planar, wholebody, and SPECT imaging |
KS C IEC 61676-2017 | 医用电气设备.放射诊断中X射线管电压无创测量用剂量测量仪器 | Medical electrical equipment — Dosimetric instruments used for noninvasive measurement of X-ray tube voltage in diagnostic radiology |
KS C IEC 61683-2005 | 光伏系统.功率调节器.效率测量程序 | Photovoltaic systems-Power conditioners-Procedure for measuring efficiency |
KS C IEC 61689-2005 | 超声学.理疗装置.0.5MHz~5MHz频率范围内的性能要求和测量方法 | Ultrasonics-Physiotherapy systems-Performance requirements and methods of measurement in the frequency range 0.5 MHz to 5 MHz |
KS C IEC 61691-1-2015 | 行为语言第1-1部分:VHDL语言参考手册 | Behavioural languages ― Part 1-1: VHDL Language Reference Manual |
KS C IEC 61691-6-2015 | 行为语言第6部分:VHDL模拟和混合信号扩展 | Behavioural languages ― Part 6: VHDL Analog and Mixed-Signal Extensions |
KS C IEC 61691-7-2015 | 行为语言第7部分:Systemc®语言参考手册 | BEHAVIOURAL LANGUAGES ― Part 7: SystemC® Language Reference Manual |
KS C IEC 61701-2014 | 光伏组件盐雾腐蚀试验 | Salt mist corrosion testing of photovoltaic(PV) modules |
KS C IEC 61724-2012 | 光伏系统性能监测.测量、数据交换和分析指南 | Photovoltaic system performance monitoring-Guidelines for measurement, data exchange and analysis |
KS C IEC 61725-2005 | 太阳辐照在一天中分布的分析表达式 | Analytical expression for daily solar profiles |
KS C IEC 61727-2005 | 太阳能光伏发电系统.交流系统连接特性 | Photovoltaic(PV) systems-Characteristics of the utility interface |
KS C IEC 61730-1-2014 | 光伏组件安全鉴定第1部分:结构要求 | Photovoltaic(PV) module safety qualification — Part 1: Requirements for construction |
KS C IEC 61730-2-2014 | 光伏组件安全鉴定第2部分:试验要求 | Photovoltaic(PV) module safety qualification — Part 2: Requirements for testing |
KS C IEC 61744-2007 | 纤维光学色散试验装置的校准 | Calibration of fibre optic chromatic dispersion test sets |
KS C IEC 61745-2001 | 光学纤维几何参数测量装置校准端面影像分析程序 | End-face image analysis procedure for the calibration of optical fibre geometry test setsthe calibration of optical fibre geometry test sets |
KS C IEC 61747-1-2003 | 液晶和固态显示器件第1部分:总规范 | Liquid crystal and solid-state display devices-Part 1:Generic specification |
KS C IEC 61747-2-2002 | 液晶和固态显示器件第2-1部分:无源矩阵单色液晶模块空白详细规范 | Liquid crystal and solid-state display devices-Part 2-1:Passive matrix monochrome LCD modules-Blank detail specification |
KS C IEC 61747-2-2002 | 液晶和固态显示器件第2部分:液晶显示模块分规范 | Liquid crystal and solid-state display devices-Part 2:Liquid crystal display modules-Sectional specification |
KS C IEC 61747-2-2005 | 液晶显示器件第2-2部分:矩阵彩色液晶模块空白详细规范 | Liquid crystal display devices-Part 2-2:Matrix colour LCD modules-Blank detail specification |
KS C IEC 61747-20-2015 | 液晶显示器件第20-3部分:目视检查单色液晶显示器件(不包括所有有源矩阵液晶显示器件) | LIQUID CRYSTAL DISPLAY DEVICES ― Part 20-3: Visual inspection ― Monochrome LCD display cells (excluding all active matrix liquid crystal cells) |
KS C IEC 61747-20-2015 | 液晶显示器件.第20-2部分:目视检验.单色LCD显示模块(不包括所有有源矩阵液晶模块) | LIQUID CRYSTAL DISPLAY DEVICES — Part 20-2 Visual inspection — Monochrome LCD display modules (excluding all active matrix liquid crystal modules) |
KS C IEC 61747-20-2015 | 液晶显示器件第20-3部分目视检查有源矩阵彩色液晶显示模块 | LIQUID CRYSTAL DISPLAY DEVICES ― Part 20-3 Visual inspection — Active matrix colour liquid crystal display modules |
KS C IEC 61747-3-2002 | 液晶和固态显示器件第3-1部分:液晶显示器(LCD)单元空白详细规范 | Liquid crystal and solid-state display devices - Part 3-1 : Liquid crystal display(LCD) cells - Blank detail specification |
KS C IEC 61747-3-2002 | 液晶和固态显示器件第3部分:液晶显示单元分规范 | Liquid crystal and solid state display devices-Part 3:Sectional specification of liquid crystal display (LCD) cells |
KS C IEC 61747-4-2002 | 液晶和固态显示器件第4部分:液晶显示模块和电池基本额定值和特性 | Liquid crystal and solid-state display devices-Part 4 : Liquid crystal display modules and cells-Essential ratings and characteristics |
KS C IEC 61747-5-2002 | 液晶和固态显示器件第5部分:环境、耐久性和机械试验方法 | Liquid crystal and solid-state display devices- Part 5 : Environmental, endurance and mechanical test methods |
KS C IEC 61747-5-2006 | 液晶显示器件第5-2部分:有源矩阵液晶显示模块的外观检查 | Liquid crystal display devices-Part 5-2:Visual inspection of active matrix liquid crystal display modules |
KS C IEC 61747-5-2007 | 液晶显示器件第5-3部分:玻璃强度和可靠性测量方法 | Liquid crystal display devices-Part 5-3:Glass strength and reliability measurement method |
KS C IEC 61747-6-2005 | 液晶显示器件第6部分:液晶模块测量方法透射式 | Liquid crystal display devices-Part 6:Measuring methods for liquid crystal modules-Transmissive type |
KS C IEC 61747-6-2006 | 液晶显示器件第6-2部分:液晶模块测量方法反射式 | Liquid crystal display devices-Part 6-2:Measuring methods for liquid crystal modules-Reflective type |
KS C IEC 61747-6-2006 | 液晶显示器件第6-3部分:有源矩阵液晶显示器件的运动伪影测量 | Liquid crystal display devices-Part 6-3:Motion artifact measurement of active matrix liquid crystal display modules |
KS C IEC 61751-2003 | 通信用激光模块.可靠性评定 | Laser modules used for telecommunication-Reliability assessment |
KS C IEC 61753-1-2007 | 纤维光学互连器件和无源元件性能标准第1-1部分:总则和指南互连器件(连接器) | Fibre optic interconnecting devices and passive components performance standard-Part 1-1:General and guidance-Interconnecting devices(connectors) |
KS C IEC 61753-2-2002 | 纤维光学互连器件和无源元件性能标准第2-1部分:U类单模光纤端接的纤维光学连接器非受控环境 | Fibre optic interconnecting devices and passive components performance standard-Part 2-1:Fibre optic connectors terminated on single-mode fiber for category U-Uncontrolled environment |
KS C IEC 61753-21-2005 | 纤维光学互连器件和无源元件性能标准第021-2部分:C类受控环境用单模光纤端接的纤维光学连接器 | Fibre optic interconnecting devices and passive component performance standard-Part 021-2:Fibre optic connectors terminated on single-mode fibre for category C- Controlled environment |
KS C IEC 61753-22-2005 | 纤维光学互连器件和无源元件性能标准第022-2部分:C类受控环境用多模光纤端接的纤维光学连接器 | Fibre optic interconnecting devices and passive components performance standard-Part 022-2:Fibre optic connectors terminated on multimode fibre for category C- Controlled environment |
KS C IEC 61753-51-2005 | 纤维光学互连器件和无源元件性能标准第051-3部分:U类单模纤维插入式固定衰减器非受控环境 | Fibre optic interconnecting devices and passive components performance standard-Part 051-3:Single-mode fibre, plug-style fixed attenuators for category U- Uncontrolled environment |
KS C IEC 61754-1-2002 | 纤维光学连接器接口第1部分:总则和指南 | Fiber optic connector interfaces-Part 1:General and guidance |
KS C IEC 61754-10-2008 | 纤维光学连接器接口第10部分:微型MPO型连接器门类 | Fiber optic connector interfaces-Part 10:Type Mini-MPO connector family |
KS C IEC 61754-12-2002 | 纤维光学连接器接口第12部分:FS型连接器门类 | Fiber optic connector interfaces-Part 12:Type FS connector family |
KS C IEC 61754-13-2008 | 纤维光学连接器接口第13部分:FC-PC型连接器门类 | Fiber optic connector interfaces-Part 13:Type FC-PC connector family |
KS C IEC 61754-15-2002 | 纤维光学连接器接口第15部分:LSH型连接器门类 | Fiber optic connector interfaces-Part 15:Type LSH connector family |
KS C IEC 61754-16-2002 | 纤维光学连接器接口第16部分:PN型连接器门类 | Fiber optic connector interfaces-Part 16:Type PN connector family |
KS C IEC 61754-18-2005 | 纤维光学连接器接口第18部分:MT-RJ型连接器门类 | Fibre optic connector interfaces-Part 18:Type MT-RJ connector family |
KS C IEC 61754-19-2002 | 纤维光学连接器接口第19部分:SG型连接器门类 | Fiber optic connector interfaces-Part 19:Type SG connector family |
KS C IEC 61754-2-2002 | 纤维光学连接器接口第2部分:BFOC/2、5型连接器门类 | Fiber optic connector interfaces-Part 2:Type BFOC/2, 5 connector family |
KS C IEC 61754-20-2005 | 纤维光学连接器接口第20部分:LC型连接器门类 | Fibre optic connector interfaces-Part 20:Type LC connector family |
KS C IEC 61754-3-2002 | 纤维光学连接器接口第3部分:LSA型连接器门类 | Fiber optic connector interfaces-Part 3:Type LSA connector family |
KS C IEC 61754-4-2005 | 纤维光学连接器接口第4-1部分:SC型连接器门类简化插座SC-PC连接器接口 | Fibre optic connector interfaces-Part 4-1:Type SC connector family-Simplified receptacle SC-PC connector interfaces |
KS C IEC 61754-4-2002 | 纤维光学连接器接口第4部分:SC型连接器门类 | Fiber optic connector interfaces-Part 4:Type SC connector family |
KS C IEC 61754-5-2008 | 纤维光学连接器接口第5部分:MT型连接器门类 | Fiber optic connector interfaces-Part 5:Type MT connector family |
KS C IEC 61754-7-2005 | 纤维光学连接器接口第7部分:MPO型连接器门类 | Fibre optic connector interfaces-Part 7:Type MPO connector family |
KS C IEC 61754-8-2002 | 纤维光学连接器接口第8部分:CF08型连接器门类 | Fiber optic connector interfaces-Part 8:Type CF08 connector family |
KS C IEC 61754-9-2002 | 纤维光学连接器接口第9部分:DS型连接器门类 | Fiber optic connector interfaces-Part 9:Type DS connector family |
KS C IEC 61757-1-2003 | 光纤传感器第1部分:总规范 | Fiber optics sensors - Part 1:Generic specification |
KS C IEC 61757-2-2018 | 纤维光学传感器.第2-2部分:温度测量.分布式传感 | Fibre optic sensors — Part 2-2: Temperature measurement — Distributed sensing |
KS C IEC 61760-1-2007 | 表面安装技术第1部分:表面安装元件规范的标准方法 | Surface mounting technology-Part 1:Standard method for the specification of surface mounting components(SMDs) |
KS C IEC 61760-2-2009 | 表面安装技术第2部分:表面安装装置(SMD)的运输和贮存条件应用指南 | Surface mounting technology-Part 2:Transportation and storage conditions of surface mounting devices(SMD)-Application guide |
KS C IEC 61770-2015 | 与总水管连接的电器.避免软管组件的反虹吸和故障 | Electric appliances connected to the water mains — Avoidance of backsiphonage and failure of hose-sets |