电子电气类标准(八)
2019-07-23 20:43标准号 | 中文名称 | 英文名称 |
KS C IEC 60838-2-2015 | 杂类灯座.第2-2部分:特殊要求.LED模块用连接器 | Miscellaneous lampholders — Part 2-2: Particular requirements — Connectors for LED-modules |
KS C IEC 60839-10-2007 | 报警系统 第10部分:道路车辆用报警系统 第1节:客车 | Alarm systems-Part 10 : Alarm systems for road vehicles-Section 1:Passenger cars |
KS C IEC 60839-5-2007 | 报警系统.第5部分:报警传输系统的要求.第1节:系统的通用要求 | Alarm systems-Part 5:Requirement for alarm transmission systems-Section 1:General requirements for systems |
KS C IEC 60839-5-2007 | 报警系统.第5部分:报警传输系统的要求.第2节:设备的通用要求 | Alarm systems-Part 5:Requirement for alarm transmission systems-Section 2:General requirements for equipment |
KS C IEC 60840-2006 | 额定电压为30kV(Um=36kV)以上至150kV(Um=170kV)以下的挤压绝缘的动力电缆试验.试验方法和要求 | Power cables with extruded insulation and their accessories for rated voltages above 30 kV(Um=36 kV) up to 150 kV(Um=170 kV)-Test methods and requirements |
KS C IEC 60843-3-2005 | 使用8mm磁带的螺旋扫描盒式磁带录像系统.8mm录像机.第3部分:Hi8的高频规范 | Helical-scan video tape cassette system using 8 mm magnetic tape-8 mm Video-Part 3:High-band specification for Hi 8 |
KS C IEC 60846-1-2014 | 辐射防护仪器.β、X和γ射线用环境和/或定向剂量当量(率)表和/或监控器.第1部分:便携工作场所和环境表及监控器 | Radiation protection instrumentation — Ambient and/or directional dose equivalent(rate) meters and/or monitors for beta, X and gamma radiation — Part 1: Portable workplace and environmental meters and monitors |
KS C IEC 60846-2-2014 | 辐射防护仪表.β,X和γ辐射周围和/或定向剂量当量(率)仪和/或监测仪.第2部分:紧急情况放射线防护目的用的便携式高射程β,光子剂量 | Radiation protection instrumentation — Ambient and/or directional dose equivalent(rate) meters and/or monitors for beta, X and gamma radiation — Part 2: High range beta and photon dose and dose rate portable instruments for emergency radiation protection purposes |
KS C IEC 60848-2016 | 控制系统用功能图表制作 | Preparation of function charts for control systems |
KS C IEC 60849-2002 | 应急用声系统 | Sound systems for emergency purposes |
KS C IEC 60850-2002 | 铁路应用.牵引系统的供电电压 | Railway applications-Supply voltages of traction systems |
KS C IEC 60851-1-2015 | 绕组线试验方法第1部分:总则 | Winding wires — Test methods — Part 1: General |
KS C IEC 60851-2-2015 | 绕组线试验方法第2部分:尺寸的测定 | Winding wires — Test methods — Part 2: Determination of dimensions |
KS C IEC 60851-3-2003 | 绕组线试验方法第3部分:机械性能 | Winding wires-Test methods-Part 3:Mechanical properties |
KS C IEC 60851-4-2003 | 绕组线试验方法第4部分:化学性能 | Winding wires-Test methods-Part 4:Chemical properties |
KS C IEC 60851-5-2015 | 绕组线试验方法第5部分:电性能 | Winding wires — Test methods — Part 5:Electrical properties |
KS C IEC 60851-6-2003 | 绕组线试验方法第6部分:热性能 | Winding wires-Test methods-Part 6:Thermal properties |
KS C IEC 60853-1-2003 | 电缆周期和应急电流定额的计算第1部分:18/30(36)kV及以下电缆的周期定额系数 | Calculation of cyclic and emergency current rating of cables-Part 1:Cyclic rating factor for cables up to and including 18/30(36) kV |
KS C IEC 60853-2-2003 | 电缆周期和应急电流定额的计算第2部分:18/30(36)kV以上电缆的周期定额和全电压电缆的应急定额 | Calculation of cyclic and emergency current rating of cables-Part 2:Cyclic rating of cables greater than 18/30(36) kV and emergency ratings for cables of all voltages |
KS C IEC 60853-3-2014 | 电缆周期和紧急电流定额的计算.第3部分:土壤局部干燥的全电压电缆周期定额系数 | Calculation of the cyclic and emergency current rating of cables — Part 3: Cyclic rating factor for cables of all voltages, with partial drying of the soil |
KS C IEC 60855-1-2014 | 带电作业.绝缘泡沫填充管和实心棒.第1部分:圆形截面的Tubes和棒 | Live working — Insulating foam-filled tubes and solid rods — Part 1: Tubes and rods of a circular cross-section |
KS C IEC 60861-2012 | 放射线防护测量装置.液体流出物及地表水的放射性核种监测装备 | Equipment for monitoring of radionuclides in liquid effluents and surface waters |
KS C IEC 60862-1-2007 | 经质量评定的声表面波(SAW)滤波器第1部分:总规范 | Surface acoustic wave(SAW) filters of assessed quality-Part 1:Generic specification |
KS C IEC 60862-2-2007 | 经质量评定的声表面波(SAW)滤波器第2部分:使用指南 | Surface acoustic wave(SAW) filters of assessed quality-Part 2:Guidance on use |
KS C IEC 60862-3-2011 | 经质量评定的声表面波(SAW)滤波器第3部分:标准外形 | Surface acoustic wave(SAW) filters of assessed quality-Part 3:Standard outlines |
KS C IEC 60870-1-2007 | 远动设备和系统第1部分:一般考虑第一节:一般原则 | Telecontrol equipment and systems-Part 1:General considerations-Section one:General principles |
KS C IEC 60870-1-2003 | 远动设备和系统第1部分:一般考虑第2节:规范指南 | Telecontrol equipment and systems-Part 1:General considerations-Section 2:Guide for specifications |
KS C IEC 60870-1-2007 | 远动设备和系统第1部分:一般考虑第3节:术语表 | Telecontrol equipment and systems-Part 1:General considerations-Section 3:Glossary |
KS C IEC 60870-1-2007 | 远动设备和系统第1部分:一般考虑第4节:远动数据传输的基本方面和标准IEC 60870-5和IEC 60870-6的组织 | Telecontrol equipment and systems-Part 1:General considerations-Section 4:Basic aspects of telecontrol data transmission and organization of standards IEC 60870-5 and IEC 60870-6 |
KS C IEC 60870-1-2007 | 远动设备和系统第1-5部分:一般考虑带扰频器的现代传输程序对使用IEC 60870-5协议的传输系统数据完整性的影响 | Telecontrol equipment and systems-Part 1-5:General considerations-Influence of modern transmission procedures with scramblers on the data integrity of transmission systems using the protocol IEC 60870-5 |
KS C IEC 60870-2-2003 | 远动设备和系统第2部分:工作条件第1节:电源和电磁兼容性 | Telecontrol equipment and systems-Part 2:Operating conditions-Section 1:Power supply and electromagnetic compatibility |
KS C IEC 60870-2-2003 | 远动设备和系统第2部分:工作条件第2节:环境条件(气候、机械和其他非电气影响) | Telecontrol equipment and systems-Part 2:Operating conditions-Section 2:Environmental conditions(climatic, mechanical and other non-electrical influences) |
KS C IEC 60870-3-2003 | 远动设备和系统第3部分:接口(电气特性) | Telecontrol equipment and systems-Part 3:Interfaces (electrical characteristics) |
KS C IEC 60870-4-2003 | 远动设备和系统第4部分:性能要求 | Telecontrol equipment and systems-Part 4:Performance requirements |
KS C IEC 60870-5-2016 | 远动设备和系统第5部分:传输规约第101节:基本远动任务的伴随标准 | Telecontrol equipment and systems-Part 5:Transmission protocols-Section 101:Companion standard for basic telecontrol tasks |
KS C IEC 60870-5-2014 | 远动设备和系统.第5部分:传输规约.第102节:电力系统中综合总量传输的配套标准 | Telecontrol equipment and systems — Part 5: Transmission protocols — Section 102: Companion standard for the transmission of integrated totals in electric power systems |
KS C IEC 60870-5-2014 | 远动设备和系统.第5-103部分:传输协议.保护设备信息接口的配套标准 | Telecontrol equipment and systems — Part 5-103: Transmission protocols — Companion standard for the informative interface of protection equipment |
KS C IEC 60870-5-2007 | 远动设备和系统第5-104部分:传输规约用标准传输规约进行KS C IEC 60870-5-101的网络访问 | Telecontrol equipment and systems-Part 5-104:Transmission protocols-Network access for KS C IEC 60870-5-101 using standard transport profiles |
KS C IEC 60870-5-2003 | 远动设备和系统第5部分:传输规约第1节:传输帧格式 | Telecontrol equipment and systems-Part 5:Transmission protocols-Section 1:Transmission frame formats |
KS C IEC 60870-5-2003 | 远动设备和系统第5部分:传输规约第2节:链路传输规程 | Telecontrol equipment and systems-Part 5:Transmission protocols-Section 2:Link transmission procedures |
KS C IEC 60870-5-2003 | 远动设备和系统第5部分:传输规约第3节:应用数据的一般结构 | Telecontrol equipment and systems-Part 5:Transmission protocols-Section 3:General structure of application data |
KS C IEC 60870-5-2003 | 远动设备和系统第5部分:传输规约第4节:应用信息元的定义和编码 | Telecontrol equipment and systems-Part 5:Transmission protocols-Section 4:Definition and coding of application information elements |
KS C IEC 60870-5-2003 | 远动设备和系统第5部分:传输规约第5节:基本应用功能 | Telecontrol equipment and systems-Part 5:Transmission protocols-Section 5:Basic application functions |
KS C IEC 60870-5-2014 | 远动设备和系统.第5-601部分:KS C IEC 60870-5-101配套标准的一致性试验箱 | Telecontrol equipment and systems — Part 5-601: Conformance test cases for the KS C IEC 60870-5-101 companion standard |
KS C IEC 60870-5-2007 | 远动设备和系统第5-6部分:IEC 60870-5配套标准一致性试验指南 | Telecontrol equipment and systems-Part 5-6:Guidelines for conformance testing for the IEC 60870-5 companion standards |
KS C IEC 60870-6-2007 | 远动设备和系统第6部分:与ISO标准和ITU-T建议兼容的远动规约第1节:标准的应用背景和组织 | Telecontrol equipment and systems-Part 6:Telecontrol protocols compatible with ISO standards and ITU-T recommendations-Section 1:Application context and organization of standards |
KS C IEC 60870-6-2014 | 远动设备和系统第6部分:与ISO标准和ITU-T建议兼容的远动协议第2节:基本标准的使用(OSI第1~4层) | Telecontrol equipment and systems — Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations — Section 2: Use of basic standards(OSI layers 1∼4) |
KS C IEC 60870-6-2014 | 远动设备和系统第6部分:与ISO标准和ITU-T建议兼容的远动协议第501节:TASE.1服务定义 | Telecontrol equipment and systems — Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations — Section 501: TASE.1 Service definitions |
KS C IEC 60870-6-2014 | 远动设备和系统第6部分:与ISO标准和ITU-T建议兼容的远动协议第502节:TASE.1协议定义 | Telecontrol equipment and systems — Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations — Section 502: TASE.1 Protocol definitions |
KS C IEC 60870-6-2014 | 远动设备和系统.第6-503部分:与ISO标准和ITU-T建议兼容的远动协议.TASE.2服务和协议 | Telecontrol equipment and systems — Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations — TASE.2 Services and protocol |
KS C IEC 60870-6-2014 | 远动设备和系统第6-504部分:与ISO标准和ITU-T建议兼容的远动协议TASE.1用户约定 | Telecontrol equipment and systems — Part 6-504: Telecontrol protocols compatible with ISO standards and ITU-T recommendations — TASE .1 user conventions |
KS C IEC 60870-6-2007 | 远动设备和系统第6-505部分:与ISO标准和ITU-T建议兼容的远动协议ASE.2用户指南 | Telecontrol equipment and systems-Part 6-505:Telecontrol protocols compatible with ISO standards and ITU-T recommendations-ASE.2 User guide |
KS C IEC 60870-6-2007 | 远动设备和系统第6部分:与ISO标准和ITU-T建议兼容的远动规约第601节:在通过永久访问分组交换数据网络而连接的终端系统中提供面向连接的传输服务的功能描述 | Telecontrol equipment and systems-Part 6:Telecontrol protocols compatible with ISO standards and ITU-T recommendations-Section 601:Functional Profile for providing the Connection-Oriented Transport Service in an End System connected via permanent access to a Packet Switched Data Network |
KS C IEC 60870-6-2007 | 远动设备和系统第6-602部分:与ISO标准和ITU-T建议兼容的远动规约TASE传输规约 | Telecontrol equipment and systems-Part 6-602:Telecontrol protocols compatible with ISO standards and ITU-T recommendations-TASE transport profiles |
KS C IEC 60870-6-2014 | 远动设备和系统第6-701部分:与ISO标准和ITU-T建议兼容的远动协议在终端系统中提供TASE.1应用服务的功能轮廓 | Telecontrol equipment and systems — Part 6-701: Telecontrol protocols compatible with ISO standards and ITU-T recommendations — Functional profile for providing the TASE.1 application service in end systems |
KS C IEC 60870-6-2014 | 远动设备和系统第6-702部分:与ISO标准和ITU-T建议兼容的远动协议在终端系统中提供TASE.2应用服务的功能轮廓 | Telecontrol equipment and systems — Part 6-702: Telecontrol protocols compatible with ISO standards and ITU-T recommendations — Functional profile for providing the TASE.2 application service in end systems |
KS C IEC 60870-6-2014 | 远动设备和系统.第6-802部分:与ISO标准和ITU-T建议兼容的远动协议.TASE.2目标模型 | Telecontrol equipment and systems — Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations — TASE.2 Object models |
KS C IEC 60871-1-2003 | 额定电压1000V以上交流电力系统用并联电容器第1部分:一般性能、试验和定额安全要求安装和运行指南 | Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V-Part 1:General-performance, testing and rating-Safety requirements-Guide for installation and operation |
KS C IEC 60871-4-2003 | 额定电压1000V以上交流电力系统用并联电容器第4部分:内部熔丝 | Shunt capacitors for AC power systems having a rated voltage above 1 000V-Part 4:Internal fuses |
KS C IEC 60873-2-2014 | 工业过程控制系统用电动和气动模拟图表记录仪第2部分:检验和例行试验指南 | Electrical and pneumatic analogue chart recorders for use in industrial process control systems — Part 2: Guidance for inspection and routine testing |
KS C IEC 60874-14-2003 | 光纤光缆连接器第14-10部分:B1型单模光纤端接SC-APC型8°非调谐光纤尾光纤或跳线连接器详细规范 | Connectors for optical fibres and cables-Part 14-10:Fibre optic pigtail or patch cord connector type SC-APC untuned 8° terminated on single mode fibre type B1-Detail specification |
KS C IEC 60874-14-2003 | 光纤光缆连接器第14-1部分:A1A、A1B型多模光纤端接SC-PC型标准光纤连接器详细规范 | Connectors for optical fibres and cables-Part 14-1:Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b |
KS C IEC 60874-14-2003 | 光纤光缆连接器第14-2部分:B1类单模光纤端接SC-PC型调谐光纤连接器详细规范 | Connectors for optical fibres and cables-Part 14-2:Detail specification for fibre optic connector type SC-PC tuned terminated to single-mode fibre type B1 |
KS C IEC 60874-14-2003 | 光纤光缆连接器第14-3部分:单模光纤SC型光纤转接器(单工)详细规范 | Connectors for optical fibres and cables-Part 14-3:Detail specification for fibre optic adaptor(simplex) type SC for single-mode fibre |
KS C IEC 60874-14-2003 | 光纤光缆连接器第14-4部分:SC型多模光纤适配器(单工)详细规范 | Connectors for optical fibres and cables-Part 14-4:Detail specification for fibre optic adaptor(simplex) type SC for multimode fibre |
KS C IEC 60874-14-2003 | 光纤光缆连接器第14-5部分:B1类单模光纤端接SC-PC型非调谐光纤连接器详细规范 | Connectors for optical fibres and cables-Part 14-5:Detail specification for fibre optic connector type SC-PC untuned terminated to single-mode fibre type B1 |
KS C IEC 60874-14-2003 | 光纤光缆连接器第14-7部分:B1类单模光纤端接SC-APC 9°调谐光纤连接器详细规范 | Connectors for optical fibres and cables-Part 14-7:Detail specification for fibre optic connector type SC-APC 9° tuned terminated to single-mode fibre Type B1 |
KS C IEC 60874-14-2003 | 光纤光缆连接器第14-9部分:B1型单模光纤端接SC-APC型调谐8°光纤连接器详细规范 | Connectors for optical fibres and cables-Part 14-9:Fibre optic connector type SC-APC tuned 8° terminated on single mode fibre type B1-Detail specification |
KS C IEC 60879-2002 | 环流扇和调速器的性能与结构 | Performance and construction of electric circulating fans and regulators |
KS C IEC 60880-2013 | 核电站.对安全重要的仪器和控制系统.形成A类功能的计算机系统的软件问题 | Nuclear power plants-Instrumentation and control systems important to safety-Software aspects for computer-based systems performing category A functions |
KS C IEC 60882-2014 | 无起动器管形荧光灯的预热要求 | Pre-heat requirements for starterless tubular fluorescent lamps |
KS C IEC 60884-1-2010 | 家用和类似用途固定电气装置的开关第1部分:一般要求 | Switches for household and similar fixed-electrical installations-Part 1:General requirements |
KS C IEC 60884-2-2008 | 家用和类似用途插头插座第2-1部分:熔丝插头的特殊要求 | Plugs and socket-outlets for household and similar purposes-Part 2-1:Particular requirements for fused plugs |
KS C IEC 60884-2-2008 | 家用和类似用途插头插座第2-2部分:器具插座的特殊要求 | Plugs and socket-outlets for household and similar purposes-Part 2-2:Particular requirements for socket-outlets for appliances |
KS C IEC 60884-2-2008 | 家用和类似用途插头插座第2-3部分:固定装置用无联锁开关插座的特殊要求 | Plugs and socket-outlets for household and similar purposes-Part 2-3:Particular requirements for switched socket-outlets without interlock for fixed installations |
KS C IEC 60884-2-2002 | 家用和类似用途插头插座第2-4部分:SELV插头插座的特殊要求 | Plugs and socket-outlets for household and similar purposes-Part 2-4:Particular requirements for plugs and socket-outlets for SELV |
KS C IEC 60884-2-2002 | 家用和类似用途插头插座第2-5部分:适配器的特殊要求 | Plugs and socket-outlets for household and similar purposes-Part 2-5:Particular requirements for adaptors |
KS C IEC 60884-2-2002 | 家用和类似用途插头插座第2-6部分:固定电气装置用带联锁开关插座的特殊要求 | Plugs and socket-outlets for household and similar purposes-Part 2-6:Particular requirements for switched socket-outlets with interlock for fixed electrical installations |
KS C IEC 60885-1-2014 | 电缆电气试验方法第1部分:电压450/750V及以下电缆、软线和电线的电气试验 | Electrical test methods for electric cables — Part 1: Electrical tests for cables, cords and wires for voltages up to and including 450/750 V |
KS C IEC 60885-2-2003 | 电缆电气试验方法第2部分:局部放电试验 | Electrical test methods for electric cables-Part 2:Partial discharge tests |
KS C IEC 60885-3-2003 | 电缆电气试验方法第3部分:挤制电力电缆局部放电测量试验方法 | Electrical test methods for electric cables-Part 3:Test methods for partial discharge measurements on lengths of extruded power cables |
KS C IEC 60887-2014 | 电灯泡玻壳命名方法 | Glass bulb designation system for lamps |
KS C IEC 60888-2006 | 绞线用镀锌钢线 | Zinc-coated steel wires for stranded conductors |
KS C IEC 60889-2003 | 架空导线用硬拉铝线 | Hard-drawn aluminium wire for overhead line conductors |
KS C IEC 60891-2012 | 晶体硅光伏器件实测I-V特性的温度和辐照度校正方法 | Photovoltaic devices-Procedures for temperature and irradiance corrections to measured I-V characteristics |
KS C IEC 60893-1-2008 | 电工用热固性树脂工业硬质层压板规范第1部分:定义、名称与符号及一般要求 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 1:Definitions, designations and general requirments |
KS C IEC 60893-2-2015 | 电工用热固性树脂工业硬质层压板规范第2部分:试验方法 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 2:Methods of test |
KS C IEC 60893-3-2003 | 电工用热固性树脂工业硬质层压板规范第3部分:单项材料规范活页1:工业硬质层压板类型 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 1:Types of industrial rigid laminated sheets |
KS C IEC 60893-3-2003 | 电工用热固性树脂工业硬质层压板规范第3部分:单项材料规范活页2:环氧树脂硬质层压板要求 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 2:Requirements for rigid laminated sheets based on epoxide resins |
KS C IEC 60893-3-2003 | 电工用热固性树脂工业硬质层压板规范第3部分:单项材料规范活页3:三聚氰胺树脂硬质层压板要求 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 3:Requirements for rigid laminated sheets based on melamine resins |
KS C IEC 60893-3-2003 | 电工用热固性树脂工业硬质层压板规范第3部分:单项材料规范活页4:酚醛树脂硬质层压板要求 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 4:Requirements for rigid laminated sheets based on phenolic resins |
KS C IEC 60893-3-2015 | 电工用热固性树脂工业硬质层压板规范第3部分:单项材料规范活页5:聚酯树脂硬质层压板要求 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 5:Requirements for rigid laminated sheets based on polyester resins |
KS C IEC 60893-3-2015 | 电工用热固性树脂工业硬质层压板规范第3部分:单项材料规范活页6:硅树脂硬质层压板要求 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 6:Requirements for rigid laminated sheets based on silicone resins |
KS C IEC 60893-3-2015 | 电工用热固性树脂工业硬质层压板规范第3部分:单项材料规范活页7:对聚酰亚胺树脂硬质层压板的要求 | Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3:Specifications for individual materials-Sheet 7:Requirements for rigid laminated sheets based on polyimide resins |
KS C IEC 60895-2015 | 带电作业.标称交流电压800kV以下和直流电压±600kV的带电作业用的导电衣着 | Live working — Conductive clothing for use at nominal voltage up to 800 kV AC and ±600 kV DC |
KS C IEC 60896-11-2005 | 固定式铅酸蓄电池组第11部分:通风型一般要求和试验方法 | Stationary lead-acid batteries-Part 11:Vented types-General requirements and methods of tests |
KS C IEC 60896-21-2016 | 固定式铅酸蓄电池组第21部分:阀控式试验方法 | Stationary lead-acid batteries-Part 21:Valve regulated types-Methods of test |
KS C IEC 60896-22-2016 | 固定式铅酸蓄电池组第22部分:阀控式要求 | Stationary lead-acid batteries-Part 22:Valve regulated types-Requirements |
KS C IEC 60898-1-2018 | 电气附件.家用和类似设施用过电流保护断路器.第1部分:交流操作断路器 | Electrical accessories — Circuit-breakers for overcurrent protection for household and similar installations — Part 1: Circuit-breakers for a.c. operation |
KS C IEC 60898-2-2012 | 家用和类似用途电器过电流保护断路器第2部分:交流和直流操作断路器 | Circuit-breakers for overcurrent protection for household and similar installations-Part 2:Circuit-breakers for a.c. and d.c. operation |
KS C IEC 60900-2015 | 带电作业.交流1000V和直流1500V以下带电作业用手持工具 | Live working — Hand tools for use up to 1 000 V AC and 1 500 V DC |
KS C IEC 60901-2014 | 单端荧光灯.性能规范 | Single-capped fluorescent lamps — Performance specifications |
KS C IEC 60903-2003 | 带电作业.绝缘材料手套 | Specification for gloves and mitts of insulation material for live working |
KS C IEC 60904-1-2009 | 光伏器件第1部分:光伏电流电压特性的测量 | Photovoltaic devices-Part 1:Measurement of photovoltaic current-voltage characteristics |
KS C IEC 60904-10-2012 | 光伏器件第10部分:线性测量方法 | Photovoltaic devices-Part 10:Methods of linearity measurement |
KS C IEC 60904-2-2010 | 光伏器件第2部分:标准太阳器件的要求 | Photovoltaic devices-Part 2:Requirements for reference solar devices |
KS C IEC 60904-3-2010 | 光伏器件第3部分:具有参考光谱辐照度数据的地面光伏(PV)太阳器件的测量原理 | Photovoltaic devices-Part 3:Measurement principles for terrestrial photovoltaic(PV) solar vices with reference spectral irradiance data |
KS C IEC 60904-4-2012 | 光伏器件第4部分:参考太阳器件确定校准可追溯性的程序 | Photovoltaic devices-Part 4:Reference solar devices-Procedures for establishing calibration traceability |
KS C IEC 60904-5-2013 | 光伏器件第5部分:用开路电压法测定光伏器件的等效电池温度 | Photovoltaic devices-Part 5:Determination of the equivalent cell temperature(ECT) of photovoltaic(PV) devices by the open-circuit voltage method |
KS C IEC 60904-7-2010 | 光伏器件第7部分:光伏器件测量用光谱失配校正的计算 | Photovoltaic devices-Part 7:Computation of the spectral mismatch correction for measurements of photovoltaic devices |
KS C IEC 60904-8-2015 | 光伏器件第8部分:光伏器件光谱响应率的测量 | Photovoltaic devices — Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device |
KS C IEC 60904-9-2010 | 光伏器件第9部分:太阳模拟器性能要求 | Photovoltaic devices-Part 9:Solar simulator performance requirements |
KS C IEC 60906-1-2014 | 家用和类似用途插头插座的IEC系统第1部分:交流16A、250V插头插座 | IEC system of plugs and socket-outlets for household and similar purposes ― Part 1: Plugs and socket-outlets 16 A 250 V a.c. |
KS C IEC 60906-2-2014 | 家用和类似用途插头插座的IEC系统.第2部分:交流15A125V插头插座 | IEC system of plugs and socket-outlets for household and similar purposes — Part 2: Plugs and socket-outlets 15 A 125 V a.c. |
KS C IEC 60906-3-2014 | 家用和类似用途插头插座的IEC系统.第3部分:16A 6V、12V、24V、48V、交流和直流SELV插头插座 | IEC System of plugs and socket-outlets for household and similar purposes — Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c. and d.c. |
KS C IEC 60909-0-2014 | 三相交流系统的短路电流.第0部分:电流计算 | Short-circuit currents in three-phase a.c. systems — Part 0: Calculation of currents |
KS C IEC 60909-3-2014 | 三相交流系统中短路电流.第3部分:两个独立的同时单线路对地短路和部分短路电流流入大地情况下的电流 | Short-circuit currents in three-phase AC systems — Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth |
KS C IEC 60910-2009 | 早期检测轻水反应堆偏离正常运行工况用的安全壳监测仪表 | Containment monitoring instrumentation for early detection of developing deviations from normal operation in light water reactors |
KS C IEC 60911-2004 | 监测加压轻水反应堆堆芯充分冷却的测量方法 | Measurements for monitoring adequate cooling within the core of pressurized light water reactors |
KS C IEC 60913-2003 | 电力牵引架空线路 | Electric traction overhead lines |
KS C IEC 60915-2005 | 电子设备用电容器和电阻器.单孔轴套安装的轴电子元件的轴端和轴套的优选尺寸 | Capacitors and resistors for electronic equipment-Preferred dimensions of spindle ends, bushes and for the mounting of single-hole, bush-mounted, spindle-operated electronic components |
KS C IEC 60921-2008 | 管形荧光灯镇流器.性能要求 | Ballasts for tubular fluorescent lamps-Performance requirements |
KS C IEC 60923-2008 | 灯附件.放电式灯用镇流器(管状荧光灯除外).性能要求 | Auxiliaries for lamps-Ballasts for discharge lamps(excluding tubular fluorescent lamps)-Performance requirements |
KS C IEC 60927-2008 | 电灯附件.起动装置(点火器除外).性能要求 | Auxiliaries for lamps-Starting devices(other than glow starters)-Performance requirements |
KS C IEC 60929-2008 | 管形荧光灯用交流电子镇流器.性能要求 | A.C supplied electronic ballasts for tubular fluorescent lamps-Performance requirements |
KS C IEC 60931-1-2003 | 额定电压1000V及以下交流系统用非自愈式并联电力电容器第1部分:一般性能、试验和定额安全要求安装和运行指南 | Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 000V-Part 1:General-Performance, testing and rating-Safety requirements-Guide for installation and operation |
KS C IEC 60931-2-2003 | 额定电压1000V及以下交流系统用非自愈式并联电容器第2部分:老化试验和破坏试验 | Shunt power capacitors of the non-self-healing type for a.c.systems having a rated voltage up to and including 1 000 V-Part 2:Ageing test and destruction test |
KS C IEC 60931-3-2003 | 额定电压1000V及以下交流系统用非自愈式并联电力电容器第3部分:内部熔丝 | Shunt power capacitors of the non-self-healing type for a.c.systems having a rated voltage up to and including 1 000 V-Part 3:Internal fuses |
KS C IEC 60933-5-2007 | 音频、视频和视听系统互连和匹配值第5部分:视频系统用Y/C连接器电匹配值和连接器的描述 | Audio, video and audiovisual systems-Interconnections and matching values-Part 5:Y/C connector for video systems-Electrical matching values and description of the connector |
KS C IEC 60934-2017 | 设备断路器 | Circuit-breakers for equipment(CBE) |
KS C IEC 60938-1-2003 | 抑制电磁干扰用固定电感器第1部分:总规范 | Fixed inductors for electromagnetic interference suppression-Part 1:Generic specification |
KS C IEC 60938-2-2003 | 抑制电磁干扰用固定电感器第2部分:分规范 | Fixed inductors for electromagnetic interference suppression-Part 2:Sectional specification |
KS C IEC 60939-1-2003 | 抑制无线电干扰用成套滤波器第1部分:总规范 | Complete filter units for radio interference suppression-Part 1:Generic specification |
KS C IEC 60939-2-2003 | 抑制无线电干扰用整套滤波装置第2部分:分规范 | Complete filter units for radio interference suppression-Part 2:Sectional specification |
KS C IEC 60940-2003 | 抑制无线电干扰用电容器、电阻器、电感器及整套滤波装置应用的指导信息 | Guidance information on the application of capacitors, resistors, inductors and complete filter units for radio interference suppression |
KS C IEC 60942-2017 | 电声学.音响校准仪 | Electroacoustics — Sound calibrators |
KS C IEC 60944-2014 | 含硅变压器液体的维护指南 | Guide for the maintenance of silicone transformer liquids |
KS C IEC 60947-1-2017 | 低压开关设备和控制设备.第1部分:一般规则 | Low-voltage switchgear and controlgear — Part 1: General rules |
KS C IEC 60947-2-2014 | 低压开关设备和控制设备.第2部分:断路器 | Low-voltage switchgear and controlgear — Part 2: Circuit-breakers |
KS C IEC 60947-4-2016 | 低压开关设备和控制设备第4-1部分:接触器和电动机起动器机电式接触器和电动机起动器 | Low-voltage switchgear and controlgear-Part 4-1:Contactors and motor-starters-Electromechanical contactors and motor-starters |
KS C IEC 60947-4-2012 | 低压开关设备和控制设备第4-3部分:接触器和电动机起动器交流半导体控制器和非电动机负载用接触器 | Low-voltage switchgear and controlgear-Part 4-3:Contactors and motor-starters-AC semiconductor controllers and contactors for non-motor loads |
KS C IEC 60947-5-2012 | 低压开关设备和控制设备第5-1部分:控制电路器件和开关元件机电控制电路器件 | Low-voltage switchgear and controlgear-Part 5-1:Control circuit devices and switching element-Electromechanical control circuit devices |
KS C IEC 60947-5-2017 | 低压开关设备和控制设备.第5-2部分:控制电路器件和开关元件.接近开关 | Low-voltage switchgear and controlgear — Part 5-2: Control circuit devices and switching elements — Proximity switches |
KS C IEC 60947-5-2014 | 低压开关设备和控制设备.第5-8部分:控制电路器件和开关元件.三位启用开关 | Low-voltage switchgear and controlgear — Part 5-8: Control circuit devices and switching elements — Three-position enabling switches |
KS C IEC 60947-5-2014 | 低压开关设备和控制设备.第5-9部分:控制电路器件和开关元件.流量开关 | Low-voltage switchgear and controlgear — Part 5-9: Control circuit devices and switching elements — Flow rate switches |
KS C IEC 60947-6-2014 | 低压开关设备和控制设备.第6-1部分:多功能设备.转换开关设备 | Low-voltage switchgear and controlgear — Part 6-1: Multiple function equipment — Transfer switching equipment |
KS C IEC 60947-6-2014 | 低压开关设备和控制设备.第6-2部分:多功能设备.控制和保护开关设备(或设备) | Low-voltage switchgear and controlgear — Part 6-2: Multiple function equipment — Control and protective switching devices(or equipment) (CPS) |
KS C IEC 60947-7-2014 | 低压开关设备和控制设备.第7-1部分:辅助设备.铜导线用接线板 | Low-voltage switchgear and controlgear — Part 7-1: Ancillary equipment — Terminal blocks for copper conductors |
KS C IEC 60949-2004 | 考虑非绝热热效应的、热量允许的短路电流的计算 | Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects |
KS C IEC 60950-1-2014 | 信息技术设备.安全.第1部分:一般要求 | Information technology equipment-Safety-Part 1:General requirements |
KS C IEC 60950-22-2014 | 信息技术设备.安全.第22部分:室外安装设备 | Information technology equipment — Safety — Part 22: Equipment to be installed outdoors |
KS C IEC 60951-1-2012 | 核电厂安全重要仪表事故和事故后辐射监测第1部分:一般要求 | Nuclear power plants-Instrumentation important to safety- Radiation monitoring for accident and post-accident conditions- Part 1:General requirements |
KS C IEC 60951-2-2012 | 核电厂安全重要仪表事故和事故后辐射监测第2部分:气态排出物和通风空气中放射性的连续离线监测设备 | Nuclear power plants-Instrumentation important to safety- Radiation monitoring for accident and post-accident conditions- Part 2:Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air |
KS C IEC 60951-3-2012 | 核电厂安全重要仪表事故和事故后辐射监测第3部分:连续高量程γ监测设备 | Nuclear power plants-Instrumentation important to safety-Radiation monitoring for accident and post-accident conditions-Part 3:Equipment for continuous high range area gamma monitoring |
KS C IEC 60951-4-2012 | 核电厂安全重要仪表事故和事故后辐射监测第4部分:连续在线或在线监测工艺流中放射性的设备 | Nuclear power plants-Instrumentation important to safety-Radiation monitoring for accident and post-accident conditions-Part 4:Equipment for continuous in-line or on-line monitoring of radioactivity in process streams |
KS C IEC 60952-1-2017 | 飞机用蓄电池组.第1部分:一般试验要求和性能水平 | Aircraft batteries — Part 1: General test requirements and performance levels |
KS C IEC 60952-2-2017 | 飞机用蓄电池组.第2部分:设计和制造要求 | Aircraft batteries — Part 2: Design and construction requirements |
KS C IEC 60952-3-2017 | 飞机用蓄电池组.第3部分:产品规格及设计与性能(DDP)的声明 | Aircraft batteries — Part 3: Product specification and declaration of design and performance(DDP) |
KS C IEC 60958-1-2008 | 数字音频接口第1部分:总则 | Digital audio interface-Part 1:General |
KS C IEC 60958-3-2008 | 数字音频接口第3部分:用户应用 | Digital audio interface-Part 3:Consumer applications |
KS C IEC 60958-4-2012 | 数字音频接口第4部分:专业应用 | Digital audio interface-Part 4:Professional applications |
KS C IEC 60960-2004 | 核电站安全参数显示系统的功能设计准则 | Functional design criteria for a safety parameter display system for nuclear power stations |
KS C IEC 60964-2012 | 核电厂控制室设计 | Nuclear power plants-Control rooms-Design |
KS C IEC 60965-2012 | 不通过主控制室实现反应堆停堆的辅助控制点 | Nuclear power plants-Control rooms-Supplementary control points for reactor shutdown without access to the main control room |
KS C IEC 60966-2-2014 | 射频同轴电缆组件.第2-2部分:柔软同轴电缆组件空白详细规范 | Radio frequency and coaxial cable assemblies — Part 2-2: Blank detail specification for flexible coaxial cable assemblies |
KS C IEC 60966-3-2014 | 射频同轴电缆组件.第3-2部分:GSM(0.8GHz-1GHz)用半柔软同轴电缆组件详细规范 | Radio frequency and coaxial cable assemblies — Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0.8 GHz∼1 GHz) |
KS C IEC 60966-4-2014 | 射频同轴电缆组件.第4部分:半硬性同轴电缆组件分规范 | Radio frequency and coaxial cable assemblies — Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies |
KS C IEC 60968-2014 | 普通照明用自镇流灯.安全要求 | Self-ballasted lamps for general lighting services — Safety requirements |
KS C IEC 60969-2002 | 普通照明用自镇流灯.性能要求 | Self-ballasted lamps for general lighting services-Performance requirements |
KS C IEC 60970-2014 | 绝缘液体.计算微粒数目和计算粒径大小的方法 | Insulating liquids — Methods for counting and sizing particles |
KS C IEC 60974-1-2014 | 弧焊设备.第1部分:焊接电源 | Arc welding equipment — Part 1: Welding power sources |
KS C IEC 60974-11-2016 | 电弧焊设备.第11部分:电极夹 | Arc welding equipment — Part 11: Electrode holders |
KS C IEC 60974-12-2016 | 弧焊设备.第12部分:焊接电缆用耦合装置 | Arc-welding equipment — Part 12: Coupling devices for welding cables |
KS C IEC 60974-2-2014 | 弧焊设备.第2部分:液体冷却系统 | Arc welding equipment — Part 2: Liquid cooling systems |
KS C IEC 60974-3-2014 | 电弧焊设备.第3部分:引弧和稳定装置 | Arc welding equipment — Part 3: Arc striking and stabilizing devices |
KS C IEC 60974-4-2014 | 电弧焊设备.第4部分:在用检验和试验 | Arc welding equipment — Part 4: In-service inspection and testing |
KS C IEC 60974-5-2016 | 电弧焊设备.第5部分:送丝器 | Arc welding equipment — Part 5: Wire feeders |
KS C IEC 60974-6-2016 | 弧焊设备第6部分:有限负荷手工金属电弧焊电源 | Arc welding equipment-Part 6:Limited duty manual metal arc welding power sources |
KS C IEC 60974-7-2016 | 电弧焊设备.第7部分:焊枪 | Arc welding equipment — Part 7: Torches |
KS C IEC 60974-8-2014 | 弧焊设备.第8部分:焊接和等离子切割系统用气体控制台 | Arc welding equipment — Part 8: Gas consoles for welding and plasma cutting systems |
KS C IEC 60976-2017 | 医疗电气设备. 医用电子加速器. 功能性能特征 | Medical electrical equipment-Medical electron accelerators-Functional performance characteristics |
KS C IEC 60980-2012 | 核电站安全系统的电气设备抗震性能鉴定的推荐规程 | Recommended practices for seismic qualification of electrical equipment of the safety system for nuclear generating stations |
KS C IEC 60981-A-2014 | 超重钢制电线管 | Extra-heavy duty rigid steel conduits for electrical installations |
KS C IEC 60983-A-2014 | 小型灯 | Miniature lamps |
KS C IEC 60984-2015 | 带电作业用绝缘袖套 | Sleeves of insulating material for live working |
KS C IEC 60986-2004 | 额定电压6kV(Um=72kV)~30kV(Um=36kV)电缆的短路温度限值 | Short-circuit temperature limits of electric cables with ratedvoltages from 6 kV(Um=7.2 kV) up to 30 kV(Um=36 kV) |
KS C IEC 60987-2014 | 对核电站安全起重要作用的可编程数字计算机 | Nuclear power plants — Instrumentation and control important to safety — Hardware design requirements for computer-based systems |
KS C IEC 60988-2012 | 核电厂.重要安全性仪器仪表.检测松动件的声学检测系统:特性、设计标准和操作规程 | Nuclear power plants-Instrumentation important to safety- Acoustic monitoring systems for detection of loose parts: characteristics, design criteria and operational procedures |
KS C IEC 60989-2005 | 分离变压器、单卷变压器、可调变压器和电抗器 | Separating transformers, autotransformers, variable transformers and reactors |
KS C IEC 60990-2003 | 接触电流和保护导体电流的测量方法 | Method of measurement of touch current and protective conductor current |
KS C IEC 60993-2005 | 开口镉镍电池用电解液 | Electrolyte for vented nickel-cadmium cells |
KS C IEC 60998-1-2003 | 家用和类似用途低压电路用连接器件第1部分:一般要求 | Connecting devices for low-voltage circuits for household and similar purposes-Part 1:General requirements |
KS C IEC 60998-2-2012 | 家用和类似用途低压电路用连接器件第2-2部分:作为独立单元的带无螺纹夹紧件的连接器件的特殊要求 | Connecting devices for low-voltage circuits for household and similar purposes-Part 2-2:Particular requirements for connecting devices as separate entities with screwless-type clamping units |
KS C IEC 60998-2-2008 | 家用和类似用途低压电路用连接器件第2-3部分:作为独立单元的带绝缘穿孔夹紧件的连接器件的特殊要求 | Connecting devices for low-voltage circuits for household and similar purposes-Part 2-3:Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
KS C IEC 60998-2-2008 | 家用和类似用途低压电路用连接器件第2-4部分:扭接式连接器件的特殊要求 | Connecting devices for low-voltage circuits for household and similar purposes-Part 2-4:Particular requirements for twist-on connecting devices |
KS C IEC 60998-2-2002 | 家用和类似用途低压电路连接器件第2-5部分:端子或连接器件用接线盒(接线盒和/或分接)的特殊要求 | Connecting devices for low-voltage circuits for household and similar purposes Part 2-5:Particular requirements for connecting boxes(junction and/or tapping) for terminals or connecting devices |
KS C IEC 60999-1-2014 | 连接装置.铜导线.螺钉型和无螺钉型夹紧装置的安全要求.第1部分:0.2 mm 2至35 mm 2(包括)导线夹紧装置的一般要求和特殊要求 | Connecting devices — Electrical copper conductors — Safety requirements for screw-type and screwless-type clamping units — Part 1: General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2(included) |
KS C IEC 60999-2-2014 | 连接装置.铜导线用螺钉式和无螺钉式夹紧装置的安全要求.第2部分:35mm2至300mm2导线的特殊要求 | Connecting devices — Safety requirements for screw-type and screwlesstype clamping units for electrical copper conductors — Part 2: Particular requirements for conductors from 35 mm2 up to 300 mm2 |
KS C IEC 61000-1-2014 | 电磁兼容性(EMC)第1部分:总则第1节:基本定义和术语的应用和解释 | Electromagnetic compatibility(EMC) — Part 1: General — Section 1: Application and interpretation of fundamental definitions and terms |
KS C IEC 61000-1-2005 | 电磁兼容性(EMC)-第1部分:总则-第3节:高空电磁脉冲(HEMP)对民用设备和系统的影响 | Electromagnetic compatibility(EMC)-Part 1:General-Section 3:The effects of high-altitude EMP(HEMP) on civil equipment and systems |
KS C IEC 61000-1-2007 | 电磁兼容性(EMC)-第1-4部分:一般-限制设备在2 kHz以下频率范围内的工频传导谐波电流发射的历史依据 | Electromagnetic compatibility(EMC)-Part 1-4:General-Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz |
KS C IEC 61000-2-2003 | 电磁兼容(EMC)-第2部分:环境-第10节:HEMP环境描述-传导骚扰 | Electromagnetic compatibility(EMC)-Part 2:Environment-Section 10:Description of HEMP environment-Conducted disturbance |
KS C IEC 61000-2-2003 | 电磁兼容性第2部分:环境第11节:大麻环境分类 | Electromagnetic compatibility(EMC)-Part 2:Environment-Section 11:Classification of HEMP environments |
KS C IEC 61000-2-2005 | 电磁兼容(EMC)-第2部分:环境-第1节:环境描述-公用供电系统低频传导骚扰和信号的电磁环境 | Electromagnetic compatibility(EMC)-Part 2:Environment-Section 1:Description of the environment-Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems |
KS C IEC 61000-2-2007 | 电磁兼容(EMC)-第2-12部分:公用中压供电系统低频传导骚扰和信号传输的环境兼容水平 | Electromagnetic compatibility(EMC)-Part 2-12:Environment-Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems |
KS C IEC 61000-2-2012 | 电磁兼容性(EMC)-第2-13部分:环境-大功率电磁环境-辐射和传导 | Electromagnetic compatibility(EMC)-Part 2-13:Environment-Highpower electromagnetic(HPEM) environments-Radiated and conducted |
KS C IEC 61000-2-2007 | 电磁兼容性(EMC)-第2-6部分:环境-工业设备电源中低频传导骚扰发射水平的评估 | Electromagnetic compatibility(EMC)-Part 2-6:Environment-Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances |
KS C IEC 61000-2-2007 | 电磁兼容性(EMC)-第2-7部分:环境-各种环境中的低频磁场 | Electromagnetic compatibility(EMC)-Part 2-7:Environment-Low frequency magnetic fields in various environments |
KS C IEC 61000-2-2007 | 电磁兼容(EMC)-第2-8部分:具有统计测量结果的公用供电系统的环境-电压暂降和短时中断 | Electromagnetic compatibility(EMC)-Part 2-8:Environment-Voltage dips and short interruptions on public electric power supply systems with statistical measurement results |
KS C IEC 61000-2-2003 | 电磁兼容(EMC)第2部分:环境第9节:HEMP环境描述辐射骚扰基础EMC出版物 | Electromagnetic compatibility(EMC) ― Part 2: Environment-Section 9: Description of HEMP environment-Radiated disturbance-Basic EMC publication |
KS C IEC 61000-3-2012 | 电磁兼容(EMC)-第3-4部分:限值-额定电流大于16A设备低压供电系统谐波电流发射限值 | Electromagnetic compatibility(EMC)-Part 3-4:Limits-Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A |
KS C IEC 61000-3-2010 | 电磁兼容(EMC)-第3-5部分:限值-额定电流大于75A设备低压供电系统中电压波动和闪变的限制 | Electromagnetic compatibility(EMC)-Part 3-5:Limits-Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A |
KS C IEC 61000-3-2014 | 电磁兼容性(EMC)第3部分:限值第6节:中高压电力系统中畸变负载发射限值的评定基础EMC出版物 | Electromagnetic compatibility(EMC) — Part 3: Limits — Section 6: Assessment of emission limits for distorting loads in MV and HV power systems — Basic EMC publication |
KS C IEC 61000-3-2003 | 电磁兼容(EMC)-第3部分:限值-第7节:中高压电力系统波动负荷发射限值的评定 | Electromagnetic compatibility(EMC)-Part 3:Limits-Section 7:Assessment of emission limits for fluctuating loads in MV and HV power systems |
KS C IEC 61000-3-2014 | 电磁兼容性(EMC)第3-8部分:限值低压电气装置上的信号发送发射水平、频带和电磁干扰水平 | Electromagnetic compatibility(EMC) — Part 3-8: Limits — Signalling on low-voltage electrical installations — Emission levels, frequency bands and electromagnetic disturbance levels |
KS C IEC 61000-4-2014 | 电磁兼容性(EMC)第4-10部分:试验和测量技术阻尼振荡磁场抗扰度试验基础EMC出版物 | Electromagnetic compatibility(EMC) — Part 4-10: Testing and measurement techniques — Damped oscillatory magnetic field immunity test — Basic EMC publication |
KS C IEC 61000-4-2012 | 电磁兼容性(EMC)-第4-1部分:试验和测量技术-IEC 61000-4系列概述 | Electromagnetic compatibility(EMC)-Part 4-1:Testing and measurement techniques-Overview of IEC 61000-4 series |
KS C IEC 61000-4-2008 | 电磁兼容(EMC)-第4-12部分:试验和测量技术-环形波抗扰度试验 | Electromagnetic compatibility(EMC)-Part 4-12:Testing and measurement techniques-Ring wave immunity test |
KS C IEC 61000-4-2010 | 电磁兼容性(EMC)-第4-13部分:试验和测量技术-交流电源端口的谐波和间谐波,包括市电信号,低频抗扰度试验 | Electromagnetic compatibility(EMC)-Part 4-13:Testing and measurement techniques-Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
KS C IEC 61000-4-2010 | 电磁兼容(EMC)-第4-14部分:试验和测量技术-每相输入电流不超过16A的设备的电压波动抗扰度试验 | Electromagnetic compatibility(EMC)-Part 4-14:Testing and measurement techniques-Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase |
KS C IEC 61000-4-2013 | 电磁兼容性(EMC)-第4-15部分:试验和测量技术-闪烁计-功能和设计规范 | Electromagnetic compatibility(EMC)-Part 4-15:Testing and measurement techniques-Flickermeter-Functional and design specifications |
KS C IEC 61000-4-2013 | 电磁兼容(EMC)-第4-16部分:试验和测量技术-频率范围为0Hz~150kHz的共模传导骚扰抗扰度试验 | Electromagnetic compatibility(EMC)-Part 4-16:Testing and measurement techniques-Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
KS C IEC 61000-4-2010 | 电磁兼容(EMC)-第4-17部分:试验和测量技术-直流输入电源端口纹波抗扰度试验 | Electromagnetic compatibility(EMC)-Part 4-17:Testing and measurement techniques-Ripple on d.c. input power port immunity test |
KS C IEC 61000-4-2014 | 电磁兼容性(EMC)第4-18部分:试验和测量技术阻尼振荡波抗扰度试验 | Electromagnetic compatibility(EMC) — Part 4-18: Testing and measurement techniques — Damped oscillatory wave immunity test |
KS C IEC 61000-4-2016 | 电磁兼容性(EMC)第4-19部分:试验和测量技术交流电源端口2 kHz至150 kHz频率范围内传导、差模干扰和信号抗扰度试验 | Electromagnetic compatibility(EMC) — Part 4-19: Testing and measurement techniques — Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
KS C IEC 61000-4-2013 | 电磁兼容(EMC)-第4-20部分:试验和测量技术-横向电磁(TEM)波导的发射和抗扰度试验 | Electromagnetic compatiility(EMC)-Part 4-20:Testing and measurement techniques-Emission and immunity testing in transverse electromagnetic(TEM) waveguides |
KS C IEC 61000-4-2005 | 电磁兼容性(EMC)-第4-21部分:试验和测量技术-混响室试验方法 | Electromagnetic compatibility(EMC)-Part 4-21:Testing and measurement techniques-Reverberation chamer test methods |
KS C IEC 61000-4-2005 | 电磁兼容性(EMC)-第4-23部分:试验和测量技术-HEMP和其他辐射骚扰防护装置的试验方法 | Electromagnetic compatibility(EMC)-Part 4-23:Testing and measurement techniques-Test methods for protective devices for HEMP and other radiated disturbances |
KS C IEC 61000-4-2005 | 电磁兼容性(EMC)-第4部分:试验和测量技术-第24节:HEMP传导骚扰保护装置的试验方法 | Electromagnetic compatibility(EMC)-Part 4:Testing and measurement techniques-Section 24:Test methods for protective devices for HEMP conducted disturbance |
KS C IEC 61000-4-2014 | 电磁兼容性(EMC)第4-25部分:试验和测量技术设备和系统的HEMP抗扰度试验方法 | Electromagnetic compatibility(EMC) — Part 4-25: Testing and measurement techniques — HEMP immunity test methods for equipment and systems |
KS C IEC 61000-4-2014 | 电磁兼容性(EMC)第4-27部分:试验和测量技术每相输入电流不超过16A的设备的不平衡、抗扰度试验 | Electromagnetic compatibility(EMC) — Part 4-27: Testing and measurement techniques — Unbalance, immunity test for equipment with input current not exceeding 16 A per phase |
KS C IEC 61000-4-2010 | 电磁兼容(EMC)-第4-28部分:试验和测量技术-频率变化,每相输入电流不超过16A的设备的抗扰度试验 | Electromagnetic compatibility(EMC)-Part 4-28:Testing and measurement techniques-Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
KS C IEC 61000-4-2014 | 电磁兼容性(EMC)第4-29部分:试验和测量技术直流输入电源端口上的电压暂降、短时中断和电压变化抗扰度试验 | Electromagnetic compatibility(EMC) — Part 4-29: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
KS C IEC 61000-4-2012 | 电磁兼容(EMC)-第4-30部分:试验和测量技术-电能质量测量方法 | Electromagnetic compatibility(EMC)-Part 4-30:Testing and measurement techniques-Power quality measurement methods |
KS C IEC 61000-4-2012 | 电磁兼容(EMC)-第4-33部分:试验和测量技术-大功率瞬态参数的测量方法 | Electromagnetic compatibility(EMC)-Part 4-33:Testing and measurement techniques-Measurement methods for high-power transient parameters |
KS C IEC 61000-4-2016 | 电磁兼容性(EMC)第4-34部分:试验和测量技术每相输入电流大于16A的设备的电压暂降、短时中断和电压变化抗扰度试验 | Electromagnetic compatibility(EMC) — Part 4-34: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase |
KS C IEC 61000-4-2017 | 电磁兼容性(EMC)第4-36部分:试验和测量技术设备和系统的IEMI抗扰度试验方法 | Electromagnetic compatibility(EMC) — Part 4-36: Testing and measurement techniques — IEMI immunity test methods for equipment and systems |
KS C IEC 61000-4-2010 | 电磁兼容性(EMC)-第4-7部分:试验和测量技术-供电系统及相关设备谐波、间谐波测量和仪表通用指南 | Electromagnetic compatibility(EMC)-Part 4-7:Testing and measurement techniques-General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
KS C IEC 61000-5-2014 | 电磁兼容性(EMC)第5部分:安装和缓解指南第1节:一般考虑基础EMC出版物 | Electromagnetic compatibility(EMC) — Part 5: Installation and mitigation guidelines — Section 1: General considerations — Basic EMC publication |
KS C IEC 61000-5-2014 | 电磁兼容性(EMC)第5部分:安装和缓解指南第2节:接地和布线 | Electromagnetic compatibility(EMC) — Part 5: Installation and mitigation guidelines — Section 2: Earthing and cabling |
KS C IEC 61000-5-2005 | 电磁兼容性(EMC)-第5部分:安装和缓解指南-第4节:对HEMP的抗扰度-针对HEMP辐射骚扰的保护装置规范-基础EMC出版物 | Electromagnetic compatibility(EMC)-Part 5:Installation and mitigation guidelines-Section 4:Immunity to HEMP-Specifications for protective devices against HEMP radiated disturbance-Basic EMC publication |
KS C IEC 61000-5-2003 | 电磁兼容性(EMC)-第5部分:安装和缓解指南-第5节:HEMP传导骚扰保护装置规范-基础EMC出版物 | Electromagnetic compatibility(EMC)-Part 5:Installation and mitigation guidelines-Section 5:Specification of protective devices for HEMP conducted disturbance-Basic EMC publication |
KS C IEC 61000-5-2003 | 电磁兼容性(EMC)-第5部分:安装和缓解指南-第7节:外壳对电磁干扰的防护等级(EM代码) | Electromagnetic compatibility(EMC)-Part 5:Installation and mitigation guidelines-Section 7:Degrees of protection provided by enclosures against electromagnetic disturbances(EM code) |
KS C IEC 61000-6-2012 | 电磁兼容(EMC)-第6-6部分:通用标准-室内设备用HEMP抗扰度 | Electromagnetic compatibility(EMC)-Part 6-6:Generic standards-HEMP immunity for indoor equipment |
KS C IEC 61000-6-2016 | 电磁兼容性(EMC)第6-7部分:通用标准工业场所中用于执行安全相关系统(功能安全)功能的设备的抗扰度要求 | Electromagnetic compatibility (EMC) – Part 6-7: Generic standards – Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
KS C IEC 61003-2-2014 | 工业过程控制系统.模拟输入和两个或多个状态输出的仪表.第2部分:检验和例行试验指南 | Industrial-process control systems — Instruments with analogue inputs and two or multi-state outputs — Part 2: Guidance for inspection and routine testing |
KS C IEC 61008-1-2017 | 家用及类似用途不带集成过电流保护的残余电流驱动的断路器(RCCBs).第1部分:一般规则 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses(RCCBs) — Part 1: General rules |
KS C IEC 61008-2-2014 | 家用和类似用途的没有综合过电流保护的剩余电流断路器(RCCB's) 第2-1部分:通用规则对与功能上线电压无关的剩余电流断路器的适用性 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses(RCCB’s) — Part 2-1: Applicability of the general rules to RCCB’s functionally independent of line voltage |
KS C IEC 61008-2-2014 | 家用和类似用途的没有综合过电流保护的剩余电流断路器(RCCB's) 第2-2部分:通用规则对功能上与线电压有关的剩余电流断路器的适用性 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses(RCCB’s) — Part 2-2: Applicability of the general rules to RCCB’s functionally dependent on line voltage |
KS C IEC 61009-1-2017 | 家用及类似用途带集成过电流保护的残余电流驱动的断路器(RCBOs).第1部分:一般规则 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses(RCBOs) — Part 1: General rules |
KS C IEC 61009-2-2014 | 家用和类似用途的有综合过电流保护的剩余电流断路器(RCBO's) 第2-1部分:通用规则对功能上与线电压无关的剩余电流断路器的适用性 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses(RCBO's) — Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage |
KS C IEC 61009-2-2014 | 家用和类似用途的有综合过电流保护的剩余电流断路器(RCBO's) 第2-2部分:通用规则对功能上与线电压有关的剩余电流断路器的适用性 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses(RCBO's) — Part 2-2: Applicability of the general rules to RCBO's functionally dependent on line voltage |
KS C IEC 61010-1-2018 | 测量、控制和实验室用电气设备的安全要求第1部分:一般要求 | Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 1: General requirements |
KS C IEC 61010-2-2018 | 测量、控制和实验室用电气设备的安全要求.第2-010部分:材料加热用实验室设备的特殊要求 | Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials |
KS C IEC 61010-2-2018 | 测量、控制和实验室用电气设备的安全要求.第2-040部分:医用材料处理用消毒器和清洗消毒器的特殊要求 | Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
KS C IEC 61010-2-2014 | 测量、控制和实验室用电气设备的安全要求.第2-20部分:实验室离心机的特殊要求 | Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-20: Particular requirements for laboratory centrifuges |
KS C IEC 61010-2-2002 | 测量、控制和实验室用电气设备的安全要求第2-41部分:用蒸汽处理药物和实验室工艺的高压釜的特殊要求 | Safety requipements for electrical equipment for measurement, control, and laboratory use-Part 2-41:Particular requirements for autoclaves using steam for the treatment of medicals, and for laboratory processes |
KS C IEC 61010-2-2014 | 测量、控制和实验室用电气设备的安全要求.第2-51部分:混合和搅拌用实验室设备的特殊要求 | Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-51: Particular requirements for laboratory equipment for mixing and stirring |
KS C IEC 61010-2-2014 | 测量、控制和实验室用电气设备的安全要求.第2-61部分:具有热原子化和电离作用的实验室原子分光计的特殊要求 | Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-61: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization |
KS C IEC 61012A-2017 | 伴有超声情况下可听声测量用滤波器 | Filters for the measurement of audible sound in the presence of ultrasound |
KS C IEC 61017-1-2005 | 环境监测用便携式、移动式或安装式X或γ辐射率计第1部分:率计 | Portable, transportable or installed X or gamma radiation ratemeters for environmental monitoring-Part 1:Ratemeters |
KS C IEC 61017-2-2005 | 辐射防护仪表环境监测用便携式、移动式或安装式X或γ辐射测量设备第2部分:集成组件 | Radiation protection instrumentation-Portable, transportable or installed equipment to measure X or gamma radiation for environmental monitoring-Part 2:Integrating assemblies |
KS C IEC 61019-1-2007 | 声表面波(SAW)谐振器.第1部分:通用规范 | Surface acoustic wave(SAW) resonators-Part 1:Generic specification |
KS C IEC 61019-2-2007 | 声表面波(SAW)谐振器.第2部分:使用指南 | Surface acoustic wave(SAW) resonators-Part 2:Guide to the use |
KS C IEC 61019-3-2008 | 声表面波(SAW)谐振器 第3部分:标准外形和引线连接 | Surface acoustic wave(SAW) resonators-Part 3:Standard outlines and lead connections |
KS C IEC 61020-2-2002 | 电子设备用机电开关第2部分:旋转开关分规范 | Electromechanical switches for use in electronic equipment-Part 2:Sectional specification for rotary switches |
KS C IEC 61020-3-2002 | 电子设备用机电开关第3部分:成列直插封装开关分规范第1节空白详细规范 | Electromechanical switches for use in electronic equipment-Part 3:Sectional specification for in-line package switches Section 1-Blank detail specification |
KS C IEC 61020-4-2002 | 电子设备用机电开关第4部分:杠杆(拨动)开关分规范 | Electromechanical switches for use in electronic equipment Part 4:Sectional specification for lever(toggle) switches |
KS C IEC 61020-5-2002 | 电子设备用机电开关第5部分:按钮开关分规范 | Electromechanical switches for use in electronice quipment-Part 5:Sectional specification for pushbutton switches |
KS C IEC 61020-6-2002 | 电子设备用机电开关第6部分:敏感开关分规范 | Electromechanical switches for use in electronic equipment-Part 6:Sectional specification for sensitive switches |
KS C IEC 61028-2013 | 电测量仪表.X-Y记录仪 | Electrical measuring instruments-X-Y recorders |
KS C IEC 61029-1-2014 | 移动式电动工具的安全第1部分:一般要求 | Safety of transportable motor-operated electric tools — Part 1: General requirements |
KS C IEC 61029-2-2007 | 移动式电动工具安全第2-10部分:切割砂轮机的特殊要求 | Transportable motor-operated electric tools-Safety-Part 2-10:Particular requirements for cutting-off grinders |
KS C IEC 61029-2-2007 | 移动式电动工具安全第2-11部分:斜接台式锯的特殊要求 | Transportable motor-operated electric tools-Safety-Part 2-11:Particular requirements for mitre-bench saws |
KS C IEC 61029-2-2007 | 移动式电动工具的安全第2-1部分:圆锯的特殊要求 | Safety of transportable motor-operated electric tools-Part 2-1:Particular requirements for circular saws |
KS C IEC 61029-2-2017 | 移动式电动工具的安全第2-12部分:攻丝机的特殊要求 | Safety of transportable motor-operated electric tools — Part 2-12: Particular requirements for threading machines |
KS C IEC 61029-2-2003 | 移动式电动工具的安全第二部分:摇臂锯的专用要求 | Safety of transportable motor-operated electric tools-Part 2:Particular requirements for radial arm saws |
KS C IEC 61029-2-2007 | 移动式电动工具的安全第2-3部分:刨床和厚度机的特殊要求 | Safety of transportable motor-operated electric tools-Part 2-3:Particular requirements for planers and thicknessers |
KS C IEC 61029-2-2003 | 移动式电动工具的安全第2部分:台式磨床的特殊要求 | Safety of transportable motor-operated electric tools-Part 2:Particular requirements for bench grinders |
KS C IEC 61029-2-2003 | 移动式电动工具的安全第二部分:带锯的专用要求 | Safety of transportable motor-operated electric tools-Part 2:Particular requirements for band saws |
KS C IEC 61029-2-2003 | 移动式电动工具的安全第2部分:供水金刚石钻头的特殊要求 | Safety of transportable motor-operated electric tools-Part 2:Particular requirements for diamond drills with water supply |
KS C IEC 61029-2-2003 | 移动式电动工具的安全第二部分:供水金刚石锯的专用要求 | Safety of transportable motor-operated electric tools-Part 2:Particular requirements for diamond saws with water supply |
KS C IEC 61029-2-2007 | 移动式电动工具的安全第2-8部分:单轴立式压模机的特殊要求 | Safety of transportable motor-operated electric tools-Part 2-8:Particular requirements for single spindle vertical moulders |
KS C IEC 61029-2-2003 | 移动式电动工具的安全第二部分:斜切锯的特殊要求 | Safety of transportable motor-operated electric tools-Part 2:Particular requirements for mitre saws |
KS C IEC 61031-2009 | 核电厂正常工况和预计运行事件期间的固定区域γ辐射剂量率监测设备的设计、安装和应用准则 | Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use in nuclear power plants during normal operation and anticipated operational occurrences |
KS C IEC 61032-2005 | 外壳对人体和设备的防护.检验用探头 | Protection of persons and equipment by enclosures-Probes for verification |
KS C IEC 61033-2018 | 测定浸渍剂对漆包线基材粘结强度的试验方法 | Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate |
KS C IEC 61034-1-2008 | 电缆在规定条件下燃烧烟密度的测量第1部分:试验装置 | Measurement of smoke density of cables burning under defined conditions-Part 1:Test apparatus |
KS C IEC 61034-2-2013 | 电缆在规定条件下燃烧烟密度的测量第2部分:试验程序和要求 | Measurement of smoke density of cables burning under defined conditions-Part 2:Test procedure and requirements |
KS C IEC 61035-1-2003 | 电气装置用导管配件规范第1部分:一般要求 | Specification for conduit fittings for electrical installations-Part 1:General requirements |
KS C IEC 61039-2014 | 绝缘液体的分类 | Classification of insulating liquids |
KS C IEC 61043A-2017 | 电声学 声强测量仪 压强传声器配对的测量 | Electroacousitics — Instruments for the measurement of sound intensity — Measurement with pairs of pressure sensing microphones |
KS C IEC 61047-2014 | 钨丝灯用交直流供电电子降压转换器.性能要求 | DC or AC supplied electronic step-down convertors for filament lamps — Performance requirements |
KS C IEC 61048-2008 | 管状荧光灯和其他放电灯具电路中用的电容器.通用和安全要求 | Auxiliaries for lamps-Capacitors for use in tubular fluorescent and other discharge lamp circuits-General and safety requirements |
KS C IEC 61049-A-2014 | 灯的附件.管形荧光灯和其它放电灯电路用电容器.性能要求 | Auxiliaries for lamps — Capacitors for use in tubular fluorescent and other discharge lamp circuits — Performance requirements |
KS C IEC 61050-2002 | 空载输出电压超过1000V的管形放电灯用变压器(通称霓虹灯变压器).一般要求和安全要求 | Transformer for tubular discharge lamps having a no-load output voltage exceeding 1000 V General and safety requirements |
KS C IEC 61051-1-2018 | 电子设备用压敏电阻器第1部分:总规范 | Varistors for use in electronic equipment-Part 1:Generic specification |
KS C IEC 61051-2-2005 | 电子设备用压敏电阻器第2部分:浪涌抑制型压敏电阻器分规范 | Varistors for use in electronic equipment-Part 2:Sectional specification for surge suppression varistors |
KS C IEC 61053-2-2005 | 使用B型格式12.65mm(0.5in)磁带的螺旋扫描盒式磁带录像系统.调频录音.第2部分:525行-60场体系 | Helical-scan video tape cassette system using 12.65 mm(0.5 in) magnetic tape on type beta format-FM audio recording-Part 2:525 line-60 field systems |
KS C IEC 61056-1-2014 | 通用铅酸蓄电池组(阀门调节型).第1部分:一般要求,功能要求,功能特性.试验方法 | General purpose lead-acid batteries(valve-regulated types) — Part 1: General requirements, functional characteristics — Methods of test |