电子电气类标准(十二)
2019-07-23 20:42标准号 | 中文名称 | 英文名称 |
KS C IEC 62255-4-2014 | 宽带数字通信用对绞/星绞多芯对称电缆(高位率数字存取通信网络).外部设备电缆.第4-1部分:架空引入电缆.空白详细规范 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) — Outside plant cables — Part 4-1: Aerial drop cables — Blank detail specification |
KS C IEC 62255-5-2014 | 宽带数字通信用对绞/星绞多芯对称电缆(高比特率数字存取通信网络).外部设备电缆.第5-1部分:填充下降电缆.空白详细规范 | Multicore and symmetrical pair/quad cables for broadband digital communications(high bit rate digital access telecommunication networks) — Outside plant cables — Part 5-1: Filled drop cables — Blank detail specification |
KS C IEC 62257-7-2012 | 农村电气化用小型可再生能源和混合系统的建议第7-1部分:发电机光伏发电机 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 7-1:Generators-Photovoltaic generators |
KS C IEC 62257-7-2010 | 农村电气化用小型可再生能源和混合系统的建议第7部分:发电机 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 7:Generators |
KS C IEC 62257-7-2010 | 农村电气化用小型可再生能源和混合系统的建议第7-3部分:发电机组农村电气化系统发电机组的选择 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 7-3:Generator set-Selection of generator sets for rural electrification systems |
KS C IEC 62257-9-2010 | 农村电气化用小型可再生能源和混合系统的建议第9-1部分:微型电力系统 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 9-1:Micropower systems |
KS C IEC 62257-9-2010 | 农村电气化用小型可再生能源和混合系统的建议第9-6部分:综合系统光伏单个电气化系统的选择 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 9-6:Integrated system-Selection of Photovoltaic Individual Electrification Systems(PV-IES) |
KS C IEC 62259-2016 | 含碱或其他非酸性电解质的蓄电池和蓄电池组.部分气体复合的镍镉柱状二次单电池 | Secondary cells and batteries containing alkaline or other non-acid electrolytes-Nickel-cadmium prismatic secondary single cells with partial gas recombination |
KS C IEC 62262-2005 | 防护外部机械冲击的电气设备外壳的防护等级(IK码) | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts(IK code) |
KS C IEC 62270-2006 | 水力发电站自动化.计算机控制用指南 | Hydroelectric power plant automation-Guide for computer-based control |
KS C IEC 62271-1-2014 | 高压开关设备和控制设备.第1部分:通用规范 | High-voltage switchgear and controlgear — Part 1: Common specifications |
KS C IEC 62271-100-2014 | 高压开关设备和控制设备.第100部分:交流断路器 | High-voltage switchgear and controlgear — Part 100: Alternating-current circuit-breakers |
KS C IEC 62271-101-2014 | 高压开关设备和控制设备.第101部分:合成试验 | High-voltage switchgear and controlgear — Part 101: Synthetic testing |
KS C IEC 62271-102-2015 | 高压开关设备和控制设备.第102部分:交流隔离开关和接地开关 | High-voltage switchgear and controlgear — Part 102: Alternating current disconnectors and earthing switches |
KS C IEC 62271-103-2015 | 高压开关设备和控制设备.第103部分:额定电压1千伏至52千伏的开关 | High-voltage switchgear and controlgear — Part 103: Switches for rated voltages above 1 kV up to and including 52 kV |
KS C IEC 62271-104-2014 | 高压开关设备和控制设备.第104部分:额定电压52kV及以上的交流开关 | High-voltage switchgear and controlgear — Part 104: Alternating current switches for rated voltages of 52 kV and above |
KS C IEC 62271-105-2014 | 高压开关设备和控制设备.第105部分:额定电压1千伏至52千伏的交流开关-熔丝组合 | High-voltage switchgear and controlgear — Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV |
KS C IEC 62271-107-2014 | 高压开关设备和控制设备.第107部分:额定电压1 kV至52 kV的交流带保险丝电路开关 | High-voltage switchgear and controlgear — Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV |
KS C IEC 62271-108-2014 | 高压开关设备和控制设备.第108部分:额定电压72.5kV及以上的高压交流断路器 | High-voltage switchgear and controlgear — Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72.5 kV and above |
KS C IEC 62271-203-2014 | 高压开关设备和控制设备.第203部分:额定电压大于52kV的气体绝缘金属封闭开关设备 | High-voltage switchgear and controlgear — Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
KS C IEC 62271-205-2014 | 高压开关设备和控制设备.第205部分:额定电压大于52kV的小型开关设备组件 | High-voltage switchgear and controlgear — Part 205: Compact switchgear assemblies for rated voltages above 52 kV |
KS C IEC 62271-207-2014 | 高压开关设备和控制设备.第207部分:额定电压高于52kV的气体绝缘开关设备组件的抗震鉴定 | High-voltage switchgear and controlgear — Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV |
KS C IEC 62271-209-2014 | 高压开关设备和控制设备.第209部分:额定电压52kV以上气体绝缘金属封闭开关设备的电缆连接.充液和挤压绝缘电缆.充液和干式电缆终端 | High-voltage switchgear and controlgear — Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV — Fluid-filled and extruded insulation cables — Fluid-filled and dry-type cable-terminations |
KS C IEC 62271-3-2009 | 高压开关设备和控制设备第3部分:基于KS C IEC 61850的数字接口 | High-voltage switchgear and controlgear-Part 3:Digital interfaces based on KS C IEC 61850 |
KS C IEC 62274-2017 | 医用电气设备放射治疗记录和验证系统的安全性 | Medical electrical equipment ─ Safety of radiotherapy record and verify systems |
KS C IEC 62275-2014 | 电缆管理系统.电气装置用扎带 | Cable management systems — Cable ties for electrical installations |
KS C IEC 62276-2018 | 表面声波(SAW)器件用单晶片规范和测量方法 | Single crystal wafers for surface acoustic wave(SAW) device applications — Specifications and measuring methods |
KS C IEC 62278-2004 | 铁路应用可靠性、可用性、可维护性和安全性(RAMS)规范和论证 | Railway applications-Specification and demonstration of reliability, availability, maintainability and safety(RAMS) |
KS C IEC 62279-2004 | 铁路应用通信、信号和处理系统铁路控制和保护系统软件 | Railway applications-Communications, signalling and processing systems-Software for railway control and protection systems |
KS C IEC 62280-1-2004 | 铁路应用通信、信号和处理系统第1部分:封闭传输系统中的安全相关通信 | Railway applications-Communication, signalling and processing systems-Part 1:Safety-related communication in closed transmission systems |
KS C IEC 62280-2-2004 | 铁路应用通信、信号和处理系统第2部分:开放传输系统中的安全相关通信 | Railway applications-Communication, signalling and processing systems-Part 2:Safety-related communication in open transmission systems |
KS C IEC 62281-2017 | 运输途中原电池和二次锂电池及蓄电池组的安全 | Safety of primary and secondary lithium cells and batteries during transport |
KS C IEC 62282-2-2013 | 燃料电池技术第2部分:燃料电池模块 | Fuel cell technologies-Part 2:Fuel cell modules |
KS C IEC 62282-3-2014 | 燃料电池技术.第3-100部分:固定燃料电池动力系统.安全性 | Fuel cell technologies — Part 3-100: Stationary fuel cell power systems — Safety |
KS C IEC 62282-3-2014 | 燃料电池技术.第3-200部分:固定燃料电池动力系统.性能试验方法 | Fuel cell technologies — Part 3-200: Stationary fuel cell power systems — Performance test methods |
KS C IEC 62282-3-2014 | 燃料电池技术.第3-201部分:固定燃料电池动力系统.小型燃料电池动力系统的性能试验方法 | Fuel cell technologies — Part 3-201: Stationary fuel cell power sytems — Performance test methods for small fuel cell power systems |
KS C IEC 62282-3-2014 | 燃料电池技术.第3-300部分:固定燃料电池动力系统.安装 | Fuel cell technologies — Part 3-300: Stationary fuel cell power systems — Installation |
KS C IEC 62282-4-2016 | 燃料电池技术.第4-101部分:除道路车辆和辅助动力装置(APU)外推进用燃料电池动力系统.电动工业卡车的安全 | Fuel cell technologies — Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units(APU) — Safety of electrically powered industrial trucks |
KS C IEC 62282-5-2015 | 燃料电池技术.第5-1部分:便携式燃料电池设备.安全和性能要求 | Fuel cell technologies-Part 5-1:Portable fuel cell appliances- Safety and performance requirement |
KS C IEC 62282-6-2014 | 燃料电池技术.第6-200部分:微型燃料电池动力系统.性能试验方法 | Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods |
KS C IEC 62282-7-2013 | 燃料电池技术.第7-1部分:聚合物电解质燃料电池(PEFC)的单电池试验方法 | FUEL CELL TECHNOLOGIES – Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC) |
KS C IEC 62295-2014 | 多媒体系统.异类网络上互连用公共通信协议 | Multimedia systems — Common communication protocol for inter-connectivity on heterogeneous networks |
KS C IEC 62297-1-2011 | 广播用触发报文第1部分:格式 | Triggering messages for broadcast applications-Part 1:Format |
KS C IEC 62297-2-2011 | 广播用触发电文第2部分:传输方法 | Triggering messages for broadcast applications-Part 2:Transport methods |
KS C IEC 62298-1-2011 | 电视网络应用第1部分:一般说明 | TeleWeb application-Part 1:General description |
KS C IEC 62298-2-2011 | 电视网络应用第2部分:传输方法 | TeleWeb application-Part 2:Delivery methods |
KS C IEC 62300-2005 | 带塑料光纤的用户音频/视频设备数字接口 | Consumer audio/video equipment digital interface with plastic optical fibre |
KS C IEC 62301-2017 | 家用电气设备待机电力测定方法 | Household electrical appliances-Measurement of standby power |
KS C IEC 62303-2014 | 辐射防护仪器空气中氚监测设备 | Radiation protection instrumentation — Equipment for monitoring airborne tritium |
KS C IEC 62305-1-2012 | 雷电防护第1部分:总则 | Protection against lightning-Part 1:General principles |
KS C IEC 62305-2-2012 | 雷电防护第2部分:风险管理 | Protection against lightning-Part 2:Risk management |
KS C IEC 62305-3-2012 | 雷电防护第3部分:建筑物的物理损伤和人身危害 | Protection against lightning-Part 3:Physical damage to structures and life hazard |
KS C IEC 62305-4-2012 | 雷电防护第4部分:建筑物内的电气和电子系统 | Protection against lightning-Part 4:Electrical and electronic systems within structures |
KS C IEC 62311-2014 | 与人体电磁场暴露限制有关的电子和电气设备的评估(0 Hz~300 GHz) | Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields(0 Hz∼300 GHz) |
KS C IEC 62315-1-2014 | 未压缩数字视频接口用DTV格式.第1部分:总则 | DTV profiles for uncompressed digital video interfaces — Part 1: General |
KS C IEC 62317-1-2008 | 铁氧体磁心尺寸第1部分:总规范 | Ferrite cores-Dimensions-Part 1:General specification |
KS C IEC 62317-8-2016 | 铁氧体磁芯尺寸第8部分:E形磁芯 | Ferrite cores ― Dimensions ― Part 8: E-cores |
KS C IEC 62317-9-2015 | 铁氧体磁芯尺寸第9部分:平面磁芯 | Ferrite cores-Dimensions-Part 9:Planar cores |
KS C IEC 62321-1-2014 | 电工产品中某些物质的测定第1部分:引言和概述 | Determination of certain substances in electrotechnical products — Part 1: Introduction and overview |
KS C IEC 62321-2-2014 | 电工产品中某些物质的测定第2部分:拆卸、分离和机械样品制备 | Determination of certain substances in electrotechnical products — Part 2: Disassembly, disjointment and mechanical sample preparation |
KS C IEC 62321-2009 | 电工产品六种调节物质(铅、汞、镉、六价铬、多溴联苯、多溴联苯醚)含量的测定 | Electrotechnical products-Determination of levels of six regulated substances(lead, mercury, cadmium, hexavalent chromium,polybrominated biphenyls, polybrominated diphenyl ethers) |
KS C IEC 62321-3-2014 | 电工产品中某些物质的测定第3-1部分:筛选用X射线荧光光谱法测定铅、汞、镉、总铬和总溴 | Determination of certain substances in electrotechnical products — Part 3-1: Screening — Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry |
KS C IEC 62321-3-2014 | 电工产品中某些物质的测定第3-2部分:筛选聚合物和电子产品中总溴的燃烧离子色谱法 | Determination of certain substances in electrotechnical products — Part 3-2: Screening — Total bromine in polymers and electronics by Combustion — Ion Chromatography |
KS C IEC 62321-4-2014 | 电工产品中某些物质的测定第4部分:用cv-aas、cv-afs、icp-oes和icp-ms测定聚合物、金属和电子产品中的汞 | Determination of certain substances in electrotechnical products — Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS |
KS C IEC 62321-5-2014 | 电工产品中某些物质的测定第5部分:聚合物和电子产品中镉、铅和铬第5部分:聚合物和电子产品中镉、铅和铬 | Determination of certain substances in electrotechnical products — Part 5: Cadmium, lead and chromium in polymers and electronics Part 5: Cadmium, lead and chromium in polymers and electronics |
KS C IEC 62321-6-2017 | 电工产品中某些物质的测定第6部分:用气相色谱-质谱法(GC-MS)测定聚合物中的多溴联苯和多溴联苯醚 | Determination of certain substances in electrotechnical products — Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS |
KS C IEC 62321-7-2017 | 电工产品中某些物质的测定.第7-1部分:六价铬.用比色法测定金属上无色和有色防腐涂层中六价铬(Cr(vi))的存在 | Determination of certain substances in electrotechnical products — Part 7-1: Hexavalent chromium — Presence of hexavalent chromium(Cr(VI)) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method |
KS C IEC 62323-2008 | 感应接近开关用铁氧体半壶形磁芯的尺寸 | Dimensions of half pot-cores made of ferrite for inductive proximity switches |
KS C IEC 62325-101-2007 | 能源市场传播框架第101部分:总则 | Framework for energy market communications-Part 101:General guidelines |
KS C IEC 62325-102-2007 | 能源市场传播框架第102部分:能源市场模型实例 | Framework for energy market communications-Part 102:Energy market model example |
KS C IEC 62325-501-2007 | 能源市场通信框架.第501部分:ebxml使用的一般指南 | Framework for energy market communications — Part 501: General guidelines for use of ebXML |
KS C IEC 62325-502-2007 | 能源市场通信框架第502部分:ebxml概要 | Framework for energy market communications-Part 502:Profile of ebXML |
KS C IEC 62326-1-2011 | 印制板第1部分:总规范 | Printed boards-Part 1:Generic specification |
KS C IEC 62326-14-2012 | 印制板第14部分:器件嵌入式基板术语/可靠性/设计指南 | Printed boards-Part 14:Device embedded substrate-Terminology/reliability/design guide |
KS C IEC 62326-4-2011 | 印制板第4部分:层间连接的刚性多层印制板分规范第1节:性能详细规范A、B、C级 | Printed boards-Part 4:Rigid multilayer printed boards with interlayer connections-Sectional specification-Section 1:Capability Detail Specification-Performance levels A, B, and C |
KS C IEC 62326-4-2011 | 印制板第4部分:层间连接的刚性多层印制板分规范 | Printed boards-Part 4:Rigid multilayer printed boards with interlayer connections-Sectional specification |
KS C IEC 62328-1-2014 | 多媒体家庭服务器系统.广播接收机用可互换的卷/文件结构.第1部分:一般描述和结构 | Multimedia home server systems — Interchangeable volume/file structure adaptation for broadcasting receivers — Part 1: General description and architecture |
KS C IEC 62328-2-2014 | 多媒体家庭服务器系统.广播接收机用可互换的卷/文件结构.第2部分:一般记录结构 | Multimedia home server systems — Interchangeable volume/file structure adaptation for broadcasting receivers — Part 2: General recording structure |
KS C IEC 62328-3-2014 | 多媒体家庭服务器系统.广播接收机用可互换的卷/文件结构.第3部分:广播系统专用记录结构.ISDB | Multimedia home server systems — Interchangeable volume/file structure adaptation for broadcasting receivers — Part 3: Broadcasting system specific recording structure — ISDB |
KS C IEC 62329-1-2008 | 热缩模制品第1部分:定义和一般要求 | Heat shrinkable moulded shapes-Part 1:Definitions and general requirements |
KS C IEC 62333-1-2008 | 数字装置和设备用噪声抑制片第1部分:定义和一般性能 | Noise suppression sheet for digital devices and equipment-Part 1:Definitions and general properties |
KS C IEC 62335-2014 | 断路器.I类和电池驱动车辆用开关保护接地便携式剩余电流装置 | Circuit breakers — Switched protective earth portable residual current devices for class I and battery powered vehicle applications |
KS C IEC 62337-2014 | 过程工业中电气、仪表和控制系统的调试-特定阶段和里程碑 | Commissioning of electrical, instrumentation and control systems in the process industry — Specific phases and milestones |
KS C IEC 62339-1-2014 | 表面安装流体分配元件的模块化元件接口.第1部分:弹性密封件 | Modular component interfaces for surface-mount fluid distribution components — Part 1: Elastomeric seals |
KS C IEC 62340-2012 | 核电厂安全重要仪表和控制系统应对共同原因故障(CCF)的要求 | Nuclear power plants-Instrumentation and control systems important to safety-Requirements for coping with common cause failure(CCF) |
KS C IEC 62341-1-2007 | 有机发光二极管(OLED)显示器第1-1部分:总规范 | Organic light emitting diode (OLED) displays - Part 1-1 : Generic specification |
KS C IEC 62341-1-2005 | 有机发光二极管(OLED)显示器第2部分:术语和文字符号 | Organic light emitting diode(OLED) displays-Part 2:Terminology and letter symbols |
KS C IEC 62341-5-2007 | 有机发光二极管(OLED)显示器第5部分:环境和机械可靠性试验方法 | Organic light emitting diode(OLED) displays-Part 5:Environmental and mechanical reliability test methods |
KS C IEC 62341-6-2007 | 有机发光二极管(OLED)显示器第6部分:测量方法 | Organic light emitting diode(OLED) displays-Part 6:Measurement methods |
KS C IEC 62341-6-2007 | 有机发光二极管(OLED)显示器第6-2部分:视觉质量的测量方法 | Organic light emitting diode(OLED) displays-Part 6-2:Measuring methods of visual quality |
KS C IEC 62342-2012 | 核电厂对安全重要的仪表和控制系统老化管理 | Nuclear power plants-Instrumentation and control systems important to safety-Management of ageing |
KS C IEC 62351-1-2007 | 电力系统管理及相关信息交换数据和通信安全第1部分:通信网络和系统安全安全安全性安全问题介绍 | Power systems management and associated information exchange-Data and communications security-Part 1:Communication network and system security-Introduction to security issues |
KS C IEC 62351-2-2016 | 电力系统管理及相关信息交换数据和通信安全第2部分:术语表 | Power systems management and associated information exchange-Data and communications security-Part 2:Glossary of terms |
KS C IEC 62351-3-2007 | 电力系统管理及相关信息交换数据和通信安全第3部分:通信网络和系统安全包括TCP/IP的轮廓 | Power systems management and associated information exchange-Data and communications security-Part 3:Communication network and system security-Profiles including TCP/IP |
KS C IEC 62351-4-2016 | 电力系统管理及相关信息交换数据和通信安全第4部分:包括MMS的轮廓 | Power systems management and associated information exchange-Data and communications security-Part 4:Profiles including MMS |
KS C IEC 62351-5-2016 | 电力系统管理及相关信息交换数据和通信安全第5部分:KS C IEC 60870-5及其衍生产品的安全 | Power systems management and associated information exchange-Data and communications security-Part 5:Security for KS C IEC 60870-5 and derivatives |
KS C IEC 62351-6-2010 | 电力系统管理及相关信息交换数据和通信安全第6部分:KS C IEC 61850的安全 | Power systems management and associated information exchange-Data and communications security-Part 6:Security for KS C IEC 61850 |
KS C IEC 62356-1-2005 | 视频记录.12.65mm型D-11格式.第1部分:磁带记录 | Video recording-12.65 mm TYPE D-11 format-Part 1:Tape recording |
KS C IEC 62357-2010 | 电力系统控制和相关通信对象模型、服务和协议的参考体系结构 | Power system control and associated communications-Reference architecture for object models, services and protocols |
KS C IEC 62360-2005 | ISDB(数字广播综合服务)用卫星和地面接收机的基础规范 | Baseline specifications of satellite and terrestrial receivers for ISDB(Integrated Service for Digital Broadcast) |
KS C IEC 62365-2005 | 数字音频.数字输入输出接口.异步传输模式网络上的数字音频传输 | Digital audio-Digital input-output interfacing-Transmission of digital audio over asynchronous transfer mode(ATM) networks |
KS C IEC 62375-2005 | 视频系统(625/50改进的).使用垂直消隐间隔的视频和伴随数据.模拟接口 | Video systems(625/50 progressive)-Video and accompanied data using the vertical blanking interval-Analogue interface |
KS C IEC 62379-1-2014 | 网络化数字音频和视频产品的公共控制接口.第1部分:总则 | Common control interface for networked digital audio and video products — Part 1: General |
KS C IEC 62379-2-2014 | 联网数字音频和视频产品的公共控制接口.第2部分:音频 | Common control interface for networked digital audio and video products — Part 2: Audio |
KS C IEC 62382-2014 | 电气和仪表回路检查 | Electrical and instrumentation loop check |
KS C IEC 62384-2011 | LED模组用直流或交流电子控制装置性能要求 | DC or AC supplied electronic control gear for LED modules-Performance requirements |
KS C IEC 62385-2012 | 核电厂安全重要仪表和控制安全系统仪表通道性能评定方法 | Nuclear power plants-Instrumentation and control important to safety-Methods for assessing the performance of safety system instrument channels |
KS C IEC 62386-101-2012 | 数字可寻址照明接口第101部分:一般要求系统 | Digital addressable lighting interface-Part 101:General requirements-System |
KS C IEC 62386-102-2012 | 数字可寻址照明接口第102部分:一般要求控制装置 | Digital addressable lighting interface-Part 102:General requirements-Control gear |
KS C IEC 62386-201-2012 | 数字可寻址照明接口第201部分:控制装置的特殊要求荧光灯(0型装置) | Digital addressable lighting interface-Part 201:Particular requirements for control gear-Fluorescent lamps(device type 0) |
KS C IEC 62386-202-2012 | 数字可寻址照明接口第202部分:控制装置的特殊要求独立应急照明(装置类型1) | Digital addressable lighting interface-Part 202:Particular requirements for control gear-Self-contained emergency lighting(device type 1) |
KS C IEC 62386-203-2012 | 数字可寻址照明接口第203部分:控制装置的特殊要求放电灯(荧光灯除外)(装置类型2) | Digital addressable lighting interface-Part 203:Particular requirements for control gear-Discharge lamps(excluding fluorescent lamps)(device type 2) |
KS C IEC 62386-204-2012 | 数字可寻址照明接口第204部分:控制装置的特殊要求低压卤素灯(装置类型3) | Digital addressable lighting interface-Part 204:Particular requirements for control gear-Low voltage halogen lamps(device type 3) |
KS C IEC 62386-205-2012 | 数字可寻址照明接口第205部分:控制装置的特殊要求白炽灯电源电压控制器(装置类型4) | Digital addressable lighting interface-Part 205:Particular requirements for control gear-Supply voltage controller for incandescent lamps(device type 4) |
KS C IEC 62386-206-2012 | 数字可寻址照明接口第206部分:控制装置的特殊要求从数字信号转换为直流电压(装置类型5) | Digital addressable lighting interface-Part 206:Particular requirements for control gear-Conversion from digital signal into d.c. voltage(device type 5) |
KS C IEC 62386-207-2012 | 数字可寻址照明接口第207部分:控制装置的特殊要求LED模块(装置类型6) | Digital addressable lighting interface-Part 207:Particular requirements for control gear-LED modules(device type 6) |
KS C IEC 62391-1-2015 | 电子设备用双层固定电容器第1部分:总规范 | Fixed electric double-layer capacitors for use in electronic equipment ― Part 1: Generic specification |
KS C IEC 62391-2-2015 | 电子设备用双层固定电容器第2部分:分规范电力用双层电容器 | Fixed electric double-layer capacitors for use in electronic equipment-Part 2: Sectional specification - Electric double–layer capacitors for power application |
KS C IEC 62397-2012 | 核电厂对安全重要的仪表和控制耐温探测器 | Nuclear power plants-Instrumentation and control important to safety-Resistance temperature detectors |
KS C IEC 62419-2014 | 控制技术.测量仪器的名称与符号规则 | Control technology — Rules for the designation of measuring instruments |
KS C IEC 62420-2014 | 包含一个或多个间隙的同心绞合架空导线 | Concentric lay stranded overhead electrical conductors containing one or more gap(s) |
KS C IEC 62421-2012 | 电子组装技术电子模块 | Electronics assembly technology-Electronic modules |
KS C IEC 62423-2014 | 家用和类似用途的带或不带整体过电流保护的B型剩余电流动作断路器(B型RCCBS和B型RCBOS) | Type B residual current operated circuit-breakers with and without lntegral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs) |
KS C IEC 62430-2014 | 电工电子产品的环保设计 | Environmentally conscious design for electrical and electronic products |
KS C IEC 62439-1-2014 | 工业通信网络.高可用性自动化网络.第1部分:一般概念和计算方法 | Industrial communication networks — High availability automation networks — Part 1: General concepts and calculation methods |
KS C IEC 62439-2-2018 | 工业通信网络.高可用性自动化网络.第2部分:媒体冗余协议(MRP) | INDUSTRIAL COMMUNICATION NETWORKS — HIGH AVAILABILITY AUTOMATION NETWORKS — Part 2: Media Redundancy Protocol(MRP |
KS C IEC 62439-7-2014 | 工业通信网络.高可用性自动化网络.第7部分:基于环的冗余协议(RRP) | Industrial communication networks — High availability automation networks — Part 7: Ring-based Redundancy Protocol(RRP) |
KS C IEC 62440-2014 | 额定电压不超过450/750 V的电缆.使用指南 | Electric cables with a rated voltage not exceeding 450/750 V — Guide to use |
KS C IEC 62446-2012 | 并网光伏系统系统文件编制、调试试验和检验的最低要求 | Grid connected photovoltaic systems-Minimum requirements for system documentation, commissioning tests and inspection |
KS C IEC 62453-303-2014 | 现场设备工具(FDT)接口规范.第303-2部分:通信轮廓集成.IEC 61784 CP 3/4,CP 3/5和CP 3/6 | Field device tool(FDT) interface specification — Part 303-2: Communication profile integration — IEC 61784 CP 3/4, CP 3/5 and CP 3/6 |
KS C IEC 62453-306-2014 | 现场设备工具(FDT)接口规范.第306部分:通信轮廓集成.IEC 61784 CPF 6 | Field device tool(FDT) interface specification — Part 306: Communication profile integration — IEC 61784 CPF 6 |
KS C IEC 62453-309-2014 | 现场设备工具(FDT)接口规范.第309部分:通信轮廓集成.IEC 61784 CPF 9 | Field device tool(FDT) interface specification — Part 309: Communication profile integration — IEC 61784 CPF 9 |
KS C IEC 62455-2014 | 基于Internet协议(IP)和传输流(TS)的服务访问 | Internet protocol (IP) and transport stream (TS) based service access |
KS C IEC 62457-2014 | 多媒体家庭网络.多媒体家用电器IP上的家庭网络通信协议 | Multimedia home networks — Home network communication protocol over IP for multimedia household appliances |
KS C IEC 62465-2012 | 核电厂安全重要仪表和控制电缆老化管理 | Nuclear power plants-Instrumentation and control important to safety-Management of ageing of electrical cabling systems |
KS C IEC 62467-1-2012 | 医用电气设备近距离放射治疗用剂量测量仪器第1部分:井式电离室仪器 | Medical electrical equipment-Dosimetric instruments as used in brachytherapy-Part 1:Instruments based on well-type ionization chambers |
KS C IEC 62471-2-2014 | 灯和灯系统的光生物安全.第2部分:与非激光光辐射安全有关的制造要求指南 | Photobiological safety of lamps and lamp systems — Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety |
KS C IEC 62471-2008 | 灯和灯系统的光生物安全 | Photobiological safety of lamps and lamp systems |
KS C IEC 62473-2012 | 家用洗衣机家用洗衣机机械性能测试方法 | Clothes washing machines for household use-Methods for measuring the mechanical action in household washing machines |
KS C IEC 62474-2017 | 电工产品和电工产品的材料声明 | Material declaration for products of and for the electrotechnical industry |
KS C IEC 62477-1-2014 | 电力电子变换器系统和设备的安全要求第1部分:总则 | Safety requirements for power electronic converter systems and equipment — Part 1: General |
KS C IEC 62480-2014 | 多媒体家庭网络.网络适配器的网络接口 | Multimedia home network — Network interfaces for network adapter |
KS C IEC 62481-1-2014 | 数字生活网络联盟(DLNA)家庭网络设备互操作性指南第1部分:体系结构和协议 | Digital living network alliance(DLNA) home networked device interoperability guidelines — Part 1: Architecture and protocols |
KS C IEC 62481-2-2014 | 数字生活网络联盟(DLNA)家庭网络设备互操作性指南第2部分:DLNA媒体格式 | Digital living network alliance(DLNA) home networked device interoperability guidelines — Part 2: DLNA media formats |
KS C IEC 62484-2014 | 辐射防护仪器.用于检测和识别放射性物质非法贩运的光谱门式监测仪 | Radiation protection instrumentation — Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material |
KS C IEC 62489-1-2017 | 电声学.助听用音频感应环路系统.第1部分:系统部件性能的测量和规定方法 | Electroacoustics — Audio-frequency induction loop systems for assisted hearing — Part 1: Methods of measuring and specifying the performance of system components |
KS C IEC 62489-2-2017 | 电声学.辅助听力用音频感应环路系统.第2部分:与人体暴露极限指南一致性评定用环路低频磁场发射的计算和测量方法 | Electroacoustics — Audio-frequency induction loop systems for assisted hearing — Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure |
KS C IEC 62491-2016 | 工业系统、装置、设备和工业产品电缆和芯线的标签 | Industrial systems, installations and equipment and industrial products ― Labelling of cables and cores |
KS C IEC 62501-2014 | 高压直流输电用电压源换流器(VSC)阀门.电气试验 | Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission — Electrical testing |
KS C IEC 62507-1-2016 | 实现明确信息交换的识别系统要求第1部分:原则和方法 | Identification systems enabling unambiguous information interchange ― Requirements ― Part 1: Principles and methods |
KS C IEC 62509-2013 | 光伏系统用电池充电控制器.性能和功能 | Battery charge controllers for photovoltaic systems — Performance and functioning |
KS C IEC 62525-2015 | 数字测试矢量数据的标准测试接口语言 | Standard Test Interface Language (STIL) for Digital Test Vector Data |
KS C IEC 62526-2015 | 半导体设计环境用标准测试接口语言扩展标准 | Standard for Extensions to Standard Test Interface Language (STIL) for Semiconductor Design Environments |
KS C IEC 62527-2015 | 直流电平规范用标准测试接口语言扩展标准 | Standard for Extensions to Standard Test Interface Language for DC Level Specification |
KS C IEC 62528-2015 | 嵌入式核心集成电路的标准测试方法 | Standard Testability Method for Embedded Core-based Integrated Circuits |
KS C IEC 62534-2012 | 辐射防护仪器高灵敏度手持式放射性物质中子探测仪器 | Radiation protection instrumentation-Highly sensitive hand-held instruments for neutron detection of radioactive material |
KS C IEC 62535-2014 | 绝缘液体用过和未用过的绝缘油中潜在腐蚀性硫的检测试验方法 | Insulating liquids — Test method for detection of potentially corrosive sulphur in used and unused insulating oil |
KS C IEC 62541-4-2018 | 体系结构统一OPC第4部分:服务 | Architecture Unified OPC — Part 4: Services |
KS C IEC 62545-2014 | 电气和电子设备(EIEEE)的环境信息 | Environmental Information on Electrical and Electronic Equipment(EIEEE) |
KS C IEC 62548-2014 | 光伏阵列设计要求 | Photovoltaic(PV) arrays — Design requirements |
KS C IEC 62552-1-2018 | 家用制冷设备特性和试验方法第1部分:一般要求 | Household refrigerating appliances — Characteristics and test methods — Part 1: General requirements |
KS C IEC 62552-2-2018 | 家用制冷设备特性和试验方法第2部分:性能要求 | Household refrigerating appliances — Characteristics and test methods — Part 2: Performance requirements |
KS C IEC 62552-2014 | 家用制冷器具特性和试验方法 | Household refrigerating appliances-Characteristics and test methods |
KS C IEC 62552-3-2018 | 家用制冷器具特性和试验方法第3部分:能耗和体积 | Household refrigerating appliances — Characteristics and test methods — Part 3: Energy consumption and volume |
KS C IEC 62561-1-2014 | 防雷系统元件(LPSC)第1部分:连接元件的要求 | Lightning protection system components(LPSC) — Part 1: Requirements for connection components |
KS C IEC 62561-2-2014 | 防雷系统元件(LPSC)第2部分:导体和接地电极的要求 | Lightning protection system components(LPSC) — Part 2: Requirements for conductors and earth electrodes |
KS C IEC 62561-3-2014 | 防雷系统元件(LPSC)第3部分:隔离火花隙(ISG)的要求 | Lightning protection system components(LPSC) — Part 3: Requirements for isolating spark gaps(ISG) |
KS C IEC 62561-4-2014 | 防雷系统元件(LPSC)第4部分:导体紧固件的要求 | Lightning protection system components(LPSC) — Part 4: Requirements for conductor fasteners |
KS C IEC 62561-5-2014 | 防雷系统元件(LPSC)第5部分:接地电极检查外壳和接地电极密封的要求 | Lightning protection system components(LPSC) — Part 5: Requirements for earth electrode inspection housings and earth electrode seals |
KS C IEC 62561-6-2014 | 防雷系统元件(LPSC)第6部分:雷击计数器(LSC)的要求 | Lightning protection system components(LPSC) — Part 6: Requirements for lightning strike counters(LSC) |
KS C IEC 62561-7-2014 | 防雷系统元件(LPSC)第7部分:接地增强化合物的要求 | Lightning protection system components(LPSC) — Part 7: Requirements for earthing enhancing compounds |
KS C IEC 62582-1-2017 | 核电厂安全重要仪表和控制电气设备状态监测方法第1部分:总则 | Nuclear power plants — Instrumentation and control important to safety — Electrical equipment condition monitoring methods — Part 1: General |
KS C IEC 62585-2017 | 电声学声级计自由场响应校正的测定方法 | Electroacoustics ― Methods to determine corrections to obtain the free-field response of a sound level meter |
KS C IEC 62599-1-2017 | 报警系统第1部分:环境试验方法 | Alarm systems — Part 1: Environmental test methods |
KS C IEC 62599-2-2016 | 报警系统.第2部分:电磁兼容性.火灾和安全报警系统部件的抗扰度要求 | Alarm systems — Part 2: Electromagnetic compatibility — Immunity requirements for components of fire and security alarm systems |
KS C IEC 62606-2014 | 电弧故障检测装置的一般要求 | General requirements for arc fault detection devices |
KS C IEC 62607-3-2018 | 纳米制造关键控制特性第3-1部分:发光纳米材料量子效率 | Nanomanufacturing — Key control characteristics — Part 3-1: Luminescent nanomaterials — Quantum efficiency |
KS C IEC 62619-2017 | 含碱性或其它非酸性电解质的二次电池和蓄电池.工业用二次锂电池和蓄电池的安全要求 | Secondary cells and batteries containing alkaline or other non-acid electrolytes — Safety requirements for secondary Lithium cells and batteries, for use in industrial applications |
KS C IEC 62620-2015 | 含碱性或其它非酸性电解质的二次电池和蓄电池.工业用二次锂电池和蓄电池 | Secondary cells and batteries containing alkaline or other non-acid electrolytes — Secondary lithium cells and batteries for use in industrial applications |
KS C IEC 62624-2017 | 碳纳米管电性能测试方法 | Test methods for measurement of electrical properties of carbon nanotubes |
KS C IEC 62631-3-2017 | 固体绝缘材料的介电和电阻特性.第3-1部分:电阻特性的测定(直流法).体积电阻和体积电阻.一般方法 | Dielectric and resistive properties of solid insulating materials — Part 3—1: Determination of resistive properties (DC methods) — Volume resistance and volume resistivity — General method |
KS C IEC 62631-3-2017 | 固体绝缘材料的介电和电阻特性.第3-2部分:电阻特性的测定(直流法).表面电阻和表面电阻 | Dielectric and resistive properties of solid insulating materials — Part 3—2: Determination of resistive properties (DC methods) — Surface resistance and surface resistivity |
KS C IEC 62631-3-2017 | 固体绝缘材料的介电和电阻特性.第3-3部分:电阻特性的测定(直流法).绝缘电阻 | Dielectric and resistive properties of solid insulating materials — Part 3—3: Determination of resistive properties (DC methods) — lnsulation resistance |
KS C IEC 62642-1-2016 | 报警系统入侵和拦截系统第1部分:系统要求 | Alarm systems — Intrusion and hold-up systems — Part 1: System requirements |
KS C IEC 62642-2-2016 | 报警系统入侵和拦截系统第2-2部分:入侵探测器被动红外探测器 | Alarm systems — Intrusion and hold-up systems — Part 2-2: Intrusion detectors ― Passive infrared detectors |
KS C IEC 62642-2-2017 | 报警系统.入侵和拦截系统.第2-3部分:入侵探测器.微波探测器 | Alarm systems — Intrusion and hold-up systems — Part 2-3: Intrusion detectors — Microwave detectors |
KS C IEC 62642-2-2016 | 报警系统.入侵和拦截系统.第2-4部分:入侵探测器.组合无源红外/微波探测器 | Alarm systems — Intrusion and hold-up systems — Part 2-4: Intrusion detectors — Combined passive infrared/Microwave detectors |
KS C IEC 62642-2-2017 | 报警系统.入侵和拦截系统.第2-5部分:入侵探测器.组合被动红外/超声波 | Alarm systems — Intrusion and hold-up systems — Part 2-5: Intrusion detectors — Combined passive infrared/Ultrasonic |
KS C IEC 62642-2-2017 | 报警系统.入侵和拦截系统.第2-6部分:入侵探测器.开触点(磁性) | Alarm systems — Intrusion and hold-up systems — Part 2-6: Intrusion detectors — Opening contacts(magnetic) |
KS C IEC 62642-2-2017 | 报警系统.入侵和拦截系统.第2-71部分:入侵探测器.玻璃破碎探测器(声学) | Alarm systems — Intrusion and hold-up systems — Part 2-71: Intrusion detectors – Glass break detectors (acoustic) |
KS C IEC 62642-2-2017 | 报警系统.入侵和拦截系统.第2-72部分:入侵探测器.玻璃破碎探测器(声学) | Alarm systems — Intrusion and hold-up systems — Part 2-72: Intrusion detectors – Glass break detectors (acoustic) |
KS C IEC 62642-2-2017 | 报警系统.入侵和拦截系统.第2-73部分:入侵探测器.玻璃破碎探测器(有源) | Alarm systems — Intrusion and hold-up systems — Part 2-73: Intrusion detectors — Glass break detectors (active) |
KS C IEC 62642-4-2016 | 报警系统入侵和拦截系统第4部分:报警装置 | Alarm systems — Intrusion and hold-up systems — Part 4: Warning device |
KS C IEC 62645-2016 | 核电厂.仪表和控制系统.计算机系统安全程序的要求 | Nuclear power plants — Instrumentation and control systems — Requirements for security programmes for computer-based systems |
KS C IEC 62648-2016 | 设备用图形符号IEC出版物中图形符号的包含指南 | Graphical symbols for use on equipment ― Guidelines for the inclusion of graphical symbols in IEC publications |
KS C IEC 62660-1-2016 | 电动道路车辆驱动用二次锂离子电池第1部分:性能试验 | Secondary lithium-ion cells for the propulsion of electric road vehicles-Part 1:Performance testing |
KS C IEC 62660-2-2011 | 电动道路车辆驱动用二次锂离子电池第2部分:可靠性和滥用试验 | Secondary lithium-ion cells for the propulsion of electric road vehicles-Part 2:Reliability and abuse testing |
KS C IEC 62660-3-2017 | 电动道路车辆驱动用二次锂离子电池第3部分:安全要求 | Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements |
KS C IEC 62670-1-2016 | 光挥发浓缩器(CPV)性能试验第1部分:标准条件 | Photovolatic concentrators(CPV) ― Performance testing ― Part 1: Standard conditions |
KS C IEC 62676-1-2016 | 安全应用视频监视系统第1-1部分:系统要求总则 | Video surveillance systems for use in security applications — Part 1-1: System requirements — General |
KS C IEC 62676-1-2018 | 安全应用视频监控系统第1-2部分:系统要求视频传输性能要求 | Video surveillance systems for use in security applications – Part 1-2: System requirements – Performance requirements for video transmission |
KS C IEC 62676-2-2016 | 安全应用中使用的视频监视系统.第2-1部分:视频传输协议.一般要求 | Video surveillance systems for use in security applications — Part 2-1: Video transmission protocols — General requirements |
KS C IEC 62676-3-2016 | 安全应用视频监视系统第3部分:模拟和数字视频接口 | Video surveillance system for use in security applications — Part3: Analog and digital video interfaces |
KS C IEC 62676-4-2016 | 安全应用视频监视系统第4部分:应用指南 | Video surveillance systems for use in security applications — Part 4: Application guidelines |
KS C IEC 62679-1-2015 | 电子纸显示器第1-1部分:术语 | Electronic paper displays ― Part 1-1: Terminology |
KS C IEC 62679-3-2015 | 电子纸显示器第3-2部分:测量方法光电法 | Electronic paper display ― Part 3-2: Measuring method ― Electro-optical |
KS C IEC 62707-1-2018 | LED封装第1部分:一般要求和白色网格 | LED-Binning — Part 1: General requirements and white colour grid |
KS C IEC 62713-2016 | 降低结构外部风险的安全程序 | Safety Procedures for reduction of risk outside a structure |
KS C IEC 62716-2014 | 光伏组件氨腐蚀试验 | Photovoltaic(PV) modules — Ammonia corrosion testing |
KS C IEC 62717-2018 | 一般照明用LED模组.性能要求 | LED modules for general lighting - Performance requirements |
KS C IEC 62722-2-2018 | 灯具性能第2-1部分:LED灯具的特殊要求 | Luminaire performance — Part 2-1: Particular requirements for LED luminaires |
KS C IEC 62765-1-2017 | 核电厂.对安全重要的仪表和控制.传感器和传送器的老化管理.第1部分:压力传送器 | Nuclear powers plants — Instrumentation and control important to safety — Management of ageing of sensors and transmitters — Part 1: Pressure transmitters |
KS C IEC 62770-2015 | 电工流体变压器和类似电气设备用未使用过的天然酯 | Fluids for electrotechnical applications — Unused natural esters for transformers and similar electrical equipment |
KS C IEC 62790-2016 | 光伏组件接线盒安全要求和试验 | Junction boxes for photovoltaic modules ― Safety requirements and tests |
KS C IEC 62817-2016 | 光伏系统太阳能跟踪器设计鉴定 | Photovoltaic system ― Design qualification of solar trackers |
KS C IEC 62821-1-2014 | 额定电压450/750V及以下无卤低烟热塑性绝缘和护套电缆第1部分:一般要求 | Halogen free low smoke thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V — Part 1: General requirements |
KS C IEC 62821-2-2014 | 额定电压450/750V及以下无卤低烟热塑性绝缘和护套电缆第2部分:试验方法 | Halogen free low smoke thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V — Part 2: Test methods |
KS C IEC 62821-3-2014 | 额定电压450/750V及以下无卤低烟热塑性绝缘和护套电缆第3部分:软电缆(软线) | Halogen free low smoke thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V — Part 3: Flexible cables(cords) |
KS C IEC 62852-2016 | 光伏系统用直流连接器安全要求和试验 | Connectors for DC-application in photovoltaic systems ― Safety requirements and tests |
KS C IEC 62860-1-2018 | 有机晶体管基环形振荡器特性的试验方法 | Test methods for the Characterization of Organic Transistor-Based Ring Oscillators |
KS C IEC 62860-2018 | 有机晶体管和材料特性的试验方法 | Test methods for the characterization of organic transistors and materials |
KS C IEC 62868-2018 | 一般照明用有机发光二极管(OLED)面板安全要求 | Organic light emitting diode (OLED) panels for general lighting – Safety requirements |
KS C IEC 62885-2-2018 | 表面清洁器具.第2部分:家用或类似用途的干式真空吸尘器.性能测量方法 | Surface cleaning appliances — Part 2: Dry vacuum cleaners for household or similar use — Methods for measuring the performance |
KS C IEC 62885-3-2018 | 表面清洁器具.第3部分:湿地毯清洁器具.性能测量方法 | Surface cleaning appliances — Part 3: Wet carpet cleaning appliances — Methods for measuring the performance |
KS C IEC 62922-2018 | 一般照明用有机发光二极管(OLED)面板.性能要求 | Organic light emitting diode (OLED) panels for general lighting — Performance requirements |
KS C IEC 80416-1-2011 | 设备用图形符号的基本原则第1部分:登记用图形符号的产生 | Basic principles for graphical symbols for use on equipment-Part 1:Creation of graphical symbols for registration |
KS C IEC 80416-3-2005 | 设备用图形符号基本原则第3部分:图形符号应用指南 | Basic principles for graphical symbols for use on equipment-Part 3:Guidelines for the application of graphical symbols |
KS C IEC 80601-2-2017 | 医用电气设备第2-30部分:自动无创血压计基本安全和基本性能的特殊要求 | Medical electrical equipment-Part 2-30:Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers |
KS C IEC 80601-2-2017 | 医用电气设备第2-35部分:医用热毯、脚垫或床垫加热装置基本安全和基本性能的特殊要求 | Medical electrical equipment-Part 2-35:Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use |
KS C IEC 81346-1-2017 | 工业系统、装置和设备及工业产品结构原则和参照代号第1部分:基本规则 | Industrial systems, installations and equipment and industrial products ㅡ Structuring principles and reference designations ㅡ Part 1: Basic rules |
KS C IEC 81714-2-2011 | 产品技术文件用图形符号的设计第2部分:计算机显式图形符号规范,包括参考图书馆用图形符号及其互换要求 | Design of graphical symbols for use in the technical documentation of products-Part 2:Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange |
KS C IEC 81714-3-2011 | 产品技术文件用图形符号的设计第3部分:连接节点、网络及其编码的分类 | Design of graphical symbols for use in the technical documentation of products-Part 3:Classification of connect nodes, networks and their encoding |
KS C IEC 82045-2-2016 | 文件管理第2部分:元数据元素和信息参考模型 | Document management ― Part 2: Metadata elements and information reference model |
KS C IEC 82079-1-2016 | 使用说明书的编制结构、内容和表述第1部分:总则和详细要求 | Preparation of instructions for use ― Structuring, content and presentation ― Part 1: General principles and detailed requirements |
KS C IEC 82304-1-2018 | 保健软件第1部分:产品安全通用要求 | Health software ─ Part 1: General requirements for product safety |
KS C IEC GUIDE 111-2016 | 高压变电站中的高压电气设备.产品标准的通用建议 | Electrical high-voltage equipment in high-voltage substations — Common recommendations for product standards |
KS C IEC IEEE 62659-2017 | 纳米制造-纳米电子的大规模制造 | Nanomanufacturing — Large scale manufacturing for nanoelectronics |
KS C IEC PAS 62162-2002 | 微电子元件静电放电耐受阈值的场致带电器件模型试验方法 | Field-induced charged-device model test method for electrostatic discharge withstand thresholds of microelectronic components |
KS C IEC PAS 62239-2008 | 电子元件管理计划 | Electronic component management plans |
KS C IEC PAS 62240-2008 | 半导体器件在制造商规定温度范围之外的使用 | Use of semiconductor devices outside manufacturers'specified temperature range |
KS C IEC PAS 62267-2007 | 铁路应用自动化城市引导运输安全要求 | Railway applications-Automated Urban Guided Transport(AUGT) safety requirements |
KS C IEC PAS 62717-2012 | 普通照明用LED模组性能要求 | LED modules for general lighting-Performance requirements |
KS C IEC PAS 62746-10-2018 | 客户能源管理系统和电力管理系统之间的系统接口第10-1部分:开放式自动需求响应(OpenADR 2.0B概要规范) | Systems interface between customer energy management system and the power management system — Part 10-1: Open Automated Demand Response(OpenADR 2.0b Profile Specification) |
KS C IEC TR 60444-4-2018 | 用π网络零相位技术测量石英晶体元件参数第4部分:30MHz及以下石英晶体元件的负载谐振频率f l、负载谐振电阻r l的测量方法及其他导出值的计算 | Measurement of quartz crystal unit parameters by zero phase technique in a pi-network ― Part 4: Method for the measurement of the load resonance frequency f L , load resonance resistance R L and the calculation of other derived values of quartz crystal units, up to 30 MHz |
KS C IEC TR 60479-4-2014 | 电流对人和牲畜的影响.第4部分:雷击的影响 | Effects of current on human beings and livestock — Part 4: Effects of lightning strokes |
KS C IEC TR 60977-2017 | 医用电气设备医用电子加速器功能特性指南 | Medical electrical equipment-Medical electron accelerators-Guidelines for functional performance characteristics |
KS C IEC TR 61000-1-2012 | 电磁兼容性(EMC)-第1-5部分:一般-大功率电磁(HPEM)对民用系统的影响 | Electromagnetic compatibility(EMC)-Part 1-5:General-High power electromagnetic(HPEM) effects on civil systems |
KS C IEC TR 61000-4-2012 | 电磁兼容(EMC)-第4-32部分:试验和测量技术-高空电磁脉冲(HEMP)模拟器概要 | Electromagnetic compatibility(EMC)-Part 4-32:Testing and measurement techniques-High-altitude electromagnetic pulse (HEMP) simulator compendium |
KS C IEC TR 61000-4-2012 | 电磁兼容性(EMC)-第4-35部分:试验和测量技术-HPEM模拟器概要 | Electromagnetic compatibility(EMC)-Part 4-35:Testing and measurement techniques-HPEM simulator compendium |
KS C IEC TR 61000-5-2012 | 电磁兼容性(EMC)-第5-3部分:安装和缓解指南-HEMP保护概念 | Electromagnetic compatibility(EMC)-Part 5-3:Installation and mitigation guidelines-HEMP protection concepts |
KS C IEC TR 61000-5-2012 | 电磁兼容性(EMC)-第5-6部分:安装和缓解指南-外部电磁影响的缓解 | Electromagnetic compatibility(EMC)-Part 5-6:Installation and mitigation guidelines-Mitigation of external EM influences |
KS C IEC TR 61158-1-2014 | 测量和控制用数字数据通信.工业控制系统用子段总线.第1部分:IEC61158系列的综述和指南 | Digital data communications for measurement and control — Fieldbus for use in industrial control systems — Part 1: Overview and guidance for IEC 61158 series |
KS C IEC TR 61352-2011 | 集成电路助记法及符号 | Mnemonics and symbols for integrated circuits |
KS C IEC TR 61734-2011 | 二进制逻辑和模拟元件符号的应用 | Application of symbols for binary logic and analogue elements |
KS C IEC TR 61850-80-2018 | 电力设施自动化用通信网络和系统.第80-3部分:网络协议要求和技术选择的映射 | Communication networks and system for power utility automation — Part 80-3: Mapping to web protocol-Requirements and technical choices |
KS C IEC TR 61850-90-2014 | 电力设施自动化用通信网络和系统.第90-5部分:根据IEEEC37.118用IEC 61850传输同步器信息 | Communication networks and systems for power utility automation — Part 90-5: Use of IEC 61850 to transmit synchrophasor information according to IEEE C37.118 |
KS C IEC TR 61850-90-2017 | 电力设施自动化用通信网络和系统第90-7部分:分布式能源系统中电力转换器的目标模型 | Communication networks and systems for power utility automation – Part 90-7: Object models for power converters in distributed energy resources (DER) systems |
KS C IEC TR 61908-2015 | 工业数据字典结构、利用和实施的技术路线图 | The technology roadmap for industry data dictionary structure, utilization and implementation |
KS C IEC TR 61926-1-2015 | 设计自动化第1-1部分:图集测试语言的协调 | Design automation ― Part 1-1: Harmonization of ATLAS test languages |
KS C IEC TR 61948-1-2018 | 核医学仪器常规试验第1部分:γ辐射计数系统 | Nuclear medicine instrumentation — Routine tests — Part 1: Gamma radiation counting system |
KS C IEC TR 61948-2-2018 | 核医学仪器常规试验第2部分:闪烁照相机和单光子发射计算机断层成像 | Nuclear medicine instrumentation — Routine tests — Part 2: Scintillation cameras and single photon emission computed tomography imaging |
KS C IEC TR 61948-3-2017 | 核医学仪器例行试验第3部分:正电子发射断层摄影 | Nuclear medicine instrumentation ─ Routine tests ─ Part 3: Positron emission tomographs |
KS C IEC TR 61948-4-2017 | 核医学仪器例行试验第4部分:放射性核素校准器 | Nuclear medicine instrumentation ─ Routine tests ─ Part 4: Radionuclide calibrators |
KS C IEC TR 62014-3-2015 | 电子设计自动化库第3部分:EMI行为模拟用集成电路模型 | Electronic design automation libraries ― Part 3: Models of integrated circuits for EMI behavioural simulation |
KS C IEC TR 62051-1-2017 | 电量测量.仪表读数、费率和负载控制的数据交换.术语汇编.第1部分:使用DLMS/COSEM的计量设备的数据交换相关术语 | Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM |
KS C IEC TR 62221-2005 | 光纤测量方法微弯灵敏度 | Optical fibres-Measurement methods-Microbending sensitivity |
KS C IEC TR 62351-12-2018 | 电力系统管理和相关信息交换数据和通信安全第12部分:分布式能源(DER)网络物理系统电力系统的弹性和安全建议 | Power systems management and associated information exchange – Data and communications security – Part 12: Resilience and security recommendations for power systems with distributed energy resources (DER) cyber-physical systems |
KS C IEC TR 62357-1-2017 | 电力系统管理及相关信息交换第1部分:参考体系结构 | Power systems management and associated information exchange ― Part 1: Reference architecture |
KS C IEC TR 62476-2011 | 电气和电子产品中物质使用限制的产品评价指南 | Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products |
KS C IEC TR 62687-2015 | 设备用图形符号术语 | Graphical symbols for use on equipment ― Terminology |
KS C IEC TR 62696-2018 | 灯具——适用于IK规范IEC 62262 | Luminaires – Application of the IK code IEC 62262 |
KS C IEC TR 62711-2017 | 量度继电器、仪器及有关装置的符号的助记法和名称 | Mnemonics and designations of symbols for measuring relays, instruments and related device |
KS C IEC TR 62746-2-2018 | 用户能源管理系统和电力管理系统之间的系统接口第2部分:用例和要求 | Systems interface between customer energy management system and the power management system — Part 2: Use cases and requirements |
KS C IEC TR 62854-2018 | 照明设备的锐边试验装置和试验程序.锐边锐度试验 | Sharp edge testing apparatus and test procedure for lighting equipment — Tests for sharpness of edge |
KS C IEC TS 60110-2-2017 | 感应加热装置用电力电容器第2部分:老化试验、破坏试验和内部熔丝断开要求 | Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses |
KS C IEC TS 60318-7-2017 | 电声学人的头和耳模拟器第7部分:助听器测量用头和躯干模拟器 | Electroacoustics ― Simulators of human head and ear ― Part 7: Head and torso simulator for the measurement of hearing aids |
KS C IEC TS 60870-5-2014 | 远动设备和系统.第5-604部分:IEC 60870-5-104配套标准的一致性试验箱 | Telecontrol equipment and systems — Part 5-604: Conformance test cases for the IEC 60870-5-104 companion standard |
KS C IEC TS 61000-5-2012 | 电磁兼容性(EMC)-第5-8部分:安装和缓解指南-分布式基础设施的HEMP保护方法 | Electromagnetic compatibility(EMC)-Part 5-8:Installation and mitigation guidelines-HEMP protection methods for the distributed infrastructure |
KS C IEC TS 61000-5-2012 | 电磁兼容性(EMC)-第5-9部分:安装和缓解指南-HEMP和HPEM的系统级敏感性评估 | Electromagnetic compatibility(EMC)-Part 5-9:Installation and mitigation guidelines-System-level susceptibility assessments for HEMP and HPEM |
KS C IEC TS 61094-7-2017 | 电声学.测量传声器.第7部分:实验室标准传声器的自由场和压力灵敏度水平差值 | Electroacoustics — Measurement microphones — Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones |
KS C IEC TS 61149-2014 | 移动无线电设备的安全操作和操作指南 | Guide for safe handling and operation of mobile radio equipment |
KS C IEC TS 61200-52-2016 | 电气安装指南第52部分:电气设备的选择和安装布线系统 | Electrical Installation Guide-Part 52:Selection and erection of electrical equipment-Wiring systems |
KS C IEC TS 61400-26-2014 | 风力涡轮机.第26-1部分:风力涡轮机发电系统的基于时间的可用性 | Wind turbines — Part 26-1: Time-based availability for wind turbine generating systems |
KS C IEC TS 61724-2-2018 | 光伏系统性能第2部分:容量评估方法 | Photovoltaic system performance - Part 2: Capacity evaluation method |
KS C IEC TS 61724-3-2018 | 光伏系统性能第3部分:能源评价方法 | Photovoltaic system performance - Part 3: Energy evaluation method |
KS C IEC TS 61850-80-2018 | 电力设施自动化用通信网络和系统第80-4部分:COSEM对象模型(IEC 62056)到IEC 61850数据模型的转换 | Communication networks and systems for power utility automation – Part 80-4: Translation from the COSEM object model (IEC 62056) to the IEC 61850 data model |
KS C IEC TS 62045-1-2014 | 多媒体安全.使用和停用设备和系统的隐私保护指南.第1部分:总则 | Multimedia security — Guideline for privacy protection of equipment and systems in and out of use — Part 1: General |
KS C IEC TS 62098-2005 | 基于微处理器仪表的评价方法 | Evaluation methods for microprocessor-based instruments |
KS C IEC TS 62224-2014 | 多媒体家庭服务器系统.数字版权管理的概念模型 | Multimedia home server systems — Conceptual model for digital rights management |
KS C IEC TS 62257-1-2016 | 农村电气化用小型可再生能源和混合系统的建议第1部分:农村电气化概述 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 1:General introduction to rural electrification |
KS C IEC TS 62257-12-2016 | 农村电气化用小型可再生能源和混合系统的建议第12-1部分:农村电气化系统用自镇流灯(CFL)的选择和家用照明设备的建议 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 12-1:Selection of self-ballasted lamps(CFL) for rural electrification systems and recommendations for household lighting equipment |
KS C IEC TS 62257-2-2016 | 农村电气化用小型可再生能源和混合系统的建议第2部分:从要求到一系列电气化系统 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 2:From requirements to a range of electrification systems |
KS C IEC TS 62257-3-2016 | 农村电气化用小型可再生能源和混合系统的建议第3部分:项目开发和管理 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 3:Project development and management |
KS C IEC TS 62257-4-2016 | 农村电气化用小型可再生能源和混合系统的建议第4部分:系统选择和设计 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 4:System selection and design |
KS C IEC TS 62257-5-2016 | 农村电气化用小型可再生能源和混合系统的建议第5部分:电气危害防护 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 5:Protection against electrical hazards |
KS C IEC TS 62257-6-2016 | 农村电气化用小型可再生能源和混合系统的建议第6部分:验收、运行、维护和更换 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 6:Acceptance, operation,maintenance and replacement |
KS C IEC TS 62257-8-2016 | 农村电气化用小型可再生能源和混合系统的推荐规范第8-1部分:独立电气化系统用电池和电池管理系统的选择发展中国家使用的汽车浸水式铅酸电池的特殊情况 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 8-1:Selection of batteries and battery management systems for stand-alone electrification systems-Specific case of automotive flooded lead-acid batteries available in developing countries |
KS C IEC TS 62257-9-2016 | 农村电气化用小型可再生能源和混合系统的建议第9-2部分:微型电网 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 9-2:Microgrids |
KS C IEC TS 62257-9-2016 | 农村电气化用小型可再生能源和混合系统的建议第9-3部分:集成系统用户界面 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 9-3:Integrated system-User interface |
KS C IEC TS 62257-9-2016 | 农村电气化用小型可再生能源和混合系统的建议第9-4部分:综合系统用户装置 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 9-4:Integrated system-User installation |
KS C IEC TS 62257-9-2016 | 农村电气化用小型可再生能源和混合系统的建议第9-5部分:综合系统农村电气化项目用便携式光伏灯的选择 | Recommendations for small renewable energy and hybrid systems for rural electrification-Part 9-5:Integrated system-Selection of portable PV lanterns for rural electrification projects |
KS C IEC TS 62282-1-2014 | 燃料电池技术.第2部分:术语 | Fuel Cell Technologies — Part 2: Terminology |
KS C IEC TS 62282-7-2016 | 燃料电池技术第7-2部分:试验方法固体氧化物燃料电池(SOFC)单电池和叠层性能试验 | Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC) |
KS C IEC TS 62318-2014 | 多媒体系统和设备.多媒体家庭服务器系统.家庭服务器概念模型 | Multimedia systems and equipment — Multimedia home server systems — Home server conceptual model |
KS C IEC TS 62361-102-2018 | 电力系统管理和相关信息交换.长期互操作性.第102部分:CIM.IEC 61850协调 | Power systems management and associated information exchange — Interoperability in the long term — Part 102: CIM — IEC 61850 harmonization |
KS C IEC TS 62370-2017 | 电声学.声强测量仪器.电磁和静电兼容性要求和试验程序 | Electroacoustics — Instruments for the measurement of sound intensity — Electromagnetic and electrostatic compatibility requirements and test procedures |
KS C IEC TS 62393-2016 | 便携式和手持多媒体设备移动计算机电池运行时间测量 | Portable and hand-held multimedia equipment-Mobile computers-Battery run-time measurement |
KS C IEC TS 62607-2-2017 | 纳米制造关键控制特性- | Nanomanufacturing ― Key control characteristics — |
KS C IEC TS 62642-7-2016 | 报警系统入侵和拦截系统第7部分:应用指南 | Alarm systems — Intrusion and hold-up systems — Part 7: Application guidelines |
KS C IEC TS 62727-2014 | 光伏系统.太阳能跟踪器规范 | Photovoltaic systems — Specification for solar trackers |
KS C IEC TS 62746-3-2018 | 用户能源管理系统与电力管理系统的系统接口第3部分:体系结构 | Systems interface between customer energy management system and the power management system — Part 3: Architecture |
KS C IEC TS 62972-2018 | 一般照明.有机发光二极管(OLED)产品和相关设备.术语和定义 | General lighting — Organic light emitting diode (OLED) products and related equipment — Terms and definitions |
KS C IEC/PAS 62569-1-2016 | 产品信息总规范第1部分:原则和方法 | Generic specification of information on products ― Part 1: Principles and methods |
KS C IEC/TR 60092-370-2017 | 船舶电气设施.第370部分:包括射频电缆的电信和数据传输用电缆的选择指南 | Electrical installations in ships — Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables |
KS C IEC/TR 62635-2017 | 制造商和回收商提供的使用寿命结束信息和电气和电子设备可回收率计算指南 | Guidelines for end-of-life information provided by manufacturers and recyclers and for recyclability rate calculation of electrical and electronic equipment |
KS C IEC/TR 62725-2017 | 电工电子产品及系统温室气体排放量化方法分析 | Analysis of quantification methodologies of greenhouse gas emissions for electrical and electronic products and systems |
KS C IEC/TR 62726-2017 | 从电气和电子产品及系统基线定量减少温室气体排放的指南 | Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems |
KS C IEC/TS 61400-26-2016 | 风力涡轮机.第26-2部分:风力涡轮机基于生产的可用性 | Wind turbines — Part 26-2: Production-based availability for wind turbines |
KS C IEC/TS 62804-1-2016 | 光伏(PV)组件.电位诱导降解检测的试验方法.第1部分:晶体硅 | Photovoltaic(PV) modules — Test methods for the detection of potential-induced degradation — Part 1: Crystalline silicon |
KS C ISO 11784-A-2014 | 动物射频识别代码结构 | Radio-frequency identification of animals ― Code structure |
KS C ISO 11785-A-2014 | 动物的射频识别技术概念 | Radio-frequency identification of animals — Technical concept |
KS C ISO 12405-1-2012 | 电动道路车辆锂离子牵引蓄电池组及系统试验规范第1部分:大功率应用 | Electrically propelled road vehicles-Test specification for lithium-ion traction battery packs and systems-Part 1:High-power applications |
KS C ISO 14270-2016 | 电阻点焊、缝焊和凸焊的机械撕裂试验用样品尺寸及程序 | Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds |
KS C ISO 18594-2007 | 电阻点焊、凸焊和缝焊测定铝和钢材料的过渡电阻的方法 | Resistance spot-, projection-, and seam-welding-Method for determining the transition resistance on aluminium and steel material |
KS C ISO 22829-2007 | 电阻焊-带集成变压器的焊枪用变压器整流器-频率为1000Hz的变压器整流器 | Resistance welding-Transformer-rectifier for welding guns with integrated transformers-Transformer-rectifier units operating at 1 000 Hz frequency |
KS C ISO 5822-2016 | 点焊设备锥度塞规和锥度环规 | Spot welding equipment-Taper plug gauges and taper ring gauges |
KS C ISO 5826-2015 | 电阻焊设备变压器通用技术条件 | Resistance welding equipment-Transformers-General specifications applicable to all transformers |
KS C ISO 5827-2016 | 点焊-电极支撑和夹具 | Spot welding-Electrode back-ups and clamps |
KS C ISO 5828-2016 | 电阻焊设备带水冷片接线柱的二次连接电缆尺寸和特性 | Resistance welding equipment-Secondary connecting cables with terminals connected to water-cooled lugs-Dimensions and characteristics |
KS C ISO 6210-1-2016 | 机器人电阻焊枪气缸第1部分:一般要求 | Cylinders for robot resistance welding guns-Part 1:General requirements |
KS C ISO 693-2016 | 缝焊轮坯尺寸 | Dimensions of seam welding wheel blanks |
KS C ISO 80601-2-2017 | 医用电气设备第2-13部分:麻醉系统安全和基本性能的特殊要求 | Medical electrical equipment-Part 2-13:Particular requirements for the safety and essential performance of anaesthetic systems |
KS C ISO 80601-2-2018 | 医用电气设备.第2-56部分:体温测量用临床温度计的基本安全和基本性能的特殊要求 | Medical electrical equipment — Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
KS C ISO 80601-2-2014 | 医用电气设备.第2-61部分:脉搏血氧计设备基本安全和基本性能的特殊要求 | Medical electrical equipment — Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
KS C ISO 8167-2016 | 电阻焊用凸出部位 | Projections for resistance welding |
KS C ISO 8205-1-2016 | 电阻焊水冷次级线圈连接电缆第1部分:双导体连接电缆的尺寸和要求 | Water-cooled secondary connection cables for resistance welding-Part 1:Dimensions and requirements for double-conductor connection cables |
KS C ISO 8205-2-2016 | 电阻焊水冷次级线圈连接电缆第2部分:单芯连接电缆的尺寸和要求 | Water-cooled secondary connection cables for resistance welding-Part 2:Dimensions and requirements for single-conductor connection cables |
KS C ISO 8205-3-2015 | 电阻焊水冷次级线圈连接电缆第3部分:试验要求 | Water-cooled secondary connection cables for resistance welding-Part 3:Test requirements |
KS C ISO 8430-1-2016 | 电阻点焊电极夹第1部分:锥度固定1:10 | Resistance spot welding-Electrode holders-Part 1:Taper fixing 1:10 |
KS C ISO 8430-2-2016 | 电阻点焊电极夹第2部分:莫氏锥度固定 | Resistance spot welding-Electrode holders-Part 2:Morse taper fixing |
KS C ISO 8430-3-2016 | 电阻点焊电极夹第3部分:直柄端推固定 | Resistance spot welding-Electrode holders-Part 3:Parallel shank fixing for end thrust |
KS C ISO 865-2016 | 凸焊机面的槽 | Slots in platens for projection welding machines |
KS C ISO 9312-2015 | 电阻焊设备电极支撑用绝缘销 | Resistance welding equipment-Insulated pins for use in electrode backs-ups |
KS C ISO 9313-2016 | 电阻点焊设备冷却管 | Resistance spot welding equipment-Cooling tubes |
KS C ISO TS 80004-1-2017 | 纳米技术.词汇.第1部分:核心术语 | Nanotechnologies — Vocabulary — Part 1: Core terms |
KS C ISO/IEC 62990-1-2018 | 工作场所大气.第1部分:气体探测器.有毒气体探测器的性能要求 | Workplace Atmospheres — Part 1: Gas detectors — Performance requirements of detectors for toxic gases |
KS C ISO/TS 80004-2-2018 | 纳米技术.词汇.第2部分:纳米物体 | Nanotechnologies - Vocabulary - Part 2: Nano-objects |